Group A Streptococcus induces lysosomal dysfunction in THP-1 macrophages.

The human-specific bacterial pathogen group A Streptococcus (GAS) is a significant cause of morbidity and mortality. Macrophages are important to control GAS infection, but previous data indicate that GAS can persist in macrophages. In this study, we detail the molecular mechanisms by which GAS survives in THP-1 macrophages. Our fluorescence microscopy studies demonstrate that GAS is readily phagocytosed by macrophages, but persists within phagolysosomes. These phagolysosomes are not acidified, which is in agreement with our findings that GAS cannot survive in low pH environments. We find that the secreted pore-forming toxin Streptolysin O (SLO) perforates the phagolysosomal membrane, allowing leakage of not only protons but also large proteins including the lysosomal protease cathepsin B. Additionally, GAS recruits CD63/LAMP-3, which may contribute to lysosomal permeabilization, especially in the absence of SLO. Thus, although GAS does not inhibit fusion of the lysosome with the phagosome, it has multiple mechanisms to prevent proper phagolysosome function, allowing for persistence of the bacteria within the macrophage. This has important implications for not only the initial response but also the overall functionality of the macrophages, which may lead to the resulting pathologies in GAS infection. Our data suggest that therapies aimed at improving macrophage function may positively impact patient outcomes in GAS infection.

Structural basis of broad SARS-CoV-2 cross-neutralization by affinity-matured public antibodies.

Descendants of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) Omicron variant now account for almost all SARS-CoV-2 infections. The Omicron variant and its sublineages have spike glycoproteins that are highly diverged from the pandemic founder and first-generation vaccine strain, resulting in significant evasion from monoclonal antibody therapeutics and vaccines. Understanding how commonly elicited antibodies can broaden to cross-neutralize escape variants is crucial. We isolate IGHV3-53, using "public" monoclonal antibodies (mAbs) from an individual 7 months post infection with the ancestral virus and identify antibodies that exhibit potent and broad cross-neutralization, extending to the BA.1, BA.2, and BA.4/BA.5 sublineages of Omicron. Deep mutational scanning reveals these mAbs' high resistance to viral escape. Structural analysis via cryoelectron microscopy of a representative broadly neutralizing antibody, CAB-A17, in complex with the Omicron BA.1 spike highlights the structural underpinnings of this broad neutralization. By reintroducing somatic hypermutations into a germline-reverted CAB-A17, we delineate the role of affinity maturation in the development of cross-neutralization by a public class of antibodies.

Left Upper Division Segmentectomy Compared with Lobectomy for Lung Expansion and Bronchus Tortuosity.

BACKGROUND: For patients with left upper lobe lesions, the functional benefit of left upper division segmentectomy over left upper lobectomy remains controversial. This study evaluated the clinical and functional outcomes after these two procedures. METHODS: This retrospective study included 135 patients with left upper lobe lesions (left upper lobectomy, 110; left upper division segmentectomy, 25). Propensity score matching was used to compare the two groups. Spirometry and computed tomography volume assessments were performed to evaluate bronchus angle and tortuosity. Short-term clinical respiratory symptoms were assessed via medical record reviews. RESULTS: Patients in both groups had similar preoperative characteristics, apart from tumor size (left upper division segmentectomy, 1.6 ± 0.9 cm; left upper lobectomy, 2.8 ± 1.7 cm; p = 0.002). After propensity score matching, both groups had similar preoperative spirometry and pathological results. The postoperative spirometry results were similar; however, the left upper division segmentectomy group had a significantly smaller decrease in left-side computed tomography lung volume compared with that in the left upper lobectomy group (left upper division segmentectomy, 323.6 ± 521.4 mL; left upper lobectomy, 690.7 ± 332.8 mL; p = 0.004). The left main bronchus-curvature index was higher in the left upper lobectomy group (left upper division segmentectomy, 1.074 ± 0.035; left upper lobectomy, 1.097 ± 0.036; p = 0.013), and more patients had persistent cough in the left upper lobectomy group (p = 0.001). CONCLUSIONS: Left upper division segmentectomy may be a promising option for preventing marked bronchial angulation and decreasing postoperative persistent cough in patients with left upper lobe lung cancer.

Conversion of single-energy computed tomography to parametric maps of dual-energy computed tomography using convolutional neural network.

