RESUMEN
Fluorescent proteins (FPs) are essential tools for advanced microscopy techniques such as super-resolution imaging, single-particle tracking, and quantitative single-molecule counting. Various FPs fused to DNA-binding proteins have been used to observe the subcellular location and movement of specific gene loci in living and fixed bacterial cells. However, quantitative assessments of the properties of FPs for gene locus measurements are still lacking. Here, we assessed various FPs to observe specific gene loci in live and fixed Escherichia coli cells using a fluorescent repressor-operator binding system (FROS), tet operator-Tet repressor proteins (TetR). Tsr-fused FPs were used to assess the intensity and photostability of various FPs (five red FPs: mCherry2, FusionRed, mRFP, mCrimson3, and dKatushka; and seven yellow FPs: SYFP2, Venus, mCitrine, YPet, mClover3, mTopaz, and EYFP) at the single-molecule level in living cells. These FPs were then used for gene locus measurements using FROS. Our results indicate that TetR-mCrimson3 (red) and TetR-EYFP (yellow) had better properties for visualizing gene loci than the other TetR-FPs. Furthermore, fixation procedures affected the clustering of diffusing TetR-FPs and altered the locations of the TetR-FP foci. Fixation with formaldehyde consistently disrupted proper DNA locus observations using TetR-FPs. Notably, the foci measured using TetR-mCrimson3 remained close to their original positions in live cells after glyoxal fixation. This in vivo study provides a cell-imaging guide for the use of FPs for gene-locus observation in E. coli and a scheme for evaluating the use of FPs for other cell-imaging purposes.
Asunto(s)
Escherichia coli , Proteínas Luminiscentes , Escherichia coli/genética , Escherichia coli/metabolismo , Proteínas Luminiscentes/genética , Proteínas Luminiscentes/química , Proteínas Luminiscentes/metabolismo , Microscopía Fluorescente , Sitios Genéticos , Proteínas Represoras/genética , Proteínas Represoras/metabolismo , Proteínas Represoras/químicaRESUMEN
Docking domains (DDs) located at the C- and N-termini of polypeptides play a crucial role in directing the assembly of polyketide synthases (PKSs), which are multienzyme complexes. Here, we determined the crystal structure of a complex comprising the C-terminal DD (CDDMlnB) and N-terminal DD (NDDMlnC) of macrolactin trans-acyltransferase (AT) PKS that were fused to a functional enzyme, AmpC EC2 ß-lactamase. Interface analyses of the CDDMlnB/NDDMlnC complex revealed the molecular intricacies in the core section underpinning the precise DD assembly. Additionally, circular dichroism and steady-state kinetics demonstrated that the formation of the CDDMlnB/NDDMlnC complex had no influence on the structural and functional fidelity of the fusion partner, AmpC EC2. This inspired us to apply the CDDMlnB/NDDMlnC assembly to metabolon engineering. Indeed, DD assembly induced the formation of a complex between 4-coumarate-CoA ligase and chalcone synthase both involved in flavonoid biosynthesis, leading to a remarkable increase in naringenin production in vitro.
RESUMEN
OBJECTIVES: To compare skeletodental changes between early and late treatment groups using modified C-palatal plates (MCPP) and long-term retention outcomes in hyperdivergent Class II adolescents. MATERIALS AND METHODS: Seventy-one hyperdivergent Class II patients were divided into four groups according to treatment modality and treatment timing: group 1, early treatment with MCPP (n = 16; 9.9 ± 0.9 years); group 2, late treatment with MCPP (n = 19; 12.3 ± 0.8 years); group 3, early treatment with headgear (HG; n = 18; 9.6 ± 0.8 years); and group 4, late treatment with HG (n = 18; 12.1 ± 1.2 years). Lateral cephalograms were taken and skeletal and dental variables were measured. For statistical analysis, paired t-tests, independent t-tests, and multiple regression were performed. RESULTS: The early MCPP group showed a more significant decrease in mandibular plane angle than the late MCPP group did, and vertical control was more efficient in the early group than in the late group. In the MCPP groups, both FMA and SN-GoGn were increased with late treatment but decreased with early treatment, and the difference was statistically significant (P < .01). The early-treatment MCPP group had a significant decrease in SN-GoGn of 0.6° compared with an increase of 1.7° in the early treatment HG group (P < .01). Posttreatment stability of both the early and late MCPP groups was maintained in long-term retention. CONCLUSIONS: Early MCPP showed more significant vertical control than late MCPP. However, there was no difference in long-term stability between early and late groups.
