Performance Validation of Three Scoring Systems for the Prediction of Thrombotic Microangiopathy Due to Severe ADAMTS13 Deficiency and the Response to Therapeutic Plasma Exchange: First Study in Korea.

Background: The BENTLEY score (B-S), French thrombotic microangiopathy (TMA) Reference Center score (FTMA-S), and PLASMIC score (PLASMIC-S) have been developed for TMA diagnostic prediction. We retrospectively validated their predictive performances in patients with severe (<10%) disintegrin and metalloprotease with thrombospondin type 1 motif, member 13 (ADAMTS13) deficiency in terms of the risk of TMA and response to therapeutic plasma exchange (TPE). Methods: The predictive performances of the three scoring systems were compared in 145 patients with suspected TMA who underwent ADAMTS13 activity tests between January 2014 and September 2022. The response to TPE and mortality in TMA-positive patients were compared after risk stratification, using the Mann-Whitney U and Fisher's exact tests. Results: The PLASMIC-S, FTMA-S, and B-S showed area under the curve values of 0.820, 0.636, and 0.513, respectively, for predicting TMA positivity in high-risk patients. The PLASMIC-S showed higher sensitivity (81.8%), negative predictive value (91.2%), positive predictive value (PPV; 66.7%), and accuracy (82.1%) than the FTMA-S (72.7%, 82.1%, 41.0%, and 60.0%, respectively) and B-S (4.6%, 70.2%, 50.0%, and 69.7%, respectively). The PLASMIC-S also showed higher specificity than the FTMA-S (82.2% vs. 54.5%). The modified PLASMIC-S, including lactate dehydrogenase/upper limit of normal ratios, increased the specificity, PPV, and accuracy to 97.0%, 92.3%, and 92.4%, respectively. In TMA-positive patients, high risk assessed by the PLASMIC-S predicted higher platelet recovery rates and less TPE sessions required for recovery than for those assessed at low-to-intermediate risk. Conclusions: PLASMIC-S is the preferred scoring system for detecting patients with TMA positivity and for prognosis before confirmation of ADAMTS13 activity.

Research use only and cell population data items obtained from the Beckman Coulter DxH800 automated hematology analyzer are useful in discriminating MDS patients from those with cytopenia without MDS.

We investigated the performance of research use only/cell population data (RUO/CPD) items obtained from the Beckman Coulter DxH800 automated hematologic analyzer in discriminating MDS patients from cytopenic patients without MDS.Total of 14 routine CBC, 18 research use only (RUO) items, and 70 CPD items were obtained retrospectively at diagnosis. The results were then compared between 94 MDS patients and 100 cytopenic patients without MDS. In items with statistically significant differences, receiver operating characteristic (ROC) analysis was performed and the results were compared.Four CBC/RUO items [red cell distribution width-standard deviation (RDW-SD), immature reticulocyte fraction (IRF), mean sphered cell volume (MSCV), high light scatter reticulocytes (HLR)], and two CPD items [mean volume of neutrophils (NE-V-Mean) and mean volume of early granulated cells (EGC-V-Mean)] showed area-under the curve (AUC) scores > 0.750. Notably, four RUO/CPD items (MSCV > 81.4/HLR > 0.15%/NE-V-Mean > 145/EGC-V-Mean > 156) showed high sensitivity (91.9%/93.6%/88.1%/90.2%, respectively) in discriminating MDS patients from cytopenic patients without MDS. With these six items, scores ≥ 4 (defined as ≥ 4 items exceeding cutoff values out of six items) showed AUC scores/sensitivity/specificity/accuracy (0.891/87.3%/79.0%/83.0%, respectively).Six CBC/RUO/CPD items showed satisfactory AUC scores of > 0.750, and four RUO/CPD items showed high sensitivity in discriminating MDS patients from cytopenic patients without MDS. Scoring system with six items showed high sensitivity, specificity, and accuracy with decision criteria of ≥ 4 scores. Therefore, DxH800 RUO/CPD items would be useful in discriminating MDS patients from cytopenic patients without MDS.

