Comparison of medical students' perceptions of patient safety: Focusing on simulation training using a high-fidelity simulator.

Patient safety education is necessary for the provision of high-quality medical services. A significant aspect of patient safety education is simulation training, which allows medical students to experience realistic clinical environments. This study aimed to verify the effectiveness of patient safety education using simulation training. We retrospectively analyzed the results of a 30-question questionnaire survey on the perceptions of patient safety before and after simulation training, which was completed by 40 medical students who participated in clinical practice between June and December 2021. A paired t-test was performed by calculating the mean and standard deviation for each item. We found that students' overall perceptions of patient safety improved after training. Specifically, after simulation training, attitudes toward patient safety were maintained at the same level as before training, while students' self-efficacy of patient safety increased. Simulation training is effective in improving students' perceptions of patient safety, and increasing students' confidence can improve their clinical performance. To maintain this effect, repeated learning is required, and theoretical classes and simulation training should be used appropriately for patient safety education in the future.

Trends in the detection of viruses causing gastroenteritis over a 10-year period and impact of nonpharmaceutical interventions.

BACKGROUND: Viral gastroenteritis continues to be a leading cause of death in low-income countries. The impact of nonpharmaceutical interventions (NPIs) on the transmission of gastroenteritis-causing viruses during the COVID-19 pandemic is understudied. OBJECTIVES: To investigate the 10-year trends of enteric viruses and estimate the impact of implementing and mitigating NPIs. STUDY DESIGN: Data regarding norovirus, rotavirus, adenovirus, astrovirus, and sapovirus detection were collected from five Korean hospitals between January 2013 and April 2023. We compared positivity between the pre-pandemic, pandemic, and post-pandemic periods. The causal effects of implementing and mitigating NPIs were quantified using the Bayesian Structural Time Series (BSTS) model. RESULTS: Norovirus was most frequently detected (9.9 %), followed by rotavirus (6.7 %), adenovirus (3.3 %), astrovirus (1.4 %), and sapovirus (0.6 %). During the pandemic, the positivity of all five viruses decreased, ranging from -1.0 % to -8.1 %, with rotavirus showing the greatest decrease. In the post-pandemic period, positivity rebounded for all viruses except for rotavirus. The BSTS model revealed that NPI implementation negatively affected the detection of all five viruses, resulting in reductions ranging from -73.0 % to -91.0 % compared to the prediction, with rotavirus being the least affected. Conversely, NPI mitigation positively affected the detection of all viruses, ranging from 79.0 % to 200.0 %, except for rotavirus. CONCLUSIONS: Trends observed over 10 years show that NPIs have had a major impact on changes in enteric virus detection. The effect of vaccines, in addition to NPIs, on rotavirus detection requires further investigation. Our findings emphasize the importance of NPIs in infection control and prevention.

Immobilization of Silver(I) Ions on Amino-Functionalized Chromium(III) Terephthalate with Organophosphine and its C-H Carboxylation of a Heteroaromatic Compound.

A newly designed heterogenized catalyst that incorporates silver(I) ions with 2-(dicyclohexylphosphaneyl)acetaldehyde (PCy2 aldehyde) into amino-functionalized chromium(III) terephthalate is developed. Silver(I) ions were robustly immobilized on the amino-functionalized chromium(III) terephthalate, which contains an imine bond formed by the reaction with PCy2 aldehyde. The Ag(I) ion is coordinated with the phosphine in the imine group to create MIL-101-AP(Ag). Characterizations were carefully carried out according to the synthetic steps. The catalytic performance of MIL-101-AP(Ag) was evaluated through the C-H carboxylation of thiophene-2-carbonitrile, achieving a 10 % yield with a turnover number of 1.0. The recyclability of the MIL-101-AP(Ag) catalyst was successfully demonstrated with five cycle, with no loss in activity and selectivity observed. This approach, which involves the formation of an imine bond to facilitate silver loading with phosphine on amino-functionalized MIL-101(Cr), exhibits significant potential for both CO2 fixation and C-H carboxylation, thereby highlighting the modified material's promise as a sustainable catalyst.

Separation of High-Purity C2H2 from Binary C2H2/CO2 Using Robust Al-Based MOFs Comprising Nitrogen-Containing Heterocyclic Dicarboxylate.