Asunto(s)
Maloclusión Clase II de Angle , Hueso Paladar , Humanos , Adolescente , Cefalometría , Análisis Multivariante , Aparatos de Tracción Extraoral , Diente Molar , Maloclusión Clase II de Angle/diagnóstico por imagen , Maloclusión Clase II de Angle/terapia , MandíbulaRESUMEN
This study aimed to introduce cone-beam computed tomography (CBCT) digitization and integration of digital dental images (DDI) based on artificial intelligence (AI)-based registration (ABR) and to evaluate the reliability and reproducibility using this method compared with those of surface-based registration (SBR). This retrospective study consisted of CBCT images and DDI of 17 patients who had undergone computer-aided bimaxillary orthognathic surgery. The digitization of CBCT images and their integration with DDI were repeated using an AI-based program. CBCT images and DDI were integrated using a point-to-point registration. In contrast, with the SBR method, the three landmarks were identified manually on the CBCT and DDI, which were integrated with the iterative closest points method. After two repeated integrations of each method, the three-dimensional coordinate values of the first maxillary molars and central incisors and their differences were obtained. Intraclass coefficient (ICC) testing was performed to evaluate intra-observer reliability with each method's coordinates and compare their reliability between the ABR and SBR. The intra-observer reliability showed significant and almost perfect ICC in each method. There was no significance in the mean difference between the first and second registrations in each ABR and SBR and between both methods; however, their ranges were narrower with ABR than with the SBR method. This study shows that AI-based digitization and integration are reliable and reproducible.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Imagenología Tridimensional , Humanos , Reproducibilidad de los Resultados , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Inteligencia Artificial , Estudios Retrospectivos , Tomografía Computarizada de Haz Cónico/métodosRESUMEN
OBJECTIVES: To compare posttreatment stability in skeletal Class III patients between those treated by total mandibular arch distalization (TMAD) with buccal mini-implants and those by mandibular setback surgery (MSS). MATERIALS AND METHODS: The samples included 40 Class III adults, 20 treated by TMAD using buccal interradicular mini-implants and 20 treated with MSS. Lateral cephalograms were taken at pretreatment, posttreatment, and at least 1-year follow-up, and 24 variables were compared using statistical analysis. RESULTS: Mandibular first molars moved distally 1.9 mm with intrusion of 1.1 mm after treatment in the TMAD group. The mandibular incisors moved distally by 2.3 mm. The MSS group exhibited a significant skeletal change of the mandible, whereas the TMAD group did not. During retention, there were no skeletal or dental changes other than 0.6 mm labial movement of the mandibular incisors (P < .05) in the MSS group. There was 1.4° of mesial tipping (P < .01) and 0.4 mm of mesial movement of the mandibular molars and 1.9° of labial tipping (P < .001) and 0.8 mm of mesial movement of the mandibular incisors in the TMAD group. These dental changes were not significantly different between the two groups. CONCLUSIONS: The TMAD group showed a slightly decreased overjet with labial tipping of the mandibular incisors and mesial tipping of the first molars during retention. Posttreatment stability of the mandibular dentition was not significantly different between the groups. It can be useful to plan camouflage treatment by TMAD with mini-implants in mild-to-moderate Class III patients.
