Herbs carbonization and activation for fast sorption of nitrate ions: a new challenge for a full treatment of groundwater pollution.

The evolution of low-cost ecotechnologies in water treatment and purification is highly increased. Face to the growing global demand for eco-friendly water treatment materials, the non-valorized herb-based biomass covering a large area could be a promising alternative. Herbs (HB) are currently one of the cheapest biomasses. Therefore, the utilization of HB for environmental applications is relevant. HB was treated and activated in this work to produce an eco-friendly adsorbent for nitrate removal from groundwater. HB was treated with modified carbonization at 220 °C to produce highly reactive biochar (BCH). Ammonium groups (AM) are immobilized covalently over the BCH surface, and then, the resulting materials BCH-AM are fully characterized. Results showed that ammonium is successfully grafted at the BCH surface, producing a highly stable material. Measurements on nitrate ion adsorption revealed that BCH-AM are of great interest as 80% of nitrate ions (NO3-) were removed. Importantly, the eco-friendly BCH-AM demonstrated the ability to easily desorb the nitrate ions using Na2CO3 as a green eluent. Parametric studies confirmed the effectiveness of the prepared adsorbent and approved that the adsorption occurred by electrostatic interactions. To demonstrate the performance of the adsorbent, BCH-AM was evaluated to remove NO3- from groundwater upstream in a water treatment plant. This work opens an immense perspective for herb biomass to be the actual challenge to resolve environmental problems.

An Electrolyte-Gated Graphene Field-Effect Transistor for Detection of Gadolinium(III) in Aqueous Media.

In this work, an electrolyte-gated graphene field-effect transistor is developed for Gd3+ ion detection in water. The source and drain electrodes of the transistor are fabricated by photolithography on polyimide, while the graphene channel is obtained by inkjet-printing a graphene oxide ink subsequently electro-reduced to give reduced graphene oxide. The Gd3+-selective ligand DOTA is functionalized by an alkyne linker to be grafted by click chemistry on a gold electrode without losing its affinity for Gd3+. The synthesis route is fully described, and the ligand, the linker and the functionalized surface are characterized by electrochemical analysis and spectroscopy. The as functionalized electrode is used as gate in the graphene transistor so to modulate the source-drain current as a function of its potential, which is itself modulated by the concentration of Gd3+captured on the gate surface. The obtained sensor is able to quantify Gd3+ even in a sample containing several other potentially interfering ions such as Ni2+, Ca2+, Na+ and In3+. The quantification range is from 1 pM to 10 mM, with a sensitivity of 20 mV dec-1 expected for a trivalent ion. This paves the way for Gd3+ quantification in hospital or industrial wastewater.

Advances in Amine-Surface Functionalization of Inorganic Adsorbents for Water Treatment and Antimicrobial Activities: A Review.

In the last decade, adsorption has exhibited promising and effective outcomes as a treatment technique for wastewater contaminated with many types of pollutants such as heavy metals, dyes, pharmaceuticals, and bacteria. To achieve such effectiveness, a number of potential adsorbents have been synthesized and applied for water remediation and antimicrobial activities. Among these inorganic adsorbents (INAD), activated carbon, silica, metal oxide, metal nanoparticles, metal-organic fibers, and graphene oxide have been evaluated. In recent years, significant efforts have been made in the development of highly efficient adsorbent materials for gas and liquid phases. For gas capture and water decontamination, the most popular and known functionalization strategy is the chemical grafting of amine, due to its low cost, ecofriendliness, and effectiveness. In this context, various amines such as 3-aminopropyltriethoxysilane (APTES), diethanolamine (DEA), dendrimer-based polyamidoamine (PAMAM), branched polyethyleneimine (PEI), and others are employed for the surface modification of INADs to constitute a large panel of resource and low-cost materials usable as an alternative to conventional treatments aimed at removing organic and inorganic pollutants and pathogenic bacteria. Amine-grafted INAD has long been considered as a promising approach for the adsorption of both inorganic and organic pollutants. The goal of this review is to provide an overview of surface modifications through amine grafting and their adsorption behavior under diverse conditions. Amine grafting strategies are investigated in terms of the effects of the solvent, temperature, and the concentration precursor. The literature survey presented in this work provides evidence of the significant potential of amine-grafted INAD to remove not only various contaminants separately from polluted water, but also to remove pollutant mixtures and bacteria.

Phytoremediation of PCB: contaminated Algerian soils using native agronomics plants.

