Development of a zinc chloride-based chemo-mechanical system for potential minimally invasive dental caries removal system.

Background/purpose: The chemo-mechanical caries-removal technique is known to offer advantages of selective dentin caries treatment while leaving healthy dental tissues intact. However, current sodium hypochlorite based reagents usually excessively damage dentin collagen. Therefore, the purpose of this study was to develop a novel chemo-mechanical caries-removal system to preserve the collagen network for subsequent prosthetic restorations. Materials and methods: The calfskin-derived collagen was chosen as a model system to investigate the dissolution behavior of collagen under different operating conditions of chemical-ultrasonic treatment systems. The molecular weight, triple-helix structure, the morphology, and functional group of collagen after treatment were investigated. Results: Various concentrations of sodium hypochlorite or zinc chloride together with ultrasonic machinery were chosen to investigate. The outcomes of circular dichroism (CD) spectra demonstrated stability of the triple-helix structure after treatment of a zinc chloride solution. In addition, two apparent bands at molecular weights (MWs) of 130 and 121 kDa evidenced the stability of collagen network. The positive 222 nm and 195 nm negative CD absorption band indicated the existence of a triple-helix structure for type I collagen. The preservation of the morphology and functional group of the collagen network on the etched dentin surface were investigated by in vitro dentin decalcification model. Conclusion: Unlike NaOCl, the 5 wt% zinc chloride solution combined with ultra-sonication showed dissolution rather than denature as well as degradation of the dentin collagen network. Additional in vivo evaluations are needed to verify its usefulness in clinical applications.

Aquaporin-8 promotes human dermal fibroblasts to counteract hydrogen peroxide-induced oxidative damage: A novel target for management of skin aging.

The skin is subjected to various external factors that contribute to aging including oxidative stress from hydrogen peroxide (H2O2). This study investigated the distribution of aquaporin-8 (AQP8), a protein that transports H2O2 across biological membranes, in skin cells, and its effects in mitigating H2O2-induced oxidative damage. Human dermal fibroblasts were treated with increasing concentrations of H2O2 to evaluate oxidative damage. Cell viability, reactive oxygen species (ROS) generation, and the expression of specific genes associated with skin aging (IL-10, FPR2, COL1A1, KRT19, and Aggrecan) were evaluated and AQP8 expression was assessed via quantitative polymerase chain reaction and western blotting. Small-interfering RNA was used to silence the AQP8 gene and evaluate its significance. The results show that H2O2 treatment reduces cell viability and increases ROS generation, leading to oxidative damage that affects the expression of target molecules. Interestingly, H2O2-treated cells exhibit high levels of AQP8 expression and gene silencing of AQP8 reverses high levels of ROS and low levels of COL1A1, KRT19, and Aggrecan expression in stressed cells, indicating that AQP8 plays a vital role in preventing oxidative damage and consequent aging. In conclusion, AQP8 is upregulated in human dermal fibroblasts during H2O2-induced oxidative stress and may help prevent oxidative damage and aging. These findings suggest that AQP8 could be a potential therapeutic target for skin aging. Further research is necessary to explore the feasibility of using AQP8 as a preventive or therapeutic strategy for maintaining skin health.

Effect of various post-curing light intensities, times, and energy levels on the color of 3D-printed resin crowns.

Background/purpose: Current 3D-printing technology has been widely used for creating dental resin restorations. This study aimed to evaluate the effect of light intensity, time, and energy post-curing on the surface color of 3D-printed resin crowns. However, the influences of post-curing parameters on the restoration after printing still need to be explored. Therefore, this project investigates the effect of post-cure conditions on resin color. Materials and methods: Specimens from single-crown (SC) and pontic (PO) specimens underwent post-curing at various light intensities (105, 210, 420, 630, and 860 mW/cm2) for 5, 10, and 15 min. Specimens were observed at three predetermined points and measured using a commercial spectrophotometer that utilizes the CIE Lab∗ color space. Subsequently, samples were analyzed for color differences (ΔE). Results: ΔE color differences in evaluated samples were influenced by the light intensity, time, and energy post-curing. SC samples showed a significant color difference (P < 0.05), with the lowest value at 5 min of 16 (860 mW/cm2), while 10 and 15 min had a difference of 4 (210 mW/cm2). PO samples exhibited a significant decrease in the color difference (P < 0.05) at 5 and 10 min of 16 (860 mW/cm2), and at 15 min of 12 (630 mW/cm2). Conclusion: The results of this study indicate that exposing a resin crown to a high light intensity results in color stability and allows shorter post-curing times.