In this study, three nitrogen-containing aluminum-based metal-organic frameworks (Al-MOFs), namely, CAU-10pydc, MOF-303, and KMF-1, were investigated for the efficient separation of a C2H2/CO2 gas mixture. Among these three Al-MOFs, KMF-1 demonstrated the highest selectivity for C2H2/CO2 separation (6.31), primarily owing to its superior C2H2 uptake (7.90 mmol g-1) and lower CO2 uptake (2.82 mmol g-1) compared to that of the other two Al-MOFs. Dynamic breakthrough experiments, using an equimolar binary C2H2/CO2 gas mixture, demonstrated that KMF-1 achieved the highest separation performance. It yielded 3.42 mmol g-1 of high-purity C2H2 (>99.95%) through a straightforward desorption process under He purging at 298 K and 1 bar. To gain insights into the distinctive characteristics of the pore surfaces of structurally similar CAU-10pydc and KMF-1, we conducted computational simulations using canonical Monte Carlo and dispersion-corrected density functional theory methods. These simulations revealed that the secondary amine (C2N-H) groups in KMF-1 played a more significant role in differentiating between C2H2 and CO2 compared to that of the N atoms in CAU-10pydc and MOF-303. Consequently, KMF-1 emerged as a promising adsorbent for the separation of high-purity C2H2 from binary C2H2/CO2 gas mixtures.

Performance Evaluation of the Roche Cobas 5800 HBV and HCV Tests: Comparison of the 200 and 500 µL Protocols.

Background: Clinical management of patients infected with hepatitis B virus (HBV) or hepatitis C virus (HCV) relies on the viral load (VL). The Cobas 5800 system (Roche Diagnostics) can determine VLs in 200 and 500 µL samples, but the performance of each protocol has not been compared. We evaluated the performance of both protocols for the HBV and HCV tests. Methods: Precision and linearity were verified using commercial panels. Probit analyses were used to determine limits of detection (LoDs). The results obtained with 336 samples were compared using the 200 and 500 µL protocols. Data from 6,737 retrospective HBV and 768 HCV samples were compared to estimate the effects of the different LoDs on the diagnostic results of the protocols. Correlations between protocols were tested with Spearman's rank correlation coefficients (rho). Results: The precision and linearity of both protocols were verified. The LoDs for the 200 and 500 µL protocols were 6.5 and 2.7 IU/mL for HBV and 29.7 and 8.2 IU/mL for HCV, respectively. The agreement between the protocols ranged from 0.8 to 1.0. The results obtained with the HBV and HCV tests showed a strong correlation (rho=0.994). Only 0.4% of HBV and 0.4% of HCV test results were affected by the LoDs of the 200 µL protocol. Conclusions: The Cobas 5800 200 and 500 µL protocols for the HBV DNA and HCV RNA tests demonstrated excellent performance. These findings establish the 200 µL protocol as a new option for low-volume samples, especially for pediatric and difficult-to-bleed patients.

Variant Analysis of the Thymidine Kinase and DNA Polymerase Genes of Herpes Simplex Virus in Korea: Frequency of Acyclovir Resistance Mutations.

The thymidine kinase (TK) and DNA polymerase (pol) genes of the herpes simplex viruses type 1 (HSV-1) and type 2 (HSV-2) are two important genes involved in antiviral resistance. We investigated the genetic polymorphisms of the HSV-TK and pol genes in clinical isolates from Korean HSV-infected patients using next-generation sequencing (NGS) for the first time in Korea. A total of 81 HSV-1 and 47 HSV-2 isolates were examined. NGS was used to amplify and sequence the TK and pol genes. Among the 81 HSV-1 isolates, 12 and 17 natural polymorphisms and 9 and 23 polymorphisms of unknown significance in TK and pol were found, respectively. Two HSV-1 isolates (2.5%) exhibited the E257K amino acid substitution in TK, associated with antiviral resistance. Out of 47 HSV-2 isolates, 8 natural polymorphisms were identified in TK, and 9 in pol, with 13 polymorphisms of unknown significance in TK and 10 in pol. No known resistance-related mutations were observed in HSV-2. These findings contribute to our understanding of the genetic variants associated with antiviral resistance in HSV-1 and HSV-2 in Korea, with frequencies of known antiviral resistance-related mutations of 2.5% and 0% in HSV-1 and HSV-2, respectively.

