Evaluation of Human Platelet Lysate as an Alternative to Fetal Bovine Serum for Potential Clinical Applications of Stem Cells from Human Exfoliated Deciduous Teeth.

In recent years, there has been a surge in demand for and research focus on cell therapy, driven by the tissue-regenerative and disease-treating potentials of stem cells. Among the candidates, dental pulp stem cells (DPSCs) or human exfoliated deciduous teeth (SHED) have garnered significant attention due to their easy accessibility (non-invasive), multi-lineage differentiation capability (especially neurogenesis), and low immunogenicity. Utilizing these stem cells for clinical purposes requires careful culture techniques such as excluding animal-derived supplements. Human platelet lysate (hPL) has emerged as a safer alternative to fetal bovine serum (FBS) for cell culture. In our study, we assessed the impact of hPL as a growth factor supplement for culture medium, also conducting a characterization of SHED cultured in hPL-supplemented medium (hPL-SHED). The results showed that hPL has effects in enhancing cell proliferation and migration and increasing cell survivability in oxidative stress conditions induced by H2O2. The morphology of hPL-SHED exhibited reduced size and elongation, with a differentiation capacity comparable to or even exceeding that of SHED cultured in a medium supplemented with fetal bovine serum (FBS-SHED). Moreover, no evidence of chromosome abnormalities or tumor formation was detected. In conclusion, hPL-SHED emerges as a promising candidate for cell therapy, exhibiting considerable potential for clinical investigation.

Utilization of systematic error-assessment software to improve phylogenetic accuracy.

Unlike classical systems based on the use of morphological data, modern phylogenetic analyses use genetic information to construct phylogenetic trees. Ongoing research in the field of phylogenetics is evaluating the accuracy of phylogenetic estimation results and the reliability of phylogenetic trees to explain evolutionary relationships. Recently, the probability of stochastic errors in large-scale phylogenetic datasets has decreased, while the probability of systematic errors has increased. Therefore, before constructing a phylogenetic tree, it is necessary to assess the causes of systematic bias to improve the accuracy of phylogenetic estimates. We performed analyses of three datasets (Terebelliformia, Daphniid, and Glires clades) using bioinformatics software to assess systematic error and improve phylogenetic tree accuracy. Then, we proposed a combination of systematic biases capable of discerning the most suitable gene markers within a series of taxa and generating conflicting phylogenetic topologies. Our findings will help improve the reliability of phylogenetic software to estimate phylogenies more accurately by exploiting systematic bias.

Three Dimensional Porous Binary Composites of Collagen, Elastin and Fibrin Proteins Orchestrate Adipose Tissue Regeneration.

The development of an optimal healthcare biomaterial for targeted tissue regeneration poses a significant challenge. Our current objective is to advance the development of a specialised biomaterial that can effectively facilitate the regeneration of adipose tissue. In prior studies, the assessment of collagen, elastin, and fibrin unary scaffolds has been conducted. However, it is important to note that native adipose tissue is comprised of a diverse array of extracellular matrix (ECM) constituents. To mimic this behaviour we fabricated binary compositions of collagen, elastin, and fibrin in a 1:1 ratio, resulting in the formation of Col/Ela, Col/Fib, and Ela/Fib composites through a customised fabrication procedure. The physical properties of these scaffolds were comprehensively analysed using a range of material characterisation techniques. Additionally, the biological properties of the scaffolds were investigated by examining the survival, proliferation, and phenotype of adipose-derived stem cells. Subsequently, the aforementioned binary scaffolds were introduced into a live rodent model for a duration of 28 days. Following this period, the explants were subjected to analysis through X-ray microtomography, histology, and immunohistochemistry in order to evaluate their immunocompatibility, integration, and adipogenesis. The findings of the study demonstrated that the utilisation of binary combinations of Col/Ela, Col/Fib, and Ela/Fib had a discernible impact on the physical and biological characteristics of the scaffolds. Nevertheless, Ela/Fib exhibited characteristics that made it a suitable candidate for adipogenesis due to its notable upregulation of caveolin-1 expression in both acellular and cellular cohorts. The combination of two natural polymers in this cell-material interaction has significantly enhanced our comprehension of adipogenesis. This article is protected by copyright. All rights reserved.

