RESUMEN
Gene therapy is emerging as a powerful tool to modulate abnormal gene expression, a hallmark of most CNS disorders. The transformative potentials of recently approved gene therapies for the treatment of spinal muscular atrophy (SMA), amyotrophic lateral sclerosis (ALS) and active cerebral adrenoleukodystrophy are encouraging further development of this approach. However, most attempts to translate gene therapy to the clinic have failed to make it to market. There is an urgent need not only to tailor the genes that are targeted to the pathology of interest but to also address delivery challenges and thereby maximize the utility of genetic tools. In this Review, we provide an overview of gene therapy modalities for CNS diseases, emphasizing the interconnectedness of different delivery strategies and routes of administration. Important gaps in understanding that could accelerate the clinical translatability of CNS genetic interventions are addressed, and we present lessons learned from failed clinical trials that may guide the future development of gene therapies for the treatment and management of CNS disorders.
Asunto(s)
Enfermedades del Sistema Nervioso Central , Terapia Genética , Humanos , Terapia Genética/métodos , Terapia Genética/tendencias , Enfermedades del Sistema Nervioso Central/terapia , Enfermedades del Sistema Nervioso Central/genética , Animales , Investigación Biomédica Traslacional/métodos , Técnicas de Transferencia de Gen/tendenciasRESUMEN
The ability to selectively bind to antigenic peptides and secrete effector molecules can define rare and low-affinity populations of cells with therapeutic potential in emerging T cell receptor (TCR) immunotherapies. We leverage cavity-containing hydrogel microparticles, called nanovials, each coated with peptide-major histocompatibility complex (pMHC) monomers to isolate antigen-reactive T cells. T cells are captured and activated by pMHCs inducing the secretion of effector molecules including IFN-γ and granzyme B that are accumulated on nanovials, allowing sorting based on both binding and function. The TCRs of sorted cells on nanovials are sequenced, recovering paired αß-chains using microfluidic emulsion-based single-cell sequencing. By labeling nanovials having different pMHCs with unique oligonucleotide-barcodes and secretions with oligo-barcoded detection antibodies, we could accurately link TCR sequences to specific targets and rank each TCR based on the corresponding cell's secretion level. Using the technique, we identified an expanded repertoire of functional TCRs targeting viral antigens with high specificity and found rare TCRs with activity against cancer-specific splicing-enhanced epitopes.
Asunto(s)
Receptores de Antígenos de Linfocitos T , Linfocitos T , Péptidos/química , Antígenos de Histocompatibilidad/química , AntígenosRESUMEN
INTRODUCTION: Intravesical drug delivery (IDD) has gained recognition as a viable approach for treating bladder-related diseases over the years. However, it comes with its set of challenges, including voiding difficulties and limitations in mucosal and epithelial penetration. These challenges lead to drug dilution and clearance, resulting in poor efficacy. Various strategies for drug delivery have been devised to overcome these issues, all aimed at optimizing drug delivery. Nevertheless, there has been minimal translation to clinical settings. AREAS COVERED: This review provides a detailed description of IDD, including its history, advantages, and challenges. It also explores the physical barriers encountered in IDD, such as voiding, mucosal penetration, and epithelial penetration, and discusses current strategies for overcoming these challenges. Additionally, it offers a comprehensive roadmap for advancing IDD into clinical trials. EXPERT OPINION: Physical bladder barriers and limitations of conventional treatments result in unsatisfactory efficacy against bladder diseases. Nevertheless, substantial recent efforts in this field have led to significant progress in overcoming these challenges and have raised important attributes for an optimal IDD system. However, there is still a lack of well-defined steps in the workflow to optimize the IDD system for clinical settings, and further research is required to establish more comprehensive in vitro and in vivo models to expedite clinical translation.