Applying machine learning to assess the morphology of sculpted teeth.

Background/purpose: Producing tooth crowns through dental technology is a basic function of dentistry. The morphology of tooth crowns is the most important parameter for evaluating its acceptability. The procedures were divided into four steps: tooth collection, scanning skills, use of mathematical methods and software, and machine learning calculation. Materials and methods: Dental plaster rods were prepared. The effective data collected were to classify 121 teeth (15th tooth position), 342 teeth (16th tooth position), 69 teeth (21st tooth position), and 89 teeth (43rd tooth position), for a total of 621 teeth. The procedures are divided into four steps: tooth collection, scanning skills, use of mathematical methods and software, and machine learning calculation. Results: The area under the curve (AUC) value was 0, 0.5, and 0.72 in this study. The precision rate and recall rate of micro-averaging/macro-averaging were 0.75/0.73 and 0.75/0.72. If we took a newly carved tooth picture into the program, the current effectiveness of machine learning was about 70%-75% to evaluate the quality of tooth morphology. Through the calculation and analysis of the two different concepts of micro-average/macro-average and AUC, similar values could be obtained. Conclusion: This study established a set of procedures that can judge the quality of hand-carved plaster sticks and teeth, and the accuracy rate is about 70%-75%. It is expected that this process can be used to assist dental technicians in judging the pros and cons of hand-carved plaster sticks and teeth, so as to help dental technicians to learn the tooth morphology more effectively.

Evaluation of the efficiency, trueness, and clinical application of novel artificial intelligence design for dental crown prostheses.

OBJECTIVE: The unique structure of human teeth limits dental repair to custom-made solutions. The production process requires a lot of time and manpower. At present, artificial intelligence (AI) has begun to be used in the medical field and improve efficiency. This study attempted to design a variety of dental restorations using AI and evaluate their clinical applicability. METHODS: Using inlay and crown restoration types commonly used in dental standard models, we compared differences in artificial wax-up carving (wax-up), artificial digital designs (digital) and AI designs (AI). The AI system was designed using computer calculations, and the other two methods were designed by humans. Restorations were made by 3D printing resin material. Image evaluations were compared with cone beam computed tomography (CBCT) by calculating the root mean squared error. RESULTS: Surface truth results showed that AI (68.4 µm) and digital-designed crowns (51.0 µm) had better reproducibility. Using AI for the crown reduced the time spent by 400% (compared to digital) and 900% (compared to wax-up). Optical microscopic and CBCT images showed that AI and digital designs had close margin gaps (p < 0.05). The margin gap of the crown showed that the wax-up group was 4.1 and 4.3 times greater than those of the AI and digital crowns, respectively. Therefore, the utilization of artificial intelligence can assist in the production of dental restorations, thereby enhancing both production efficiency and accuracy. SIGNIFICANCE: It is expected that the development of AI can contribute to the reproducibility, efficiency, and goodness of fit of dental restorations.

Comparative analysis of bonding strength between enamel and overlay of varying thicknesses following an aging test.

Abstract: Background/purpose: Overlay restorations can be used clinically as a treatment option to preserve natural dentine. However, whether the residual enamel thickness and overlay thickness affect the adhesion between the restoration and tooth is still unknown. This study was to investigate effects of the overlay thickness and residual enamel thickness on bonding strength. Materials and methods: Overlays of different thicknesses were prepared with natural teeth which had 2, 4, and 6 mm of occlusal reduction (n = 10). Specimens were subjected to 10,000 cycles in water at 5-55 °C, and finally compressive strength tests were used to evaluate the bonding strength. Results: All groups showed good bond strength (P > 0.05). The overlay restorations of different thicknesses reduced the preparation amount by 30.3%-7.2% and significantly preserved more of the tooth structure (P < 0.005). Compared to the control group, the overlay restoration increased the marginal fitness by about 0.67-0.88 times. The thermal cycling indicated that the decrease in the maximum bearing stress was due to the aging of the ceramic itself. Therefore, the thickness of the overlay had a greater influence on the compressive strength than the bond strength. Conclusion: Based on the above this study recommends an overlay thickness of at least 2 mm in clinical practice. The aging test confirmed that adhesion between the overlay and teeth was quite firm and stable. This shows that a stable adhesive effect of the overlay can be used as a treatment option for preserving a greater amount of a tooth's structure.