Effect of ß-resin of binderless coke on mechanical properties of high-density carbon blocks at high molding pressure.

High-density carbon blocks have excellent mechanical, thermal, and electrical properties. In particular, these blocks are applied in various fields while maintaining excellent physical properties even in harsh environments. In this study, binderless coke manufactured under certain conditions was used to form green bodies (GBs) under various pressure conditions of 50 to 250 MPa, and the bodies were carbonized to form a high-density carbon block (CB). Then, the effect of the ß-resin and oxygen functional groups of binderless coke on the mechanical properties of the high-density carbon block according to molding pressure was considered. When molding at a pressure of under 200 MPa, the ratio of O and C (O/C) has a greater effect, and the larger the O/C, the higher the mechanical properties. On the other hand, when molding at a high pressure of 250 MPa, the ß-resin content has a greater effect and steadily increases when the ß-resin content is low and when the mechanical properties are sufficiently reduced. In particular, in the case of CB-N7A3-250, which has the highest ß-resin content of 3.7 wt%, the density was 1.79 g/cm3, the flexural strength was 106 MPa, and the shore hardness was 99 HSD.

Preparation of Isotropic Carbon Fibers from Kerosene-Purified Coal Tar Pitch by Co-Carbonization with Pyrolysis Fuel Oil.

An inexpensive and general-purpose carbon fiber was prepared using coal tar pitch. In contrast to the solvent extraction process employing expensive solvents, a low-cost centrifugal separation method facilitated the reduction of loss due to the pitch purification and an overall yield increase. The coal tar pitch purified by centrifugation and subsequently co-carbonized with pyrolysis fuel oil improved in spinnability. Moreover, the resulting spinnable pitch had a softening point of 250 °C. The obtained carbon fibers were heat-treated at 1000 °C for 5 min, resulting in a tensile strength of approximately 1000 MPa and an average diameter of 9 µm. In this study, we present an effective method for obtaining low-cost general-purpose isotropic carbon fibers.

The Effect of Oxygen Content in Binderless Cokes for High-Density Carbon Blocks from Coal Tar Pitch.

High-density carbon blocks are much lighter than metals and have excellent mechanical properties and are one of the materials garnering attention to replace existing metal parts. In this study, a binderless coke was produced by changing the flow rates of nitrogen and air as a carrier gas during heat treatment of coal tar pitch and using this, a green body was formed at 150 MPa and carbonized to produce a high-density carbon block. We express the binderless coke produced in this way by N10A0, N7A3, N5A5, N3A7, N0A10 according to the ratio of nitrogen and air, and in the case of carbon block, we have added CB in front of it. We then considered the effect of oxygen content in the binderless cokes on the optical, chemical, and mechanical properties. It was observed that the produced binderless cokes develop into a dense mosaic structure with a small particle size as the air flow rate increased. To survey the change in oxygen content of the produced binderless coke, O1s and C1s regions were measured using X-ray photoelectric spectroscopy (XPS), and O1s/C1s was calculated. The O1s/C1s ratio steadily increased as the air flow rate increased, and in the case of N0A10, it increased about twice as much as that of N10A0 to 11.20%. ß-resin has a very large effect on the mechanical strength of the carbon block in addition to air in the pitch. And in the case of CB-N0A10, it shows the best mechanical strength with a density of 1.72 g/cm3, bending strength of 87 MPa, and shore hardness of 93 HSD.

Surface oxidation of petroleum pitch to improve mesopore ratio and specific surface area of activated carbon.

In this study, surface oxidation of petroleum pitch was performed to enhance the thermal stability, specific surface area, and mesopore ratio of activated carbon. The oxygen uptake of the pitch by surface oxidation has a strong influence on the formation of the specific surface area and pore size of activated carbon. It was confirmed that the oxygen uptake from the surface to the inner side of the surface oxidized pitch was the highest at the temperature of 330 °C (IP330-AC), with a mesopore ratio of 63.35% and specific surface area of 1811 m2 g-1. The oxygen content of the surface oxidized pitch increased proportionately with the mesopore ratio in activated carbon. The specific surface area and mesopore ratio of IP330-AC were respectively 163% and 487% higher than those of petroleum-based commercial activated carbon (A-BAC), and 102% and 491% higher than those of coconut-based commercial activated carbon (P60).

