A Recipe for a Great Meal: A Benchtop Route from Elemental Se to Superior Thermoelectric ß-Ag2Se.

The low-temperature modification of ß-Ag2Se has proven to be useful as a near-room-temperature thermoelectric material. Over the past years, research has been devoted to interstitial, vacancy, and substitutional doping into the parent ß-Ag2Se structure, aiming at tuning the material's charge and heat transport properties to enhance thermoelectric performance. The transformation of ß-Ag2Se into α-Ag2Se at ∼134 °C and the low solubility of dopants are the main obstacles for the doping approach. Herein, we report a facile, safe, scalable, and cost-effective benchtop approach to successfully produce metal-doped ß-Ag2Se. The doped materials display a remarkable enhancement of thermoelectric performance with a record-high peak zT of 1.30 at 120 °C and an average zT of ∼1.15 in the 25-120 °C range for 0.2 at. % Zn-doped Ag2Se. The enhancement in zT is attributed to point defects created by Zn doping into Ag vacancies/interstitials, which enhances the scattering of phonons and tunes the charge carrier properties, leading to the significant suppression of thermal conductivity. The simplicity of the synthetic method developed herein and the high performance of the final products provide an avenue to produce high-quality Ag2Se-based thermoelectric materials.

Metal Substitutions (M = Al, Ga, In; Sn, Ge; and Mn, Fe, Co) in ZnS: Sphalerite versus Wurtzite Formation.

A series of Zn1-xMxS polycrystalline samples were synthesized via a solid-state reaction in closed vessels to examine the solubility of foreign M cations within the wurtzite ZnS structure, employing quenching or slow cooling processes to favor specific polymorphs. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses revealed diverse structural behaviors across different cations. Group 13 elements (Al and Ga) formed solid solutions with a wurtzite structure, while In showed complex layer stacking defects. For 3d magnetic cations (Mn, Fe, and Co), a broad solubility range in the hexagonal structure was noted for Mn, whereas Fe and Co more readily formed cubic structures, with solubilities similar to Mn in the sphalerite form. Despite structural differences, magnetic susceptibilities and spin freezing temperatures for Fe and Co were comparable. Group 14 elements showed varied behaviors: Sn was insoluble in ZnS, as attested by unchanged unit cell parameters and surface crystallite Sn, whereas Ge only formed in the cubic phase with a solubility limit of x ≈ 0.2. The study discusses these variations in solubility and structure in terms of oxidation states, ionic-covalent radius, and coordination preferences in sulfides.

Make Selenium Reactive Again: Activating Elemental Selenium for Synthesis of Metal Selenides Ranging from Nanocrystals to Large Single Crystals.

The inertness of elemental selenium is a significant obstacle in the synthesis of selenium-containing materials at low reaction temperatures. Over the years, several recipes have been developed to overcome this hurdle; however, most of the methods are associated with the use of highly toxic, expensive, and environmentally harmful reagents. As such, there is an increasing demand for the design of cheap, stable, and nontoxic reactive selenium precursors usable in the low-temperature synthesis of transition metal selenides with vast applications in nanotechnology, thermoelectrics, and superconductors. Herein, a novel synthetic route has been developed for activating elemental selenium by using a solvothermal approach. By comprehensive 77Se NMR, Raman, and infrared spectroscopies and gas chromatography-mass spectrometry, we show that the activated Se solution contained HSe-, [Se-Se]2-, and Se2- ions, as well as dialkyl selenide (R2Se) and dialkyl diselenide (R-Se-Se-R) species in dynamic equilibrium. This also corresponded to the first observation of naked Se22- in solution. The versatility of the developed Se precursor was demonstrated by the successful synthesis of (i) the polycrystalline room-temperature modification of the ß-Ag2Se thermoelectric material; (ii) large single crystals of superconducting ß-FeSe; (iii) CdSe nanocrystals with different particle sizes (3-10 nm); (iv) nanosheets of PtSe2; and (v) mono- and dibenzyl selenides and diselenides at room temperature. The simplicity and diversity of the developed Se activation method holds promise for applied and fundamental research.

Controllable Anchoring of Graphitic Carbon Nitride on MnO2 Nanoarchitectures for Oxygen Evolution Electrocatalysis.

