Interface Engineering via Ti3C2Tx MXene Enabled Highly Efficient Bifunctional NiCoP Array Catalysts for Alkaline Water Splitting.

Developing a non-noble metal-based bifunctional electrocatalyst with high efficiency and stability for overall water splitting is desirable for renewable energy systems. We developed a novel method to fabricate a heterostructured electrocatalyst, comprising a NiCoP nanoneedle array grown on Ti3C2Tx MXene-coated Ni foam (NCP-MX/NF) using a dip-coating hydrothermal method, followed by phosphorization. Due to the abundance of active sites, enhanced electronic kinetics, and sufficient electrolyte accessibility resulting from the synergistic effects of NCP and MXene, NCP-MX/NF bifunctional alkaline catalysts afford superb electrocatalytic performance, with a low overpotential (72 mV at 10 mA cm-2 for HER and 303 mV at 50 mA cm-2 for OER), a low Tafel slope (49.2 mV dec-1 for HER and 69.5 mV dec-1 for OER), and long-term stability. Moreover, the overall water splitting performance of NCP-MX/NF, which requires potentials as low as 1.54 and 1.76 V at a current density of 10 and 50 mA cm-2, respectively, exceeded the performance of the Pt/C∥IrO2 couple in terms of overall water splitting. Density functional theory (DFT) calculations for the NCP/Ti3C2O2 interface model predicted the catalytic contribution to interfacial formation by analyzing the electronic redistribution at the interface. This contribution was also evaluated by calculating the adsorption energetics of the descriptor molecules (H2O and the H and OER intermediates).

Photochemical tuning of dynamic defects for high-performance atomically dispersed catalysts.

Developing active and stable atomically dispersed catalysts is challenging because of weak non-specific interactions between catalytically active metal atoms and supports. Here we demonstrate a general method for synthesizing atomically dispersed catalysts via photochemical defect tuning for controlling oxygen-vacancy dynamics, which can induce specific metal-support interactions. The developed synthesis method offers metal-dynamically stabilized atomic catalysts, and it can be applied to reducible metal oxides, including TiO2, ZnO and CeO2, containing various catalytically active transition metals, including Pt, Ir and Cu. The optimized Pt-DSA/TiO2 shows unprecedentedly high photocatalytic hydrogen evolution activity, producing 164 mmol g-1 h-1 with a turnover frequency of 1.27 s-1. Furthermore, it generates 42.2 mmol gsub-1 of hydrogen via a non-recyclable-plastic-photoreforming process, achieving a total conversion of 98%; this offers a promising solution for mitigating plastic waste and simultaneously producing valuable energy sources.

Sunlight-Driven Self-Cleaning Ultrafine Particulate Matter Filter with Antibacterial Activity.

Air pollution by particulate matter (PM) and airborne pathogens causes severe health problems in the human body. Presently, popular disposable air filters yield huge waste and have a fatal impact on the environment. Postuse cleaning of air filters also leads to secondary air and water pollution. Here, we report a sunlight-driven self-cleaning PM filter by coupling a full-solar-spectrum-active photocatalyst comprising up-conversion nanoparticles (UCNPs) decorated with semiconductor iron(III) oxide (UCNP@α-Fe2O3) shells stabilized upon graphene functionalized borosilicate fibrous membrane (rGO-BF). While rGO-BF ensures high PM adsorption, UCNP@α-Fe2O3 (NP) enables self-photodegradation of adsorbed PM under abundant sunlight and subsequent membrane regeneration, while preventing secondary air or water pollution. Rational surface chemistry and optimal microstructure enable our filters to remove >99% of PM2.5 under deplorable air-quality conditions. Moreover, our filter shows excellent antibacterial activity toward E. coli and S. aureus, demonstrating its potential for practical utilization in face masks, air filtering devices, and protective medical wear. This work successfully suggests an intriguing design platform for self-sustainable zero-waste air filter membranes.

Interpersonal sensitivity and childhood trauma in patients with major depressive disorder, bipolar I, and II disorder.