3D-printed tablets using a single-step hot-melt pneumatic process for poorly soluble drugs.

Main purpose was to evaluate the applicability of a 3D-printer equipped with a hot-melt pneumatic dispenser as a single-step process to prepare tablet dosage forms. Dutasteride, a poorly water-soluble drug, was selected as a model drug. Soluplus®, Kollidon® VA 64, Eudragit® E PO, and hydroxypropyl cellulose (HPC) were premixed as bulking agents prior to printing. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and thermogravimetric analysis (TGA) were utilized to evaluate the physicochemical properties of the 3D-printed tablets. Moreover, different geometries were designed to correlate the surface area/volume (SA/V) of the tablets with respect to their release profiles. As a result, printed dutasteride was confirmed to be in an amorphous state and not recrystallized even after the accelerated storage stability. Out of the four bulking agents, Kollidon® VA 64, enhanced the dissolution of the printed dutasteride, reaching above 80% within 15 min. These results suggest that the hot-melt pneumatic dispenser was efficient in converting the solid state into an amorphous state, which significantly enhanced the dissolution. On the other hand, the tube-shaped 3D-printed tablet exhibited the fastest drug dissolution profile, which had the highest SA/V ratio in comparison to the cube, hemisphere, and pyramid shapes. These results confirm the dependency of the drug dissolution rate not only on its crystallinity but also on the surface area of the 3D-printed tablet. Therefore, a 3D-printer equipped with a hot-melt pneumatic dispenser possesses useful applicability in enhancing drug dissolution, especially for poorly water-soluble drugs, in a single-step process.

Distinct Clinical Features of Plasma Cell Myeloma Patients Exhibiting Dysmorphic Plasma Cells: Association with More Plasma Cells at Diagnosis.

Dysmorphic plasma cells are occasionally found in bone marrow (BM) aspirates of plasma cell myeloma (PCM) patients. We retrospectively analyzed the incidences of significant dysmorphic plasma cells (SDPC) presentations and their associations with clinical features in PCM patients. Total 91 PCM patients diagnosed from January 2013 to December 2017 at author's institution were enrolled. SDPC presentation was determined as ≥ 5% (SDPC5) or ≥ 10% (SDPC10) among total PC and clinical features of PCM patients were compared with respect to SDPC presentation status. Incidence of SDPC5/SDPC10 presentation was 39.6%/18.7%. Patients with SDPC5/SDPC10 showed significantly more BM PC (P = 0.004/0.020) and higher incidences of CKS1B gains (P = 0.022/0.001) and RB1 loss (P = 0.032 for SDPC10 only) at diagnosis than those without SDPC5/SDPC10. Patients with SDPC5/SDPC10 also showed significantly greater absolute BM PC (P = 0.007/0.034 and 0.047/0.049 for 1st and 2nd follow-up, respectively) and serum M-protein (P = 0.041/0.044 and 0.039/0.049 for 1st and 2nd follow-up, respectively) reductions after chemotherapy than those without SDPC5/SDPC10. SDPC5/SDPC10 presentation was confirmed as an independent predictor of BM PC ≥ 37.7% [hazard ratio (HR) 4.649/2.613, P = 0.005/0.039]. Our present study demonstrated that SDPC presentation would be an independent predictor of more BM PC at diagnosis in PCM patients. Associations between SDPC presentation and higher incidence of CKS1B gains and RB1 loss, greater PC/serum monoclonal protein reductions after chemotherapy were also identified. Association between SDPC presentation and favorable treatment response should be evaluated in more comprehensive study.

Performance Evaluation of Automated Immunohematology Analyzer IH-500 for Blood Bank Testing.