Design of Pore Properties of an Al-Based Metal-Organic Framework for the Separation of an Ethane/Ethylene Gas Mixture via Ethane-Selective Adsorption.

A series of Al-based isomorphs (CAU-10H, MIL-160, KMF-1, and CAU-10pydc) were synthesized using isophthalic acid (ipa), 2,5-furandicarboxylic acid (fdc), 2,5-pyrrole dicarboxylic acid (pyrdc), and 3,5-pyridinedicarboxylic acid (pydc), respectively. These isomorphs were systematically investigated to identify the best adsorbent for effectively separating C2H6/C2H4. All CAU-10 isomorphs exhibited preferential adsorption of C2H6 over that of C2H4 in mixture. CAU-10pydc exhibited the best C2H6/C2H4 selectivity (1.68) and the highest C2H6 uptake (3.97 mmol g-1) at 298 K and 1 bar. In the breakthrough experiment using CAU-10pydc, 1/1 (v/v) and 1/15 (v/v) C2H6/C2H4 gas mixtures were successfully separated into high-purity C2H4 (>99.95%), with remarkable productivities of 14.0 LSTP kg-1 and 32.0 LSTP kg-1, respectively, at 298 K. Molecular simulations revealed that the exceptional separation performance of CAU-10pydc originated from the increased porosity and reduced electron density of the pyridine ring of pydc, leading to a relatively larger decrease in π-π interactions with C2H4 than in the C-H···π interactions with C2H6. This study demonstrates that the pore size and geometry of the CAU-10 platform are modulated by the inclusion of heteroatom-containing benzene dicarboxylate or heterocyclic rings of dicarboxylate-based organic linkers, thereby fine-tuning the C2H6/C2H4 separation ability. CAU-10pydc was determined to be an optimum adsorbent for this challenging separation.

Tracking the Genomic Evolution of SARS-CoV-2 for 29 Months in South Korea.

The pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has continued, with the persistent emergence of variants of concern (VOCs). Therefore, this study aimed to track the genomic evolution of SARS-CoV-2 strains by sequencing the spike protein for 29 months, which accounted for the majority of the COVID-19 pandemic period. A total of 109 swabs from patients with confirmed coronavirus disease 2019 (COVID-19) infection were randomly collected between March 2020 and July 2022. After genomic sequencing, we analyzed the naming systems and phylogenetic trees. Five surge peaks of COVID-19 cases have been reported in South Korea, resulting in 14,000,000 cumulative confirmed cases and 17,000 deaths. Among the sequenced samples, 34 wild-type strains and 75 VOCs, including 4 Alpha, 33 Delta, 2 Epsilon, and 36 Omicron VOCs, were identified. Omicron strains were comprised of 8 BA.1.1 (21 K), 27 BA.2 (21 L), and 1 BA.2.12.1 (22C). Phylogenetic analysis of the identified isolates and representative sequences of SARS-CoV-2 strains revealed clusters that presented the WHO VOCs. Specific or unique mutations for each VOC waxed and waned according to the variant waves. Our findings allowed recognition of the overall trends of SARS-CoV-2 isolates, which implicated replication advantage, immune evasion, and disease management.

Comparison of Nasal Swabs, Nasopharyngeal Swabs, and Saliva Samples for the Detection of SARS-CoV-2 and other Respiratory Virus Infections.