Asunto(s)
Sistemas de Liberación de Medicamentos , Vejiga Urinaria , Administración Intravesical , Preparaciones FarmacéuticasRESUMEN
The ability to selectively bind to antigenic peptides and secrete cytokines can define populations of cells with therapeutic potential in emerging T cell receptor (TCR) immunotherapies. We leverage cavity-containing hydrogel microparticles, called nanovials, each coated with millions of peptide-major histocompatibility complex (pMHC) monomers to isolate antigen-reactive T cells. T cells are captured and activated by pMHCs and secrete cytokines on nanovials, allowing sorting based on both affinity and function. The TCRs of sorted cells on nanovials are sequenced, recovering paired αß-chains using microfluidic emulsion-based single-cell sequencing. By labeling nanovials having different pMHCs with unique oligonucleotide-barcodes we could link TCR sequence to targets with 100% accuracy. We identified with high specificity an expanded repertoire of functional TCRs targeting viral antigens compared to standard techniques.
RESUMEN
Techniques to analyze and sort single cells based on functional outputs, such as secreted products, have the potential to transform our understanding of cellular biology as well as accelerate the development of next-generation cell and antibody therapies. However, secreted molecules rapidly diffuse away from cells, and analysis of these products requires specialized equipment and expertise to compartmentalize individual cells and capture their secretions. Herein, we describe methods to fabricate hydrogel-based chemically functionalized microcontainers, which we call nanovials, and demonstrate their use for sorting single viable cells based on their secreted products at high-throughput using only commonly accessible laboratory infrastructure. These nanovials act as solid supports that facilitate attachment of a variety of adherent and suspension cell types, partition uniform aqueous compartments, and capture secreted proteins. Solutions can be exchanged around nanovials to perform fluorescence immunoassays on secreted proteins. Using this platform and commercial flow sorters, we demonstrate high-throughput screening of stably and transiently transfected producer cells based on relative IgG production. Chinese hamster ovary cells sorted based on IgG production regrew and maintained a high secretion phenotype over at least a week, yielding >40% increase in bulk IgG production rates. We also sorted hybridomas and B lymphocytes based on antigen-specific antibody production. Hybridoma cells secreting an antihen egg lysozyme antibody were recovered from background cells, enriching a population of â¼4% prevalence to >90% following sorting. Leveraging the high-speed sorting capabilities of standard sorters, we sorted >1 million events in <1 h. IgG secreting mouse B cells were also sorted and enriched based on antigen-specific binding. Successful sorting of antibody-secreting B cells combined with the ability to perform single-cell RT-PCR to recover sequence information suggests the potential to perform antibody discovery workflows. The reported nanovials can be easily stored and distributed among researchers, democratizing access to high-throughput functional cell screening.
Asunto(s)
Hidrogeles , Análisis de la Célula Individual , Cricetinae , Ratones , Animales , Células CHO , Hidrogeles/metabolismo , Cricetulus , Hibridomas , Análisis de la Célula Individual/métodos , Antígenos/metabolismo , Inmunoglobulina G/metabolismo , Citometría de Flujo/métodosRESUMEN
Production of high-energy lipids by microalgae may provide a sustainable energy source that can help tackle climate change. However, microalgae engineered to produce more lipids usually grow slowly, leading to reduced overall yields. Unfortunately, culture vessels used to select cells based on growth while maintaining high biomass production, such as well plates, water-in-oil droplet emulsions, and nanowell arrays, do not provide production-relevant environments that cells experience in scaled-up cultures (e.g., bioreactors or outdoor cultivation farms). As a result, strains that are developed in the laboratory may not exhibit the same beneficial phenotypic behavior when transferred to industrial production. Here, we introduce PicoShells, picoliter-scale porous hydrogel compartments, that enable >100,000 individual cells to be compartmentalized, cultured in production-relevant environments, and selected based on growth and bioproduct accumulation traits using standard flow cytometers. PicoShells consist of a hollow inner cavity where cells are encapsulated and a porous outer shell that allows for continuous solution exchange with the external environment. PicoShells allow for cell growth directly in culture environments, such as shaking flasks and bioreactors. We experimentally demonstrate that Chlorella sp., Saccharomyces cerevisiae, and Chinese hamster ovary cells, used for bioproduction, grow to significantly larger colony sizes in PicoShells than in water-in-oil droplet emulsions (P < 0.05). We also demonstrate that PicoShells containing faster dividing and growing Chlorella clonal colonies can be selected using a fluorescence-activated cell sorter and regrown. Using the PicoShell process, we select a Chlorella population that accumulates chlorophyll 8% faster than does an unselected population after a single selection cycle.