OBJECTIVES: We propose a deep learning (DL) multi-task learning framework using convolutional neural network (CNN) for a direct conversion of single-energy CT (SECT) to three different parametric maps of dual-energy CT (DECT): Virtual-monochromatic image (VMI), effective atomic number (EAN), and relative electron density (RED). METHODS: We propose VMI-Net for conversion of SECT to 70, 120, and 200 keV VMIs. In addition, EAN-Net and RED-Net were also developed to convert SECT to EAN and RED. We trained and validated our model using 67 patients collected between 2019 and 2020. SECT images with 120 kVp acquired by the DECT (IQon spectral CT, Philips) were used as input, while the VMIs, EAN, and RED acquired by the same device were used as target. The performance of the DL framework was evaluated by absolute difference (AD) and relative difference (RD). RESULTS: The VMI-Net converted 120 kVp SECT to the VMIs with AD of 9.02 Hounsfield Unit, and RD of 0.41% compared to the ground truth VMIs. The ADs of the converted EAN and RED were 0.29 and 0.96, respectively, while the RDs were 1.99% and 0.50% for the converted EAN and RED, respectively. CONCLUSIONS: SECT images were directly converted to the three parametric maps of DECT (ie, VMIs, EAN, and RED). By using this model, one can generate the parametric information from SECT images without DECT device. Our model can help investigate the parametric information from SECT retrospectively. ADVANCES IN KNOWLEDGE: Deep learning framework enables converting SECT to various high-quality parametric maps of DECT.

Noise phenomena in distress cries of term and very preterm infants at term-equivalent age.

BACKGROUND AND AIM: To examine whether the noise components in distress cries of term infants differed from very preterm infants whose cries were collected at a comparable "corrected" gestational age. METHODS: Distress cries were collected from 20 term and 20 preterm infants. The cries were acoustically examined for the occurrence of aperiodic phonatory behavior within and across moments of crying. RESULTS: The findings indicated no significant differences between term and preterm infants at term age in the occurrence of noise. CONCLUSIONS: Distress cries of both term and term-equivalent preterm infants appear to contain high instances of phonatory noise. The high arousal associated with distress crying and associated increase in subglottal pressure appeared to influence both term and term-equivalent preterm infants similarly.

A randomized comparison of three intubation techniques/tube materials for nasotracheal intubation.

PURPOSE: We sought to compare three intubation methods using different intubation techniques/tube materials for tube advancement from the nasal cavity into the oral cavity during nasotracheal intubation. METHODS: We conducted a randomized clinical trial with adult patients scheduled to undergo elective surgery requiring nasotracheal intubation for general anesthesia. Participants were randomly allocated to a polyvinyl chloride (PVC) tube group (group P), PVC tube attached to a rubber catheter group (group PR), or velvet-soft PVC tube group (group V). Tracheal intubation was then performed based on group allocation. The primary outcome was the first-attempt success rate of tube advancement into the oral cavity; secondary outcomes included the time required for tube advancement into the oral cavity, total intubation time, and the incidence of epistaxis. RESULTS: A total of 149 patients were included in the study. The first-attempt success rate in group V (90%) was significantly higher than that in group P (58%) (odds ratio, 6.5; 95% confidence interval [CI], 2.2 to 19.2), but similar to that in group PR (100%). The mean (standard deviation) time required for tube advancement into the oral cavity was significantly shorter in group V (16 [13] sec) than in group PR [40 (10) sec; 95% CI of mean difference, 17 to 30] and group P (26 [16] sec; 95% CI of mean difference, 3 to 16). Total intubation time was longest in group PR. Epistaxis occurred the least in group V. CONCLUSIONS: Among the three intubation techniques/tube materials for nasotracheal intubation, the velvet-soft PVC tube provided the highest first-attempt success rate, most expeditious advancement into the oral cavity, and lowest incidence of epistaxis. STUDY REGISTRATION: ClinicalTrials.gov (NCT04695444); first submitted 30 December 2020.

