Analysis of the conformation and function of the Plasmodium falciparum merozoite proteins MTRAP and PTRAMP.

Thrombospondin repeat (TSR)-like domains are structures involved with cell adhesion. Plasmodium falciparum proteins containing TSR domains play crucial roles in parasite development. In particular, the preerythrocytic P. falciparum circumsporozoite protein is involved in hepatocyte invasion. The importance of these domains in two other malaria proteins, the merozoite-specific thrombospondin-related anonymous protein (MTRAP) and the thrombospondin-related apical membrane protein (PTRAMP), were assessed using near-full-length recombinant proteins composed of the extracellular domains produced in Escherichia coli. MTRAP is thought to be released from invasive organelles identified as micronemes during merozoite invasion to mediate motility and host cell invasion through an interaction with aldolase, an actin binding protein involved in the moving junction. PTRAMP function remains unknown. In this study, the conformation of recombinant MTRAP (rMTRAP) appeared to be a highly extended protein (2 nm by 33 nm, width by length, respectively), whereas rPTRAMP had a less extended structure. Using an erythrocyte binding assay, rMTRAP but not rPTRAMP bound human erythrocytes; rMTRAP binding was mediated through the TSR domain. MTRAP- and in general PTRAMP-specific antibodies failed to inhibit P. falciparum development in vitro. Altogether, MTRAP is a highly extended bifunctional protein that binds to an erythrocyte receptor and the merozoite motor.

Structure of the Plasmodium falciparum circumsporozoite protein, a leading malaria vaccine candidate.

The Plasmodium falciparum circumsporozoite protein (CSP) is critical for sporozoite function and invasion of hepatocytes. Given its critical nature, a phase III human CSP malaria vaccine trial is ongoing. The CSP is composed of three regions as follows: an N terminus that binds heparin sulfate proteoglycans, a four amino acid repeat region (NANP), and a C terminus that contains a thrombospondin-like type I repeat (TSR) domain. Despite the importance of CSP, little is known about its structure. Therefore, recombinant forms of CSP were produced by expression in both Escherichia coli (Ec) and then refolded (EcCSP) or in the methylotrophic yeast Pichia pastoris (PpCSP) for structural analyses. To analyze the TSR domain of recombinant CSP, conformation-dependent monoclonal antibodies that recognized unfixed P. falciparum sporozoites and inhibited sporozoite invasion of HepG2 cells in vitro were identified. These monoclonal antibodies recognized all recombinant CSPs, indicating the recombinant CSPs contain a properly folded TSR domain structure. Characterization of both EcCSP and PpCSP by dynamic light scattering and velocity sedimentation demonstrated that both forms of CSP appeared as highly extended proteins (R(h) 4.2 and 4.58 nm, respectively). Furthermore, high resolution atomic force microscopy revealed flexible, rod-like structures with a ribbon-like appearance. Using this information, we modeled the NANP repeat and TSR domain of CSP. Consistent with the biochemical and biophysical results, the repeat region formed a rod-like structure about 21-25 nm in length and 1.5 nm in width. Thus native CSP appears as a glycosylphosphatidylinositol-anchored, flexible rod-like protein on the sporozoite surface.

Characterization of a protective Escherichia coli-expressed Plasmodium falciparum merozoite surface protein 3 indicates a non-linear, multi-domain structure.

Immunization with a recombinant yeast-expressed Plasmodium falciparum merozoite surface protein 3 (MSP3) protected Aotus nancymai monkeys against a virulent challenge infection. Unfortunately, the production process for this yeast-expressed material was not optimal for human trials. In an effort to produce a recombinant MSP3 protein in a scaleable manner, we expressed and purified near-full-length MSP3 in Escherichia coli (EcMSP3). Purified EcMSP3 formed non-globular dimers as determined by analytical size-exclusion HPLC with in-line multi-angle light scatter and quasi-elastic light scatter detection and velocity sedimentation (R(h) 7.6+/-0.2nm and 6.9nm, respectively). Evaluation by high-resolution atomic force microscopy revealed non-linear asymmetric structures, with beaded domains and flexible loops that were recognized predominantly as dimers, although monomers and larger multimers were observed. The beaded substructure corresponds to predicted structural domains, which explains the velocity sedimentation results and improves the conceptual model of the protein. Vaccination with EcMSP3 in Freund's adjuvant-induced antibodies that recognized native MSP3 in parasitized erythrocytes by an immunofluorescence assay and gave delayed time to treatment in a group of Aotus monkeys in a virulent challenge infection with the FVO strain of P. falciparum. Three of the seven monkeys vaccinated with EcMSP3 had low peak parasitemias. EcMSP3, which likely mimics the native MSP3 structure located on the merozoite surface, is a viable candidate for inclusion in a multi-component malaria vaccine.