Long-term Outcomes of Ampullary Adenoma According to Resected Margin Status after Endoscopic Papillectomy.

Background/Aims: : Endoscopic papillectomy (EP) is increasingly used as an alternative to surgery for managing benign ampullary neoplasms. However, post-EP resection margins are often positive or indeterminate, and there is no consensus on the management of ampullary adenomas with positive or indeterminate margins after EP. This study was designed to compare the long-term outcomes between resected margin-negative (RMN) and resected margin-positive/indeterminate (RMPI) groups and to identify factors associated with clinical outcomes. Methods: : This retrospective analysis included patients with ampullary adenoma without evidence of adenocarcinoma who underwent EP between 2004 and 2016. The RMN and RMPI groups were compared for recurrence rates and recurrence-free duration during a mean follow-up duration of 71.7±39.8 months. Factors related to clinical outcomes were identified using multivariate analysis. Results: : Of the 129 patients who underwent EP, 82 were in the RMN group and 47 were in the RMPI group. The RMPI group exhibited a higher recurrence rate compared to the RMN group (14.6% vs 34.0%, p=0.019). However, the recurrence-free duration was not significantly different between the groups (34.7±32.6 months vs 36.2±27.4 months, p=0.900). Endoscopic treatment successfully managed recurrence in both groups (75% vs 75%). Submucosal injection was a significant risk factor for residual lesions (hazard ratio, 4.11; p=0.009) and recurrence (hazard ratio, 2.57; p=0.021). Conclusions: : Although ampullary adenomas with positive or indeterminate margins after EP showed a higher rate of recurrence at long-term follow-up, endoscopic treatment was effective with favorable long-term outcomes. Submucosal injection prior to resection was associated with increased risk of recurrence and residual lesions.

Cyclic stretch induced epigenetic activation of periodontal ligament cells.

Periodontal ligament (PDL) cells play a crucial role in maintaining periodontal integrity and function by providing cell sources for ligament regeneration. While biophysical stimulation is known to regulate cell behaviors and functions, its impact on epigenetics of PDL cells has not yet been elucidated. Here, we aimed to investigate the cytoskeletal changes, epigenetic modifications, and lineage commitment of PDL cells following the application of stretch stimuli to PDL. PDL cells were subjected to stretching (0.1 Hz, 10 %). Subsequently, changes in focal adhesion, tubulin, and histone modification were observed. The survival ability in inflammatory conditions was also evaluated. Furthermore, using a rat hypo-occlusion model, we verified whether these phenomena are observed in vivo. Stretched PDL cells showed maximal histone 3 acetylation (H3Ace) at 2 h, aligning perpendicularly to the stretch direction. RNA sequencing revealed stretching altered gene sets related to mechanotransduction, histone modification, reactive oxygen species (ROS) metabolism, and differentiation. We further found that anchorage, cell elongation, and actin/microtubule acetylation were highly upregulated with mechanosensitive chromatin remodelers such as H3Ace and histone H3 trimethyl lysine 9 (H3K9me3) adopting euchromatin status. Inhibitor studies showed mechanotransduction-mediated chromatin modification alters PDL cells behaviors. Stretched PDL cells displayed enhanced survival against bacterial toxin (C12-HSL) or ROS (H2O2) attack. Furthermore, cyclic stretch priming enhanced the osteoclast and osteoblast differentiation potential of PDL cells, as evidenced by upregulation of lineage-specific genes. In vivo, PDL cells from normally loaded teeth displayed an elongated morphology and higher levels of H3Ace compared to PDL cells with hypo-occlusion, where mechanical stimulus is removed. Overall, these data strongly link external physical forces to subsequent mechanotransduction and epigenetic changes, impacting gene expression and multiple cellular behaviors, providing important implications in cell biology and tissue regeneration.

