IL4 receptor targeting enables nab-paclitaxel to enhance reprogramming of M2-type macrophages into M1-like phenotype via ROS-HMGB1-TLR4 axis and inhibition of tumor growth and metastasis.

Rationale: Nab-paclitaxel (Abx) is widely employed in malignant tumor therapy. In tumor cells and pro-tumoral M2-type macrophages, the IL4 receptor (IL4R) is upregulated. This study aimed to elucidate the selective delivery of Abx to M2-type macrophages by targeting IL4R and reprogramming them into an anti-tumoral M1-type. Methods: Abx was conjugated with the IL4R-binding IL4RPep-1 peptide using click chemistry (IL4R-Abx). Cellular internalization, macrophage reprogramming and signal pathways, and tumor growth and metastasis by IL4R-Abx were examined. Results: IL4R-Abx was internalized into M2 macrophages more efficiently compared to the unmodified Abx and control peptide-conjugated Abx (Ctrl-Abx), which was primarily inhibited using an anti-IL4R antibody and a receptor-mediated endocytosis inhibitor compared with a macropinocytosis inhibitor. IL4R-Abx reprogrammed the M2-type macrophages into M1-like phenotype and increased reactive oxygen species (ROS) levels and extracellular release of high mobility group box 1 (HMGB1) in M2 macrophages at higher levels than Abx and Ctrl-Abx. The conditioned medium of IL4R-Abx-treated M2 macrophages skewed M2 macrophages into the M1-like phenotype, in which an anti-HMGB1 antibody and a toll-like receptor 4 (TLR4) inhibitor induced a blockade. IL4R-Abx accumulated at tumors, heightened immune-stimulatory cells while reducing immune-suppressing cells, and hampered tumor growth and metastasis in mice more efficiently than Abx and Ctrl-Abx. Conclusions: These results indicate that IL4R-targeting allows enhancement of M2-macrophage shaping into M1-like phenotype by Abx through the ROS-HMGB1-TLR4 axis, improvement of antitumor immunity, and thereby inhibition of tumor growth and metastasis, presenting a new approach to cancer immunotherapy.

Partial Venous Inflow Occlusion under Mild Hypothermia for Membranectomy in a Dog with Cor Triatriatum Dexter.

Cor triatriatum dexter (CTD) is an uncommon congenital cardiac anomaly in dogs. This case report describes successful membranectomy for CTD via partial venous inflow occlusion under mild hypothermia in a dog. A 7-month-old intact male mixed-breed dog weighing 20.5 kg presented with a history of abdominal distention, lethargy, and anorexia. Clinical examination, radiography, echocardiography, microbubble testing, and computed tomography revealed a remnant right atrium membrane obscuring the venous blood inflow from the vena cava. Considering the potential risk of re-stenosis following interventional treatment, curative resection involving surgical membranectomy via venous inflow occlusion was performed. By performing partial venous inflow occlusion under mild hypothermia (34.5 °C), sufficient time was obtained to explore the defect and resect the remnant membrane. The dog recovered without any complications, and the clinical signs were relieved. This case illustrates that partial venous inflow occlusion under mild hypothermia is feasible for achieving curative resection of cor triatriatum dexter in dogs.

Development and Quality Characteristics of Elderly-Friendly Pulpo a La Gallega Prepared Using Texture-Modified Octopus (Octopus vulgaris) Arms.