Childhood trauma and interpersonal sensitivity impact the development of mood disorders. In this study, we investigate the association between childhood trauma and interpersonal sensitivity in patients with mood disorders. A total 775 patients (major depressive disorder [MDD, n = 241], bipolar I disorder [BD I, n = 119], and bipolar II disorder [BD II, n = 415]) and 734 controls. For evaluation, we used the Childhood Trauma Questionnaire-Short Form (CTQ) and Interpersonal Sensitivity Measure (IPSM). We examined between-group differences for each subscale in the CTQ and IPSM. Patients with BD II had significantly higher IPSM total scores than patients with MDD, BD I, or controls. The CTQ total score was related to the IPSM total score in all participants and subgroups. Among the CTQ subscales, emotional abuse showed the highest correlation with the IPSM total score, while separation anxiety and fragile inner self showed higher positive correlations with CTQ than the other subscales of IPSM in all patient groups and the control group, respectively. The findings reveal that childhood trauma and interpersonal sensitivity are positively correlated among patients with MDD, BD I, and BD II, and that interpersonal sensitivity is higher in patients with BD II than those with BD I or MDD. Childhood trauma is associated with interpersonal sensitivity, and each trauma type has a different impact on mood disorders. We expect that this study will encourage future research on interpersonal sensitivity and childhood trauma in mood disorders to improve treatment approaches.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts.

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Lowering the Temperature of Solid Oxide Electrochemical Cells Using Triple-Doped Bismuth Oxides.

Despite the great potential of solid oxide electrochemical cells (SOCs) as highly efficient energy conversion devices, the undesirable high operating temperature limits their wider applicability. Herein, a novel approach to developing high-performance low-temperature SOCs (LT-SOCs) is presented through the use of an Er, Y, and Zr triple-doped bismuth oxide (EYZB). This study demonstrates that EYZB exhibits > 147 times higher ionic conductivity of 0.44 S cm-1 at 600 °C compared to commercial Y-stabilized zirconia electrolyte with excellent stability over 1000 h. By rationally incorporating EYZB in composite electrodes and bilayer electrolytes, the zirconia-based electrolyte LT-SOC achieves the unprecedentedly high performance of 3.45 and 2.02 W cm-2 in the fuel cell mode and 2.08 and 0.95 A cm-2 in the electrolysis cell mode at 700 °C and 600 °C, respectively. Further, a distinctive microstructural feature of EYZB that largely extends triple phase boundary at the interface is revealed through digital twinning. This work provides insights for developing high-performance LT-SOCs.

Layer-Controlled Growth of Single-Crystalline 2D Bi2O2Se Film Driven by Interfacial Reconstruction.

As semiconductor scaling continues to reach sub-nanometer levels, two-dimensional (2D) semiconductors are emerging as a promising candidate for the post-silicon material. Among these alternatives, Bi2O2Se has risen as an exceptionally promising 2D semiconductor thanks to its excellent electrical properties, attributed to its appropriate bandgap and small effective mass. However, unlike other 2D materials, growth of large-scale Bi2O2Se films with precise layer control is still challenging due to its large surface energy caused by relatively strong interlayer electrostatic interactions. Here, we present the successful growth of a wafer-scale (∼3 cm) Bi2O2Se film with precise thickness control down to the monolayer level on TiO2-terminated SrTiO3 using metal-organic chemical vapor deposition (MOCVD). Scanning transmission electron microscopy (STEM) analysis confirmed the formation of a [BiTiO4]1- interfacial structure, and density functional theory (DFT) calculations revealed that the formation of [BiTiO4]1- significantly reduced the interfacial energy between Bi2O2Se and SrTiO3, thereby promoting 2D growth. Additionally, spectral responsivity measurements of two-terminal devices confirmed a bandgap increase of up to 1.9 eV in monolayer Bi2O2Se, which is consistent with our DFT calculations. Finally, we demonstrated high-performance Bi2O2Se field-effect transistor (FET) arrays, exhibiting an excellent average electron mobility of 56.29 cm2/(V·s). This process is anticipated to enable wafer-scale applications of 2D Bi2O2Se and facilitate exploration of intriguing physical phenomena in confined 2D systems.