The design and fabrication of eco-friendly and cost-effective (photo)electrocatalysts for the oxygen evolution reaction (OER) is a key research goal for a proper management of water splitting to address the global energy crisis. In this work, we focus on the preparation of supported MnO2/graphitic carbon nitride (g-CN) OER (photo)electrocatalysts by means of a novel preparation strategy. The proposed route consists of the plasma enhanced-chemical vapor deposition (PE-CVD) of MnO2 nanoarchitectures on porous Ni scaffolds, the anchoring of controllable g-CN amounts by an amenable electrophoretic deposition (EPD) process, and the ultimate thermal treatment in air. The inherent method versatility and flexibility afforded defective MnO2/g-CN nanoarchitectures, featuring a g-CN content and nano-organization tunable as a function of EPD duration and the used carbon nitride precursor. Such a modulation had a direct influence on OER functional performances, which, for the best composite system, corresponded to an overpotential of 430 mV at 10 mA/cm2, a Tafel slope of ≈70 mV/dec, and a turnover frequency of 6.52 × 10-3 s-1, accompanied by a very good time stability. The present outcomes, comparing favorably with previous results on analogous systems, were rationalized on the basis of the formation of type-II MnO2/g-CN heterojunctions, and yield valuable insights into this class of green (photo)electrocatalysts for end uses in solar-to-fuel conversion and water treatment.

Towards All-Non-Vacuum-Processed Photovoltaic Systems: A Water-Based Screen-Printed Cu(In,Ga)Se2 Photoabsorber with a 6.6% Efficiency.

During the last few decades, major advances have been made in photovoltaic systems based on Cu(In,Ga)Se2 chalcopyrite. However, the most efficient photovoltaic cells are processed under high-energy-demanding vacuum conditions. To lower the costs and facilitate high-throughput production, printing/coating processes are proving to be effective solutions. This work combined printing, coating, and chemical bath deposition processes of photoabsorber, buffer, and transparent conductive layers for the development of solution-processed photovoltaic systems. Using a sustainable approach, all inks were formulated using water and ethanol as solvents. Screen printing of the photoabsorber on fluorine-doped tin-oxide-coated glass followed by selenization, chemical bath deposition of the cadmium sulfide buffer, and final sputtering of the intrinsic zinc oxide and aluminum-doped zinc oxide top conductive layers delivered a 6.6% maximum efficiency solar cell, a record for screen-printed Cu(In,Ga)Se2 solar cells. On the other hand, the all-non-vacuum-processed device with spray-coated intrinsic zinc-oxide- and tin-doped indium oxide top conductive layers delivered a 2.2% efficiency. The given approaches represent relevant steps towards the fabrication of sustainable and efficient Cu(In,Ga)Se2 solar cells.

Correction: 5D total scattering computed tomography reveals the full reaction mechanism of a bismuth vanadate lithium ion battery anode.

Correction for '5D total scattering computed tomography reveals the full reaction mechanism of a bismuth vanadate lithium ion battery anode' by Jonas Sottmann et al., Phys. Chem. Chem. Phys., 2022, 24, 27075-27085, https://doi.org/10.1039/D2CP03892G.

Large-Scale Colloidal Synthesis of Chalcogenides for Thermoelectric Applications.

A simple and effective preparation of solution-processed chalcogenide thermoelectric materials is described. First, PbTe, PbSe, and SnSe were prepared by gram-scale colloidal synthesis relying on the reaction between metal acetates and diphenyl dichalcogenides in hexadecylamine solvent. The resultant phase-pure chalcogenides consist of highly crystalline and defect-free particles with distinct cubic-, tetrapod-, and rod-like morphologies. The powdered PbTe, PbSe, and SnSe products were subjected to densification by spark plasma sintering (SPS), affording dense pellets of the respective chalcogenides. Scanning electron microscopy shows that the SPS-derived pellets exhibit fine nano-/micro-structures dictated by the original morphology of the key constituting particles, while the powder X-ray diffraction and electron microscopy analyses confirm that the SPS-derived pellets are phase-pure materials, preserving the structure of the colloidal synthesis products. The resultant solution-processed PbTe, PbSe, and SnSe exhibit low thermal conductivity, which might be due to the enhanced phonon scattering developed over fine microstructures. For undoped n-type PbTe and p-type SnSe samples, an expected moderate thermoelectric performance is achieved. In contrast, an outstanding figure-of-merit of 0.73 at 673 K was achieved for undoped n-type PbSe outperforming, the majority of the optimized PbSe-based thermoelectric materials. Overall, our findings facilitate the design of efficient solution-processed chalcogenide thermoelectrics.