Integrins and Actions of Androgen in Breast Cancer.

Androgen has been shown to regulate male physiological activities and cancer proliferation. It is used to antagonize estrogen-induced proliferative effects in breast cancer cells. However, evidence indicates that androgen can stimulate cancer cell growth in estrogen receptor (ER)-positive and ER-negative breast cancer cells via different types of receptors and different mechanisms. Androgen-induced cancer growth and metastasis link with different types of integrins. Integrin αvß3 is predominantly expressed and activated in cancer cells and rapidly dividing endothelial cells. Programmed death-ligand 1 (PD-L1) also plays a vital role in cancer growth. The part of integrins in action with androgen in cancer cells is not fully mechanically understood. To clarify the interactions between androgen and integrin αvß3, we carried out molecular modeling to explain the potential interactions of androgen with integrin αvß3. The androgen-regulated mechanisms on PD-L1 and its effects were also addressed.

Surface modification of zirconia ceramics through cold plasma treatment and the graft polymerization of biomolecules.

Background/purpose: Although zirconia ceramics were highly versatile as dental implants, their long-term presence in the human body may slow down healing and impede cell growth in the past. To enhance the cytocompatibility of zirconia ceramics, surface activation modification was used to immobilize biopolymers such that a biomimetic environment was created. Materials and methods: Hexamethyldisilazane thin films were deposited onto the surface of inorganic zirconia through cold plasma treatment under various power and deposition time settings to form an organosilane interface layer. Next, oxygen plasma treatment was performed to activate the free radicals on the surface. Subsequently, ultraviolet light was employed to graft and polymerize acrylic acid for generating carboxyl groups on the surface. This was followed by a condensation reaction with biopolymers (chitosan, chitosan/poly-γ-glutamic acid, and gelatin). Results: Under a 20-min deposition time at 40 W and 150 mTorr, the thin films had a maximum graft density of 2.1 mg/cm2. MG-63 cells (human osteosarcoma cells) were employed to evaluate cell compatibility. Chitosan and chitosan/poly-γ-glutamic acid promoted the compatibility of MG-63 cells (a human osteosarcoma cell line) with zirconia ceramics, whereas gelatin reduced this compatibility. Conclusion: The findings confirm that cold plasma treatment and graft polymerization can promote the immobilization of biomolecules and improve the biocompatibility of zirconia ceramics. This approach can be applied to the modification of zirconia ceramic implants.

In Vivo Evaluation of the Effects of Sintering Temperature on the Optical Properties of Dental Glass-Ceramics.

In prosthodontics, the ability of glass-ceramics to express the optical properties of natural teeth is an important goal of esthetic restorations. Dental restorations do not merely need to be similar in color to natural teeth; proper optical properties, such as opalescence, transparency, etc., must be combined in order to achieve excellent esthetic effects. The optical properties of ceramic materials are mainly distinguished by different hues (e.g., A, B, C, and D) combined with translucency (e.g., high translucency (HT), medium translucency (MT), low translucency (LT), and medium opacity (MO)). However, there are many varieties of tooth color. Therefore, it is expected that glass-ceramics can change their nanocrystal size and porosity through different heat-treatment temperatures and times and, thereby, present different transparency effects. This study mainly analyzed the influence of changes in sintering temperature on the optical properties of glass-ceramics. The optical properties of glass-ceramics in the oral cavity were evaluated with human trials. We hypothesized that (1) the transparency of glass-ceramics can be changed by controlling the sintering temperature and (2) glass-ceramics modified by the sintering temperature can be suitable for clinical applications. Results showed that the transparency decreased, the nanoparticle size increased, the crystallinity increased, and the surface hardness decreased as the sintering temperature increased. High-brightness glass-ceramics have more-sensitive optical properties. Results of clinical trials showed that glass-ceramics whose transparency was changed by controlling the sintering temperature can be candidates for clinical applications. Based on the above results, the hypotheses of this study were supported. In the future, we will continue to explore the esthetic field of dental restorations.