Nanocluster Surface Microenvironment Modulates Electrocatalytic CO2 Reduction.

The catalytic activity and product selectivity of the electrochemical CO2 reduction reaction (eCO2RR) depend strongly on the local microenvironment of mass diffusion at the nanostructured catalyst and electrolyte interface. Achieving a molecular-level understanding of the electrocatalytic reaction requires the development of tunable metal-ligand interfacial structures with atomic precision, which is highly challenging. Here, the synthesis and molecular structure of a 25-atom silver nanocluster interfaced with an organic shell comprising 18 thiolate ligands are presented. The locally induced hydrophobicity by bulky alkyl functionality near the surface of the Ag25 cluster dramatically enhances the eCO2RR activity (CO Faradaic efficiency, FECO: 90.3%) with higher CO partial current density (jCO) in an H-cell compared to Ag25 cluster (FECO: 66.6%) with confined hydrophilicity, which modulates surface interactions with water and CO2. Remarkably, the hydrophobic Ag25 cluster exhibits jCO as high as -240 mA cm-2 with FECO >90% at -3.4 V cell potential in a gas-fed membrane electrode assembly device. Furthermore, this cluster demonstrates stable eCO2RR over 120 h. Operando surface-enhanced infrared absorption spectroscopy and theoretical simulations reveal how the ligands alter the neighboring water structure and *CO intermediates, impacting the intrinsic eCO2RR activity, which provides atomistic mechanistic insights into the crucial role of confined hydrophobicity.

Network structure of symptomatology of adult attention-deficit hyperactivity disorder in patients with mood disorders.

Patients with mood disorders commonly manifest comorbid psychiatric disorders, including attention-deficit/hyperactivity disorder (ADHD). However, few studies have evaluated ADHD symptoms in this population. The current study aimed to explore the network structure of ADHD symptomology and identify central symptoms in patients with mood disorders. The Korean version of the Adult ADHD Self-Report Scale was used to assess the overall ADHD symptoms in 1,086 individuals diagnosed with mood disorders (major depressive disorder [n = 373], bipolar I disorder [n = 314], and bipolar II disorder [n = 399]). We used exploratory graph analysis to detect the number of communities, and the network structure was analyzed using regularized partial correlation models. We identified the central ADHD symptom using centrality indices. Network comparison tests were conducted with different subgroups of patients with mood disorders, including three mood diagnosis groups, between the patients who met the diagnostic criteria for ADHD [ADHD-suspected, n = 259] in their self-report and the others [ADHD-non-suspected, n = 827], and groups with high [n = 503] versus low [n = 252] levels of depressive state. The network analysis detected four communities: disorganization, agitation/restlessness, hyperactivity/impulsivity, and inattention. The centrality indices indicated that "feeling restless" was the core ADHD symptom. The result was replicated in the subgroup analyses within our clinically diverse population of mood disorders, encompassing three presentations: Patients with suspected ADHD, patients without suspected ADHD, and patients with a high depressive state. Our findings reveal that "feeling restless" is the central ADHD symptom. The treatment intervention for "feeling restless" may thus play a pivotal role in tackling ADHD symptoms in adult patients with mood disorders.

Highly Efficient Nitrogen-Fixing Microbial Hydrogel Device for Sustainable Solar Hydrogen Production.

Conversion of sunlight and organic carbon substrates to sustainable energy sources through microbial metabolism has great potential for the renewable energy industry. Despite recent progress in microbial photosynthesis, the development of microbial platforms that warrant efficient and scalable fuel production remains in its infancy. Efficient transfer and retrieval of gaseous reactants and products to and from microbes are particular hurdles. Here, inspired by water lily leaves floating on water, a microbial device designed to operate at the air-water interface and facilitate concomitant supply of gaseous reactants, smooth capture of gaseous products, and efficient sunlight delivery is presented. The floatable device carrying Rhodopseudomonas parapalustris, of which nitrogen fixation activity is first determined through this study, exhibits a hydrogen production rate of 104 mmol h-1  m-2 , which is 53 times higher than that of a conventional device placed at a depth of 2 cm in the medium. Furthermore, a scaled-up device with an area of 144 cm2 generates hydrogen at a high rate of 1.52 L h-1  m-2 . Efficient nitrogen fixation and hydrogen generation, low fabrication cost, and mechanical durability corroborate the potential of the floatable microbial device toward practical and sustainable solar energy conversion.