RéSUMé: OBJECTIF: Nous avons cherché à comparer trois méthodes d'intubation utilisant différentes techniques d'intubation / matériaux de sondes pour l'avancement de la sonde de la cavité nasale dans la cavité buccale pendant l'intubation nasotrachéale. MéTHODE: Des patient·es devant recevoir une intubation nasotrachéale ont été réparti·es au hasard dans un groupe avec sondes en polychlorure de vinyle (PVC) (groupe P), un groupe avec sondes en PVC attachées à un cathéter en caoutchouc (groupe PR) ou un groupe avec sondes en PVC doux comme du velours (groupe V). L'intubation trachéale a ensuite été réalisée en fonction de l'affectation du groupe. Le critère d'évaluation principal était le taux de réussite de la première tentative d'avancement de la sonde dans la cavité buccale; les critères d'évaluation secondaires comprenaient le temps nécessaire à l'avancement de la sonde dans la cavité buccale, la durée totale de l'intubation et l'incidence d'épistaxis. RéSULTATS: Au total, 149 patient·es ont été inclus·es dans l'étude. Le taux de réussite de l'intubation à la première tentative était significativement plus élevé dans le groupe V (90 %) que dans le groupe P (58 %) (rapport de cotes, 6,5; intervalle de confiance à 95 % [IC], 2,2 à 19,2), mais similaire à celui du groupe PR (100 %). Le temps moyen (écart type) nécessaire pour l'avancement de la sonde dans la cavité buccale était significativement plus court dans le groupe V (16 [13] sec) que dans le groupe PR (40 [10] sec; IC 95 % de la différence moyenne, 17 à 30) et dans le groupe P (26 [16] sec; IC 95 % de la différence moyenne, 3 à 16). La durée totale d'intubation était la plus longue dans le groupe PR. C'est dans le groupe V que l'épistaxis a été la moins fréquente. CONCLUSION: Parmi les trois techniques d'intubation/matériaux de sonde pour l'intubation nasotrachéale, le tube en PVC doux comme du velours a fourni le taux de réussite de première tentative le plus élevé, l'avancement le plus rapide dans la cavité buccale et l'incidence d'épistaxis la plus faible. ENREGISTREMENT DE L'éTUDE: ClinicalTrials.gov (NCT04695444); première soumission le 30 décembre 2020.

Discharge Time of Day and 30-day Hospital Reutilization at an Academic Children's Hospital.

BACKGROUND: Pediatric hospital discharge is a complex process. Although morning discharges are operationally preferred, little is known about the association between discharge time of day and discharge outcomes. We assessed whether children discharged from the hospital in the evening have a higher 30-day hospital reutilization rate than those discharged in the morning or afternoon. METHODS: We conducted a retrospective cohort study on discharges from a children's hospital between July 2016 and December 2019. The cohort was divided into morning, afternoon, and evening discharges. Multivariable modified least-squares regression was used to compare 30-day all-cause hospital reutilization rates between morning, afternoon, and evening discharges while adjusting for demographic and clinical characteristics. RESULTS: Among 24 994 hospital discharges, 6103 (24.4%) were in the morning, 13 786 (55.2%) were in the afternoon, and 5105 (20.4%) were in the evening. The unadjusted 30-day hospital reutilization rates were 14.1% in children discharged in the morning, 18.2% in children discharged in the afternoon, and 19.3% in children discharged in the evening. The adjusted 30-day hospital reutilization rate was lowest in the morning (6.1%, 95% confidence interval [CI] 4.1%-8.2%), followed by afternoon (9.0%, 95% CI 7.0%-11.0%) and evening discharges (10.1%, 95% CI 8.0%-12.3%). Morning discharge had a significantly lower adjusted 30-day all-cause hospital reutilization rate compared with evening discharge (P < .001), whereas afternoon and evening discharges were not significantly different (P = .06). CONCLUSIONS: The adjusted 30-day all-cause hospital reutilization rate was higher for evening discharges compared with morning discharges, whereas the rate was not significantly different between afternoon and evening discharges.

Long-term stable pH sensor array with synergistic bilayer structure for 2D real-time mapping in cell culture monitoring.