Hierarchically porous surface of HA-sandblasted Ti implant screw using the plasma electrolytic oxidation: Physical characterization and biological responses.

The surface topological features of bioimplants are among the key indicators for bone tissue replacement because they directly affect cell morphology, adhesion, proliferation, and differentiation. In this study, we investigated the physical, electrochemical, and biological responses of sandblasted titanium (SB-Ti) surfaces with pore geometries fabricated using a plasma electrolytic oxidation (PEO) process. The PEO treatment was conducted at an applied voltage of 280 V in a solution bath consisting of 0.15 mol L-1 calcium acetate monohydrate and 0.02 mol L-1 calcium glycerophosphate for 3 min. The surface chemistry, wettability, mechanical properties and corrosion behavior of PEO-treated sandblasted Ti implants using hydroxyapatite particles (PEO-SB-Ti) were improved with the distribution of calcium phosphorous porous oxide layers, and showed a homogeneous and hierarchically porous surface with clusters of nanopores in a bath containing calcium acetate monohydrate and calcium glycerophosphate. To demonstrate the efficacy of PEO-SB-Ti, we investigated whether the implant affects biological responses. The proposed PEO-SB-Ti were evaluated with the aim of obtaining a multifunctional bone replacement model that could efficiently induce osteogenic differentiation as well as antibacterial activities. These physical and biological responses suggest that the PEO-SB-Ti may have a great potential for use an artificial bone replacement compared to that of the controls.

Development of an Injectable Biphasic Hyaluronic Acid-Based Hydrogel With Stress Relaxation Properties for Cartilage Regeneration.

Biomimetic stress-relaxing hydrogels with reversible crosslinks attract significant attention for stem cell tissue regeneration compared with elastic hydrogels. However, stress-relaxing hyaluronic acid (HA)-based hydrogels fabricated using conventional technologies lack stability, biocompatibility, and mechanical tunability. Here, it is aimed to address these challenges by incorporating calcium or phosphate components into the HA backbone, which allows reversible crosslinking of HA with alginate to form interpenetrating networks, offering stability and mechanical tunability for mimicking cartilage. Diverse stress-relaxing hydrogels (τ1/2; SR50, 60-2000 s) are successfully prepared at ≈3 kPa stiffness with self-healing and shear-thinning abilities, favoring hydrogel injection. In vitro cell experiments with RNA sequencing analysis demonstrate that hydrogels tune chondrogenesis in a biphasic manner (hyaline or calcified) depending on the stress-relaxation properties and phosphate components. In vivo studies confirm the potential for biphasic chondrogenesis. These results indicate that the proposed stress-relaxing HA-based hydrogel with biphasic chondrogenesis (hyaline or calcified) is a promising material for cartilage regeneration.

Strontium/Silicon/Calcium-Releasing Hierarchically Structured 3D-Printed Scaffolds Accelerate Osteochondral Defect Repair.

Articular cartilage defects are a global challenge, causing substantial disability. Repairing large defects is problematic, often exceeding cartilage's self-healing capacity and damaging bone structures. To tackle this problem, a scaffold-mediated therapeutic ion delivery system is developed. These scaffolds are constructed from poly(ε-caprolactone) and strontium (Sr)-doped bioactive nanoglasses (SrBGn), creating a unique hierarchical structure featuring macropores from 3D printing, micropores, and nanotopologies due to SrBGn integration. The SrBGn-embedded scaffolds (SrBGn-µCh) release Sr, silicon (Si), and calcium (Ca) ions, which improve chondrocyte activation, adhesion, proliferation, and maturation-related gene expression. This multiple ion delivery significantly affects metabolic activity and maturation of chondrocytes. Importantly, Sr ions may play a role in chondrocyte regulation through the Notch signaling pathway. Notably, the scaffold's structure and topological cues expedite the recruitment, adhesion, spreading, and proliferation of chondrocytes and bone marrow-derived mesenchymal stem cells. Si and Ca ions accelerate osteogenic differentiation and blood vessel formation, while Sr ions enhance the polarization of M2 macrophages. The findings show that SrBGn-µCh scaffolds accelerate osteochondral defect repair by delivering multiple ions and providing structural/topological cues, ultimately supporting host cell functions and defect healing. This scaffold holds great promise for osteochondral repair applications.