Background: Nasal swabs and saliva samples are being considered alternatives to nasopharyngeal swabs (NPSs) for detecting severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2); however, few studies have compared the usefulness of nasal swabs, NPSs, and saliva samples for detecting SARS-CoV-2 and other respiratory virus infections. We compared the positivity rates and concentrations of viruses detected in nasal swabs, NPSs, and saliva samples using cycle threshold (Ct) values from real-time PCR tests for respiratory viruses. Methods: In total, 236 samples (48 five-rub and 10 10-rub nasal swabs, 96 NPSs collected using two different products, 48 saliva swabs, and 34 undiluted saliva samples) from 48 patients (34 patients with SARS-CoV-2 and 14 with other respiratory virus infections) and 40 samples from eight healthy controls were obtained. The PCR positivity and Ct values were compared using Allplex Respiratory Panels 1/2/3 and Allplex SARS-CoV-2 real-time PCR. Results: NPSs showed the lowest Ct values (indicating the highest virus concentrations); however, nasal and saliva samples yielded positive results for SARS-CoV-2 and other respiratory viruses. The median Ct value for SARS-CoV-2 E gene PCR using nasal swab samples collected with 10 rubs was significantly different from that obtained using nasal swabs collected with five rubs (Ct=24.3 vs. 28.9; P=0.002), but not from that obtained using NPSs. Conclusions: Our results confirm that the NPS is the best sample type for detecting respiratory viruses, but nasal swabs and saliva samples can be alternatives to NPSs. Vigorously and sufficiently rubbed nasal swabs can provide SARS-CoV-2 concentrations similar to those obtained with NPSs.

Development and Characterization of Synthetic Norovirus RNA for Use in Molecular Detection Methods.

Background: Reference materials are essential for the quality assurance of molecular detection methods. We developed and characterized synthetic norovirus GI and GII RNA reference materials. Methods: Norovirus GI and GII RNA sequences including the ORF1-ORF2 junction region were designed based on 1,495 reported norovirus sequences and synthesized via plasmid preparation and in vitro transcription. The synthetic norovirus GI and GII RNAs were evaluated using six commercial norovirus detection kits used in Korea and subjected to homogeneity and stability analyses. A multicenter study involving five laboratories and using four commercial real-time PCR norovirus detection assays was conducted for synthetic norovirus RNA characterization and uncertainty measurements. Results: The synthetic norovirus GI and GII RNAs were positively detected using the six commercial norovirus detection kits and were homogeneous and stable for one year when stored at -20°C or -70°C. All data from the five laboratories were within a range of 1.0 log copies/µL difference for each RNA, and the overall mean concentrations for norovirus GI and GII RNAs were 7.90 log copies/µL and 6.96 log copies/µL, respectively. Conclusions: The synthetic norovirus GI and GII RNAs are adequate for quality control based on commercial molecular detection reagents for noroviruses with high sequence variability. The synthetic RNAs can be used as reference materials in norovirus molecular detection methods.

An Amine-Functionalized Ultramicroporous Metal-Organic Framework for Postcombustion CO2 Capture.

Among the most promising methods by which to capture CO2 from flue gas, the emission of which has accelerated global warming, is energy-efficient physisorption using metal-organic framework (MOF) adsorbents. Here, we present a novel cuprous-based ultramicroporous MOF, Cu(adci)-2 (adci- = 2-amino-4,5-dicyanoimidazolate), which was rationally synthesized by combining two strategies to design MOF physisorbents for enhanced CO2 capturing, i.e., aromatic amine functionalization and the introduction of ultramicroporosity (pore size <7 Å). Synchrotron powder X-ray diffraction and a Rietveld analysis reveal that the Cu(adci)-2 structure has one-dimensional square-shaped channels, in each of which all affiliated ligands, specifically NH2 groups at the 2-position of the imidazolate ring, have the same orientation, with a pair of NH2 groups therefore facing each other on opposite sides of the channel walls. While Cu(adci)-2 exhibits a high CO2 adsorption capacity (2.01 mmol g-1 at 298 K and 15 kPa) but a low zero-coverage isosteric heat of adsorption (27.5 kJ mol-1), breakthrough experiments under dry and 60% relative humidity conditions show that its CO2 capture ability is retained even in the presence of high amounts of moisture. In a Monte Carlo simulation and a radial distribution analysis, the preferential CO2 binding site of Cu(adci)-2 was predicted to be between two ligands, forming a sandwich-like structure and implying that its CO2 adsorption properties originate from the enhancement of Lewis base-acid and London dispersion interactions due to the amino groups and ultramicroporosity, respectively.

Comparison of Four Swab and Transport Media Combinations for the Detection of Respiratory Viruses.