Asunto(s)
Maxilar , Sobremordida , Adulto , Humanos , Técnicas de Movimiento Dental , Cefalometría , Mandíbula/cirugíaRESUMEN
OBJECTIVES: This retrospective study aims to compare long-term stability between the mandibular setback surgery-early (MSE) approach, involving minimal orthodontics, and the mandibular setback conventional surgery (MCS) approach, involving sufficient orthodontics, in Class III patients with mandibular prognathism. METHODS: Among 210 patients who underwent orthognathic surgery, a total of 40 subjects were enrolled based on standardized inclusion criteria: only mandibular surgery, <5 mm setback difference between right and left of the mandible, orthodontics with fixed appliances, and more than 2 years of follow-up after treatment. These patients were allocated to the MSE (n = 20) and MCS groups (n = 20) according to the duration of presurgical orthodontics. Changes in cephalometric measurements were compared between the MSE and MCS groups before surgery (T0), 1 month after surgery (T1), at the end of treatment (T2), and posttreatment retention (T3). RESULTS: The MSE and MCS groups had a mean presurgical orthodontic duration of 2 and 9.5 months, respectively. From T1 to T2, the MSE group showed a significantly larger forward movement of the mandible than the MCS group (2.1 versus 0.7 mm; P < 0.001). In addition, from T2 to T3 (average 4.6 years), the MSE group presented anterior relapse of 0.6 mm in the mandible, but there were no statistically significant intergroup differences. CONCLUSION: Although the MSE group showed greater postsurgical forward mandibular relapse than the MCS group, the two groups exhibited similar skeletal and dental stability during the posttreatment retention.
Asunto(s)
Maloclusión de Angle Clase III , Maxilar , Humanos , Estudios de Seguimiento , Estudios Retrospectivos , Resultado del Tratamiento , Maxilar/cirugía , Maloclusión de Angle Clase III/cirugía , Mandíbula/cirugía , Cefalometría , RecurrenciaRESUMEN
BACKGROUND: Retinoblastoma is an intraocular cancer of infancy and childhood, which has been treated with radiation therapy and chemotherapy. Radiation on growing patients can cause deterioration in maxillofacial growth and development that leads to severe skeletal discrepancies between the maxilla and mandible, and dental problems such as crossbite, openbite, and hypodontia. CASE PRESENTATION: We present the case of a 19-year-old Korean man with chewing disability and dentofacial deformities. He had undergone enucleation of the right eye and radiation therapy of the left eye due to retinoblastoma 100 days after birth. Subsequently, he received cancer therapy for the secondary nasopharyngeal cancer at the age of 11 years. He was diagnosed with severe skeletal deformity including sagittal, transverse, and vertical growth deficiency of the maxilla and midface, and with class III malocclusion, severe anterior and posterior crossbite, posterior openbite, multiple missing upper incisors, right premolars, and second molars, and impaction of the lower right second molars. To restore impaired functions and esthetics of the jaw and dentition, the orthodontic treatment combined with two jaw surgery was performed. At the end of surgical orthodontics, dental implants were placed for prosthetic treatment of missing teeth. Additional plastic surgery for zygoma elevation was done with calvarial bone graft followed by fat graft. Facial esthetics and occlusal functions of patient were favorably enhanced with the improvement of skeletal discrepancy and the rehabilitation of maxillary dentition by prosthetic work. At the 2-year follow-up, the skeletal and dental relationships and implant prosthetics were well maintained. CONCLUSION: In an adult patient with dentofacial deformities caused by early cancer therapy in the head and neck area, interdisciplinary interventions including additional plastic surgery of zygoma depression and prosthetic work of missing teeth as well as surgical-orthodontic treatment could establish favorable facial esthetics and oral rehabilitation.
Asunto(s)
Anodoncia , Deformidades Dentofaciales , Maloclusión , Neoplasias Nasofaríngeas , Mordida Abierta , Neoplasias de la Retina , Retinoblastoma , Pérdida de Diente , Masculino , Adulto , Humanos , Niño , Adulto Joven , Retinoblastoma/radioterapia , Maloclusión/etiología , Maloclusión/terapia , Maxilar/cirugía , Neoplasias de la Retina/radioterapiaRESUMEN
Molecular emitters simultaneously generating light at different wavelengths have wide applications. With a small molecule, however, it is challenging to realize two independent radiative pathways. We invented the first examples of dual-emissive single-benzene fluorophores (SBFs). Two emissive tautomers are generated by synthetic modulation of the hydrogen bond acidity, which opens up pathways for excited-state proton transfer. White light is produced by a delicate balance between the energy and intensity of the emission from each tautomer. We show that the excited-state antiaromaticity of the benzene core itself dictates the proton movements driving the tautomer equilibrium. Using this simple benzene platform, a fluorinated SBF was synthesized with a record high solubility in perfluorocarbon solvents. White light-emitting devices and multicolor imaging of perfluorocarbon nanodroplets in live cells demonstrate the practical utility of these molecules.