Pot cultivation experiments were conducted to assess the phytoremediation potential of two local agronomic plants, namely Avena sativa and Vicia sativa. Several soils with long-standing contamination and different levels of Polychlorinated biphenyl (PCB) contamination were used for this study. The soil samples came from different regions of Algeria and had different physico-chemical parameters. We studied the influence of these parameters on remediation potential of the two tested plants. The removal rate of the seven PCBs (PCB 28, 52, 101, 138, 153, 156 and 180) was examined after 40 and 90 days. The results showed that the presence of the plants reduced significantly the overall PCB content, ranging initially from 1.33-127.9 mg kg1. After 90 days, the forage plant Vicia sativa allowed us to reach an excess dissipation rate of 56.7% compared to the unplanted control for the most polluted soil. An average dissipation rate of 50% was obtained in the moderately polluted soil. The less contaminated soil had an excess dissipation rate of about 24% for both plants and a predominant dissipation of the low chlorinated PCBs.

Modification of fibrous membrane for organic and pathogenic contaminants removal: from design to application.

In this study, a flexible multifunctional fibrous membrane for heterogeneous Fenton-like removal of organic and pathogenic contaminants from wastewater was developed by immobilizing zerovalent iron nanoparticles (Fe-NPs) on an amine/thiol grafted polyester membrane. Full characterization of the resulting polyester membranes allowed validation of successful grafting of amine/thiol (NH2 or SH) functional groups and immobilization of Fe-NPs (50-150 nm). The Fenton-like functionality of iron immobilized fibrous membranes (PET-Fe, PET-Si-NH2-Fe, PET-NH2-Fe, and PET-SH-Fe) in the presence of hydrogen peroxide (H2O2) was comparatively studied in the removal of crystal violet dye (50 mg L-1). The effect of pH, amount of iron and H2O2 concentration on dye removal was systematically investigated. The highest dye removal yield reached 98.87% in 22 min at a rate constant 0.1919 min-1 (R 2 = 95.36) for PET-SH-Fe providing 78% toxicity reduction assessed by COD analysis. These membranes could be reused for up to seven repeated cycles. Kinetics and postulated mechanism of colour removal were proposed by examining the above results. In addition, the resultant membranes showed substantial antibacterial activity against pathogenic bacteria (Staphylococcus epidermidis, Escherichia coli) strains studied through disc diffusion-zone inhibitory and optical density analysis. These findings are of great importance because they provide a prospect of textile-based flexible catalysts in heterogeneous Fenton-like systems for environmental and green chemistry applications.

Heterogeneous-phase Sonogashira cross-coupling reaction on COC surface for the grafting of biomolecules - Application to isatin.

The grafting of 5-iodoisatin heterocycle on a cyclic olefin copolymer (COC) and a gold surface was performed using a heterogeneous phase Sonogashira reaction consisting of coupling 5-iodoisatin with an arylalkyne previously introduced onto the surfaces. This optimized strategy takes advantage of the well-established methodology to functionalize COC or gold surfaces using aryldiazonium surface chemistry. Herein, we reported the first example of an isatin decorated polymeric or metallic surface. The surfaces were analyzed with a combination of techniques such as IR (Infrared spectroscopy), XPS (X-Ray photoelectron spectroscopy) and SPR (surface plasmon resonance). Docking studies showed that isatin and two derivatives interact with AmiC, a dimeric protein produced by Pseudomonas aeruginosa. Bacterial adhesion on isatin-COC platform was also observed. This general strategy for robust surface functionalization represents an easy approach for patterning surfaces with compounds of biological interest, allowing access to a large panel of original biosensors.

Influence of a mixture of metals on PAHs biodegradation processes in soils.

In order to assess the effect of mixed pollutants, the influence of different concentration levels of a mixture of metals (Cr, Co, Pb, Mn, Ni, Cu, Zn) on the biodegradation of some PAHs (phenanthrene, fluoranthene, pyrene, benzo[b]fluoranthene and benzo[a]pyrene) in soil samples was evaluated. To do so, groups of microcosms of a natural soil from the region of Sabadell (Barcelona, Spain) were prepared as a reproduction of the native environment at laboratory scale, under controlled conditions. Mixtures of PAHs and metals were carefully selected, according to soil characterization and microbiological growth preliminary assays, and were added to microcosms. These microcosms were analyzed at various times, along two months, to obtain PAHs dissipation time-courses. A first-order kinetic modelling allowed obtaining different rate constants and DT50 values as a function of the metal levels introduced in microcosms. As a general observation, the higher the concentration of metals, the lower the biodegradation of PAHs of 3-4 rings (phenanthrene, fluoranthene and pyrene). On the other hand, no important effect on the biodegradation of higher molecular weight PAHs (benzo[b]fluoranthene and benzo[a]pyrene) was observed at the different concentration levels of metals tested.