BACKGROUND: We compared four combinations of nasopharyngeal swabs and transport media for their ability to transfer and recover viruses under different storage conditions. METHODS: Each swab was immersed in culture supernatants of influenza A virus (IAV), respiratory syncytial virus, and adenovirus, placed in transport medium, and stored at -20℃, +4℃, +20 to 25℃, and +37℃ for 5 days. On each day, virus culture and real-time PCR were performed for each virus. RESULTS: All samples under different storage conditions showed positive results up to 5 days using both virus culture and real-time PCR. Real-time PCR showed that samples stored at -20℃, 4℃, and 20 - 25℃ were within two cycle thresholds (Cts) up to 5 days, but IAV at 37℃ showed that viral titer decreased after 3 days. CONCLUSIONS: Our results indicate that these swab and transport media maintained the stability of the above viruses for 5 days at room temperature, refrigerated, and frozen storage conditions.

High-Performance Adsorbent for Ethane/Ethylene Separation Selected through the Computational Screening of Aluminum-Based Metal-Organic Frameworks.

The development of a high-performance ethane (C2H6)-selective adsorbent for the separation of ethane/ethylene (C2H6/C2H4) gas mixtures has been investigated for high-efficiency adsorption-based gas separation. Herein, we investigated Al-based metal-organic frameworks (MOFs) to identify an efficient C2H6-selective adsorbent (CAU-11), supported by a computational simulation study. CAU-11 exhibited numerous advantageous properties (such as low material cost, structural robustness, high reaction yield, and high C2H6/C2H4 selectivity) compared to other Al-based MOFs, indicating immense potential as a C2H6-selective adsorbent. CAU-11 exhibited preferential C2H6 adsorption in single-component gas adsorption experiments, and its predicted ideal adsorption solution theory selectivity of C2H6/C2H4 was over 2.1, consistent with the simulation analysis. Dynamic breakthrough experiments using representative compositions of the C2H6/C2H4 gas mixture confirmed the excellent separation ability of CAU-11; it produced high-purity C2H4 (>99.95%) with productivity values of 0.79 and 2.02 mol L-1 while repeating the cyclic experiment with 1:1 and 1:15 v/v C2H6/C2H4 gas mixtures, respectively, at 298 K and 1 bar. The high C2H6/C2H4 separation ability of CAU-11 could be attributed to its non-polar pore environment and optimum pore dimensions which strengthen the interaction of its pores (via C-H···π interactions) with C2H6 to a greater extent than with C2H4.

STANDARD M10 SARS-CoV-2 Assay for Rapid Detection of SARS-CoV-2: Comparison of Four Real-Time PCR Assays.

The demand for assays that can rapidly and accurately detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) remains high. We evaluated the performance of two rapid real-time reverse transcription polymerase chain reaction (RT-qPCR) assays (STANDARD M10 SARS-CoV-2 and Xpert Xpress SARS-CoV-2) against conventional RT-qPCR assays (STANDARD M nCoV and Allplex SARS-CoV-2) for detecting SARS-CoV-2. A total of 225 swab samples were collected and tested using the four assays. The STANDARD M10 SARS-CoV-2 assay showed 97.4% positive percent agreement (PPA) and 100.0% negative percent agreement (NPA) compared to the STANDARD M nCoV assay and Allplex SARS-CoV-2 assay. STANDARD M10 exhibited high performance except in samples with low viral loads (cycle threshold (Ct) > 30). Xpert Xpress showed PPA and NPA of 100.0% compared to the two conventional RT-qPCR assays. The kappa coefficient (Κ) showed nearly almost perfect agreement between each assay and conventional RT-qPCR assays. The correlations of Ct values between the two rapid RT-qPCR and conventional RT-qPCR assays were >0.8, indicating strong correlations. All included assays could detect SARS-CoV-2 variants, such as the Alpha, Beta, and Gamma variants. The recently developed STANDARD M10 has a shorter turnaround time and random-access detection on automated devices, thereby facilitating efficient testing in emergency settings.

Quantitative Analysis of Anti-N and Anti-S Antibody Titers of SARS-CoV-2 Infection after the Third Dose of COVID-19 Vaccination.