RESUMEN
OBJECTIVE: To compare the short-term treatment effects between two types of facemasks in skeletal Class III patients. MATERIALS AND METHODS: This retrospective study included 40 skeletal Class III subjects (mean age: 7.7 years) who had been treated with protraction facemasks with forehead straps (PFFS) or Petit type facemasks (PTF). Lateral cephalograms were analyzed at pretreatment (T1) and posttreatment (T2) with an average interval of 9 months. RESULTS: At T1, PFFS and PTF groups showed similar sagittal, vertical dentoskeletal patterns. From T1 to T2, both groups presented significant forward movement of the maxilla, posterior movement and clockwise rotation of the mandible (all p < .001), labioversion of the maxillary incisors, and linguoversion of the mandibular incisors. They showed increased overjet (p < .001). Although there were no significant differences in the number of changes in most dentoskeletal variables between the two groups, the PFFS group showed more anterior rotation of the palatal plane and backward rotation of the mandible compared to the PTF group, resulting in a significant decrease (-0.42 mm) in overbite (p < .05). CONCLUSIONS: Both PFFS and PTF showed no significant differences in most skeletal and dental changes, except for overbite. These findings might be helpful for clinicians in selecting the types of facemasks for growing Class III malocclusion patients.
Asunto(s)
Maloclusión Clase II de Angle , Sobremordida , Humanos , Niño , Estudios Retrospectivos , Máscaras , Cefalometría/métodos , MandíbulaRESUMEN
Neuronal communication depends on exquisitely regulated membrane fusion between synaptic vesicles and presynaptic neurons, which results in neurotransmitter release in precisely timed patterns. Presynaptic dysfunctions are known to occur prior to the onset of neurodegenerative diseases, including Parkinson's disease. Synaptic accumulation of α-synuclein (α-Syn) oligomers has been implicated in the pathway leading to such outcomes. α-Syn oligomers exert aberrant effects on presynaptic fusion machinery through their interactions with synaptic vesicles and proteins. Here, we summarize in vitro bulk and single-vesicle assays for investigating the functions of α-Syn monomers and oligomers in synaptic vesicle fusion and then discuss the current understanding of the roles of α-Syn monomers and oligomers in synaptic vesicle fusion. Finally, we suggest a new therapeutic avenue specifically targeting the mechanisms of α-Syn oligomer toxicity rather than the oligomer itself.
Asunto(s)
Fusión de Membrana , Proteínas SNARE , Vesículas Sinápticas , alfa-Sinucleína , alfa-Sinucleína/metabolismo , Proteínas SNARE/metabolismo , Transmisión Sináptica/fisiología , Vesículas Sinápticas/metabolismoRESUMEN
INTRODUCTION: The purpose of this study was to assess speech perturbation and adaptation for patients wearing modified C-palatal plates (MCPPs) over time. METHODS: The sample consisted of 40 patients, 20 wearing MCPPs as the experimental group (age: 20.7 ± 5.8 years) and 20 patients wearing a transpalatal arch (TPA) as the control group (age: 21.5 ± 6.4 years). The sounds /t/, /d/, /s/, /n/, /r/, /tÊ/. and /j/ were recorded for each patient at six time points: immediately before (T0) and after (T1) appliance placement; then 1, 2, 3 and 4 weeks after placement (T2-T5). Acoustic analysis of pitch and voice onset time (VOT) was performed by Praat software. Repeated measures analysis of variance (RM-ANOVA) was used to assess changes in the pitch and VOT over time and the difference between the appliances. RESULTS: With the MCPP appliance, /n/, /r/, /tÊ/ and /j/ decreased in VOT starting in the first week while /t/ and /s/ almost returned to pre-treatment levels after 2 weeks. VOT for the /d/ sound did not change between T0 and T3, but it decreased after 3 weeks. There were no significant differences in pitch and VOT between the two groups at any time point. CONCLUSIONS: Wearing an MCPP device caused patients to initially distort the articulation of several sounds, but the distortion dissipated within 1 to 2 weeks. It is recommended that patients and/or their parents be advised during pre-treatment counselling of the possibility of temporary speech changes with MCPP placement.