The power of heteronemin in cancers.

Heteronemin (Haimian jing) is a sesterterpenoid-type natural marine product that is isolated from sponges and has anticancer properties. It inhibits cancer cell proliferation via different mechanisms, such as reactive oxygen species (ROS) production, cell cycle arrest, apoptosis as well as proliferative gene changes in various types of cancers. Recently, the novel structure and bioactivity evaluation of heteronemin has received extensive attention. Hormones control physiological activities regularly, however, they may also affect several abnormalities such as cancer. L-Thyroxine (T4), steroid hormones, and epidermal growth factor (EGF) up-regulate the accumulation of checkpoint programmed death-ligand 1 (PD-L1) and promote inflammation in cancer cells. Heteronemin suppresses PD-L1 expression and reduces the PD-L1-induced proliferative effect. In the current review, we evaluated research and evidence regarding the antitumor effects of heteronemin and the antagonizing effects of non-peptide hormones and growth factors on heteronemin-induced anti-cancer properties and utilized computational molecular modeling to explain how these ligands interacted with the integrin αvß3 receptors. On the other hand, thyroid hormone deaminated analogue, tetraiodothyroacetic acid (tetrac), modulates signal pathways and inhibits cancer growth and metastasis. The combination of heteronemin and tetrac derivatives has been demonstrated to compensate for anti-proliferation in cancer cells under different circumstances. Overall, this review outlines the potential of heteronemin in managing different types of cancers that may lead to its clinical development as an anticancer agent.

Cancer Cytotoxicity of a Hybrid Hyaluronan-Superparamagnetic Iron Oxide Nanoparticle Material: An In-Vitro Evaluation.

While hyaluronic acid encapsulating superparamagnetic iron oxide nanoparticles have been reported to exhibit selective cytotoxicity toward cancer cells, it is unclear whether low-molecular-weight hyaluronic acid-conjugated superparamagnetic iron oxide nanoparticles also display such cytotoxicity. In this study, high-molecular-weight hyaluronic acid was irradiated with γ-ray, while Fe3O4 nanoparticles were fabricated using chemical co-precipitation. The low-molecular-weight hyaluronic acid and Fe3O4 nanoparticles were then combined according to a previous study. Size distribution, zeta potential, and the binding between hyaluronic acid and iron oxide nanoparticles were examined using dynamic light scattering and a nuclear magnetic resonance spectroscopy. The ability of the fabricated low-molecular-weight hyaluronic acid conjugated superparamagnetic iron oxide nanoparticles to target cancer cells was examined using time-of-flight secondary ion mass spectrometry and T2* weighted magnetic resonance images to compare iron signals in U87MG human glioblastoma and NIH3T3 normal fibroblast cell lines. Comparison showed that the present material could target U87MG cells at a higher rate than NIH3T3 control cells, with a viability inhibition rate of 34% observed at day two and no cytotoxicity observed in NIH3T3 normal fibroblasts during the three-day experimental period. Supported by mass spectrometry images confirming that the nanoparticles accumulated on the surface of cancer cells, the fabricated materials can reasonably be suggested as a candidate for both magnetic resonance imaging applications and as an injectable anticancer agent.

Heteronemin and tetrac derivatives suppress non-small cell lung cancer growth via ERK1/2 inhibition.

The most common cancer, lung cancer, causes deaths worldwide. Most lung cancer patients have non-small cell lung carcinomas (NSCLCs) with a poor prognosis. The chemotherapies frequently cause resistance therefore search for new effective drugs for NSCLC patients is an urgent and essential issue. Deaminated thyroxine, tetraiodothyroacetic acid (tetrac), and its nano-analogue (NDAT) exhibit antiproliferative properties in several types of cancers. On the other hand, the most abundant secondary metabolite in the sponge Hippospongia sp., heteronemin, shows effective cytotoxic activity against different types of cancer cells. In the current study, we investigated the anticancer effects of heteronemin against two NSCLC cell lines, A549 and H1299 cells in vitro. Combined treatment with heteronemin and tetrac derivatives synergistically inhibited cancer cell growth and significantly modulated the ERK1/2 and STAT3 pathways in A549 cells but only ERK1/2 in H1299 cells. The combination treatments induce apoptosis via the caspases pathway in A549 cells but promote cell cycle arrest via CCND1 and PCNA inhibition in H1299 cells. In summary, these results suggest that combined treatment with heteronemin and tetrac derivatives could suppress signal transduction pathways essential for NSCLC cell growth. The synergetic effects can be used potentially as a therapeutic procedure for NSCLC patients.