Considering the need for developing new senior-friendly processed seafood, this study aimed to develop octopus pulpo with high preference and excellent quality characteristics for elderly individuals by optimizing the vinegar immersion and sous vide softening treatment conditions for octopus (Octopus vulgaris) arms. The optimal sous vide heating temperature (70.0-100.0 °C), time (69.5-170.5 min), and vinegar concentration (0.2-0.8%) were established using response surface methodology (RSM). The pulpo prototype was produced using an octopus arm softened under optimal conditions and seasoned with a potato and olive oil sauce. The physicochemical and nutritional properties of the prototype were evaluated, followed by sensory evaluation and safety assessments. The hardness of softened octopuses obtained by 0.48% vinegar immersion and sous vide treatment (84.3 °C, 139.8 min), determined using RSM, was 394.5 × 1000 N/m2, showing a reduction of 83.0%; this was confirmed by electron microscopic observation. The texture of the pulpo prototype with softened octopus arms showed the highest preference (8.4 points) and high physicochemical and nutritional properties. Overall, the octopus pulpo a La Gallega prototype produced using texture-modified octopus arms was suitable for consumption by elderly people with chewing disorders and could help improve their quality of life.

GaN-Based 4-MHz Full-Bridge Electrosurgical Generator Using Zero-Voltage Switching Over Wide Load Impedance Range.

In this article, a 4-MHz full-bridge inverter system for an electrosurgical generator (ESG) is presented with zero-voltage switching (ZVS) turn-on over a wide load impedance range based on wideband gap material gallium nitride (GaN) technology. The proposed resonant circuit is used for impedance matching and limits the current when the load is short state while performing ZVS over a wide load impedance range. It also ensures high power performance at high frequencies for electric surgery. The implementation methods of the GaN switch at 4 MHz with high output performance are guided by the low inductance from the gate-driver output to the switch gate node and the effective heating management structure of the GaN-based inverter. The proposed generator achieved a maximum output power of 99 W to the load and a maximum overall efficiency of 89% with overcurrent of <3 A at short state of the load. The ESG can generate constant output power of 20, 50, 70 W through mode control of 2, 5, and 7 s. The overcurrent Moreover, the proposed generator is tested on porcine tissue samples to verify its effectiveness as an ESG.

Peptides as multifunctional players in cancer therapy.

Peptides exhibit lower affinity and a shorter half-life in the body than antibodies. Conversely, peptides demonstrate higher efficiency in tissue penetration and cell internalization than antibodies. Regardless of the pros and cons of peptides, they have been used as tumor-homing ligands for delivering carriers (such as nanoparticles, extracellular vesicles, and cells) and cargoes (such as cytotoxic peptides and radioisotopes) to tumors. Additionally, tumor-homing peptides have been conjugated with cargoes such as small-molecule or chemotherapeutic drugs via linkers to synthesize peptide-drug conjugates. In addition, peptides selectively bind to cell surface receptors and proteins, such as immune checkpoints, receptor kinases, and hormone receptors, subsequently blocking their biological activity or serving as hormone analogs. Furthermore, peptides internalized into cells bind to intracellular proteins and interfere with protein-protein interactions. Thus, peptides demonstrate great application potential as multifunctional players in cancer therapy.

Analysis of suicide statistics and trends between 2011 and 2021 among Korean women.

PURPOSE: This study aims to analyze the number of suicide deaths in women, trends in suicide mortality, characteristics of suicide by age, and outcomes of suicide means over the past decade (2011- 2021) in South Korea. METHODS: Using cause of death data from Statistics Korea, an in-depth analysis of Korean women's suicide trends was conducted for the period of 2011-2021. RESULTS: In 2021, women's suicide death in Korea was 4,159, a rate of 16.2 per 100,000 population. The rate increased by 1.4% from the previous year. Since 2011, women's suicide rate has been on a steady downward trend, but since 2018, it has been on the rise again. Suicide rates among women in their 20s and 30s have increased, especially since the coronavirus disease 2019 pandemic, and suicide rates among women over 70 years remain high. As compared to 2011, pesticide poisoning and hanging among the means of suicide have decreased significantly, while drug and carbon monoxide continue to increase. CONCLUSION: Suicide rates for Korean women in their 20s and 30s have increased significantly in recent years, and those for women over 70 years remain high. Therefore, it is necessary to investigate the causes and establish national policies for targeted management of these age groups, which contributes significantly to the rising suicide rate among Korean women.