Asunto(s)
Acústica , Habla , Humanos , Adolescente , Adulto Joven , AdultoRESUMEN
Synaptic accumulation of α-synuclein (α-Syn) oligomers and their interactions with VAMP2 have been reported to be the basis of synaptic dysfunction in Parkinson's disease (PD). α-Syn mutants associated with familial PD have also been known to be capable of interacting with VAMP2, but the exact mechanisms resulting from those interactions to eventual synaptic dysfunction are still unclear. Here, we investigate the effect of α-Syn mutant oligomers comprising A30P, E46K, and A53T on VAMP2-embedded vesicles. Specifically, A30P and A53T oligomers cluster vesicles in the presence of VAMP2, which is a shared mechanism with wild type α-Syn oligomers induced by dopamine. On the other hand, E46K oligomers reduce the membrane mobility of the planar bilayers, as revealed by single-particle tracking, and permeabilize the membranes in the presence of VAMP2. In the absence of VAMP2 interactions, E46K oligomers enlarge vesicles by fusing with one another. Our results clearly demonstrate that α-Syn mutant oligomers have aberrant effects on VAMP2-embedded vesicles and the disruption types are distinct depending on the mutant types. This work may provide one of the possible clues to explain the α-Syn mutant-type dependent pathological heterogeneity of familial PD.
Asunto(s)
Enfermedad de Parkinson , alfa-Sinucleína , Humanos , alfa-Sinucleína/genética , Transporte Biológico , Dopamina , Mutación , Enfermedad de Parkinson/genética , Proteína 2 de Membrana Asociada a Vesículas/genéticaRESUMEN
INTRODUCTION: This study aimed to evaluate the dentoskeletal and soft-tissue changes after molar distalization using modified C-palatal plates in patients with severe maxillomandibular arch length discrepancies. METHODS: Twenty-four patients with Class I and II malocclusion (19.0 ± 7.3 years; 17 females and 8 males), who had severe maxillary crowding of >10 mm, and moderate mandibular crowding of >6 mm, underwent molar distalization using modified C-palatal plates and buccal miniscrews with approximately 300 g of force per side. Models were made, and cephalograms were taken before and after treatment. Cephalometric variables and arch dimensions were measured. Paired t test and Wilcoxon rank sum test were used for statistical analysis. RESULTS: In the maxillary dentition, an average of 12.4 mm of crowding was resolved by molar distalization of 4.4 mm, interproximal stripping of 0.7 mm, and arch expansion. In the mandibular dentition, crowding of 6.7 mm was alleviated by molar distalization of 2.4 mm, an interproximal of 1.5 mm, and additional arch expansion. The incisor positions were maintained (SN-U1, 101.3°; IMPA, 88.8°), and soft-tissue profiles were improved (LL/E-line -1.1 mm; P < 0.001) after treatment. CONCLUSIONS: Maxillary and mandibular tooth-size arch length discrepancy of 12.4 mm and 6.7 mm, respectively, were resolved by molar distalization, interproximal reduction, and arch expansion, whereas incisor positions were maintained, and soft-tissue profiles were improved. This could be a viable treatment option in patients with moderate-to-severe crowding.
Asunto(s)
Maloclusión Clase II de Angle , Maloclusión , Masculino , Femenino , Humanos , Maloclusión Clase II de Angle/diagnóstico por imagen , Maloclusión Clase II de Angle/cirugía , Técnicas de Movimiento Dental , Cefalometría/métodos , Diente Molar/diagnóstico por imagen , Diente Molar/cirugía , Maxilar/diagnóstico por imagen , Maxilar/cirugíaRESUMEN
INTRODUCTION: Evaluate the treatment effects of maxillary protraction using palatal plates and compare them to those with conventional tooth-borne anchorage in growing patients with Class III malocclusion. METHODS: Forty patients were divided into 2 groups according to the type of anchorage used: group 1 (n = 20; mean age, 10.5 ± 1.6 years; palatal plates) and group 2 (n = 20; mean age, 10.0 ± 1.2 years; tooth-borne appliances). Lateral cephalograms were taken before and after maxillary protraction. Skeletal, dental, and soft-tissue variables were measured. For statistical analysis, paired and independent t tests were performed. RESULTS: Group 1 showed maxilla advancement by 2.3 ± 1.0 mm compared with group 2 by 0.9 ± 0.6 mm, and group 2 indicated clockwise rotation of the mandible, but there was no such clockwise rotation in group 1 (P <0.001). Group 1 had a less lingual inclination of the mandibular incisors than group 2 (IMPA, -1.0 ± 3.8° vs -3.8 ± 2.8°; P <0.05). There was no difference in soft-tissue changes between the 2 groups. CONCLUSIONS: A facemask with palatal plate induced maxillary advancement with less mandibular clockwise rotation and dental movement than conventional tooth-borne anchorage. This modality can be used efficiently for maxillary protraction in growing patients with Class III malocclusion.
