RESUMEN
This study proposes a variable-stiffness mechanism for non-pneumatic tires such that can actively adapt to various environments. Non-pneumatic tire is a compliant wheel structure that offers superior robustness and adaptability compared to pneumatic tires. However, the tire designed for certain terrain exhibits relatively high rolling resistance and inadequate suspension. To address these problems, a stiffness-adjustable wheel (SAW) that can modify the force applied to the contact surface is introduced in this study. In addition, the shape of SAW is optimized to maintain a desirable range of stiffness under different conditions. The optimization is conducted with experimental method, because nonlinear response of material and interference between components make it difficult to predict the characteristic of the wheel at large deformation. The SAW has potential for application in various mobile platforms to provide adequate stiffness for a variety of terrains and driving conditions.
RESUMEN
Generation of water as a byproduct in chemical reactions is often detrimental because it lowers the yield of the target product. Although several water removal methods, using absorbents, inorganic membranes, and additional dehydration reactions, have been proposed, there is an increasing demand for a stable and simple system that can selectively remove water over a wide range of reaction temperatures. Herein we report a thermally rearranged polybenzoxazole hollow fiber membrane with good water permselectivity and stability at reaction temperatures of up to 400 °C. Common reaction engineering challenges, such as those due to equilibrium limits, catalyst deactivation, and water-based side reactions, have been addressed using this membrane in a reactor.
RESUMEN
Among various H2 purification technologies, the use of membrane technology has been considered an ecofriendly approach for addressing the increasing hydrogen demand. Although many H2-selective membrane materials have been reported, processing them into hollow fibers or thin-film composites (TFCs) via traditional methods either affects the performance of the materials or renders their further processing into applicable membrane forms infeasible. Herein, we propose a water-casting method for fabricating TFC membranes for hydrogen purification with high permselectivity. The film integrity and thickness were manipulated by controlling the spreadability of the casting solution, and the resultant water-cast TFC membrane that comprised an â¼30 nm selective layer demonstrated high H2 permeance and H2/CH4 selectivity of approximately 190 GPU and 100, respectively, under optimized conditions. We performed a mixed-gas permeation test using a simulated off-gas of steam-methane reforming from natural gas in a single-stage system and obtained hydrogen gas of >99 mol % purity. This indicates not only the suitability of the water-cast membranes for satisfying the demand for pure hydrogen as a fuel and chemical reagent but also the great potential of the water-casting method for high-performance membranes in various industrial and environmental applications.
RESUMEN
OBJECTIVE: Adrenocorticotropic hormone (ACTH) and ß-endorphin are pituitary neuro-peptides released by acute stress. We determined why the prognosis of patients with subarachnoid hemorrhages (SAH) due to aneurysmal rupture is not always dependent on the Hunt-Hess grading system (HHS) and delta-National Institutes of Health Stroke Scale (NIHSS), while studying endogenous neuropeptides, including ACTH and ß-endorphin. METHODS: We analyzed blood samples collected from patients with SAH (SAH group; n=37) and those with unruptured intracranial aneurysms (control group; n=37). Blood sampling was performed before any procedure or chemical agents administration. The results of ACTH and ß-endorphin measurements were compared using the delta-NIHSS and HHS. The data were analyzed using descriptive statistics, independent samples t-tests, and Pearson's correlations. RESULTS: Of the 18 patients with low-grade HHS, 13 had low delta-NIHSS and five showed high delta-NIHSS. Of the 19 patients with high-grade HHS, the delta-NIHSS was ≥14 in the other five patients. ACTH concentration was high (497.3 pg/mL) in five patients with high-grade HHS and high delta-NIHSS. ß-endorphin concentration was high (159.7 pg/mL) in 13 patients with low-grade HHS and low delta-NIHSS. CONCLUSIONS: High ACTH levels in patients with massive bleeding and poor neurological status suggests increasing ACTH secretion in response to bleeding stress, which may aggravate neurological status. Contrary to ACTH, high ß-endorphin levels in patients with low-grade HHS implied the involvement of additional factors in predicting fair outcomes related to low delta-NIHSS. These results may provide insight into the varying prognostic potential of HHS in SAH patients.
RESUMEN
In membrane-based separation, molecular size differences relative to membrane pore sizes govern mass flux and separation efficiency. In applications requiring complex molecular differentiation, such as in natural gas processing, cascaded pore size distributions in membranes allow different permeate molecules to be separated without a reduction in throughput. Here, we report the decoration of microporous polymer membrane surfaces with molecular fluorine. Molecular fluorine penetrates through the microporous interface and reacts with rigid polymeric backbones, resulting in membrane micropores with multimodal pore size distributions. The fluorine acts as angstrom-scale apertures that can be controlled for molecular transport. We achieved a highly effective gas separation performance in several industrially relevant hollow-fibrous modular platform with stable responses over 1 year.