Complementary Therapeutic Effect of Fecal Microbiota Transplantation in Ulcerative Colitis after the Response to Anti-Tumor Necrosis Factor Alpha Agent Was Lost: A Case Report.

In patients with ulcerative colitis (UC), the development of an antidrug antibody (ADA) to anti-tumor necrosis factor (TNF)α agent is a crucial problem which aggravates the clinical course of the disease, being cited as one of the most common causes for discontinuing anti-TNFα treatment. This is due to ADA eventually causing secondary LOR, leading to discontinuation of anti-TNFα treatment. Recently, research on the microbiome and relationship between worsening UC and dysbiosis has been conducted. Further, investigations on the association between the microbiome and secondary LOR are increasing. Here, we present the therapeutic effect of fecal microbiota transplantation (FMT) on a 42-year-old man with secondary LOR and high ADA levels. FMT has recently been used for the treatment of, and for overcoming, drug resistance through microbiome modification. Stool samples were collected from the patient before and 4 weeks after FMT. Symptoms, including hematochezia and Mayo endoscopy sub-scores, improved after FMT, while ADA levels decreased by one-third to less than half the value (29 ng/mL) compared to before FMT (79 ng/mL). Additionally, the trough level of infliximab became measurable, which reflects the improvement in the area under the concentration (AUC). Butyricicoccus, Faecalibacterium, Bifidobacterium, Ligilactobacillus, Alistipes, and Odoribacter, which regulate immune responses and alleviate inflammation, also increased after FMT. We report a case in which microbiome modification by FMT increased the AUC of anti-TNFα in a patient who developed secondary LOR during anti-TNFα treatment, thereby improving symptoms and mucosal inflammation.

Surface-Engineered Titanium with Nanoceria to Enhance Soft Tissue Integration Via Reactive Oxygen Species Modulation and Nanotopographical Sensing.

The design of implantable biomaterials involves precise tuning of surface features because the early cellular fate on such engineered surfaces is highly influenced by many physicochemical factors [roughness, hydrophilicity, reactive oxygen species (ROS) responsiveness, etc.]. Herein, to enhance soft tissue integration for successful implantation, Ti substrates decorated with uniform layers of nanoceria (Ce), called Ti@Ce, were optimally developed by a simple and cost-effective in situ immersion coating technique. The characterization of Ti@Ce shows a uniform Ce distribution with enhanced roughness (∼3-fold increase) and hydrophilicity (∼4-fold increase) and adopted ROS-scavenging capacity by nanoceria coating. When human gingival fibroblasts were seeded on Ti@Ce under oxidative stress conditions, Ti@Ce supported cellular adhesion, spreading, and survivability by its cellular ROS-scavenging capacity. Mechanistically, the unique nanocoating resulted in higher expression of amphiphysin (a nanotopology sensor), paxillin (a focal adhesion protein), and cell adhesive proteins (collagen-1 and fibronectin). Ti@Ce also led to global chromatin condensation by decreasing histone 3 acetylation as an early differentiation feature. Transcriptome analysis by RNA sequencing confirmed the chromatin remodeling, antiapoptosis, antioxidant, cell adhesion, and TGF-ß signaling-related gene signatures in Ti@Ce. As key fibroblast transcription (co)factors, Ti@Ce promotes serum response factor and MRTF-α nucleus localization. Considering all of this, it is proposed that the surface engineering approach using Ce could improve the biological properties of Ti implants, supporting their functioning at soft tissue interfaces and utilization as a bioactive implant for clinical conditions such as peri-implantitis.