High Seebeck Coefficient from Screen-Printed Colloidal PbSe Nanocrystals Thin Film.

Thin-film thermoelectrics (TEs) with a thickness of a few microns present an attractive opportunity to power the internet of things (IoT). Here, we propose screen printing as an industry-relevant technology to fabricate TE thin films from colloidal PbSe quantum dots (QDs). Monodisperse 13 nm-sized PbSe QDs with spherical morphology were synthesized through a straightforward heating-up method. The cubic-phase PbSe QDs with homogeneous chemical composition allowed the formulation of a novel ink to fabricate 2 µm-thick thin films through robust screen printing followed by rapid annealing. A maximum Seebeck coefficient of 561 µV K-1 was obtained at 143 °C and the highest electrical conductivity of 123 S m-1 was reached at 197 °C. Power factor calculations resulted in a maximum value of 2.47 × 10-5 W m-1 K-2 at 143 °C. To the best of our knowledge, the observed Seebeck coefficient value is the highest reported for TE thin films fabricated by screen printing. Thus, this study highlights that increased Seebeck coefficients can be obtained by using QD building blocks owing to quantum confinement.

5D total scattering computed tomography reveals the full reaction mechanism of a bismuth vanadate lithium ion battery anode.

We have used operando 5D synchrotron total scattering computed tomography (TSCT) to understand the cycling and possible long term deactivation mechanisms of the lithium-ion battery anode bismuth vanadate. This anode material functions via a combined conversion/alloying mechanism in which nanocrystals of lithium-bismuth alloy are protected by an amorphous matrix of lithium vanadate. This composite is formed in situ during the first lithiation of the anode. The operando TSCT data were analyzed and mapped using both pair distribution function and Rietveld methods. We can follow the lithium-bismuth alloying reaction at all stages, gaining real structural insight including variations in nanoparticle sizes, lattice parameters and bond lengths, even when the material is completely amorphous. We also observe for the first time structural changes related to the cycling of lithium ions in the lithium vanadate matrix, which displays no interactions beyond the first shell of V-O bonds. The first 3D operando mapping of the distribution of different materials in an amorphous anode reveals a decline in coverage caused by either agglomeration or partial dissolution of the active material, hinting at the mechanism of long term deactivation. The observations from the operando experiment are backed up by post mortem transmission electron microscope (TEM) studies and theoretical calculations to provide a complete picture of an exceptionally complex cycling mechanism across a range of length scales.

Selective Photocatalytic Dehydrogenation of Formic Acid by an In Situ-Restructured Copper-Postmetalated Metal-Organic Framework under Visible Light.

Formic acid is considered as one of the most promising liquid organic hydrogen carriers. Its catalytic dehydrogenation process generally suffers from low activity, low reaction selectivity, low stability of the catalysts, and/or the use of noble-metal-based catalysts. Herein we report a highly selective, efficient, and noble-metal-free photocatalyst for the dehydrogenation of formic acid. This catalyst, UiO-66(COOH)2-Cu, is built by postmetalation of a carboxylic-functionalized Zr-MOF with copper. The visible-light-driven photocatalytic dehydrogenation process through the release of hydrogen and carbon dioxide has been monitored in real-time via operando Fourier transform infrared spectroscopy, which revealed almost 100% selectivity with high stability (over 3 days) and a conversion yield exceeding 60% (around 5 mmol·gcat-1·h-1) under ambient conditions. These performance indicators make UiO-66(COOH)2-Cu among the top photocatalysts for formic acid dehydrogenation. Interestingly, the as-prepared UiO-66(COOH)2-Cu hetero-nanostructure was found to be moderately active under solar irradiation during an induction phase, whereupon it undergoes an in-situ restructuring process through intraframework cross-linking with the formation of the anhydride analogue structure UiO-66(COO)2-Cu and nanoclustering of highly active and stable copper sites, as evidenced by the operando studies coupled with steady-state isotopic transient kinetic experiments, transmission electron microscopy and X-ray photoelectron spectroscopy analyses, and Density Functional Theory calculations. Beyond revealing outstanding catalytic performance for UiO-66(COO)2-Cu, this work delivers an in-depth understanding of the photocatalytic reaction mechanism, which involves evolutive behavior of the postmetalated copper as well as the MOF framework over the reaction. These key findings pave the way toward the engineering of new and efficient catalysts for photocatalytic dehydrogenation of formic acid.