High-performance electrified hydrogel actuators based on wrinkled nanomembrane electrodes for untethered insect-scale soft aquabots.

Hydrogels have diverse chemical properties and can exhibit reversibly large mechanical deformations in response to external stimuli; these characteristics suggest that hydrogels are promising materials for soft robots. However, reported actuators based on hydrogels generally suffer from slow response speed and/or poor controllability due to intrinsic material limitations and electrode fabrication technologies. Here, we report a hydrogel actuator that operates at low voltages (<3 volts) with high performance (strain > 50%, energy density > 7 × 105 joules per cubic meter, and power density > 3 × 104 watts per cubic meter), surpassing existing hydrogel actuators and other types of electroactive soft actuators. The enhanced performance of our actuator is due to the formation of wrinkled nanomembrane electrodes that exhibit high conductivity and excellent mechanical deformation through capillary-assisted assembly of metal nanoparticles and deswelling-induced wrinkled structures. By applying an electric potential through the wrinkled nanomembrane electrodes that sandwich the hydrogel, we were able to trigger a reversible and substantial electroosmotic water flow inside a hydrogel film, which drove the controlled swelling of the hydrogel. The high energy efficiency and power density of our wrinkled nanomembrane electrode-induced actuator enabled the fabrication of an untethered insect-scale aquabot integrated with an on-board control unit demonstrating maneuverability with fast locomotion speed (1.02 body length per second), which occupies only 2% of the total mass of the robot.

Fibril-Type Textile Electrodes Enabling Extremely High Areal Capacity through Pseudocapacitive Electroplating onto Chalcogenide Nanoparticle-Encapsulated Fibrils.

Effective incorporation of conductive and energy storage materials into 3D porous textiles plays a pivotal role in developing and designing high-performance energy storage devices. Here, a fibril-type textile pseudocapacitor electrode with outstanding capacity, good rate capability, and excellent mechanical stability through controlled interfacial interaction-induced electroplating is reported. First, tetraoctylammonium bromide-stabilized copper sulfide nanoparticles (TOABr-CuS NPs) are uniformly assembled onto cotton textiles. This approach converts insulating textiles to conductive textiles preserving their intrinsically porous structure with an extremely large surface area. For the preparation of textile current collector with bulk metal-like electrical conductivity, Ni is additionally electroplated onto the CuS NP-assembled textiles (i.e., Ni-EPT). Furthermore, a pseudocapacitive NiCo-layered double hydroxide (LDH) layer is subsequently electroplated onto Ni-EPT for the cathode. The formed NiCo-LDH electroplated textiles (i.e., NiCo-EPT) exhibit a high areal capacitance of 12.2 F cm-2 (at 10 mA cm-2 ), good rate performance, and excellent cycling stability. Particularly, the areal capacity of NiCo-EPT can be further increased through their subsequent stacking. The 3-stack NiCo-EPT delivers an unprecedentedly high areal capacitance of 28.8 F cm-2 (at 30 mA cm-2 ), which outperforms those of textile-based pseudocapacitor electrodes reported to date.

How Important Is Behavioral Change during the Early Stages of the COVID-19 Pandemic? A Mathematical Modeling Study.

How important is the speed and intensity of behavioral change due to government policies, such as enhanced social distancing or lockdown, when an emerging infectious disease occurs? In this study, we introduce a deterministic SEIR model considering the behavior-changed susceptible group to investigate the effect of the speed and intensity of behavioral change on the transmission dynamics of COVID-19. We used epidemiological data from South Korea and Italy for the simulation study, because South Korea and Italy were the first countries to report an outbreak of COVID-19 after China and the prevention and response policy of each government were similar during the first outbreak of COVID-19. Simulation results showed that it took approximately twenty fewer days in Korea than in Italy until 90% of susceptible individuals changed their behavior during the first outbreak. It was observed that the behavior-changed susceptible individuals reduced the COVID-19 transmission rate by up to 93% in Korea and 77% in Italy. Furthermore, if the intensity and speed of behavioral change in Italy were the same as in Korea, the expected number of cumulative confirmed cases would have been reduced by approximately 95%, from 210,700 to 10,700, until the end of the lockdown period. We assumed that behavioral change is influenced by the number of confirmed cases and does not take into account social and cultural differences, as well as the state of the healthcare system, between the two countries. Our mathematical modeling showed how important the high intensity and fast speed of behavioral change to reduce the number of confirmed cases in the early period of an epidemic are.