Development of a novel functional core-shell-shell nanoparticles: From design to anti-bacterial applications.

This article reports the synthesis and functionalization of a novel CuO@SiO2-APTES@Ag0 core-shell-shell material using a simple and low-cost process. The growth, design strategies and synthesis approach are the key factors for the development of CuO@SiO2-APTES@Ag0 as efficient material with enhanced antibacterial activity. We investigated the morphology, surface charge, structure and stability of our new core-shell-shell by atomic force microscopy, scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared and UV-visible spectroscopies, zeta potential measurements, and differential scanning calorimetry. The covalent surface grafting of APTES (3-(aminopropyl)triethoxysilane) onto CuO@SiO2 involving electrostatic interactions was confirmed. Size measurements and Scanning electron images showed that both APTES grafting and SiO2/Ag shells dropped on the surface of CuO produced structural compaction. UV-Vis spectroscopy proved to be a fast and convenient way to optically detect SiO2 shell on the surface of colloids. Additionally, the Ag-decorated CuO@SiO2-APTES surfaces were found to possess antibacterial activity and thermally more stable than undecorated surfaces. CuO@SiO2-APTES@Ag0 core-shell had antibacterial properties against Gram-positive bacteria making it a promising candidate for antibacterial applications.

Chemical modification of the cocoa shell surface using diazonium salts.

The outer portion of the cocoa bean, also known as cocoa husk or cocoa shell (CS), is an agrowaste material from the cocoa industry. Even though raw CS is used as food additive, garden mulch, and soil conditioner or even burnt for fuel, this biomass material has hardly ever been investigated for further modification. This article proposes a strategy of chemical modification of cocoa shell to add value to this natural material. The study investigates the grafting of aryl diazonium salt on cocoa shell. Different diazonium salts were grafted on the shell surface and characterized by infrared spectroscopy and scanning electronic microscopy imaging. Strategies were developed to demonstrate the spontaneous grafting of aryl diazonium salt on cocoa shell and to elucidate that lignin is mainly involved in immobilizing the phenyl layer.

Atmospheric Solid Analysis Probe-Ion Mobility Mass Spectrometry: An Original Approach to Characterize Grafting on Cyclic Olefin Copolymer Surfaces.

A cyclic olefin copolymer (COC) was grafted with aryl layers from aryldiazonium salts, and then we combined infrared spectrometry, atomic force microscopy (AFM), and ion mobility mass spectrometry with atmospheric solid analysis probe ionization (ASAP-IM-MS) to characterize the aryl layers. ASAP is a recent atmospheric ionization method dedicated to the direct analysis of solid samples. We demonstrated that ASAP-IM-MS is complementary to other techniques for characterizing bromine and sulfur derivatives of COC on surfaces. ASAP-IM-MS was useful for optimizing experimental grafting conditions and to elucidate hypotheses around aryl layer formation during the grafting process. Thus, ASAP-IM-MS is a good candidate tool to characterize covalent grafting on COC surfaces.

Gamma-aminobutyric acid acts as a specific virulence regulator in Pseudomonas aeruginosa.

Gamma-aminobutyric acid (GABA) is widespread in the environment and can be used by animal and plants as a communication molecule. Pseudomonas species, in particular fluorescent ones, synthesize GABA and express GABA-binding proteins. In this study, we investigated the effects of GABA on the virulence of Pseudomonas aeruginosa. While exposure to GABA (10 µM) did not modify either the growth kinetics or the motility of the bacterium, its cytotoxicity and virulence were strongly increased. The Caenorhabditis elegans 'fast killing test' model revealed that GABA acts essentially through an increase in diffusible toxin(s). GABA also modulates the biofilm formation activity and adhesion properties of PAO1. GABA has no effect on cell surface polarity, biosurfactant secretion or on the lipopolysaccharide structure. The production of several exo-enzymes, pyoverdin and exotoxin A is not modified by GABA but we observed an increase in cyanogenesis which, by itself, could explain the effect of GABA on P. aeruginosa virulence. This mechanism appears to be regulated by quorum sensing. A proteomic analysis revealed that the effect of GABA on cyanogenesis is correlated with a reduction of oxygen accessibility and an over-expression of oxygen-scavenging proteins. GABA also promotes specific changes in the expression of thermostable and unstable elongation factors Tuf/Ts involved in the interaction of the bacterium with the host proteins. Taken together, these results suggest that GABA is a physiological regulator of P. aeruginosa virulence.