Asunto(s)
Técnicas de Cultivo de Célula , Ensayos Analíticos de Alto Rendimiento/métodos , Nanopartículas , Nanotecnología , Animales , Biocombustibles , Células CHO , Cricetulus , Citometría de Flujo , Microalgas/metabolismo , Técnicas Analíticas MicrofluídicasRESUMEN
INTRODUCTION AND HYPOTHESIS: The aims of this study were to evaluate the effectiveness of gelatin methacryloyl as an adjunct to anterior vaginal wall injury with or without vaginal mesh compared with traditional repair with suture. METHODS: Virginal cycling Hartley strain guinea pigs (n = 60) were randomized to undergo surgical injury and repair using either polyglactin 910 suture or gelatin methacryloyl for epithelium re-approximation or anterior colporrhaphy with mesh augmentation using either polyglactin 910 suture or gelatin methacryloyl for mesh fixation and epithelium re-approximation. Noninjured controls (n = 5) were also evaluated. After 4 days, 4 weeks, or 3 months, tissues were analyzed by hematoxylin & eosin in addition to immunolabeling for macrophages, leukocytes, smooth muscle, and fibroblasts. RESULTS: Surgical injury repaired with suture was associated with increased inflammation and vessel density compared with gelatin methacryloyl. Vimentin and α-smooth muscle actin expression were increased with gelatin methacryloyl at 4 days (p = 0.0026, p = 0.0272). There were no differences in changes in smooth muscle or overall histomorphology after 3 months between the two closure techniques. Mesh repair with suture was also associated with increased inflammation and vessel density relative to gelatin methacryloyl. Quantification of collagen content by picrosirius red staining revealed increased thick collagen fibers throughout the implanted mesh with gelatin methacryloyl compared with suture at 4 weeks (0.62 ± 0.01 µm2 vs 0.55 ± 0.01, p = 0.018). Even at the long-term time point of 3 months, mesh repair with suture resulted in a profibrotic encapsulation of the mesh fibers, which was minimal with gelatin methacryloyl. Smooth muscle density was suppressed after mesh implantation returning to baseline levels at 3 months regardless of fixation with suture or gelatin methacryloyl. CONCLUSIONS: These results suggest that gelatin methacryloyl might be a safe alternative to suture for epithelium re-approximation and anchoring of prolapse meshes to the vagina and may improve chronic inflammation in the vaginal wall associated with mesh complications.
Asunto(s)
Prolapso de Órgano Pélvico , Mallas Quirúrgicas , Animales , Femenino , Cobayas , Colágeno/metabolismo , Gelatina , Hidrogeles , Inflamación , Complicaciones Intraoperatorias , Metacrilatos , Prolapso de Órgano Pélvico/cirugía , Poliglactina 910/metabolismo , Mallas Quirúrgicas/efectos adversos , Vagina/metabolismo , Vagina/cirugíaRESUMEN
Microparticles with defined shapes and spatial chemical modification can interface with cells and tissues at the cellular scale. However, conventional methods to fabricate shaped microparticles have trade-offs between the throughput of manufacture and the precision of particle shape and chemical functionalization. Here, we achieved scalable production of hydrogel microparticles at rates of greater than 40 million/hour with localized surface chemistry using a parallelized step emulsification device and temperature-induced phase-separation. The approach harnesses a polymerizable polyethylene glycol (PEG) and gelatin aqueous two-phase system (ATPS) which conditionally phase separates within microfluidically generated droplets. Following droplet formation, phase separation is induced and phase separated droplets are subsequently cross-linked to form uniform crescent and hollow shell particles with gelatin functionalization on the boundary of the cavity. The gelatin localization enabled deterministic cell loading in subnanoliter-sized crescent-shaped particles, which we refer to as nanovials, with cavity dimensions tuned to the size of cells. Loading on nanovials also imparted improved cell viability during analysis and sorting using standard fluorescence activated cell sorters, presumably by protecting cells from shear stress. This localization effect was further exploited to selectively functionalize capture antibodies to nanovial cavities enabling single-cell secretion assays with reduced cross-talk in a simplified format.