Pursuing accurate, swift, and durable pH sensors is important across numerous fields, encompassing healthcare, environmental surveillance, and agriculture. In particular, the emphasis on real-time pH monitoring during cell cultivation has become increasingly pronounced in the current scientific environment-a crucial element being diligently researched to ensure optimal cell production. Both polyaniline (PANi) and iridium oxide (IrOx) show their worth in pH sensing, yet they come with challenges. Single-PANi-layered pH sensors often grapple with diminished sensitivity and lagging responses, while electrodeposited IrOx structures exhibit poor adhesion, leading to their separation from metallic substrates-a trait undesirable for a consistently stable, long-term pH sensor. This paper introduces a bi-layered PANi-IrOx pH sensor, strategically leveraging the advantages of both materials. The results presented here underscore the sensitivity enhancement of binary-phased framework, faster response time, and more robust structure than prior work. Through this synergistic strategy, we demonstrate the potential of integrating different phases to overcome the inherent constraints of individual materials, setting the stage for advanced pH-sensing solutions.

Concordance of esophageal and tracheal temperatures in patients using breathing circuit with heated wire humidifier: A prospective observational study.

RESULTS: After excluding 4 patients with an anesthesia duration of < 2 hours, data from 34 patients (1163 sets of tracheal and esophageal temperatures) were analyzed. Concordance correlation coefficient was 0.78. The overall mean bias (95% limits of agreement) between the tracheal and esophageal temperatures was -0.16°C (-0.65°C to 0.34°C). The percentage of temperature differences within ±â€…0.25°C was 73.5% ± 32.3, with a median of 89.4% [0,100]. The linear mixed-effects model revealed that the estimated intercept was 0.17°C with a 95% confidence interval (CI) of 0.13°C to 0.22°C. The duration of anesthesia and the number of temperature measurements were associated with higher concordance between the tracheal and esophageal temperatures in univariate analysis.

Large-scale smart bioreactor with fully integrated wireless multivariate sensors and electronics for long-term in situ monitoring of stem cell culture.

Achieving large-scale, cost-effective, and reproducible manufacturing of stem cells with the existing devices is challenging. Traditional single-use cell-bag bioreactors, limited by their rigid and single-point sensors, struggle with accuracy and scalability for high-quality cell manufacturing. Here, we introduce a smart bioreactor system that enables multi-spatial sensing for real-time, wireless culture monitoring. This scalable system includes a low-profile, label-free thin-film sensor array and electronics integrated with a flexible cell bag, allowing for simultaneous assessment of culture properties such as pH, dissolved oxygen, glucose, and temperature, to receive real-time feedback for up to 30 days. The experimental results show the accurate monitoring of time-dynamic and spatial variations of stem cells and myoblast cells with adjustable carriers from a plastic dish to a 2-liter cell bag. These advances open up the broad applicability of the smart sensing system for large-scale, lower-cost, reproducible, and high-quality engineered cell manufacturing for broad clinical use.

A predictive model for lymph node metastasis using tumor location in presumed early-stage endometrioid endometrial cancer patients.

OBJECTIVE: The aim of this study was to identify high- and low-risk subgroups of patients with lymph node (LN) metastasis in presumed early-stage endometrioid endometrial cancer (EC) patients. METHODS: Clinicopathologic data of presumed early-stage endometrioid EC patients (n=361) treated with lymphadenectomy between March 2000 and July 2022 were analyzed. None of the patient had definite evidence of LN metastasis in a preoperative magnetic resonance imaging (MRI). A received operating characteristic curve analysis was conducted to define the sensitivity and specificity for the combined preoperative risk factors for LN metastasis, which was determined by multivariate analysis. RESULTS: Nineteen patients (5.3%) had LN metastasis. Multivariate analysis identified cervical stromal invasion on MRI (odds ratio [OR]=4.386; 95% confidence interval [CI]=1.020-18.852; p=0.047), cornual location of tumor on MRI (OR=36.208; 95% CI=7.902-165.913; p<0.001), and lower uterine segment/isthmic location of tumor on MRI (OR=8.454; 95% CI=1.567-45.610; p=0.013) as independent prognostic factors associated with LN metastasis. Patients were categorized into low- and high-risk groups according to risk criteria. Significant differences in the rates of LN metastasis were observed between the two groups (0.4% vs. 22.2%, p<0.001). CONCLUSION: Approximately 95% of presumed early-stage endometrioid EC patients did not have LN metastasis. A model using tumor location was significantly correlated with the risk of LN metastasis. Even in presumed early-stage endometrioid EC patients, therefore, tumor location should be investigated to determine whether to perform LN assessment.