A Layer-by-Layer Assembly Route to Electroplated Fibril-Based 3D Porous Current Collectors for Energy Storage Devices.

Electrical conductivity, mechanical flexibility, and large electroactive surface areas are the most important factors in determining the performance of various flexible electrodes in energy storage devices. Herein, a layer-by-layer (LbL) assembly-induced metal electrodeposition approach is introduced to prepare a variety of highly porous 3D-current collectors with high flexibility, metallic conductivity, and large surface area. In this study, a few metal nanoparticle (NP) layers are LbL-assembled onto insulating paper for the preparation of conductive paper. Subsequent Ni electroplating of the metal NP-coated substrates reduces the sheet resistance from ≈103 to <0.1 Ω sq-1 while maintaining the porous structure of the pristine paper. Particularly, this approach is completely compatible with commercial electroplating processes, and thus can be directly extended to electroplating applications using a variety of other metals in addition to Ni. After depositing high-energy MnO NPs onto Ni-electroplated papers, the areal capacitance increases from 68 to 811 mF cm-2 as the mass loading of MnO NPs increases from 0.16 to 4.31 mg cm-2 . When metal NPs are periodically LbL-assembled with the MnO NPs, the areal capacitance increases to 1710 mF cm-2 .

Comparison of the number of live births, maternal age at childbirth, and weight of live births between Korean women and immigrant women in 2018.

Purpose: This study compared maternal age at childbirth, the number of live births, and the weight of live births between Korean women and immigrant women using statistical data from the Republic of Korea for the period of 2008-2018. Methods: The analysis was conducted using data from the Microdata Integrated Service of Statistics Korea (https://mdis.kostat.go.kr/index.do). Results: Korean women and immigrant women showed a higher age at childbirth in 2018 than in 2008. The percentage of newborns of Korean women with a birth weight of less than 2.5 kg increased slightly for 3 consecutive years from 2016 to 2018, whereas for immigrant women, this percentage increased in 2017 compared to 2016 and then decreased again in 2018. Very low birth weight (less than 1.5 kg) became more common among immigrant women from 2016 to 2018. Birth at a gestational age of fewer than 37 weeks increased both among Korean and immigrant women from 2016 to 2018. In both groups, the percentage of women who had their first child within their first 2 years of marriage decreased from 2008 to 2018. Conclusion: Immigrant women had higher birth rates than Korean women, while both groups showed an increasing trend in preterm birth. Greater attention should be paid to the pregnancy and birth needs of immigrant women, and steps are needed to ensure health equity and access in order to prevent preterm births. It is also necessary to identify factors that affect preterm birth and birth of very low birth weight infants among immigrant women in the future.

Electroosmosis-Driven Hydrogel Actuators Using Hydrophobic/Hydrophilic Layer-By-Layer Assembly-Induced Crack Electrodes.