The automated immunohematology analyzer IH-500 (Bio-rad, Cressier FR, Switzerland) was developed recently for blood bank tests and this study evaluated performance of IH-500. 200 blood samples for ABO/Rh typing were collected. ABO/Rh typing results measured by IH-500 was compared with conventional manual methods. Antibody screening tests were performed with 100 samples using both IH-500 and the Ortho BioVue System, and results were compared. Antibody identification tests were conducted on 5 samples using both IH-500 and the Ortho BioVue System and results were compared. Crossmatching was performed with both IH-500 and conventional manual tube method using 4 patient serum samples and 10 blood cell donors, and 40 results were compared. Isoagglutinin titer of anti-A and anti-B was determined in 10 samples using both IH-500 and the automated analyzer Ortho AutoVue Innova and concordance rates were obtained. The concordance rates of ABO/Rh typing, antibody screening test, antibody identification test, and crossmatching between comparative manual methods and the IH-500 were all 100%. In the evaluation of isoagglutinin titer, 8 (80.0%) results out of 10 samples (80%) showed results within ± 1 titer between the IH-500 and the AutoVue Innova, which indicates the concordance rates of 80.0%. IH-500 reported results with two titers lower than Ortho AutoVue Innova in two samples. The IH-500 demonstrated good concordance rates and provided reliable results compared to comparative manual methods in the blood bank testing. IH-500 would be useful as a possible replacement for conventionally performed manual methods in blood bank testing.

Comparison of High Sensitivity and Conventional Flow Cytometry for Diagnosing Overt Paroxysmal Nocturnal Hemoglobinuria and Detecting Minor Paroxysmal Nocturnal Hemoglobinuria Clones.

BACKGROUND: High sensitivity flow cytometry (HS-FCM) was recently developed for diagnosing paroxysmal nocturnal hemoglobinuria (PNH). We compared its performance with conventional flow cytometry (C-FCM) for diagnosing overt PNH and detecting minor (0.1-1%) PNH clones in aplastic anemia (AA)/low-grade myelodysplastic syndrome (MDS) patients. METHODS: C-FCM and HS-FCM were performed simultaneously on 41 samples from healthy controls and 23 peripheral blood samples from 15 AA/low-grade MDS and eight PNH patients, using a Navios flow cytometer (Beckman Coulter, Miami, FL, USA). Results were compared. RESULTS: No healthy control samples had PNH clone size >0.01%. For granulocytes, C-FCM detected a smaller PNH clone size than HS-FCM (mean difference: 0.7-1.7%). In AA/low-grade MDS patients, three samples showed >1% PNH clones with C-FCM but not with HS-FCM. Seven samples showed minor PNH clones by C-FCM, but HS-FCM showed negative results for all these samples. In PNH patients, C-FCM detected a smaller PNH clone size than HS-FCM (mean difference: 1.9-5.0%). For red blood cells, C-FCM detected a greater PNH clone size than HS-FCM (mean difference: 1.5%). In AA/low-grade MDS patients, C-FCM showed >1% PNH clones in six samples, but HS-FCM showed >1% PNH clones in none of the samples. C-FCM detected minor PNH clones in nine samples, but six of them were negative by HS-FCM. In PNH patients, C-FCM detected a greater PNH clone size than HS-FCM (mean difference: 2.5%). CONCLUSIONS: HS-FCM can sensitively detect minor PNH clones and reduce false-positive C-FCM minor PNH clone cases in AA/low-grade MDS patients.

Description of Mycobacterium chelonae subsp. bovis subsp. nov., isolated from cattle (Bos taurus coreanae), emended description of Mycobacterium chelonae and creation of Mycobacterium chelonae subsp. chelonae subsp. nov.