Quantification of Pseudomonas aeruginosa hydrogen cyanide production by a polarographic approach.

Pseudomonas aeruginosa is an opportunistic pathogen responsible for numerous infections acquired in hospital especially in persons whose immune systems are weakened, such as with patient suffering from AIDS or cystic fibrosis. This bacterium produces a great diversity of virulence factors among them hydrogen cyanide (HCN) which is one of the most potent and toxic. A precise quantification of HCN or CN(-) ion is essential to understand the involvement of this toxin in the pathogenesis of P. aeruginosa. In the present study, we present a new technique based on a polarographic approach to measure the production kinetics of HCN/CN(-) by P. aeruginosa strains, in several media commonly used in microbiology labs. The method was validated using mutants (hcnB- and hcnC-) which are unable to produce detectable HCN/CN(-). The kinetics of HCN/CN(-) production by P. aeruginosa in Luria Bertani (LB) medium showed a parabolic shape with a peak observed at 4, 5 and 8h for strains PA14, PAO1 and MPAO1, respectively. When bacteria were grown in ordinary nutrient broth (ONB) 2.5% medium, a less adapted medium for bacterial growth, the general profile of the kinetics was conserved but peak production was delayed (10 and 12h for PAO1 and MPAO1, respectively). When the bacteria were cultured in minimum medium MMC, bacterial growth was particularly slow and HCN/CN(-) production was markedly reduced. Taken together, this new polarographic method appears as a useful technique to detect and quantify HCN/CN(-) in routine media where the bacteria can express and regulate high amounts of toxins. With this method, we demonstrate that HCN/CN(-) production by P. aeruginosa is maximal at the end of the exponential growth phase and depends on the richness of the growth medium used.

Novel application of cyclolipopeptide amphisin: feasibility study as additive to remediate polycyclic aromatic hydrocarbon (PAH) contaminated sediments.

To decontaminate dredged harbor sediments by bioremediation or electromigration processes, adding biosurfactants could enhance the bioavailability or mobility of contaminants in an aqueous phase. Pure amphisin from Pseudomonas fluorescens DSS73 displays increased effectiveness in releasing polycyclic aromatic hydrocarbons (PAHs) strongly adsorbed to sediments when compared to a synthetic anionic surfactant. Amphisin production by the bacteria in the natural environment was also considered. DSS73's growth is weakened by three model PAHs above saturation, but amphisin is still produced. Estuarine water feeding the dredged material disposal site of a Norman harbor (France) allows both P. fluorescens DSS73 growth and amphisin production.

C-type natriuretic peptide modulates quorum sensing molecule and toxin production in Pseudomonas aeruginosa.

Pseudomonas aeruginosa coordinates its virulence expression and establishment in the host in response to modification of its environment. During the infectious process, bacteria are exposed to and can detect eukaryotic products including hormones. It has been shown that P. aeruginosa is sensitive to natriuretic peptides, a family of eukaryotic hormones, through a cyclic nucleotide-dependent sensor system that modulates its cytotoxicity. We observed that pre-treatment of P. aeruginosa PAO1 with C-type natriuretic peptide (CNP) increases the capacity of the bacteria to kill Caenorhabditis elegans through diffusive toxin production. In contrast, brain natriuretic peptide (BNP) did not affect the capacity of the bacteria to kill C. elegans. The bacterial production of hydrogen cyanide (HCN) was enhanced by both BNP and CNP whereas the production of phenazine pyocyanin was strongly inhibited by CNP. The amount of 2-heptyl-4-quinolone (HHQ), a precursor to 2-heptyl-3-hydroxyl-4-quinolone (Pseudomonas quinolone signal; PQS), decreased after CNP treatment. The quantity of 2-nonyl-4-quinolone (HNQ), another quinolone which is synthesized from HHQ, was also reduced after CNP treatment. Conversely, both BNP and CNP significantly enhanced bacterial production of acylhomoserine lactone (AHL) [e.g. 3-oxo-dodecanoyl-homoserine lactone (3OC12-HSL) and butanoylhomoserine lactone (C4-HSL)]. These results correlate with an induction of lasI transcription 1 h after bacterial exposure to BNP or CNP. Concurrently, pre-treatment of P. aeruginosa PAO1 with either BNP or CNP enhanced PAO1 exotoxin A production, via a higher toxA mRNA level. At the same time, CNP led to elevated amounts of algC mRNA, indicating that algC is involved in C. elegans killing. Finally, we observed that in PAO1, Vfr protein is essential to the pro-virulent effect of CNP whereas the regulator PtxR supports only a part of the CNP pro-virulent activity. Taken together, these data reinforce the hypothesis that during infection natriuretic peptides, particularly CNP, could enhance the virulence of PAO1. This activity is relayed by Vfr and PtxR activation, and a general diagram of the virulence activation cascade involving AHL, HCN and exotoxin A is proposed.