Development of soft actuators with higher performance and more versatile controllability has been strongly required for further innovative advancement of various soft applications. Among various soft actuators, electrochemical actuators have attracted much attention due to their lightweight, simple device configuration, and facile low-voltage control. However, the reported performances have not been satisfactory because their working mechanism depends on the limited electrode expansion by conventional electrochemical reactions. Herein, we report an electroosmosis-driven hydrogel actuator with a fully soft monolithic structure-based whole-body actuation mechanism using an amphiphilic interaction-induced layer-by-layer assembly. For this study, cracked electrodes with interconnected metal nanoparticles are prepared on hydrogels through layer-by-layer assembly and shape transformation of metal nanoparticles at hydrophobic/hydrophilic solvent interfaces. Electroosmotic pumping by cracked electrodes instantaneously induces hydrogel swelling through reversible and substantial hydraulic flow. The resultant actuator exhibits actuation strain of higher than 20% and energy density of 1.06 × 105 J m-3, allowing various geometries (e.g., curved-planar and square-pillared structures) and motions (e.g., slow-relaxation, spring-out, and two degree of freedom bending). In particular, the energy density of our actuators shows about 10-fold improvement than those of skeletal muscle, electrochemical actuators, and various stimuli-responsive hydrogel actuators reported to date.

Maternal, infant, and perinatal mortality statistics and trends in Korea between 2009 and 2017.

OBJECTIVE: To provide updates on maternal, infant, and perinatal mortality using the national population data of South Korea between 2009 and 2017 and describe the mortality rate by target groups, timing, or causes of events to provide a basis for detecting vulnerable populations and ensuring timely medical and political interventions. METHODS: Pregnancy-related mortality in women, as well as deaths of infants, in South Korea was identified using population data from Statistics Korea. Records from death certificates, cremation reports on infant and fetal deaths, and the complementary cause-of-death investigation system were reviewed for the 2009-2017 period. RESULTS: A total of 461 maternal deaths, 11,717 infant deaths, and 12,249 perinatal deaths, including fetal deaths over 28 gestational weeks, were identified from 3,945,159 live births between 2009 and 2017. The maternal mortality ratio was 13.5 deaths per 100,000 live births in 2009 and decreased to 7.8 in 2017. Only the rate of deaths related to hypertensive disorders showed an increasing tendency. Both the infant and perinatal mortality rates improved (from 3.2 deaths per 1,000 live births in 2009 to 2.8 in 2017 and from 3.5 to 2.7, respectively). Among the external causes of infant mortality, assaults including homicides accounted for 25% (n=150), and this proportion was constant throughout the study period. CONCLUSION: Overall improvements were observed in all maternal, infant, and perinatal mortality measures. In-depth analysis and interventions with respect to certain causes, such as hypertensive disorders in mothers or assaults in infants, should be considered priority issues.

Causes of death among cancer patients in the era of cancer survivorship in Korea: Attention to the suicide and cardiovascular mortality.

BACKGROUND: Improved cancer survival is expected to increase noncancer deaths; however, detailed causes of death have rarely been discussed. Changing landscapes in mortality patterns and noncancer mortality risks in patients with cancer require evaluation. METHODS: We identified cancer and noncancer-related causes of death using data from the 2000-2016 national cancer registry in Korea (n = 2 707 520), and we characterized the leading causes of death and proportionate mortalities over time. Risks of noncancer deaths relative to the general population were estimated using standardized mortality ratios (SMRs). RESULTS: Of 1 105 607 identified deaths, 87% were due to the primary cancer. Proportionate mortalities of primary cancer among overall deaths remained high in patients with liver (86%) and lung (70%) cancers and in female patients with breast cancer (77%), even 5 to 10 years following diagnosis, whereas proportionate mortalities reduced to ≤50% in patients with stomach (men, 39%; women, 48%), prostate (47%), and female thyroid (27%) cancers. Despite the predominance of index cancer deaths, the proportion of noncancer deaths among all deaths increased over time. There was a 20-fold increase in cardiovascular disease deaths among patients with cancer from 2000 to 2016, and the risk of suicide among patients with cancer was higher than that among the general population (SMR: 1.68 [95% confidence interval (CI): 1.63-1.74] in men, SMR: 1.42 [95% CI: 1.33-1.55] in women). CONCLUSIONS: Deaths from primary cancer remain a major concern; however, follow-up is required for both cancer and noncancer-related health issues in cancer survivors, especially concerning suicide and cardiovascular deaths.