Medial patellofemoral ligament reconstruction appears to be a better treatment than repair, proximal realignment, or conservative management for primary patellar dislocation: A network meta-analysis.

BACKGROUND: The purpose of this study was to compare the functional outcomes and re-dislocation rates of medial patellofemoral ligament (MPFL) reconstruction, MPFL repair, combined proximal realignment (CPR), and conservative management for primary patellar dislocation by conducting a systematic literature search of the available studies. The hypothesis was that MPFL repair and MPFL reconstruction would be better options for treating primary patellar dislocation. METHODS: Randomized controlled trials or prospective studies of primary patellar dislocation treated with MPFL reconstruction, MPFL repair, CPR, or conservative management were identified from the MEDLINE, EMBASE, and the Cochrane Library databases through December 31, 2021. A total of 626 patients met the prespecified inclusion criteria. The methodological quality of each study was assessed using a risk of bias table, Detsky quality index, and Newcastle-Ottawa Scale. The end-point data collected included comparisons of the mean in functional scores on knee outcomes scales and the number of patients who experienced re-dislocation. A network meta-analysis of the relevant literature was performed to investigate which treatment showed better outcomes. RESULTS: In total, 10 trials were included in this study. There was no statistically significant difference in the subgroup analysis in terms of the functional outcomes among MPFL reconstruction, MPFL repair, CPR, and conservative management. However, MPFL reconstruction showed statistically significantly better outcomes than MPFL repair, CPR, or conservative management in terms of the re-dislocation rate. Additionally, surface under the cumulative ranking curve percentage showed that MPFL reconstruction had a lower probability of re-dislocation than MPFL repair even though there was no significant difference (0.24, 95% confidence interval: 0.02-2.91). CONCLUSION: Using a network meta-analysis, this meta-analysis showed that there was no significant difference in functional outcomes in a subgroup analysis. In re-dislocation subgroup analysis, MPFL repair and MPFL reconstruction produced significantly better results than other treatments. Also, surface under the cumulative ranking curve percentage showed that MPFL reconstruction had a lower probability of re-dislocation than MPFL repair.

Floatable photocatalytic hydrogel nanocomposites for large-scale solar hydrogen production.

Storing solar energy in chemical bonds aided by heterogeneous photocatalysis is desirable for sustainable energy conversion. Despite recent progress in designing highly active photocatalysts, inefficient solar energy and mass transfer, the instability of catalysts and reverse reactions impede their practical large-scale applications. Here we tackle these challenges by designing a floatable photocatalytic platform constructed from porous elastomer-hydrogel nanocomposites. The nanocomposites at the air-water interface feature efficient light delivery, facile supply of water and instantaneous gas separation. Consequently, a high hydrogen evolution rate of 163 mmol h-1 m-2 can be achieved using Pt/TiO2 cryoaerogel, even without forced convection. When fabricated in an area of 1 m2 and incorporated with economically feasible single-atom Cu/TiO2 photocatalysts, the nanocomposites produce 79.2 ml of hydrogen per day under natural sunlight. Furthermore, long-term stable hydrogen production in seawater and highly turbid water and photoreforming of polyethylene terephthalate demonstrate the potential of the nanocomposites as a commercially viable photocatalytic system.

Heterostructured mixed metal oxide electrocatalyst for the hydrogen evolution reaction.