Interactions between HIV-1 Gag molecules in solution: an inositol phosphate-mediated switch.

Retrovirus particle assembly is mediated by the Gag protein. Gag is a multi-domain protein containing discrete domains connected by flexible linkers. When recombinant HIV-1 Gag protein (lacking myristate at its N terminus and the p6 domain at its C terminus) is mixed with nucleic acid, it assembles into virus-like particles (VLPs) in a fully defined system in vitro. However, this assembly is defective in that the radius of curvature of the VLPs is far smaller than that of authentic immature virions. This defect can be corrected to varying degrees by addition of inositol phosphates to the assembly reaction. We have now explored the binding of inositol hexakisphosphate (IP6) to Gag and its effects upon the interactions between Gag protein molecules in solution. Our data indicate that basic regions at both ends of the protein contribute to IP6 binding. Gag is in monomer-dimer equilibrium in solution, and mutation of the previously described dimer interface within its capsid domain drastically reduces Gag dimerization. In contrast, when IP6 is added, Gag is in monomer-trimer rather than monomer-dimer equilibrium. The Gag protein with a mutation at the dimer interface also remains almost exclusively monomeric in IP6; thus the "dimer interface" is essential for the trimeric interaction in IP6. We discuss possible explanations for these results, including a change in conformation within the capsid domain induced by the binding of IP6 to other domains within the protein. The participation of both ends of Gag in IP6 interaction suggests that Gag is folded over in solution, with its ends near each other in three-dimensional space; direct support for this conclusion is provided in a companion manuscript. As Gag is an extended rod in immature virions, this apparent proximity of the ends in solution implies that it undergoes a major conformational change during particle assembly.

Conformation of the HIV-1 Gag protein in solution.

A single multi-domain viral protein, termed Gag, is sufficient for assembly of retrovirus-like particles in mammalian cells. We have purified the human immunodeficiency virus type 1 (HIV-1) Gag protein (lacking myristate at its N terminus and the p6 domain at its C terminus) from bacteria. This protein is capable of assembly into virus-like particles in a defined in vitro system. We have reported that it is in monomer-dimer equilibrium in solution, and have described a mutant Gag protein that remains monomeric at high concentrations in solution. We report that the mutant protein retains several properties of wild-type Gag. This mutant enabled us to analyze solutions of monomeric protein. Hydrodynamic studies on the mutant protein showed that it is highly asymmetric, with a frictional ratio of 1.66. Small-angle neutron scattering (SANS) experiments confirmed its asymmetry and yielded an R(g) value of 34 A. Atomic-level structures of individual domains within Gag have previously been determined, but these domains are connected in Gag by flexible linkers. We constructed a series of models of the mutant Gag protein based on these domain structures, and tested each model computationally for its agreement with the experimental hydrodynamic and SANS data. The only models consistent with the data were those in which Gag was folded over, with its N-terminal matrix domain near its C-terminal nucleocapsid domain in three-dimensional space. Since Gag is a rod-shaped molecule in the assembled immature virion, these findings imply that Gag undergoes a major conformational change upon virus assembly.

Production and characterization of clinical grade Escherichia coli derived Plasmodium falciparum 42 kDa merozoite surface protein 1 (MSP1(42)) in the absence of an affinity tag.

The 42 kDa cleavage product from the carboxyl end of the Plasmodium falciparum merozoite surface protein 1 (MSP1(42)) is an important blood-stage malaria vaccine target. Several recombinant protein expression systems have been used for production of MSP1(42) including yeast (Saccharomyces cerevisiae and Pichia pastoris), Escherichia coli, baculovirus and transgenic animals. To date, all of the reported recombinant proteins include a 6 x His affinity tag to facilitate purification, including three MSP1(42) clinical grade proteins currently in human trials. Under some circumstances, the presence of the 6 x His tag may not be desirable. Therefore, we were interested to produce clinical grade MSP1(42) without a 6 x His affinity tag from E. coli inclusion bodies. We produced a recombinant MSP1(42) with a P. falciparum FUP (Uganda-Palo Alto) phenotype which accounts for a substantial proportion of the MSP1(42) protein observed in African isolates. EcMSP1(42)-FUP was produced in E. coli inclusion bodies by high cell mass induction with IPTG using 5 L and 60 L bioreactors. Isolated inclusion bodies were solubilized in 8M guanidine-HCl and the EcMSP1(42)-FUP protein refolded by rapid dilution. Refolded EcMSP1(42)-FUP was purified using hydrophobic interaction chromatography, anion exchange chromatography, and size exclusion chromatography, and subject to biochemical characterization for integrity, identity, and purity. Endotoxin and host cell protein levels were within acceptable limits for human use. The process was successfully transferred to pilot-scale production in a cGMP environment. A final recovery of 87.8 mg of clinical-grade material per liter of fermentation broth was achieved. The EcMSP1(42)-FUP clinical antigen is available for preclinical evaluation and human studies.