A Metal-Like Conductive Elastomer with a Hierarchical Wrinkled Structure.

For the development of wearable electronics, the replacement of rigid, metallic components with fully elastomeric materials is crucial. However, current elastomeric electrodes suffer from low electrical conductivity and poor electrical stability. Herein, a metal-like conductive elastomer with exceptional electrical performance and stability is presented, which is used to fabricate fully elastomeric electronics. The key feature of this material is its wrinkled structure, which is induced by in situ cooperation of solvent swelling and densely packed nanoparticle assembly. Specifically, layer-by-layer assembly of metal nanoparticles and small-molecule linkers on elastomers generates the hierarchical wrinkled elastomer. The elastomer demonstrates remarkable electrical conductivity (170 000 and 11 000 S cm-1 at 0% and 100% strain, respectively), outperforming previously reported elastomeric electrodes based on nanomaterials. Furthermore, a fully elastomeric triboelectric nanogenerator based on wrinkled elastomeric electrode exhibits excellent electric power generation performance due to the compressible, large contact area of the wrinkled surface during periodic contact and separation.

Ebola virus disease outbreak in Korea: use of a mathematical model and stochastic simulation to estimate risk.

OBJECTIVES: According to the World Health Organization, there have been frequent reports of Ebola virus disease (EVD) since the 2014 EVD pandemic in West Africa. We aim to estimate the outbreak scale when an EVD infected person arrives in Korea. METHODS: Western Africa EVD epidemic mathematical model SEIJR or SEIJQR was modified to create a Korean EVD outbreak model. The expected number of EVD patients and outbreak duration were calculated by stochastic simulation under the scenarios of Best case, Diagnosis delay, and Case missing. RESULTS: The 2,000 trials of stochastic simulation for each scenario demonstrated the following results: The possible median number of patients is 2 and the estimated maximum number is 11 when the government intervention is proceeded immediately right after the first EVD case is confirmed. With a 6-day delay in diagnosis of the first case, the median number of patients becomes 7, and the maximum, 20. If the first case is missed and the government intervention is not activated until 2 cases of secondary infection occur, the median number of patients is estimated at 15, and the maximum, at 35. CONCLUSIONS: Timely and rigorous diagnosis is important to reduce the spreading scale of infection when a new communicable disease is inflowed into Korea. Moreover, it is imperative to strengthen the local surveillance system and diagnostic protocols to avoid missing cases of secondary infection.

Optimal Ultrasonographic Measurements for Diagnosing Carpal Tunnel Syndrome in Patients With Diabetic Sensorimotor Polyneuropathy: A Case-Control Study.

OBJECTIVE: To investigate the optimal sonographic method for diagnosing carpal tunnel syndrome (CTS) in patients with diabetic sensorimotor polyneuropathy (DSP). METHODS: A total of 190 participants were divided into four groups based on DSP history and electrodiagnostic results of CTS. The absolute parameters were measured at baseline and the relative values were calculated: maximal cross-sectional area (CSA) of the median nerve throughout the carpal tunnel (Mmax), median nerve CSA at the forearm level (Mf), ulnar nerve CSA at the pisiform level (Upi), difference between Mmax and Mf (∆MM), and difference between Mmax and Upi (∆MU). Then, the optimal ultrasonographic parameters for diagnosing CTS, according to the presence of DSP, using absolute and relative cutoff values were analyzed. RESULTS: Median and ulnar nerve CSAs were significantly larger in the DSP group than in the control group. In the DSP participants, the mean Mmax, ∆MM, and ∆MU values were significantly larger in patients with both DSP and CTS than in patients with DSP only. The Mmax thresholds of 9.5 mm2 in the control group and 11.5 mm2 in the DSP group showed the greatest sensitivity and specificity for diagnosing CTS. The ∆MM thresholds of 2.5 mm2 and ∆MU thresholds of 4.5 mm2 had the greatest sensitivity and specificity in both the DSP and control groups. CONCLUSION: Measurement of Mmax, ∆MM and ∆MU is an optimal ultrasonographic evaluation method for diagnosing CTS in patients with DSP.