The hydrogen evolution reaction (HER) has attracted considerable attention lately because of the high energy density and environmental friendliness of hydrogen energy. However, lack of efficient electrocatalysts and high price hinder its wide application. Compared to a single-phase metal oxide catalyst, mixed metal oxide (MMO) electrocatalysts emerge as a potential HER catalyst, especially providing heterostructured interfaces that can efficiently overcome the activation barrier for the hydrogen evolution reaction. In this mini-review, several design strategies for the synergistic effect of the MMO catalyst on the HER are summarized. In particular, metal oxide/metal oxide and metal/metal oxide interfaces are explained with fundamental mechanistic insights. Finally, existing challenges and future perspectives for the HER are discussed.

Different Pattern of T-Score Discordance between Patients with Atypical Femoral Fracture and Femur Neck Fracture.

BACKGROUND: Our study evaluated the prevalence and pattern of T-score discordance between the spine and hip in Korean patients with atypical femoral fracture (AFF) and femur neck fracture (FNF). METHODS: A total of 49 patients (all women) who were treated for AFF and 1:3 matched 147 female patients with FNF were included from January 2012 to August 2022. A discordance of more than 1.5 between lumbar spine and femur neck bone mineral density (BMD) was defined as a difference and divided into 3 groups: lumbar low (LL; lumbar BMD is less than femur neck BMD), no discordance (ND), and femur neck low (FL; femur neck BMD is less than lumbar BMD). We compared the prevalence and pattern of discordance between 2 groups, and the associated risk factors of T-score discordance among the subjects were evaluated using regression analysis. RESULTS: The prevalence of discordance was significantly higher in patients with AFF (51%) than in those with FNF (25.2%; p<0.001). LL discordance was found in 46.9% of the patients with AFF but only 4.8% in those with FNF. Conversely, FL discordance was found in 4.1% of the patients with AFF and 20.4% in those with FNF, respectively. No specific risk factor was found as T-score discordance in the 2 groups. CONCLUSIONS: Clinicians should be aware that the pattern of T-score discordance can vary depending on the location of osteoporotic fractures. In addition, a longitudinal study would be necessary to verify the pattern of T-score discordance related to the osteoporotic fracture location.

Geometric Tuning of Single-Atom FeN4 Sites via Edge-Generation Enhances Multi-Enzymatic Properties.

Single-atom nanozymes (SAzymes) are considered promising alternatives to natural enzymes. The catalytic performance of SAzymes featuring homogeneous, well-defined active structures can be enhanced through elucidating structure-activity relationship and tailoring physicochemical properties. However, manipulating enzymatic properties through structural variation is an underdeveloped approach. Herein, the synthesis of edge-rich Fe single-atom nanozymes (FeNC-edge) via an H2 O2 -mediated edge generation is reported. By controlling the number of edge sites, the peroxidase (POD)- and oxidase (OXD)-like performance is significantly enhanced. The activity enhancement results from the presence of abundant edges, which provide new anchoring sites to mononuclear Fe. Experimental results combined with density functional theory (DFT) calculations reveal that FeN4 moieties in the edge sites display high electron density of Fe atoms and open N atoms. Finally, it is demonstrated that FeNC-edge nanozyme effectively inhibits tumor growth both in vitro and in vivo, suggesting that edge-tailoring is an efficient strategy for developing artificial enzymes as novel catalytic therapeutics.

Atom-Precise Heteroatom Core-Tailoring of Nanoclusters for Enhanced Solar Hydrogen Generation.

While core-shell nanomaterials are highly desirable for realizing enhanced optical and catalytic properties, their synthesis with atomic-level control is challenging. Here, the synthesis and crystal structure of [Au12 Ag32 (SePh)30 ]4- , the first example of selenolated Au-Ag core-shell nanoclusters, comprising a gold icosahedron core trapped in a silver dodecahedron, which is protected by an Ag12 (SePh)30 shell, is presented. The gold core strongly modifies the overall electronic structure and induces synergistic effects, resulting in high enhancements in the stability and near-infrared-II photoluminescence. The Au12 Ag32 and its homometal analog Ag44 , show strong interactions with oxygen vacancies of TiO2 , facilitating the interfacial charge transfer for photocatalysis. Indeed, the Au12 Ag32 /TiO2 exhibits remarkable solar H2 production (6810 µmol g-1  h-1 ), which is ≈6.2 and ≈37.8 times higher than that of Ag44 /TiO2 and TiO2 , respectively. Good stability and recyclability with minimal catalytic activity loss are additional features of Au12 Ag32 /TiO2 . The experimental and computational results reveal that the Au12 Ag32 acts as an efficient cocatalyst by possessing a favorable electronic structure that aligns well with the TiO2 bands for the enhanced separation of photoinduced charge carriers due to the relatively negatively charged Au12 core. These atomistic insights will motivate uncovering of the structure-catalytic activity relationships of other nanoclusters.