Quaternary structure and cleavage specificity of a poxvirus holliday junction resolvase.

Recently, poxviruses were found to encode a protein with signature motifs present in the RuvC family of Holliday junction (HJ) resolvases, which have a key role in homologous recombination in bacteria. The vaccinia virus homolog A22 specifically cleaved synthetic HJ DNA in vitro and was required for the in vivo resolution of viral DNA concatemers into unit-length genomes with hairpin telomeres. It was of interest to further characterize a poxvirus resolvase in view of the low sequence similarity with RuvC, the absence of virus-encoded RuvA and RuvB to interact with, and the different functions of the viral and bacterial resolvases. Because purified A22 aggregated severely, studies were carried out with maltose-binding protein fused to A22 as well as to RuvC. Using gel filtration, chemical cross-linking, analytical ultracentrifugation, and light scattering, we demonstrated that A22 and RuvC are homodimers in solution. Furthermore, the dimeric form of the resolvase associated with HJ DNA, presumably facilitating the symmetrical cleavage of such structures. Like RuvC, A22 symmetrically cleaved fixed HJ junctions as well as junctions allowing strand mobility. Unlike RuvC and other members of the family, however, the poxvirus enzyme exhibited little cleavage sequence specificity. Structural and enzymatic similarities of poxvirus, bacterial, and fungal mitochondrial HJ resolvases are consistent with their predicted evolutionary relationship based on sequence analysis. The absence of a homologous resolvase in mammalian cells makes these microbial enzymes excellent potential therapeutic targets.

A BAR domain in the N terminus of the Arf GAP ASAP1 affects membrane structure and trafficking of epidermal growth factor receptor.

BACKGROUND: Arf GAPs are multidomain proteins that function in membrane traffic by inactivating the GTP binding protein Arf1. Numerous Arf GAPs contain a BAR domain, a protein structural element that contributes to membrane traffic by either inducing or sensing membrane curvature. We have examined the role of a putative BAR domain in the function of the Arf GAP ASAP1. RESULTS: ASAP1's N terminus, containing the putative BAR domain together with a PH domain, dimerized to form an extended structure that bound to large unilamellar vesicles containing acidic phospholipids, properties that define a BAR domain. A recombinant protein containing the BAR domain of ASAP1, together with the PH and Arf GAP domains, efficiently bent the surface of large unilamellar vesicles, resulting in the formation of tubular structures. This activity was regulated by Arf1*GTP binding to the Arf GAP domain. In vivo, the tubular structures induced by ASAP1 mutants contained epidermal growth factor receptor (EGFR) and Rab11, and ASAP1 colocalized in tubular structures with EGFR during recycling of receptor. Expression of ASAP1 accelerated EGFR trafficking and slowed cell spreading. An ASAP1 mutant lacking the BAR domain had no effect. CONCLUSIONS: The N-terminal BAR domain of ASAP1 mediates membrane bending and is necessary for ASAP1 function. The Arf dependence of the bending activity is consistent with ASAP1 functioning as an Arf effector.

External scaffold of spherical immature poxvirus particles is made of protein trimers, forming a honeycomb lattice.

During morphogenesis, poxviruses undergo a remarkable transition from spherical immature forms to brick-shaped infectious particles lacking helical or icosahedral symmetry. In this study, we show that the transitory honeycomb lattice coating the lipoprotein membrane of immature vaccinia virus particles is formed from trimers of a 62-kD protein encoded by the viral D13L gene. Deep-etch electron microscopy demonstrated that anti-D13 antibodies bound to the external protein coat and that lattice fragments were in affinity-purified D13 preparations. Soluble D13 appeared mostly trimeric by gel electrophoresis and ultracentrifugation, which is consistent with structural requirements for a honeycomb. In the presence or absence of other virion proteins, a mutated D13 with one amino acid substitution formed stacks of membrane-unassociated flat sheets that closely resembled the curved honeycombs of immature virions except for the absence of pentagonal facets. A homologous domain that is present in D13 and capsid proteins of certain other lipid-containing viruses support the idea that the developmental stages of poxviruses reflect their evolution from an icosahedral ancestor.

Physical and immunological characterization of a recombinant secreted form of the membrane protein encoded by the vaccinia virus L1R gene.