Complete Chloroplast Genome of Nicotiana otophora and its Comparison with Related Species.

Nicotiana otophora is a wild parental species of Nicotiana tabacum, an interspecific hybrid of Nicotiana tomentosiformis and Nicotiana sylvestris. However, N. otophora is least understood as an alternative paternal donor. Here, we compared the fully assembled chloroplast (cp) genome of N. otophora and with those of closely related species. The analysis showed a cp genome size of 156,073 bp and exhibited a typical quadripartite structure, which contains a pair of inverted repeats separated by small and large single copies, containing 163 representative genes, with 165 microsatellites distributed unevenly throughout the genome. Comparative analysis of a gene with known function across Nicotiana species revealed 76 protein-coding sequences, 20 tRNA sequences, and 3 rRNA sequence shared between the cp genomes. The analysis revealed that N. otophora is a sister species to N. tomentosiformis within the Nicotiana genus, and Atropha belladonna and Datura stramonium are their closest relatives. These findings provide a valuable analysis of the complete N. otophora cp genome, which can identify species, elucidate taxonomy, and reconstruct the phylogeny of genus Nicotiana.

Phytotoxic mechanisms of bur cucumber seed extracts on lettuce with special reference to analysis of chloroplast proteins, phytohormones, and nutritional elements.

Bioherbicides from plant extracts are an effective and environmentally friendly method to prevent weed growth. The present investigation was aimed at determining the inhibitory effect of bur cucumber seed extracts (BSE) on lettuce plant growth. Bur cucumber seeds were ground with water, and two different concentrations of seed extracts (10% and 20%) were prepared and applied to lettuce plants. Decreased plant height, number of leaves, leaf length, leaf width, anProd. Type: FTPd leaf area were found in lettuce exposed to BSE as compared with controls. A significant reduction in lettuce biomass was observed in 20% BSE-treated plants due to the presence of higher amounts of phenolic content in the extracts. Moreover, a significant inhibitory chemical, 2-linoleoyl glycerol, was identified in BSE extracts. The mechanism of plant growth inhibition was assayed in lettuce proteins by 2-dimensional electrophoresis (2-DE) and the LC-MS/MS method. In total, 57 protein spots were detected in plants treated with 20% BSE and control plants. Among these, 39 proteins were down-regulated and 18 proteins were up-regulated in plants exposed to 20% BSE as compared with controls. The presence of low levels of chlorophyll a/b binding protein and oxygen-evolving enhancer protein 1 in BSE-exposed plants reduced photosynthetic pigment synthesis and might be a reason for stunted plant growth. Indeed, the plant-growth stimulating hormone gibberellin was inhibited, and synthesis of stress hormones such as abscisic acid, jasmonic acid, and salicylic acid were triggered in lettuce by the effects of BSE. Uptake of essential nutrients, Ca, Fe, Mg, K, S, and Mo, was deficient and accumulation of the toxic ions Cu, Zn, and Na was higher in BSE-treated plants. The results of this study suggest that extracts of bur cucumber seeds can be an effective eco-friendly bioherbicide for weed control that work by inhibiting mechanisms of photosynthesis and regulating phytohormones and nutritional elements.

Optimal intervention strategy for prevention tuberculosis using a smoking-tuberculosis model.

In this paper, we developed a dynamic model of smoking-tuberculosis (TB) transmission in South Korea, and investigated the effects of control strategies on the number of incidence of TB using optimal control theory. Model parameters regarding TB and smoking are estimated through least-squares fitting to real data. We considered three TB controls (distancing, case-finding, and case-holding) and two smoking controls (distancing and quitting), in order to minimize the number of exposed and infectious individuals and the cost of control. Numerical simulations for the various control strategies highlight that implementing the smoking controls, not with TB controls, can effectively reduce the incidence of TB transmission.