Relationship between childhood trauma and resilience in patients with mood disorders.

BACKGROUND: Childhood trauma has lasting negative impacts on individuals' psychological functioning. However, there is limited empirical evidence on the association between childhood trauma and resilience and none examining such relationship among diverse clinical populations. This study aimed to investigate the relationship in patients with major depressive disorder, bipolar I disorder, bipolar II disorder, and a comparison group. METHODS: In total, 787 psychiatric patients and 734 people from the general population participated in the study. The Childhood Trauma Questionnaire-Short Form and Connor-Davidson Resilience Scale were used to assess childhood trauma and resilience, respectively. RESULTS: Individuals with childhood trauma showed lower levels of resilience in all subjects; among them, those who experienced emotional abuse and emotional neglect exhibited even stronger associations than other types of childhood trauma. There was a significant difference in the negative relationship between childhood trauma and resilience by group, where the association was more prominent in the comparison group than in MDD and BD II patient groups. LIMITATIONS: The generalizability of our results may be limited due to unproportionate patient sample size. Also, we could not examine the causal relationship between childhood trauma and resilience. CONCLUSION: Childhood trauma and resilience had a significantly negative association. Our results suggest that people who have experienced emotional abuse and emotional neglect should be closely assisted to develop resilience. Interventions that promote resilience should be provided to individuals predisposed to psychological risks as a result of childhood trauma.

Toward economical application of carbon capture and utilization technology with near-zero carbon emission.

Carbon capture and utilization technology has been studied for its practical ability to reduce CO2 emissions and enable economical chemical production. The main challenge of this technology is that a large amount of thermal energy must be provided to supply high-purity CO2 and purify the product. Herein, we propose a new concept called reaction swing absorption, which produces synthesis gas (syngas) with net-zero CO2 emission through direct electrochemical CO2 reduction in a newly proposed amine solution, triethylamine. Experimental investigations show high CO2 absorption rates (>84%) of triethylamine from low CO2 concentrated flue gas. In addition, the CO Faradaic efficiency in a triethylamine supplied membrane electrode assembly electrolyzer is approximately 30% (@-200 mA cm-2), twice higher than those in conventional alkanolamine solvents. Based on the experimental results and rigorous process modeling, we reveal that reaction swing absorption produces high pressure syngas at a reasonable cost with negligible CO2 emissions. This system provides a fundamental solution for the CO2 crossover and low system stability of electrochemical CO2 reduction.

Application of 2D Materials for Adsorptive Removal of Air Pollutants.

Air pollution is on the priority list of global safety issues, with the concern of fatal environmental and public health deterioration. 2D materials are potential adsorbent materials for environmental decontamination, owing to their high surface area, manageable interlayer binding, large surface-to-volume ratio, specific binding capability, and chemical, thermal, and mechanistic stability. Specifically, graphene oxide and reduced graphene oxide have been attracting attention, taking advantage of their low cost synthesis, excessive oxygen containing surface functionalities, and intrinsic aqueous dispersibility, making them desirable for the development of cost-effective, high performance air filters. Many different material designs have been proposed to expand their filtration capability, including the functionalization and integration with other metals and metal oxides, which act not only as binding agents to the target pollutants but also as antimicrobial agents. This review highlights the advantages and drawbacks of 2D materials for air filtration and summarizes the interrelationships among various strategies and the resultant filtration performance in terms of structural engineering, morphology control, and material compositions. Finally, potential future directions are suggested toward the idealized designs of 2D material based air filters.