Comparison of 2,3,5,4'-tetrahydroxystilbene-2-O-b-D-glucoside-induced proliferation and differentiation of dental pulp stem cells in 2D and 3D culture systems-gene analysis.

BACKGROUND/PURPOSE: Culture environments play a critical role in stem cell expansion. This study aimed to evaluate the effects of 2,3,5,4'-tetrahydroxystilbene-2-O-b-D-glucoside (THSG) on the proliferation and differentiation of human dental pulp stem cells (DPSCs) in 2-dimensional (2D) and 3-dimensional (3D) culture systems. MATERIALS AND METHODS: Human DPSCs were seeded in T25 flasks for 2D cultivation. For the 3D culture system, DPSCs were mixed with microcarriers and cultured in spinner flasks. Cells in both culture systems were treated with THSG, and cell proliferation was determined using a cell counter and a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide assay. In THSG-treated DPSCs, the genes associated with proliferation, adipogenesis, neurogenesis, osteogenesis, pluripotency, oncogenesis, and apoptosis were analyzed using real-time polymerase chain reactions. RESULTS: The spinner flask time-dependently improved cell numbers, cell viability, and expansion rates in THSG-treated DPSCs. In both the T25 and spinner flasks, the messenger RNA (mRNA) levels of proliferation, osteogenesis, and pluripotent-related genes had a significant maximum expression with 10 µM THSG treatment. However, 0.1 µM of THSG may be the most suitable condition for triggering neurogenesis and adipogenesis gene expression when DPSCs were cultured in spinner flasks. Furthermore, the number of oncogenes and apoptotic genes decreased considerably in the presence of THSG in both the T25 and spinner flasks. CONCLUSION: The spinner flask bioreactor combined with THSG may upregulate proliferation and lineage-specific differentiation in DPSCs. Thus, the combination can be used to mass-produce and cultivate human DPSCs for regenerative dentistry.

The Review of Bioeffects of Static Magnetic Fields on the Oral Tissue-Derived Cells and Its Application in Regenerative Medicine.

Magnets have been widely used in dentistry for orthodontic tooth movement and denture retention. Nevertheless, criticisms have arisen regarding the biosafety of static magnetic field (SMF) effects on surrounding tissues. Various controversial pieces of evidence have been discussed regarding SMFs on cellular biophysics, but little consensus has been reached, especially in the field of dentistry. Thus, the present paper will first review the safe use of SMFs in the oral cavity and as an additive therapy to orthodontic tooth movement and periodontium regeneration. Then, studies regarding SMF-incorporated implants are reviewed to investigate the advantageous effects of SMFs on osseointegration and the underlying mechanisms. Finally, a review of current developments in dentistry surrounding the combination of magnetic nanoparticles (MNPs) and SMFs is made to clarify potential future clinical applications.

Effect of Estrogen on Heteronemin-Induced Anti-proliferative Effect in Breast Cancer Cells With Different Estrogen Receptor Status.

Estrogen (E2) has multiple functions in breast cancers including stimulating cancer growth and interfering with chemotherapeutic efficacy. Heteronemin, a marine sesterterpenoid-type natural product, has cytotoxicity on cancer cells. Breast cancer cell lines, MCF-7 and MDA-MB-231, were used for investigating mechanisms involved in inhibitory effect of E2 on heteronemin-induced anti-proliferation in breast cancer cells with different estrogen receptor (ER) status. Cytotoxicity was detected by cell proliferation assay and flow cytometry, gene expressions were determined by qPCR, mechanisms were investigated by Western blot and Mitochondrial ROS assay. Heteronemin exhibited potent cytotoxic effects against both ER-positive and ER-negative breast cancer cells. E2 stimulated cell growth in ER-positive breast cancer cells. Heteronemin induced anti-proliferation via suppressing activation of ERK1/2 and STAT3. Heteronemin suppressed E2-induced proliferation in both breast cancer cells although some gene expressions and anti-proliferative effects were inhibited in the presence of E2 in MCF-7 and MDA-MB-231 cells with a higher concentration of heteronemin. Heteromenin decreased the Bcl-2/Bax ratio to inhibit proliferation in MDA-MB-231 but not in MCF-7 cells. Both heteronemin and E2 increased mitochondrial reactive oxygen species but combined treatment reversed superoxide dismutase (SOD)s accumulation in MCF-7 cells. Heteronemin caused G0/G1 phase arrest and reduced the percentage of cells in the S phase to suppress cancer cell growth. In conclusion, Heteronemin suppressed both ER-positive and ER-negative breast cancer cell proliferation. Interactions between E2 and heteronemin in signal transduction, gene expressions, and biological activities provide insights into the complex pathways by which anti-proliferation is induced by heteronemin in E2-replete environments.