Path Less Traveled: A Contemporary Twist on Synthesis and Traditional Structure Solution of Metastable LiNi12B8.

Achieving kinetic control to synthesize metastable compounds is a challenging task, especially in solid-state reactions where the diffusion is slow. Another challenge is the unambiguous crystal structure determination for metastable compounds when high-quality single crystals suitable for single-crystal X-ray diffraction are inaccessible. In this work, we report an unconventional means of synthesis and an effective strategy to solve the crystal structure of an unprecedented metastable compound LiNi12B8. This compound can only be produced upon heating a metastable layered boride, HT-Li0.4NiB (HT: high temperature), in a sealed niobium container. A conventional heating and annealing of elements do not yield the title compound, which is consistent with the metastable nature of LiNi12B8. The process to crystallize this compound is sensitive to the annealing temperature and dwelling time, a testament to the complex kinetics involved in the formation of the product. The unavailability of crystals suitable for single-crystal X-ray diffraction experiments prompted solving the crystal structure from high-resolution synchrotron powder X-ray diffraction data. This compound crystallizes in a new structure type with space group I4/mmm (a = 10.55673(9) Å, c = 10.00982(8) Å, V = 1115.54(3) Å3, Z = 6). The resulting complex crystal structure of LiNi12B8 is confirmed by scanning transmission electron microscopy and solid-state 11B and 7Li NMR spectroscopy analyses. The extended Ni framework with Li/Ni disorder in its crystal structure resulted in the spin-glass or cluster glass type magnetic ordering below 24 K. This report illustrates a "contemporary twist" to traditional methodologies toward synthesizing a metastable compound and provides a recipe for solving structures by combining the complementary characterization techniques in the cases where the traditionally used single-crystal X-ray diffraction method is nonapplicable.

Deep Eutectic Solvent Synthesis of Perovskite Electrocatalysts for Water Oxidation.

Oxide perovskites have attracted great interest as materials for energy conversion due to their stability and structural tunability. La-based perovskites of 3d-transition metals have demonstrated excellent activities as electrocatalysts in water oxidation. Herein, we report the synthesis route to La-based perovskites using an environmentally friendly deep eutectic solvent (DES) consisting of choline chloride and malonic acid. The DES route affords phase-pure crystalline materials on a gram scale and results in perovskites with high electrocatalytic activity for oxygen evolution reaction. A convenient, fast, and scalable synthesis proceeds via assisted metathesis at a lower temperature as compared to traditional solid-state methods. Among LaCoO3, LaMn0.5Ni0.5O3, and LaMnO3 perovskites prepared via the DES route, LaCoO3 was established to be the best-performing electrocatalyst for water oxidation in alkaline medium at 0.25 mg cm-2 mass loading. LaCoO3 exhibits current densities of 10, 50, and 100 mA cm-2 at respective overpotentials of approximately 390, 430, and 470 mV, respectively, and features a Tafel slope of 55.8 mV dec-1. The high activity of LaCoO3 as compared to the other prepared perovskites is attributed to the high concentration of oxygen vacancies in the LaCoO3 lattice, as observed by high-resolution transmission electron microscopy. An intrinsically high concentration of O vacancies in the LaCoO3 synthesized via the DES route is ascribed to the reducing atmosphere attained upon thermal decomposition of the DES components. These findings will contribute to the preparation of highly active perovskites for various energy applications.

Microwave-Assisted Solution Synthesis of Metastable Intergrowth of AgInS2 Polymorphs.