Asunto(s)
Maloclusión de Angle Clase III , Métodos de Anclaje en Ortodoncia , Cefalometría , Niño , Aparatos de Tracción Extraoral , Humanos , Maloclusión de Angle Clase III/terapia , Maxilar , Técnica de Expansión PalatinaRESUMEN
Cytosine methylation plays an essential role in many biological processes, such as nucleosome inactivation and regulation of gene expression. The modulation of DNA mechanics may be one of the regulatory mechanisms influenced by cytosine methylation. However, it remains unclear how methylation influences DNA mechanics. Here, we show that methylation has contrasting effects on the bending property of dsDNA depending on DNA curvature. We directly applied bending force on 30 base pairs of dsDNA using a D-shaped DNA nanostructure and measured the degree of bending using single-molecule fluorescence resonance energy transfer without surface immobilization. When dsDNA is weakly bent, methylation increases the stiffness of dsDNA. The stiffness of dsDNA increased by approximately 8% with a single methylation site for 30 bp dsDNA. When dsDNA is highly bent by a strong force, it forms a kink, i.e., a sharp bending of dsDNA. Under strong bending, methylation destabilizes the non-kink form compared with the kink form, which makes dsDNA near the kink region apparently more bendable. However, if the kink region is methylated, the kink form is destabilized, and dsDNA becomes stiffer. As a result, methylation increases the stiffness of weakly bent dsDNA and concurrently can promote kink formation, which may stabilize the nucleosome structure. Our results provide new insight into the effect of methylation, showing that cytosine methylation has opposite effects on DNA mechanics depending on its curvature and methylation location.
RESUMEN
Z-DNA, a noncanonical helical structure of double-stranded DNA (dsDNA), plays pivotal roles in various biological processes, including transcription regulation. Mechanical stresses on dsDNA, such as twisting and stretching, help to form Z-DNA. However, the effect of DNA bending, one of the most common dsDNA deformations, on Z-DNA formation is utterly unknown. Here, we show that DNA bending induces the formation of Z-DNA, that is, more Z-DNA is formed as the bending force becomes stronger. We regulated the bending force on dsDNA by using D-shaped DNA nanostructures. The B-Z transition was observed by single-molecule fluorescence resonance energy transfer. We found that as the bending force became stronger, Z-DNA was formed at lower Mg2+ concentrations. When dsDNA contained cytosine methylations, the B-Z transition occurred at 78 mM Mg2+ (midpoint) in the absence of the bending force. However, the B-Z transition occurred at a 28-fold lower Mg2+ concentration (2.8 mM) in the presence of the bending force. Monte Carlo simulation suggested that the B-Z transition stabilizes the bent form via the formation of the B-Z junction with base extrusion, which effectively releases the bending stress on DNA. Our results clearly show that the bending force facilitates the B-Z transition under physiological salt conditions.
Asunto(s)
ADN de Forma Z , ADN/química , Replicación del ADN , Fenómenos Mecánicos , Conformación de Ácido NucleicoRESUMEN
INTRODUCTION: The purpose of this study was to evaluate the treatment effects after molar distalization using modified C-palatal plates in patients with Class II malocclusion with maxillary sinus pneumatization. METHODS: This study consisted of 70 lateral cephalograms derived from cone-beam computerized tomography images of 35 patients with Class II malocclusion (mean age 22.3 ± 7.4 years) who had undergone bilateral total arch distalization of the maxillary dentition using modified C-palatal plates. The samples were divided into 2 groups according to sinus pneumatization; group 1 (n = 40), cephalograms with sinus pneumatization and group 2 (n = 30) cephalograms without sinus pneumatization. Paired t tests and independent-sample t tests were used to compare the changes in each group and between groups. RESULTS: The distal movement of the maxillary first molars was 4.3 mm for group 1 and 3.5 mm for group 2, with the intrusion of 1.4 mm and 2.5 mm, respectively. There was no statistically significant difference between the 2 groups. Group 1 showed 3.5° of distal tipping of the maxillary second molars, which was significantly greater than the 0.2° in group 2 (P <0.05). The total treatment period, including distalization, was 2.2 years for group 1 and 1.9 years for group 2, but the difference was not significant. CONCLUSIONS: There was no significant difference in the amount of distal movement and intrusion of the maxillary first molars between groups 1 and 2. Therefore, these results suggest that regardless of sinus pneumatization, molar distalization using temporary skeletal anchorage devices in Class II patients can be performed as a nonextraction treatment.