Asunto(s)
Gelatina , Hidrogeles , Hidrogeles/química , Polietilenglicoles/químicaRESUMEN
Cerebrovascular ischemia from intracranial atherosclerosis remains difficult to treat. Although current revascularization procedures, including intraluminal stents and extracranial to intracranial bypass, have shown some benefit, they suffer from perioperative and postoperative morbidity. To address these limitations, here we developed a novel approach that involves gluing of arteries and subsequent transmural anastomosis from the healthy donor into the ischemic recipient. This approach required an elastic vascular sealant with distinct mechanical properties and adhesion to facilitate anastomosis. We engineered two hydrogel-based glues: an elastic composite hydrogel based on methacryloyl elastin-like polypeptide (mELP) combined with gelatin methacryloyl (GelMA) and a stiff glue based on pure GelMA. Two formulations with distinct mechanical characteristics were necessary to achieve stable anastomosis. The elastic GelMA/mELP composite glue attained desirable mechanical properties (elastic modulus: 288 ± 19 kPa, extensibility: 34.5 ± 13.4%) and adhesion (shear strength: 26.7 ± 5.4 kPa) to the blood vessel, while the pure GelMA glue exhibited superior adhesion (shear strength: 49.4 ± 7.0 kPa) at the cost of increased stiffness (elastic modulus: 581 ± 51 kPa) and reduced extensibility (13.6 ± 2.5%). The in vitro biocompatibility tests confirmed that the glues were not cytotoxic and were biodegradable. In addition, an ex vivo porcine anastomosis model showed high arterial burst pressure resistance of 34.0 ± 7.5 kPa, which is well over normal (16 kPa), elevated (17.3 kPa), and hypertensive crisis (24 kPa) systolic blood pressures in humans. Finally, an in vivo swine model was used to assess the feasibility of using the newly developed two-glue system for an endovascular anastomosis. X-ray imaging confirmed that the anastomosis was made successfully without postoperative bleeding complications and the procedure was well tolerated. In the future, more studies are required to evaluate the performance of the developed sealants under various temperature and humidity ranges.
RESUMEN
Bioprinting has emerged as an advanced method for fabricating complex 3D tissues. Despite the tremendous potential of 3D bioprinting, there are several drawbacks of current bioinks and printing methodologies that limit the ability to print elastic and highly vascularized tissues. In particular, fabrication of complex biomimetic structure that are entirely based on 3D bioprinting is still challenging primarily due to the lack of suitable bioinks with high printability, biocompatibility, biomimicry, and proper mechanical properties. To address these shortcomings, in this work the use of recombinant human tropoelastin as a highly biocompatible and elastic bioink for 3D printing of complex soft tissues is demonstrated. As proof of the concept, vascularized cardiac constructs are bioprinted and their functions are assessed in vitro and in vivo. The printed constructs demonstrate endothelium barrier function and spontaneous beating of cardiac muscle cells, which are important functions of cardiac tissue in vivo. Furthermore, the printed construct elicits minimal inflammatory responses, and is shown to be efficiently biodegraded in vivo when implanted subcutaneously in rats. Taken together, these results demonstrate the potential of the elastic bioink for printing 3D functional cardiac tissues, which can eventually be used for cardiac tissue replacement.