We quantitatively analyzed SARS-CoV-2 antibody levels in patients after two doses of the ChAdOx1 nCoV-19 vaccine and the third BNT162b2 booster. We obtained 255 serum samples from 149 healthcare workers 1 and 4 months after the third dose. Of the 149 participants, 58 (38.9%) experienced COVID-19 infection during the 4-month study period, with infection occurring 7−62 days before the second blood draw. Total antibody titers against the anti-spike (anti-S) and anti-nucleocapsid (anti-N) proteins of SARS-CoV-2 were measured using Elecsys Anti-SARS-CoV-2 S and Elecsys Anti-SARS-CoV-2 assays (Roche), respectively. The median anti-S antibody titer in the non-infected groups at 4 months after the third dose was significantly decreased compared to that at 1 month after the third dose (from 17,777 to 3673 U/mL, p < 0.001). The infected group showed higher median anti-S antibody titers at 4 months (19,539 U/mL) than the non-infected group (3673 U/mL). The median anti-N antibody titer in the infected group at 4 months after the third dose was a 5.07 cut-off index (79.3% positivity). Anti-N antibody titers in the infected group were correlated with the number of days after SARS-CoV-2 infection. These data provide useful information for determining quarantine strategies and fourth vaccination requirements.

Humoral and Cellular Responses to BNT162b2 as a Booster Following Two Doses of ChAdOx1 nCov-19 Determined Using Three SARS-CoV-2 Antibody Assays and an Interferon-Gamma Release Assay: A Prospective Longitudinal Study in Healthcare Workers.

Data on humoral and cellular responses to BNT162b2 as a booster dose, following two doses of ChAdOx1 nCov-19 vaccine, have seldom been reported. The aim of this study was to assess the positivity rates of three representative antibody assays targeting total, IgG, and neutralizing antibodies, and an interferon-γ release assay (IGRA), and to determine the longitudinal changes in quantitative antibody titers after each vaccination. A total of 1027 samples were collected from healthcare workers. The number of participants after the booster dose was 153, and they all completed a questionnaire on adverse reactions. All antibody assays showed 100.0% positivity at 1 month after booster vaccination. The median antibody titers of the assays were significantly increased compared with those after the second dose (22.1-fold increase for Roche total antibody, 14.0-fold increase for Abbott IgG, and 1.1-fold increase (97.5% inhibition) for GenScript neutralizing antibody). Cellular responses determined using the IGRA were positive in 92.8% of the participants. Most participants (72.5%) reported mild adverse reactions. Correlations between the three antibody assays and IGRA were weak or negligible, indicating a difference between humoral and cellular responses. Overall, our study provides information about booster vaccine strategies and laboratory settings, which could subsequently contribute to the control of the spread of coronavirus disease 2019.

Molecular Epidemiology of Adenoviral Keratoconjunctivitis in Korea.

Human adenoviruses (HAdVs) are a major cause of epidemic keratoconjunctivitis. We investigated the types of adenoviruses responsible for the recent epidemic of keratoconjunctivitis in Korea. From January to November 2019, 218 conjunctival swab samples were collected from patients clinically suspected as having adenoviral keratoconjunctivitis. Genotyping targeting of adenovirus capsid hexon genes was performed using PCR and sequencing. Of the 218 samples collected, 128 (58.7%) were positive for the adenovirus genes by PCR, and 126 samples were successfully genotyped. Adenovirus type 8 (HAdV-D8) was the most common type (67.5%), followed by HAdV-D64 (11.1%), HAdV-D37 (9.5%), HAdV-B3 (5.6%), HAdV-D53 (4.0%), HAdV-E4 (1.6%), and HAdV-D56 (0.8%). Adenoviral keratoconjunctivitis cases were the most frequent in July and August 2019, which were mainly caused by type 8. Phylogenetic analyses revealed little genetic distance among adenoviruses of the same type detected in our study. Our results provide basic data for further studies of adenoviral keratoconjunctivitis.

Performance Comparison of Five SARS-CoV-2 Antibody Assays for Seroprevalence Studies.