We reported that immunization with recombinant proteins derived from vaccinia virus (VV) particles could provide protection against infection. Here we describe the physical and antigenic properties of the L1R membrane protein. The recombinant protein (L1R(185t)) was secreted as a monomer and correct folding was suggested by the presence of three intramolecular disulfide bonds and binding to conformation-specific monoclonal antibodies (MAbs). Furthermore, anti-L1R(185t) rabbit antisera exhibited potent virus-neutralizing activity against the IMV form of VV. We raised six MAbs against L1R(185t). Three recognized linear epitopes (residues 118--128) and neutralized IMV infectivity. These MAbs blocked binding of each other to L1R(185t) but failed to block binding of two previously described neutralizing anti-L1R MAbs, 7D11 and 2D5. The latter two antibodies blocked each other in binding L1R(185t). Thus, two antigenic sites on L1R overlap functional domains and based on recent structural studies these are found in accessible regions of the IMV L1R protein.

Soluble mimetics of human immunodeficiency virus type 1 viral spikes produced by replacement of the native trimerization domain with a heterologous trimerization motif: characterization and ligand binding analysis.

The human immunodeficiency virus type 1 (HIV-1) exterior envelope glycoprotein, gp120, mediates binding to the viral receptors and, along with the transmembrane glycoprotein gp41, is a major target for neutralizing antibodies. We asked whether replacing the gp41 fusion/trimerization domain with a stable trimerization motif might lead to a more stable gp120 trimer that would be amenable to structural and immunologic analysis. To obtain stable gp120 trimers, a heterologous trimerization motif, GCN4, was appended to the C terminus of YU2gp120. Biochemical analysis indicated that the gp120-GCN4 trimers were superior to gp140 molecules in their initial homogeneity, and trilobed structures were observable by electron microscopy. Biophysical analysis of gp120-GCN4 trimers by isothermal titration calorimetry (ITC) and ultracentrifugation analyses indicated that most likely two molecules of soluble CD4 could bind to one gp120-GCN4 trimer. To further examine restricted CD4 stoichiometric binding to the gp120-GCN4 trimers, we generated a low-affinity CD4 binding trimer by introducing a D457V change in the CD4 binding site of each gp120 monomeric subunit. The mutant trimers could definitively bind only one soluble CD4 molecule, as determined by ITC and sedimentation equilibrium centrifugation. These data indicate that there are weak interactions between the gp120 monomeric subunits of the GCN4-stabilized trimers that can be detected by low-affinity ligand sensing. By similar analysis, we also determined that removal of the variable loops V1, V2, and V3 in the context of the gp120-GCN4 proteins allowed the binding of three CD4 molecules per trimer. Interestingly, both the gp120-GCN4 variants displayed a restricted stoichiometry for the CD4-induced antibody 17b of one antibody molecule binding per trimer. This restriction was not evident upon removal of the variable loops V1 and V2 loops, consistent with conformational constraints in the wild-type gp120 trimers and similar to those inherent in the functional Env spike. Thus, the gp120-GCN4 trimers demonstrate several properties that are consistent with some of those anticipated for gp120 in the context of the viral spike.

Metal-catalyzed oxidation of alpha-synuclein: helping to define the relationship between oligomers, protofibrils, and filaments.

Oxidative stress is implicated in a number of neuro-degenerative diseases and is associated with the selective loss of dopaminergic neurons of the substantia nigra in Parkinson's disease. The role of alpha-synuclein as a potential target of intracellular oxidants has been demonstrated by the identification of posttranslational modifications of synuclein within intracellular aggregates that accumulate in Parkinson's disease brains, as well as the ability of a number of oxidative insults to induce synuclein oligomerization. The relationship between these relatively small soluble oligomers, potentially neurotoxic synuclein protofibrils, and synuclein filaments remains unclear. We have found that metal-catalyzed oxidation of alpha-synuclein inhibited formation of synuclein filaments with a concomitant accumulation of beta sheet-rich oligomers that may represent synuclein protofibrils. Similar results with a number of oxidative and enzymatic treatments suggest that the covalent association of synuclein into higher molecular mass oligomers/protofibrils represents an alternate pathway from filament formation and renders synuclein less prone to proteasomal degradation.

Promoting trimerization of soluble human immunodeficiency virus type 1 (HIV-1) Env through the use of HIV-1/simian immunodeficiency virus chimeras.