Asunto(s)
Bioimpresión/métodos , Elastina , Impresión Tridimensional , Proteínas Recombinantes , Animales , Elasticidad , Humanos , Miocardio/citología , RatasRESUMEN
In this paper, we demonstrate the seeded growth of graphene under a plasma chemical vapor deposition condition. First, we fabricate graphene nanopowders (~5 nm) by ball-milling commercial multi-wall carbon nanotubes. The graphene nanoparticles were subsequently subject to a direct current plasma generated in a 100 Torr 10%CH4 - 90%H2 gas mixture. The plasma growth enlarged, over one hour, the nuclei to graphene sheets larger than one hundred nm(2) in area. Characterization by electron and X-ray diffraction, high-resolution transmission electron microscopy images provide evidence for the presence of monolayer graphene sheets.
RESUMEN
Evidence is presented in this paper that certain single-wall carbon nanotubes are not seamless tubes, but rather adopt a graphene helix resulting from the spiral growth of a nano-graphene ribbon. The residual traces of the helices are confirmed by high-resolution transmission electron microscopy and atomic force microscopy. The analysis also shows that the tubular graphene material may exhibit a unique armchair structure and the chirality is not a necessary condition for the growth of carbon nanotubes. The description of the structure of the helical carbon nanomaterials is generalized using the plane indices of hexagonal space groups instead of using chiral vectors. It is also proposed that the growth model, via a graphene helix, results in a ubiquitous structure of single-wall carbon nanotubes.
RESUMEN
In a previous report, we showed that fibroblast growth factor-2 (FGF-2) is a signal produced by epidermal placode cells during feather development and that this growth factor can induce feathers in scaleless mutant skins that fail to form feathers due to a defective epidermis (Song et al., [1996] Proc Natl Acad Sci USA 93:10246-10249). Here, we test whether FGF-2 is sufficient to induce dermal condensations, structures that normally form under the control of signals from the epidermal placode and are identified on the basis of aggregation of cells, the expression of FGF receptor-1 and bone morphogenetic protein-2 transcripts and the cessation of proliferation of the condensed cells. By using denuded 8-day scaleless dermis as a test system, we have established that FGF-2 is sufficient to induce dermal condensation. We suggest that the primary effect of FGF-2 is an increase in cellular density mediated through cell migration, followed by the expression of dermal condensation-specific genes and cessation of cell proliferation. The FGF-2 effect can be abolished by heparin, suggesting the involvement of heparan sulfate proteoglycans (HSPGs) in growth factor signaling. The spatiotemporal expression of syndecan-3 during feather development suggests that this cell-surface HSPG may be involved in the response of competent embryonic skin dermis to FGF-2.
Asunto(s)
Dermis/embriología , Dermis/fisiología , Plumas/embriología , Plumas/fisiología , Factor 2 de Crecimiento de Fibroblastos/metabolismo , Animales , Movimiento Celular/fisiología , Embrión de Pollo , Pollos , Dermis/citología , Plumas/citología , Fibrinolíticos/farmacología , Heparina/farmacología , Glicoproteínas de Membrana/metabolismo , Proteoglicanos/metabolismo , Transducción de Señal/efectos de los fármacos , Transducción de Señal/fisiología , Sindecano-3RESUMEN
Syndecan-4 and integrins are the primary transmembrane receptors of focal adhesions in cells adherent to extracellular matrix molecules. Syndesmos is a cytoplasmic protein that interacts specifically with the cytoplasmic domain of syndecan-4, and it co-localizes with syndecan-4 in focal contacts. In the present study we sought possible interactors with syndesmos. We find that syndesmos interacts with the focal adhesion adaptor protein paxillin. The binding of syndesmos to paxillin is direct, and these interactions are triggered by the activation of protein kinase C. Syndesmos also binds the paxillin homolog, Hic-5. The connection of syndecan-4 with paxillin through syndesmos parallels the connection between paxillin and integrins and may thus reflect the cooperative signaling of these two receptors in the assembly of focal adhesions and actin stress fibers.