Mechanophysical and Anti-Adhesive Properties of a Nanoclay-Containing PMMA Denture Resin.

Poly(methyl methacrylate) (PMMA) is commonly used for dental dentures, but it has the drawback of promoting oral health risks due to oral bacterial adhesion. Recently, various nanoparticles have been incorporated into PMMA to tackle these issues. This study aims to investigate the mechanophysical and antimicrobial adhesive properties of a denture resin by incorporating of nanoclay into PMMA. Specimens were prepared by adding 0, 1, 2, and 4 wt % surface-modified nanoclay (Sigma) to self-polymerizing PMMA denture resin. These specimens were then evaluated using FTIR, TGA/DTG, and FE-SEM with EDS. Various mechanical and surface physical properties, including nanoindentation, were measured and compared with those of pure PMMA. Antiadhesion experiments were conducted by applying a Candida albicans (ATCC 11006) suspension to the surface of the specimens. The antiadhesion activity of C. albicans was confirmed through a yeast-wall component (mannan) and mRNA-seq analysis. The bulk mechanical properties of nanoclay-PMMA composites were decreased compared to those of pure PMMA, while the flexural strength and modulus met the ISO 20795-1 requirement. However, there were no significant differences in the nanoindentation hardness and elastic modulus. The surface energy revealed a significant decrease at 4 wt % nanoclay-PMMA. The antiadhesion effect of Candida albicans was evident along with nanoclay content in the nanocomposites and confirmed by the reduced attachment of mannan on nanoclay-PMMA composites. mRNA-seq analysis supported overall transcriptome changes in altering attachment and metabolism behaviors on the surface. The nanoclay-PMMA materials showed a lower surface energy as the content increased, leading to an antiadhesion effect against Candida albicans. These findings indicate that incorporating nanoclay into PMMA surfaces could be a valuable strategy for preventing the fungal biofilm formation of denture base materials.

Severe Liver Dysfunction after Donor Lymphocyte Infusion for Relapsed Multiple Myeloma.

Donor lymphocyte infusion (DLI) is performed to augment an anti-tumor immune response or ensure donor stem cells remain engrafted following allogeneic stem cell transplantation but may induce graft-versus-host disease (GVHD) involving skin, intestine, and liver. Although hepatic involvement of GVHD can manifest as mild to severe hepatitis, few reports have mentioned acute severe liver dysfunction with encephalopathy. We experienced a case of acute severe liver dysfunction with semicoma after DLI in a patient with relapsed multiple myeloma following allogeneic stem cell transplantation, in whom chronic viral hepatitis B had been suppressed by antiviral treatment. The patient recovered after high-dose glucocorticoid administration based on an assessment of hepatic GVHD. Clinicians should be aware of the possibility of this catastrophic hepatic complication after DLI in hematologic disorders.

Targeting Nuclear Mechanics Mitigates the Fibroblast Invasiveness in Pathological Dermal Scars Induced by Matrix Stiffening.

Pathological dermal scars such as keloids present significant clinical challenges lacking effective treatment options. Given the distinctive feature of highly stiffened scar tissues, deciphering how matrix mechanics regulate pathological progression can inform new therapeutic strategies. Here, it is shown that pathological dermal scar keloid fibroblasts display unique metamorphoses to stiffened matrix. Compared to normal fibroblasts, keloid fibroblasts show high sensitivity to stiffness rather than biochemical stimulation, activating cytoskeletal-to-nuclear mechanosensing molecules. Notably, keloid fibroblasts on stiff matrices exhibit nuclear softening, concomitant with reduced lamin A/C expression, and disrupted anchoring of lamina-associated chromatin. This nuclear softening, combined with weak adhesion and high contractility, facilitates the invasive migration of keloid fibroblasts through confining matrices. Inhibiting lamin A/C-driven nuclear softening, via lamin A/C overexpression or actin disruption, mitigates such invasiveness of keloid fibroblasts. These findings highlight the significance of the nuclear mechanics of keloid fibroblasts in scar pathogenesis and propose lamin A/C as a potential therapeutic target for managing pathological scars.