Comparison of Vowel and Sentence Intelligibility in People With Dysarthria Secondary to Amyotrophic Lateral Sclerosis.

PURPOSE: In this study, we examined the utility of vowel intelligibility testing for assessing the impact of dysarthria on speech characteristics in people with amyotrophic lateral sclerosis (ALS). We tested the sensitivity and specificity of overall vowel identification, as well as that of vowel-specific identification, to dysarthria presence and severity. We additionally examined the relationship between vowel intelligibility and sentence intelligibility. METHOD: Twenty-three people with ALS and 22 age- and sex-matched control speakers produced sentences from the Speech Intelligibility Test (SIT), as well as 10 American English monophthongs in /h/-vowel-/d/ words for the vowel intelligibility test (VIT). Data for SIT and VIT scores came from 135 listeners. Diagnostic accuracy of VIT measures was evaluated using the area under the curve of receiver operator characteristics. We then examined differences between control speakers, speakers with mild dysarthria, and speakers with severe dysarthria in their relationship between SIT and VIT scores. RESULTS: The results suggest that the overall vowel intelligibility score showed high sensitivity and specificity in differentiating between speakers with and without dysarthria, even those with milder symptoms. In addition, single-vowel identification scores showed at least acceptable group differentiation between the mild and severe dysarthria groups, though fewer single vowels were acceptable discriminators between the control group and the group with mild dysarthria. Identification accuracy of /ɪ/ in particular showed excellent discrimination across all groups. Examination of the relationship between SIT and VIT scores suggests a severity-specific relationship. Speakers with SIT scores above 70% generally had higher SIT than VIT scores, whereas speakers with SIT below 70% generally had higher VIT than SIT scores. DISCUSSION: Vowel intelligibility testing can detect speech impairments in speakers with mild dysarthria and residual articulatory function in speakers with severe dysarthria. Vowel intelligibility testing may, therefore, be a useful addition to intelligibility testing for individuals with dysarthria.

Multimodal management strategies for chronic pain after spinal surgery: a comprehensive review.

"Chronic pain after spinal surgery" (CPSS) is a nonspecific term for cases in which the end result of surgery generally does not meet the preoperative expectations of the patient and surgeon. This term has replaced the previous term i.e., failed back surgery syndrome. CPSS is challenging for both patients and doctors. Despite advancements in surgical techniques and technologies, a subset of patients continue to experience persistent or recurrent pain postoperatively. This review provides an overview of the multimodal management for CPSS, ranging from conservative management to revision surgery. Drawing on recent research and clinical experience, we aimed to offer insights into the diverse strategies available to improve the quality of life of CPSS patients.

Vutiglabridin Alleviates Cellular Senescence with Metabolic Regulation and Circadian Clock in Human Dermal Fibroblasts.

The process of cellular senescence, which is characterized by stable cell cycle arrest, is strongly associated with dysfunctional cellular metabolism and circadian rhythmicity, both of which are reported to result from and also be causal to cellular senescence. As a result, modifying any of them-senescence, metabolism, or the circadian clock-may affect all three simultaneously. Obesity accelerates aging by disrupting the homeostasis of reactive oxygen species (ROS) via an increased mitochondrial burden of fatty acid oxidation. As a result, if senescence, metabolism, and circadian rhythm are all linked, anti-obesity treatments may improve metabolic regulation while also alleviating senescence and circadian rhythm. Vutiglabridin is a small molecule in clinical trials that improves obesity by enhancing mitochondrial function. We found that chronic treatment of senescent primary human dermal fibroblasts (HDFs) with vutiglabridin alleviates all investigated markers of cellular senescence (SA-ß-gal, CDKN1A, CDKN2A) and dysfunctional cellular circadian rhythm (BMAL1) while remarkably preventing the alterations of mitochondrial function and structure that occur during the process of cellular senescence. Our results demonstrate the significant senescence-alleviating effects of vutiglabridin, specifically with the restoration of cellular circadian rhythmicity and metabolic regulation. These data support the potential development of vutiglabridin against aging-associated diseases and corroborate the intricate link between cellular senescence, metabolism, and the circadian clock.

Microbial dysbiosis index for assessing colitis status in mouse models: A systematic review and meta-analysis.