The intergrowth of stable and metastable AgInS2 polymorphs was synthesized using a microwave-assisted synthesis. The samples were synthesized in water and in a deep eutectic solvent (DES) consisting of choline chloride and thiourea. An increase in the metal precursor concentration improved the crystallinity of the synthesized samples and affected the particle size. AgInS2 cannot be synthesized from crystalline binary Ag2S or In2S3 via this route. The solution synthesis reported here results in the intergrowth of the thermodynamically stable polymorph (space group I4¯2d, chalcopyrite structure) and the high-temperature polymorph (space group Pna21, wurtzite-like structure) that is metastable at room temperature. A scanning transmission microscopy (STEM) study revealed the intergrowth of tetragonal and orthorhombic polymorphs in a single particle and unambiguously established that the long-thought hexagonal wurtzite polymorph has pseudo-hexagonal symmetry and is best described with the orthorhombic unit cell. The solution-synthesized AgInS2 polymorphs intergrowth has slightly lower bandgap values in the range of 1.73 eV-1.91 eV compared to the previously reported values for tetragonal I4¯2d (1.86 eV) and orthorhombic Pna21 (1.98 eV) polymorphs.

First demonstration of tuning between the Kitaev and Ising limits in a honeycomb lattice.

Recent observations of novel spin-orbit coupled states have generated interest in 4d/5d transition metal systems. A prime example is the [Formula: see text] state in iridate materials and α-RuCl3 that drives Kitaev interactions. Here, by tuning the competition between spin-orbit interaction (λSOC) and trigonal crystal field (ΔT), we restructure the spin-orbital wave functions into a previously unobserved [Formula: see text] state that drives Ising interactions. This is done via a topochemical reaction that converts Li2RhO3 to Ag3LiRh2O6. Using perturbation theory, we present an explicit expression for the [Formula: see text] state in the limit ΔT ≫ λSOC realized in Ag3LiRh2O6, different from the conventional [Formula: see text] state in the limit λSOC ≫ ΔT realized in Li2RhO3. The change of ground state is followed by a marked change of magnetism from a 6 K spin-glass in Li2RhO3 to a 94 K antiferromagnet in Ag3LiRh2O6.

Fano-type Effect in Hydrogen-Terminated Pure Nanodiamond.

Two novel properties, unique for semiconductors, a negative electron affinity and a high p-type surface electrical conductivity, were discovered in diamond at the end of the last century. Both properties appear when the diamond surface is hydrogenated. A natural question arises: is the influence of the surface hydrogen on diamond limited only to the electrical properties? Here, for the first time to our knowledge, we observe a transparency peak at 1328 cm-1 in the infrared absorption of hydrogen-terminated pure (undoped) nanodiamonds. This new optical property is ascribed to Fano-type destructive interference between zone-center optical phonons and free carriers (holes) appearing in the near-surface layer of hydrogenated nanodiamond. This work opens the way to explore the physics of electron-phonon coupling in undoped semiconductors and promises the application of H-terminated nanodiamonds as a new optical material with induced transparency in the infrared optical range.

Polar Layered Intermetallic LaCo2P2 as a Water Oxidation Electrocatalyst.

We investigate LaCo2P2 as an electrocatalytic material for oxygen evolution reaction (OER) under alkaline and acidic conditions. This layered intermetallic material was prepared via Sn-flux high-temperature annealing. The electrocatalytic ink, prepared with the ball-milled LaCo2P2 catalyst at the mass loading of 0.25 mg/cm2, shows OER activity at pH = 14, reaching current densities of 10, 50, and 100 mA/cm2 under the overpotential of 400, 440, and 460 mV, respectively. Remarkably, the electrocatalytic performance remains constant for at least 4 days. Transmission electron microscopy reveals the formation of a catalytically active CoOx shell around the pre-catalyst LaCo2P2 core during the alkaline OER. The core serves as a robust support for the in situ-formed electrocatalytic system. Similar studies under pH = 0 reveal the rapid deterioration of LaCo2P2, with the formation of LaPO4 and amorphous cobalt oxide. This study shows the viability of layered intermetallics as stable OER electrocatalysts, although further developments are required to improve the electrocatalytic performance and increase the stability at lower pH values.

3D LiMn2 O4 Thin Film Deposited by ALD: A Road toward High-Capacity Electrode for 3D Li-Ion Microbatteries.