Nanozyme-Engineered Hydrogels for Anti-Inflammation and Skin Regeneration.

Inflammatory skin disorders can cause chronic scarring and functional impairments, posing a significant burden on patients and the healthcare system. Conventional therapies, such as corticosteroids and nonsteroidal anti-inflammatory drugs, are limited in efficacy and associated with adverse effects. Recently, nanozyme (NZ)-based hydrogels have shown great promise in addressing these challenges. NZ-based hydrogels possess unique therapeutic abilities by combining the therapeutic benefits of redox nanomaterials with enzymatic activity and the water-retaining capacity of hydrogels. The multifaceted therapeutic effects of these hydrogels include scavenging reactive oxygen species and other inflammatory mediators modulating immune responses toward a pro-regenerative environment and enhancing regenerative potential by triggering cell migration and differentiation. This review highlights the current state of the art in NZ-engineered hydrogels (NZ@hydrogels) for anti-inflammatory and skin regeneration applications. It also discusses the underlying chemo-mechano-biological mechanisms behind their effectiveness. Additionally, the challenges and future directions in this ground, particularly their clinical translation, are addressed. The insights provided in this review can aid in the design and engineering of novel NZ-based hydrogels, offering new possibilities for targeted and personalized skin-care therapies.

Effect of altered gene expression in lipid metabolism on cognitive improvement in patients with Alzheimer's dementia following fecal microbiota transplantation: a preliminary study.

Background: The brain-gut axis has emerged as a potential target in neurodegenerative diseases, including dementia, as individuals with dementia exhibit distinct gut microbiota compositions. Fecal microbiota transplantation (FMT), the transfer of fecal solution from a healthy donor to a patient, has shown promise in restoring homeostasis and cognitive enhancement. Objective: This study aimed to explore the effects of FMT on specific cognitive performance measures in Alzheimer's dementia (AD) patients and investigate the relationship between cognition and the gut microbiota by evaluating changes in gene expression following FMT. Methods: Five AD patients underwent FMT, and their cognitive function [Mini-Mental State Examination (MMSE), Montreal Cognitive Assessment (MoCA), and Clinical Dementia Rating Scale Sum of Boxes (CDR-SOB)] was assessed before and after FMT. The patients' fecal samples were analyzed with 16S rRNA to compare the composition of their gut microbiota. We also assessed modifications in the serum mRNA expression of patients' genes related to lipid metabolism using serum RNA sequencing and quantitative real-time polymerase chain reaction. Results: Significant improvements in cognitive function, as measured by the MMSE (pre- and post-FMT was 13.00 and 18.00) and MoCA were seen. The MoCA scores at 3 months post-FMT (21.0) were the highest (12.0). The CDR-SOB scores at pre- and post-FMT were 10.00 and 5.50, respectively. Analysis of the gut microbiome composition revealed changes via 16S rRNA sequencing with an increase in Bacteroidaceae and a decrease in Enterococcaceae. Gene expression analysis identified alterations in lipid metabolism-related genes after FMT. Conclusion: These findings suggest a link between alterations in the gut microbiome, gene expression related to lipid metabolism, and cognitive function. The study highlights the importance of gut microbiota in cognitive function and provides insights into potential biomarkers for cognitive decline progression. FMT could complement existing therapies and show potential as a therapeutic intervention to mitigate cognitive decline in AD.

Effect of lyophilized gelatin-norbornene cryogel size on calvarial bone regeneration.