Asunto(s)
Maloclusión Clase II de Angle , Métodos de Anclaje en Ortodoncia , Adolescente , Adulto , Cefalometría/métodos , Humanos , Maloclusión Clase II de Angle/diagnóstico por imagen , Maloclusión Clase II de Angle/terapia , Maxilar/diagnóstico por imagen , Diseño de Aparato Ortodóncico , Técnicas de Movimiento Dental/métodos , Adulto JovenRESUMEN
The aim of this study was to evaluate the intra- and inter-observer reliability of maxillary digital dental model integration into cone-beam computed tomography (CBCT) scans to reconstruct three-dimensional (3D) skeletodental models for orthognathic patients. This retrospective study consisted of CBCT and digital maxillary dentition images of 20 Class III orthognathic patients. After two repeated fusions of digital cast images with reconstructed CBCT images by a digital engineer and an orthodontist respectively, the 3D coordinate values of the canines, first molars, and central incisors were evaluated. The intra- and inter-observer reliability of 3D positions of maxillary teeth were compared using intraclass correlation coefficients (ICCs). Intra-observer reliability of x-, y-, and z-coordinate values of maxillary teeth showed significant and excellent agreement in an engineer (0.946 ≤ ICC ≤ 1.000) and an orthodontist (0.876 ≤ ICC ≤ 1.000). The inter-observer reliability of the y- and z-coordinates of each tooth was significantly excellent or good, but that of the x-coordinates showed insignificantly poor to moderate agreement. This study showed that the integration of maxillary digital models into CBCT scans was clinically reliable. However, considering the low inter-observer reliability on the x-coordinates of dentition, clinical experience and repeated learning are needed for accurate application of digital skeletodental model in orthognathic patients.
Asunto(s)
Artefactos , Imagenología Tridimensional , Tomografía Computarizada de Haz Cónico/métodos , Humanos , Imagenología Tridimensional/métodos , Reproducibilidad de los Resultados , Estudios RetrospectivosRESUMEN
INTRODUCTION: This study aimed to compare treatment effects after total mandibular arch distalization with buccal interradicular miniscrews vs ramal plates in patients with Class III malocclusion. METHODS: The sample consisted of 40 patients with Class III malocclusion; 20 were treated with distalization via buccal miniscrews (age, 25.8 ± 7.9 years), whereas 20 were treated with ramal plates (age, 26.4 ± 6.1 years). Twenty-three linear and angular measurements were analyzed on pretreatment and posttreatment lateral cephalograms. The changes in each group and differences in treatment effects between the 2 groups were evaluated. RESULTS: The mean amount of distalization at the crown and root levels of the mandibular first molars and the amount of distal tipping was 1.8 mm, 0.6 mm, and 5.4° in the buccal miniscrew group vs 3.6 mm, 2.0 mm, and 6.8° in the ramal plate group, respectively. In addition, 2.2° of counterclockwise rotation of the occlusal plane was observed in the buccal miniscrew group after 1.3 mm of molar intrusion (P <0.001). The distal movement of the lower lip was 0.6 mm in the buccal miniscrew group vs 2.3 mm in the ramal plate group. CONCLUSIONS: The buccal miniscrew group showed more molar intrusion and counterclockwise rotation of the occlusal plane than in the ramal plate group. The ramal plate produced more distalization of the mandibular dentition with clockwise rotation of the mandible. Therefore, these results can be useful when selecting the type of temporary skeletal anchorage devices to treat patients with Class III malocclusion, depending on their vertical pattern.