Miniaturized electronics suffer from a lack of energy autonomy. In that context, the fabrication of lithium-ion solid-state microbatteries with high performance is mandatory for powering the next generation of portable electronic devices. Here, the fabrication of a thin film positive electrode for 3D Li-ion microbatteries made by the atomic layer deposition (ALD) method and in situ lithiation step is demonstrated. The 3D electrodes based on spinel LiMn2 O4 films operate at high working potential (4.1 V vs Li/Li+ ) and are capable of delivering a remarkable surface capacity (≈180 µAh cm-2 ) at low C-rate while maintaining more than 40 µAh cm-2 at C/2 (time constant = 2 h). Both the thickness of the electrode material and the 3D gain of the template are carefully tuned to maximize the electrode performance. Advanced characterization techniques such as transmission electron and X-ray transmission microscopies are proposed as perfect tools to study the conformality of the deposited films and the interfaces between each layer: no interdiffusion or segregation are observed. This work represents a major issue towards the fabrication of 3D-lithiated electrode by ALD-without any prelithiation step by electrochemical technique-making it an attractive solution for the fabrication of 3D Li-ion solid-state microbatteries with semiconductor processing methods.

Unprecedented superstructure in the type I family of clathrates.

The first arsenic-based clathrate exhibiting superstructural ordering due to optimization of Au-As, As-As, and Ba-Au bonding is reported. Ba8Au16As30 crystallizes in a unique P21/c monoclinic clathrate structure. The synthesis, crystal and electronic structure, and transport properties are discussed.

Local-Disorder-Induced Low Thermal Conductivity in Degenerate Semiconductor Cu22Sn10S32.

S-based semiconductors are attracting attention as environmentally friendly materials for energy-conversion applications because of their structural complexity and chemical flexibility. Here, we show that the delicate interplay between the chemical composition and cationic order/disorder allows one to stabilize a new sphalerite derivative phase of cubic symmetry in the Cu-Sn-S diagram: Cu22Sn10S32. Interestingly, its crystal structure is characterized by a semiordered cationic distribution, with the Cu-Sn disorder being localized on one crystallographic site in a long-range-ordered matrix. The origin of the partial disorder and its influence on the electronic and thermal transport properties are addressed in detail using a combination of synchrotron X-ray diffraction, Mössbauer spectroscopy, transmission electron microscopy, theoretical modeling, and transport property measurements. These measurements evidence that this compound behaves as a pseudogap, degenerate p-type material with very low lattice thermal conductivity (0.5 W m-1 K-1 at 700 K). We show that localized disorder is very effective in lowering κL without compromising the integrity of the conductive framework. Substituting pentavalent Sb for tetravalent Sn is exploited to lower the hole concentration and doubles the thermoelectric figure of merit ZT to 0.55 at 700 K with respect to the pristine compound. The discovery of this semiordered cubic sphalerite derivative Cu22Sn10S32 furthers the understanding of the structure-property relationships in the Cu-Sn-S system and more generally in ternary and quaternary Cu-based systems.

Tailored Co3O4-Based Nanosystems: Toward Photocatalysts for Air Purification.

The adverse effects of NOx (NO + NO2) gases on the environment and human health have triggered the development of sustainable photocatalysts for their efficient removal (De-NOx). In this regard, the present work focuses on supported Co3O4-based nanomaterials fabricated via chemical vapor deposition (CVD), assessed for the first time as photocatalysts for sunlight-activated NO oxidation. A proof-of-principle investigation on the possibility of tailoring material performances by heterostructure formation is explored through deposition of SnO2 or Fe2O3 onto Co3O4 by radio frequency (RF) sputtering. A comprehensive characterization by complementary analytical tools evidences the formation of high-purity columnar Co3O4 arrays with faceted pyramidal tips, conformally covered by very thin SnO2 and Fe2O3 overlayers. Photocatalytic functional tests highlight an appreciable activity for bare Co3O4 systems, accompanied by a high selectivity in NOx conversion to harmless nitrate species. A preliminary evaluation of De-NOx performances for functionalized systems revealed a direct dependence of the system behavior on the chemical composition, SnO2/Fe2O3 overlayer morphology, and charge transfer events between the single oxide constituents. Taken together, the present results can provide valuable guidelines for the eventual implementation of improved photocatalysts for air purification.