Estimation of the Effect of Accelerating New Bone Formation of High and Low Molecular Weight Hyaluronic Acid Hybrid: An Animal Study.

Osteoconduction is an important consideration for fabricating bio-active materials for bone regeneration. For years, hydroxyapatite and ß-calcium triphosphate (ß-TCP) have been used to develop bone grafts for treating bone defects. However, this material can be difficult to handle due to filling material sagging. High molecular weight hyaluronic acid (H-HA) can be used as a carrier to address this problem and improve operability. However, the effect of H-HA on bone formation is still controversial. In this study, low molecular weight hyaluronic acid (L-HA) was fabricated using gamma-ray irradiation. The viscoelastic properties and chemical structure of the fabricated hybrids were evaluated by a rheological analysis nuclear magnetic resonance (NMR) spectrum. The L-MH was mixed with H-HA to produce H-HA/L-HA hybrids at ratios of 80:20, 50:50 and 20:80 (w/w). These HA hybrids were then combined with hydroxyapatite and ß-TCP to create a novel bone graft composite. For animal study, artificial bone defects were prepared in rabbit femurs. After 12 weeks of healing, the rabbits were scarified, and the healing statuses were observed and evaluated through micro-computer tomography (CT) and tissue histological images. Our viscoelastic analysis showed that an HA hybrid consisting 20% H-HA is sufficient to maintain elasticity; however, the addition of L-HA dramatically decreases the dynamic viscosity of the HA hybrid. Micro-CT images showed that the new bone formations in the rabbit femur defect model treated with 50% and 80% L-HA were 1.47 (p < 0.05) and 2.26 (p < 0.01) times higher than samples filled with HA free bone graft. In addition, a similar tendency was observed in the results of HE staining. These results lead us to suggest that the material with an H-HA/L-HA ratio of 50:50 exhibited acceptable viscosity and significant new bone formation. Thus, it is reasonable to suggest that it may be a potential candidate to serve as a supporting system for improving the operability of granular bone grafts and enhancing new bone formations.

2,3,5,4'-tetrahydroxystilbene-2-O-ß-D-glucoside-stimulated dental pulp stem cells-derived conditioned medium enhances cell activity and anti-inflammation.

BACKGROUND/PURPOSE: Dental pulp stem cells (DPSCs) contribute to the regeneration of various tissues and have superior proliferation, immune privilege, and anti-inflammation properties to other mesenchymal stem cells. 2,3,5,4'-tetrahydroxystilbene-2-O-ß-D-glucoside (THSG) not only enhances the aforementioned properties of DPSCs but also promotes self-renewal and reprogramming-like ability. However, whether THSG enhances the aforementioned properties and abilities through direct or indirect interaction mechanisms remains unclear. To address this knowledge gap, we examined the effects of THSG-stimulated DPSC-derived conditioned medium (THSG-CM) on the activity and anti-inflammation properties of cells. MATERIALS AND METHODS: DPSCs were treated with various concentrations of THSG to produce THSG-CM, which was then collected, analyzed, and lyophilized. A cytokine profiling antibody assay was used to compare protein components between THSG-treated and nontreated CM. Human skin fibroblasts (HSFs) and human gingival fibroblasts (HGFs) were used to investigate the effect of THSG-CM on cell proliferation, anti-inflammation, and wound healing abilities; for this investigation, MTS assay, quantitative real-time PCR analysis, and 2-well silicone inserts wound model were conducted. RESULTS: We observed that THSG enhanced the secretion of growth- and immune-associated proteins in THSG-CM and increased the proliferation of HSFs and HGFs. Furthermore, THSG-CM significantly attenuated lipopolysaccharide-stimulated mRNA levels of cytokines in both cells and improved wound healing abilities. CONCLUSION: We conclude that THSG-CM had more beneficial effects on cell activity and anti-inflammation in the HSFs and HGFs than DPSC-derived CM. DPSC-derived CM can be developed into a cell-free regenerative strategy in the future, and its therapeutic efficacy may be improved by THSG-CM.