The envelope proteins (Env) of human immunodeficiency virus type 1 (HIV-1) and simian immunodeficiency virus (SIV) form homo-oligomers in the endoplasmic reticulum. The oligomeric structure of Env is maintained, but is less stable, after cleavage in a Golgi compartment and transport to the surface of infected cells. Functional, virion-associated HIV-1 and SIV Env have an almost exclusively trimeric structure. In addition, a soluble form of SIV Env (gp140) forms a nearly homogeneous population of trimers. Here, we describe the oligomeric structure of soluble, uncleaved HIV-1 gp140 and modifications that promote a stable trimeric structure. Biochemical and biophysical analyses, including sedimentation equilibrium and scanning transmission electron microscopy, revealed that unmodified HIV-1 gp140 purified as a heterogeneous range of oligomeric species, including dimers and aggregates. Deletion of the V2 domain alone or, especially, both the V1 and V2 domains reduced dimer formation but promoted aggregation rather than trimerization. Expressing gp140 with mannose-only oligosaccharides did not eliminate heterogeneity. Replacement of the entire gp41 segment of HIV-1 gp140 or just the N-terminal half (85 amino acids) of this segment with the corresponding region of SIV was sufficient to confer efficient trimerization for gp140 derived from clade B and C isolates. Importantly, the relatively small segment of the HIV Env replaced by SIV sequences contains no known targets of neutralizing antibody. The soluble trimeric form of HIV-1 Env should prove useful for assessment of antigenic structure and immunogenicity.

Antiviral activity of RhoA-derived peptides against respiratory syncytial virus is dependent on formation of peptide dimers.

A synthetic peptide containing amino acids 77 to 95 of the intracellular GTPase RhoA has previously been shown to inhibit replication of respiratory syncytial virus (RSV) in cultured cells. We show that residues 80 to 90 of RhoA are sufficient for this activity and that the cysteine residue at position 83 is critical. Further studies with an optimal peptide sequence containing amino acids 80 to 94 of RhoA revealed that the antiviral potency of the peptide is dependent on the oxidation of cysteine 83. Size-exclusion chromatography and sedimentation equilibrium studies of the peptide comprising residues 80 to 94 revealed that it is capable of forming aggregates in both reduced and oxidized states. A peptide (83A) in which the cysteine residue is replaced by an alanine does not form dimers or higher-order aggregates and did not inhibit RSV replication at any concentration tested. These data indicate that formation of peptide multimers is necessary for the antiviral activities of RhoA-derived peptides and suggest that the observed antiviral activities of these peptides may be unrelated to the biological functions of their parent molecule.

Modern analytical ultracentrifugation in protein science: a tutorial review.

Analytical ultracentrifugation (AU) is reemerging as a versatile tool for the study of proteins. Monitoring the sedimentation of macromolecules in the centrifugal field allows their hydrodynamic and thermodynamic characterization in solution, without interaction with any matrix or surface. The combination of new instrumentation and powerful computational software for data analysis has led to major advances in the characterization of proteins and protein complexes. The pace of new advancements makes it difficult for protein scientists to gain sufficient expertise to apply modern AU to their research problems. To address this problem, this review builds from the basic concepts to advanced approaches for the characterization of protein systems, and key computational and internet resources are provided. We will first explore the characterization of proteins by sedimentation velocity (SV). Determination of sedimentation coefficients allows for the modeling of the hydrodynamic shape of proteins and protein complexes. The computational treatment of SV data to resolve sedimenting components has been achieved. Hence, SV can be very useful in the identification of the oligomeric state and the stoichiometry of heterogeneous interactions. The second major part of the review covers sedimentation equilibrium (SE) of proteins, including membrane proteins and glycoproteins. This is the method of choice for molar mass determinations and the study of self-association and heterogeneous interactions, such as protein-protein, protein-nucleic acid, and protein-small molecule binding.

Oligomeric structure of the human immunodeficiency virus type 1 envelope protein on the virion surface.

The envelope protein (Env) of human immunodeficiency virus type 1 forms homo-oligomers in the endoplasmic reticulum. The oligomeric structure of Env is maintained after cleavage in a Golgi compartment and transport to the surfaces of infected cells, where incorporation into budding virions takes place. Here, we use biophysical techniques to assess the oligomeric valency of virion-associated Env prior to fusion activation. Virion-associated Env oligomers were stabilized by chemical cross-linking prior to detergent extraction and were purified by immunoaffinity chromatography. Gel filtration revealed a single predominant oligomeric species, and sedimentation equilibrium analysis-derived mass values indicated a trimeric structure. Determination of the masses of individual Env molecules by scanning transmission electron microscopy demonstrated that virion-associated Env was trimeric, and a triangular morphology was observed in 20 to 30% of the molecules. These results, which firmly establish the oligomeric structure of human immunodeficiency virus virion-associated Env, parallel those of our previous analysis of the simian immunodeficiency virus Env.