Intermolecular interactions in self-assembled monolayers of tetrathiafulvalene derivatives.

The elaboration of mixed self-assembled monolayers (SAMs) of tetrathiafulvalene derivatives allows the modulation of intermolecular interactions and provides evidence of segregated distribution of redox centers.

Positive homotropic allosteric receptors for neutral guests: annulated tetrathiafulvalene-calix[4]pyrroles as colorimetric chemosensors for nitroaromatic explosives.

The study of positive homotropic allosterism in supramolecular receptors is important for elucidating design strategies that can lead to increased sensitivity in various molecular recognition applications. In this work, the cooperative relationship between tetrathiafulvalene (TTF)-calix[4]pyrroles and several nitroaromatic guests is examined. The design and synthesis of new annulated TTF-calix[4]pyrrole receptors with the goal of rigidifying the system to accommodate better nitroaromatic guests is outlined. These new derivatives, which display significant improvement in terms of binding constants, also display a positive homotropic allosteric relationship, as borne out from the sigmoidal nature of the binding isotherms and analysis by using the Hill equation, Adair equation, and Scatchard plots. The host-guest complexes themselves have been characterized by single-crystal X-ray diffraction analyses and studied by means of UV-spectroscopic titrations. Investigations into the electronic nature of the receptors were made by using cyclic voltammetry; this revealed that the binding efficiency was not strictly related to the redox potential of the receptor. On the other hand, this work serves to illustrate how cooperative effects may be used to enhance the recognition ability of TTF-calix[4]pyrrole receptors. It has led to new allosteric systems that function as rudimentary colorimetric chemosensors for common nitroaromatic-based explosives, and which are effective even in the presence of potentially interfering anions.

An original redox-responsive ligand based on a pi-extended TTF framework.

The synthesis of the first pi-extended tetrathiafulvalene (TTF) ligand featuring a furanoquinonoid spacer and pyridyl functional groups is described. This compound shows an unprecedented electrochemical sensing behavior and excellent coordinating properties toward selected divalent metal ions. Solid-state structures of the free ligand and its Ni(II)Cl2 complex are described.

Monitoring the formation of TTF dimers by Na+ complexation.

The formation of the two dimeric species [(TTF)2]+* and (TTF+*)2 can be monitored by complexation of Na+ on a calix[4]arene-TTF assembly.

Bis(calixcrown)tetrathiafulvalene receptors.

A new class of electroactive receptors has been synthesized, built by covalent association of five subunits: two calixarene platforms for spatial organization, two polyether 3D cavities for cation binding, and one electroactive TTF unit to probe the complexation event. Sodium complexation induces rigidification of the molecular assembly, as shown by 1H NMR titration and single-crystal X-ray crystallographic studies on free receptor 14 and a corresponding complex with two bound sodium atoms per receptor (15-(NaPF6)2). The calixarene units in these receptors change from a pinched cone conformation in the free ligand to a symmetrical cone in the complex. Cyclovoltammetric studies validated the electrochemical recognition concept of these five-member assemblies.

Bis-calix[4]arenes bridged by an electroactive tetrathiafulvalene unit.

Syntheses of the first bis-calixarenes systems bridged by a tetrathiafulvalene (TTF) framework 5a,b have been carried out in good yields through triethyl phosphite-mediated dechalcogenation-dimerizations of the corresponding 1,3-dithiole-2-(thi)ones 3 or 4. X-ray structures of the calix[4]arene-TTF-calix[4]arene assembly 5b and of the calix[4]arene-thione intermediate 3b are analyzed and confirm the cone conformations adopted by the calix[4]arene parts, as it is also observed by (1)H NMR analysis of these systems. The solid-state organization in 5b leads to alternate layers of calixarene and TTF units. The cyclic voltammograms of 5a,b show as expected a two-step redox behavior but display a CV deformation for the second redox process.