Three rapidly growing mycobacterial strains, QIA-37T, QIA-40 and QIA-41, were isolated from the lymph nodes of three separate Korean native cattle, Hanwoo (Bos taurus coreanae). These strains were previously shown to be phylogenetically distinct but closely related to Mycobacterium chelonae ATCC 35752T by taxonomic approaches targeting three genes (16S rRNA, hsp6 and rpoB) and were further characterized using a polyphasic approach in this study. The 16S rRNA gene sequences of all three strains showed 99.7 % sequence similarity with that of the M. chelonae type strain. A multilocus sequence typing analysis targeting 10 housekeeping genes, including hsp65 and rpoB, revealed a phylogenetic cluster of these strains with M. chelonae. DNA-DNA hybridization values of 78.2 % between QIA-37T and M. chelonae indicated that it belongs to M. chelonae but is a novel subspecies distinct from M. chelonae. Phylogenetic analysis based on whole-genome sequences revealed a 95.44±0.06 % average nucleotide identity (ANI) value with M. chelonae, slightly higher than the 95.0 % ANI criterion for determining a novel species. In addition, distinct phenotypic characteristics such as positive growth at 37 °C, at which temperature M. chelonae does not grow, further support the taxonomic status of these strains as representatives of a novel subspecies of M. chelonae. Therefore, we propose an emended description of Mycobacterium chelonae, and descriptions of M. chelonae subsp. chelonae subsp. nov. and M. chelonae subsp. bovis subsp. nov. are presented; strains ATCC 35752T(=CCUG 47445T=CIP 104535T=DSM 43804T=JCM 6388T=NCTC 946T) and QIA-37T (=KCTC 39630T=JCM 30986T) are the type strains of the two novel subspecies.

Changes in ginsenoside patterns of red ginseng extracts according to manufacturing and storage conditions.

Although the pharmacological action of red ginseng is mostly generated by ginsenosides, contents of ginsenosides in manufactured extracts are still varying according to processing and storage conditions. Rg1, Rb1, and Rh1 levels significantly decreased overtime under pH adjustment and thermal treatment during storage, and these changes were exacerbated at lower pH and higher storage temperature. However, Rg3 level showed the opposite pattern compared to other ginsenosides. Rg3 level linearly increased at higher temperature and pH while significantly decreased at pH 2. Furthermore, Rg3 level constantly increased during storage. This is the first combined study on the effects of manufacturing and storage conditions on ginsenoside contents of red-ginseng-extract products. To minimize loss of major marker and bioactive compounds of red ginseng products during manufacturing processes and storage, it is recommended that red-ginseng-extracts be maintained at pH 6-8, sterilized at below 105 °C, and stored at below 25 °C.

Mycobacterium paraintracellulare sp. nov., for the genotype INT-1 of Mycobacterium intracellulare.

Three mycobacterial strains, isolated from independent Korean patients with pulmonary infections, belonging to the Mycobacterium intracellulare genotype 1 (INT-1) were characterized using a polyphasic approach. The sequences of the 16S rRNA gene and internal transcribed spacer 1 (ITS1) of the INT-1 strains were identical to those of Mycobacterium intracellulare ATCC 13950T. However, multilocus sequence typing (MLST) analysis targeting five housekeeping genes (hsp65, rpoB, argG, gnd and pgm) revealed the phylogenetic separation of these strains from M. intracellulare ATCC 13950T. DNA-DNA hybridization values of >70 % confirmed that the three isolates belong to the same species, while the values of <70 % between one of them and the type strains of M. intracellulare and Mycobacterium chimaera confirmed their belonging to a distinct species. In addition, phenotypic characteristics such as positive growth on MacConkey agar and in acidic broth culture, unique matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) MS profiles of lipids, and unique mycolic acids profiles further supported the taxonomic status of these strains as representatives of a novel species of the Mycobacterium avium complex named Mycobacterium paraintracellulare. The type strain is MOTT64T (=KCTC 29084T=JCM 30622T).

Ligularia fischeri extract attenuates liver damage induced by chronic alcohol intake.