Although countless gut microbiome studies on colitis using mouse models have been carried out, experiments with small sample sizes have encountered reproducibility limitations because of batch effects and statistical errors. In this study, dextran-sodium-sulfate-induced microbial dysbiosis index (DiMDI) was introduced as a reliable dysbiosis index that can be used to assess the state of microbial dysbiosis in DSS-induced mouse models. Meta-analysis of 189 datasets from 11 independent studies was performed to construct the DiMDI. Microbial dysbiosis biomarkers, Muribaculaceae, Alistipes, Turicibacter, and Bacteroides, were selected through four different feature selection methods and used to construct the DiMDI. This index demonstrated a high accuracy of 82.3% and showed strong robustness (88.9%) in the independent cohort. Therefore, DiMDI may be used as a standard for assessing microbial imbalance in DSS-induced mouse models and may contribute to the development of reliable colitis microbiome studies in mouse experiments.

Is prophylactic intraoperative transfusion needed in unilateral total knee arthroplasty? Comparison of hematologic data and postoperative transfusion rate between a prophylactic allogenic or autologous transfusion group with a no-transfusion group: A preliminary retrospective cohort study.

OBJECTIVES: To determine whether prophylactic intra-operative allogenic or autologous transfusion could prevent postoperative anemia and additional transfusion comparing to the control group without receiving any prophylactic intervention in unilateral total knee arthroplasty. MATERIALS AND METHODS: This study included 711 patients who underwent unilateral TKA. They were divided into four groups: allogeneic transfusion group (group AL), autologous transfusion group (group AT), tranexamic acid group (group TA), and control group (group C). The primary outcome was rate of postoperative allogeneic blood transfusions. Secondary outcomes were postoperative hemoglobin and hematocrit levels, postoperative bleeding amount. RESULTS: Groups AT and AL did not exhibit a significant reduction in postoperative allogenic blood transfusion rate compared to group C (28/108 vs. 20/108, p = 0.21 and 37/159 vs. 34/159, p = 0.78 respectively). However, group TA demonstrated a significantly lower rate of postoperative allogenic blood transfusions than group C (22/125 vs. 3/125, p = 0.0001). Postoperative hemoglobin and hematocrit levels were statistically higher in group TA than in group C. However, those levels in group AT and AL did not differ significantly from those of group C. CONCLUSION: Intra-operative prophylactic transfusions did not decrease postoperative anemia or additional postoperative transfusion compared to the control group in patients undergoing total knee arthroplasty. However, the group receiving tranexamic acid showed lower transfusion rate and higher levels of hemoglobin and hematocrit.

Use of oxygen reserve index during bronchoscopic balloon dilation for subglottic stenosis in a patient with left ventricular assist device implantation -a case report.

BACKGROUND: Monitoring the oxygenation status is crucial during general anesthesia to ensure patient safety. Although noninvasive pulse oximetry is commonly used to monitor percutaneous oxygen saturation (SpO2), it may not accurately reflect changes in oxygen partial pressure when the latter is excessively high or low. The oxygen reserve index (ORi) provides real-time information about the oxygen reserve status. CASE: We present a case of successful management of subglottic stenosis using balloon bronchoscopy in an infant with a left ventricular assist device implantation under ORi monitoring to predict hypoxemia during the surgical procedure. CONCLUSIONS: Utilizing ORi monitoring during anesthesia for procedures involving apnea in critically ill infants can help predict impending desaturation before a drop in SpO2 occurs, allowing anesthesiologists to effectively anticipate and manage the apnea period. Continuous ORi monitoring offers valuable insights during surgical procedures, especially in infants with compromised respiratory and cardiovascular functions.

Segmentectomy quality remains important in ground-glass-dominant stage I lung cancer.