2,3,5,4'-tetrahydroxystilbene-2-O-b-D-glucoside triggers the pluripotent-like possibility of dental pulp stem cells by activating the JAK2/STAT3 axis: Preliminary observations.

Abstract. BACKGROUND/PURPOSE: Although 2,3,5,4'-Tetrahydroxystilbene-2-O-beta-glucoside (THSG) reportedly has anti-inflammatory properties, its role in inducing the dedifferentiation of human dental pulp stem cells (DPSC) into pluripotent-like stem cells remains to be determined. The purpose of this study is to evaluate the effects of THSG on the pluripotent-like possibility and mechanism of DPSC. MATERIALS AND METHODS: DPSCs were treated with THSG, and cell viability was determined using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTS) assay. Real-time polymerase chain reaction was used to analyze the mRNA expression levels of pluripotency-associated genes and oncogenes and to detect telomerase activity in the cells. Embryoid body formation assay was conducted, and pluripotency-related proteins were identified using Western blotting. Data were analyzed using one-way analysis of variance. RESULTS: Cell viability, telomerase activity, and embryoid body formation were enhanced in THSG-treated DPSCs. The mRNA expression levels of pluripotent-like genes (including Nanog homeobox [NANOG], SRY-box 2 [SOX2], and POU class 5 homeobox 1 [POU5F1/OCT4]) significantly increased after THSG treatment. The expression levels of pluripotency-related genes (Janus kinase-signal transducer 2 [JAK2] and signal transducer and activator of transcription 3 [STAT3]) increased, whereas those of oncogenes (Ras, SRC, HER2, and C-sis) decreased. Furthermore, the expression levels of the phosphorylated JAK2 and STAT3 proteins significantly increased after THSG treatment. CONCLUSION: THSG treatment may enhance the pluripotent-like possibility of DPSC through the JAK2/STAT3 axis. Hence, it may be used as an alternative cell-based therapeutic strategy in regenerative dentistry.

Antioxidants protect against gingival overgrowth induced by cyclosporine A.

OBJECTIVE: We investigated the importance of reactive oxygen species (ROS) on developing gingival overgrowth (GO) and then introduced the antioxidant strategy to prevent, or even reduce GO. BACKGROUND: Gingival overgrowth is a common side effect of the patients receiving cyclosporine A (CsA), an immune suppressant. Although it has been broadly investigated, the exact pathogenesis of the induced GO is still uncertain. METHODS: We cultured human primary gingival fibroblasts and used animal model of GO to investigate the ameliorative effects of antioxidants on CsA-induced GO. To examine the CsA-induced oxidative stress, associated genes and protein expression, and the overgrown gingiva of rats by using immunocytochemistry, confocal laser scanning microscopy, real-time PCR, ELISA, gelatin zymography, gingival morphological, and immunohistochemical analysis. RESULTS: We found for the first time that ROS was responsible for the CsA-induced oxidative stress and TGF-ß1 expression in human primary gingival fibroblasts, as well as the GO of rats. The antioxidants (oxidative scavenger of vitamin E and an antioxidative enzyme inducer of hemin) ameliorated CsA-induced pathological and morphological alterations of GO without affected the CsA-suppressed il-2 expression in rats. CsA-induced oxidative stress, HO-1, TGF-ß1, and type II EMT were also rescued by antioxidants treatment. CONCLUSIONS: We concluded that CsA repetitively stimulating the production of ROS is the cause of CsA-GO which is ameliorated by treating antioxidants, including vitamin E and sulforaphane. Furthermore, the immunosuppressive effect of CsA is not interfered by antioxidant treatments in rats. This finding may thus help the clinician devise better prevention strategies in patients susceptible to GO.