Context Ligularia fischeri (Ledebour) Turcz. (Compositae) has been used as a leafy vegetable and in traditional medicine to treat hepatic disorder in East Asia. Objective The present study explores the antioxidant activity of LF aqueous extract on EtOH-induced oxidative stress accompanied by hepatotoxicity both in vitro and in vivo. Materials and methods In vitro study using the mouse liver NCTC-1469 cell line was conducted to estimate the cytotoxicity as well as the inhibitory effect of LF extract against alcohol-treated cell damage. In vivo study used an alcohol-fed Wister rat model orally administered EtOH (3.95 g/kg of body weight/d) with or without LF extract (100 or 200 mg/kg body weight) for 6 weeks. Serum and liver tissue were collected to evaluate hepatic injury and antioxidant-related enzyme activity. Results The EC50 value for the DPPH radical scavenging capacity of LF extract was 451.5 µg/mL, whereas the IC50 value of LF extract in terms of EtOH-induced reactive oxygen species (ROS) generation was 98.3 µg/mL without cell cytotoxicity. LF extract (200 mg/kg body weight) significantly reduced the triglyceride content of serum (33%) as well as hepatic lipid peroxidation (36%), whereas SOD activity was elevated three-fold. LF extract suppressed expression of CYP2E1 and TNF-α, and attenuated alcohol-induced abnormal morphological changes. Discussion and conclusion LF extract attenuated liver damage induced by alcoholic oxidative stress through inhibition of ROS generation, down-regulation of CYP2E1, and activation of hepatic antioxidative enzymes. Homeostasis of the antioxidative defence system in the liver by LF extract mitigated hepatic disorder following chronic alcohol intake.

Mycobacterium anyangense sp. nov., a rapidly growing species isolated from blood of Korean native cattle, Hanwoo (Bos taurus coreanae).

From the whole blood of Korean native cattle, Hanwoo (Bos taurus coreanae), a previously undescribed, rapidly growing, scotochromogenic isolate of the genus Mycobacterium is reported. Its 16S rRNA gene sequence, and the sequences of three other genes (hsp65, recA and rpoB) were unique and phylogenetic analysis based on 16S rRNA gene sequence (1420 bp) placed the organism into the rapidly growing Mycobacterium group close to Mycobacterium smegmatis (98.5% sequence similarity). However, phylogenetic analyses based on three different gene sequences (hsp65, recA and rpoB) revealed its location to be distinct from the branch of rapidly growing species. Culture and biochemical characteristics were generally similar to those of Mycobacterium fortuitum. Unique matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) MS profiles of lipids, unique fatty acid profile, unique mycolic acids profiles and a low DNA-DNA relatedness to M. fortuitum (23.6%) and M. smegmatis (39.7%) strongly supported the taxonomic status of this strain as a representative of a novel species of rapidly growing mycobacteria named Mycobacterium anyangense. The type strain is strain QIA-38(T) ( = JCM 30275(T) = KCTC 29443(T)).

Relationship between prenatal and postnatal exposures to folate and risks of allergic and respiratory diseases in early childhood.

BACKGROUND: It is uncertain whether folate is risk or preventive factor for allergic and respiratory diseases. OBJECTIVE: To determine the relationship between maternal or offspring folate status and subsequent development of allergic and respiratory diseases in early childhood. METHODS: In total, 917 mother-child pairs from a prospective birth cohort in South Korea were studied. Data regarding the children's allergic and respiratory outcomes were obtained from standardized questionnaires completed by the mothers at postnatal months 6, 12, and 24. Serum folate levels were measured in the mothers at mid- and late-pregnancy, and in their children at 24 months of age. Atopic biomarkers were measured in the cord blood (CB) and at 24 months after birth. Biomarkers and clinical outcomes were analyzed and compared between the mother-child pairs divided into two groups according to median serum folate status at mid- and late-pregnancy. RESULTS: Serum folate levels during mid-pregnancy were inversely associated with CB eosinophil count (adjusted odds ratio [OR] 0.72, 95% confidence interval [CI], 0.54-0.96) and positively associated with CB interleukin-10 levels (1.47, 1.11-1.94). Maternal folate level above the median value (≥9.5 ng/ml) during mid-pregnancy was associated with a decreased risk for the child of lower respiratory tract infections (LRTIs) at 6 months of age (adjusted OR 0.50, 95% CI 0.28-0.91) and atopic dermatitis (AD) at 24 months (adjusted OR 0.52, 95% CI 0.31-0.88), but not with LRTIs and AD at other ages. CONCLUSIONS: A relatively high maternal serum folate level in mid-pregnancy was associated with a decreased risk of LRTIs and AD in early childhood.