BACKGROUND: Segmentectomy for early-stage lung cancer has benefits for survival and parenchymal preservation. However, segmentectomies are technically challenging, thereby resulting in considerable variability in the quality of resection. In this study, we aimed to review the quality of segmentectomies and analyze their clinical impact. METHODS: This retrospective study reviewed patients diagnosed with stage I lung cancer after segmentectomies between 2013 and 2021. Segmentectomies were classified as anatomical or nonanatomical; anatomical resection included segmental bronchus and vessel (artery and/or vein) divisions; others were classified as nonanatomical. The primary outcome was recurrence-free and overall survival, and the secondary outcome was postoperative spirometry and lung plication, which is seen as a fibrotic line along the stapling site. RESULTS: Of the 132 segmental resections included in this study, 101 (76.5%) were anatomical segmentectomies. The median consolidation-tumor ratio was 0.40, and 83.3% (110/132) had ground-glass opacities (GGOs). Compared to nonanatomical resections, more N1 and total lymph node stations were retrieved after anatomical segmentectomies. Regarding clinical outcomes, recurrence-free survival was better after anatomical segmentectomy (p = 0.049); however, overall survival was not significantly different (p = 0.064). Furthermore, at 3-6 months postoperatively, thicker lung plication at the stapling site was observed in nonanatomical resections (p < 0.001). Subgroup analysis for complex segmentectomies revealed a larger decrease in forced-expiration volume in 1 s after nonanatomical resection. CONCLUSION: Anatomical segmentectomy resulted in better survival and a lower incidence of thick lung plication, even in GGO-dominant tumors. Therefore, further standardization and quality management of segmentectomy procedures will improve the clinical outcomes.

Evaluation of photopolymer resins for dental prosthetics fabricated via the stereolithography process at different polymerization temperatures. Part II: Dimensional accuracy and fracture load of fixed dental prostheses.

STATEMENT OF PROBLEM: Prostheses printed on a 3-dimensional (3D) printer need to undergo the postpolymerization process, which can increase the working time. However, it has been not suggested for reducing workload and improving the properties of prostheses in dental clinical practice. PURPOSE: The purpose of this in vitro study was to evaluate how the printing temperature impacts the dimensional accuracy and fracture load of 3D printed fixed dental prostheses (FDPs). MATERIAL AND METHODS: Dental prostheses were printed at room temperature (RT), 50°C, and 70°C using a stereolithography 3D printer. Subsequently, after rinsing away residual monomer, the printed parts underwent the green condition (it was not subjected to any postprocessing) and postpolymerization. The mechanical properties of the printed FDPs were determined by loading to fracture (n=6). To evaluate their clinical applicability, the dimensional accuracy and fit of FDPs fabricated at various resin polymerization temperatures were measured (n=6). The 1-way analysis of variance was used to perform statistical comparisons, followed by the Tukey honestly significant difference test (α=.05). RESULTS: The specimens printed at RT and 50°C were better than those printed at 70°C in terms of dimensional accuracy and fit (P<.05). Nonetheless, the dimensional accuracy and fit of the specimens printed at 70°C were clinically acceptable. The fracture load of the 3-unit FDPs depended significantly on the printing temperature. CONCLUSIONS: The dimensional accuracy and fracture load of the 70°C group were acceptable for FDP fabrication. Thus, the temperature of 70°C without postprocessing may help make the procedure more efficient.

Evaluation of photopolymer resins for dental prosthetics fabricated via the stereolithography process at different polymerization temperatures-Part I: Conversion rate and mechanical properties.

STATEMENT OF PROBLEM: Improvement in the mechanical properties of 3-dimensional (3D) printed dental prostheses is necessary to prevent wear caused by an antagonist or fracture. However, how different printing temperatures affect their mechanical properties is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the mechanical properties of 3D printed parts fabricated at different printing temperatures. MATERIAL AND METHODS: Photopolymer specimens were fabricated at 3 different temperatures (room temperature, 50 °C, and 70 °C) using a stereolithography 3D printer. After rinsing to remove the residual monomer, the specimens were divided into 2 groups: with or without postprocessing. The viscosity of the photopolymerization resin was measured while the temperature was increased. Furthermore, the double-bond conversion (DBC) of the printed part was evaluated (n=3). Mechanical properties were investigated via dynamic mechanical analysis (n=1) and tensile testing (n=5). Statistical comparisons were performed via 1-way analysis of variance, followed by the Tukey honestly significant difference test (α=.05). RESULTS: The DBC rates of the green condition group increased from 66.67% to 86.33% with increasing temperature. In addition, these specimens exhibited improved mechanical properties and reduced residual monomer levels. CONCLUSIONS: Specimens fabricated at a temperature of 70 °C exhibited mechanical properties suitable for clinical application.