Molding processes with molds containing topographical structures have been used for fabrication of hydrogel and cryogel particles. However, they can involve difficulties in separation of fabricated particles with complex shape from the molds or repeated fabrication of the particles although the overall processes do not require much skill and equipment. In this study, molds with etched superhydrophobic patterns have been developed by etching polytetrafluoroethylene (PTFE) blocks in user-defined designs with a femtosecond (FS) laser-based etching system. Lyophilized cryogel particles with various designs and sizes were fabricated by molding precursors with these PTFE molds. Additionally, the clean and easy separation of particles from the molds allowed repeated fabrication of the particles. For an application, relatively 'big' gelatin-norbornene (GelNB) cryogel particles prepared via molding with polydimethylsiloxane (PDMS) molds, swelling in phosphate buffered saline (PBS) and slicing height in half and 'small' GelNB cryogel particles fabricated with the PTFE molds were fabricated. Then, they were used to study scaffold size effect on calvarial bone regeneration. The molds generated with the FS laser-based etching system can be useful for various applications that require the mass production of cryogel particles in various geometries.

Role of Probiotics in Preventing Carbapenem-Resistant Enterobacteriaceae Colonization in the Intensive Care Unit: Risk Factors and Microbiome Analysis Study.

Older patients with multiple comorbidities often necessitate prolonged hospital stays and antibiotic treatment in the intensive care unit (ICU), leading to a rise in multidrug-resistant organisms like carbapenem-resistant Enterobacteriaceae (CRE). This study examined risk factors for carbapenem-resistant Enterobacteriaceae colonization in the ICU and assessed probiotics' preventive role. In this single-center, retrospective study, 9099 ICU patients were tested for stool CRE culture from March 2017 to April 2022. We excluded 136 patients with CRE colonization within one week post-admission and 26 who received probiotics before CRE colonization. Ultimately, 8937 CRE-negative patients were selected. Logistic analysis identified CRE colonization risk factors and evaluated probiotics' influence, including Saccharomyces boulardii or Lactobacillus rhamnosus, used by 474 patients (5.3%) in the ICU. Compared with data on initial admission, 157 patients (1.7%) had newly discovered CRE colonization before discharge. In a multivariate analysis, coronavirus disease 2019, the ICU, tube feeding, antibiotics such as aminoglycoside, extended-spectrum penicillin, stool vancomycin-resistance enterococci colonization, and chronic kidney disease were significantly associated with de novo CRE infection. However, probiotic use was negatively correlated with CRE infection. Managing risk factors and administering probiotics in the ICU may help prevent CRE colonization; large randomized prospective studies are needed.

Blood Concentrations of Lead, Cadmium, and Mercury Are Associated With Alcohol-Related Liver Disease.

BACKGROUND: An association between environmental pollutants and alcohol-related liver disease (ALD) has not been determined until now. The objectives of this study were to examine the association of the pollutants with ALD, and whether the pollutants together increased the risk of ALD. METHODS: Data were extracted from the Korea National Health and Nutrition Examination Survey (2010-2013 and 2016-2017; n = 11,993). Blood levels of lead, cadmium, and mercury were measured. ALD was defined by a combination of excessive alcohol consumption and ALD/non-alcoholic fatty liver disease index > 0. The aspartate aminotransferase-to-platelet ratio index and fibrosis (FIB)-4 score were used to evaluate ALD FIB. RESULTS: The odds ratios (ORs) of ALD for the highest versus the lowest quartiles of exposure were for lead, 7.39 (95% confidence interval [CI], 5.51-9.91); cadmium, 1.68 (95% CI, 1.32-2.14); and mercury, 5.03 (95% CI, 3.88-6.53). Adjusting for age, gender, smoking, occupation, education, and personal income attenuated the associations but indicated significant positive trends (all Ptrend < 0.001). A positive additive interaction between cadmium and lead was observed. The relative excess OR due to the interaction was 0.96 (95% CI, 0.41-1.51); synergy index = 2.92 (95% CI, 0.97-8.80). Among 951 subjects with ALD, advanced FIB was associated with lead and cadmium (OR, 3.46, 95% CI, 1.84-6.53; OR, 8.50, 95% CI, 2.54-28.42, respectively), but not with mercury. The effect estimates for lead and cadmium remained significant even after adjustment for daily alcohol intake. CONCLUSION: Blood levels of lead, cadmium, and mercury were significantly associated not only with the risk of ALD but also with ALD FIB. Cadmium and lead have synergistic effects that increase the risk of ALD.