BACKGROUND: Seroprevalence studies of coronavirus disease 2019 (COVID-19) cases, including asymptomatic and past infections, are important to estimate the scale of the disease outbreak and to establish quarantine measures. We evaluated the clinical performance of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antibody assays available in Korea for use in seroprevalence studies. METHODS: The sensitivity, specificity, cross-reactivity, and interference of five SARS-CoV-2 antibody assays were evaluated using the following: 398 serum samples from confirmed COVID-19 patients, 510 negative control samples from before 2018 (pre-pandemic), 163 serum samples from patients with SARS, Middle East respiratory syndrome (MERS), and other viral infections, and five samples for the interference study. RESULTS: The sensitivities of the five assays ranged from 92.2% to 98%, and their specificities, including cross-reactivity and interference, ranged from 97.5% to 100%. The agreement rates were excellent (kappa >0.9). Adjustment of the cutoff values could be considered through ROC curve analysis. The positive predictive values of the individual assays varied from 3.5% to 100% at a 0.1% prevalence but were as high as ≥95% when two assays were combined. CONCLUSIONS: The prevalence of COVID-19 in Korea is considered to be exceptionally low at present; thus, we recommend using a combination of two or more SARS-CoV-2 antibody assays rather than a single assay. These results could help select SARS-CoV-2 antibody assays for COVID-19 seroprevalence studies in Korea.

Comparison of the Results of Five SARS-CoV-2 Antibody Assays before and after the First and Second ChAdOx1 nCoV-19 Vaccinations among Health Care Workers: a Prospective Multicenter Study.

Reliable results for serological positivity to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antibody after the second dose of AstraZeneca (AZ) vaccination are important to estimate the real efficacy of vaccination. We evaluated positivity rates and changes in semiquantitative antibody titers before and after the first and second ChAdOx1 nCoV-19 vaccinations using five SARS-CoV-2 antibody assays, including two surrogate virus neutralization tests. A total of 674 serum samples were obtained from 228 participants during three blood sampling periods. A questionnaire on symptoms, severity, and adverse reaction duration was completed by participants after the second vaccination. The overall positive rates for all assays were 0.0 to 0.9% before vaccination, 66.2 to 92.5% after the first vaccination, and 98.2 to 100.0% after the second vaccination. Median antibody titers in five assays after the second dose of vaccination were increased compared to those after the first dose (106.4-fold increase for Roche total antibody, 3.6-fold for Abbott IgG, 3.6-fold for Siemens, 1.2-fold for SD Biosensor V1 neutralizing antibody, and 2.2-fold for GenScript neutralizing antibody). Adverse reactions were reduced after the second dose in 89.9% of participants compared to after the first dose. Overall, the second vaccination led to almost 100% positivity rates based on these SARS-CoV-2 antibody assays. The results should be interpreted with caution, considering the characteristics of the applied assays. Our findings could inform decisions regarding vaccination and the use of immunoassays, thus contributing to SARS-CoV-2 pandemic control.

Assessment of medical students' clinical performance using high-fidelity simulation: comparison of peer and instructor assessment.

BACKGROUND: High-fidelity simulators are highly useful in assessing clinical competency; they enable reliable and valid evaluation. Recently, the importance of peer assessment has been highlighted in healthcare education, and studies using peer assessment in healthcare, such as medicine, nursing, dentistry, and pharmacy, have examined the value of peer assessment. This study aimed to analyze inter-rater reliability between peers and instructors and examine differences in scores between peers and instructors in the assessment of high-fidelity-simulation-based clinical performance by medical students. METHODS: This study analyzed the results of two clinical performance assessments of 34 groups of fifth-year students at Ajou University School of Medicine in 2020. This study utilized a modified Queen's Simulation Assessment Tool to measure four categories: primary assessment, diagnostic actions, therapeutic actions, and communication. In order to estimate inter-rater reliability, this study calculated the intraclass correlation coefficient and used the Bland and Altman method to analyze agreement between raters. A t-test was conducted to analyze the differences in evaluation scores between colleagues and faculty members. Group differences in assessment scores between peers and instructors were analyzed using the independent t-test. RESULTS: Overall inter-rater reliability of clinical performance assessments was high. In addition, there were no significant differences in overall assessment scores between peers and instructors in the areas of primary assessment, diagnostic actions, therapeutic actions, and communication. CONCLUSIONS: The results indicated that peer assessment can be used as a reliable assessment method compared to instructor assessment when evaluating clinical competency using high-fidelity simulators. Efforts should be made to enable medical students to actively participate in the evaluation process as fellow assessors in high-fidelity-simulation-based assessment of clinical performance in situations similar to real clinical settings.