Uncovering key clinical trial features influencing recruitment.

Background: Randomized clinical trials (RCT) are the foundation for medical advances, but participant recruitment remains a persistent barrier to their success. This retrospective data analysis aims to (1) identify clinical trial features associated with successful participant recruitment measured by accrual percentage and (2) compare the characteristics of the RCTs by assessing the most and least successful recruitment, which are indicated by varying thresholds of accrual percentage such as ≥ 90% vs ≤ 10%, ≥ 80% vs ≤ 20%, and ≥ 70% vs ≤ 30%. Methods: Data from the internal research registry at Columbia University Irving Medical Center and Aggregated Analysis of ClinicalTrials.gov were collected for 393 randomized interventional treatment studies closed to further enrollment. We compared two regularized linear regression and six tree-based machine learning models for accrual percentage (i.e., reported accrual to date divided by the target accrual) prediction. The outperforming model and Tree SHapley Additive exPlanations were used for feature importance analysis for participant recruitment. The identified features were compared between the two subgroups. Results: CatBoost regressor outperformed the others. Key features positively associated with recruitment success, as measured by accrual percentage, include government funding and compensation. Meanwhile, cancer research and non-conventional recruitment methods (e.g., websites) are negatively associated with recruitment success. Statistically significant subgroup differences (corrected p-value < .05) were found in 15 of the top 30 most important features. Conclusion: This multi-source retrospective study highlighted key features influencing RCT participant recruitment, offering actionable steps for improvement, including flexible recruitment infrastructure and appropriate participant compensation.

Effects of ultraviolet weathering aging on the color stability and biocompatibility of various computer-aided design and computer-aided manufacturing glass-ceramic materials.

OBJECTIVES: This study assessed the changes in color stability and biocompatibility of computer-aided design and computer-aided manufacturing (CAD-CAM) glass-ceramics after ultraviolet weathering (UW) aging. METHODS: A total of 300 plate-shaped specimens (12.0 × 14.0 × 1.5 mm3) were prepared using a leucite-reinforced glass-ceramic (IPS Empress CAD; E), a lithium disilicate (IPS e.max CAD; M), and two zirconia-reinforced lithium silicate (Celtra Duo; C, Vita Suprinity; V) glass-ceramics. Specimens were divided into three groups (n = 25, each), subjected to water storage at 37 °C for 24 h (control group), or UW aging at 150 kJ/m2 (first-aged group) or 300 kJ/m2 (second-aged group). The color stability, mechanical and surface properties, and biocompatibility of the CAD-CAM glass-ceramics were investigated experimentally, followed by statistical analysis. RESULTS: The brightness and redness or greenness were reduced in all groups after aging. After the first aging, V exhibited the largest color change and E exhibited the smallest color change. After the second aging, E exhibited the highest nanoindentation hardness and Young's modulus. The surface roughness was the highest for V after the first aging. Furthermore, the hydrophilicity of the materials increased after aging process. The cell proliferation/viability of human gingival fibroblasts was the highest in E before and after aging. Almost all cells survived for all groups based on a live/dead assay. CONCLUSIONS: Leucite-reinforced glass-ceramic exhibit the highest color stability and biocompatibility after aging. The color stability and biocompatibility of CAD-CAM glass-ceramics depend on the aging process and material type. CLINICAL SIGNIFICANCE: Various CAD-CAM glass-ceramics exhibit adequate color stability after UW aging. The leucite-reinforced glass-ceramics exhibit the highest color stability, cell proliferation, and viability after aging. The color stability, mechanical and surface properties, and biocompatibility of the glass-ceramics depend on the aging process and material type.