Functional significance of serine 13 in the active site of glutathione S-transferase F3 from Oryza sativa.

Plant glutathione S-transferase (GST, EC 2.5.1.18) is an enzyme that detoxifies various electrophilic compounds including herbicides and organic pollutants by catalyzing the formation of conjugates with reduced glutathione (GSH). Although the structure and function of the GST subunits in rice, an important food in Asia, are not well understood, they are crucial for herbicide development. To investigate the role of active site residues in rice Phi-class GSTF3 (OsGSTF3), evolutionarily conserved serine residues were replaced with alanine using site-directed mutagenesis to obtain the mutants S13A, S38A, S69A, and S169A. These four mutants were expressed in Escherichia coli and purified to electrophoretic homogeneity using immobilized GSH affinity chromatography. Mutation of Ser13 to Ala resulted in substantial reductions in specific activities and kcat/Km values for the GSH-[1-chloro-2,4-dinitrobenzene (CDNB)] conjugation reaction. In contrast, mutations of Ser38, Ser69, and Ser169 to Ala had little effect on the activities and kinetic parameters. Additionally, the mutation of Ser13 to Ala significantly affected the KmGSH and I50 values of S-hexylglutathione and S-(2,4-dinitrophenyl)glutathione, which compete with GSH and the product of GSH-CDNB conjugation, respectively. A pH-log (kcat/KmCDNB) plot was used to estimate the pKa value of GSH in the enzyme-GSH complex of the wild-type enzyme, which was approximately 6.9. However, the pKa value of GSH in the enzyme-GSH complex of the S13A mutant was approximately 8.7, which was about 1.8 pK units higher than that of the wild-type enzyme. OsGSTF3 was also crystallized for crystallographic study, and the structure analyses revealed that Ser13 is located in the active site and that its side chain is in close proximity to the thiol group of glutathione bound in the enzyme. Based on these substitution effects on kinetic parameters, the dependence of kinetic parameters on the pH and 3-dimensional structure, it was suggested that Ser13 in rice OsGSTF3 is the residue responsible for catalytic activity by lowering the pKa of GSH in the enzyme-GSH complex and enhancing the nucleophilicity of the GSH thiol in the active site.

Thermal Dynamics of a Novel Radio-Frequency Device for Endoscopic Spine Surgery: An Experimental Model.

STUDY DESIGN: Experimental study. OBJECTIVE: In this study, the ambient temperature of a radiofrequency (RF) electrode tip was compared and analyzed in terms of products, mode, flow quantity, and flow rate. SUMMARY OF BACKGROUND DATA: Endoscopic spine surgery is a widely used operation for degenerative lumbar stenosis and herniated lumbar disc. To perform endoscopic spine surgery, dedicated instruments like a RF generator and electrode are essential. METHODS: An evaluation system capable of measuring temperature under equal conditions at a certain distance from the electrode tip was manufactured. The distance between the electrode tip and the temperature sensor was set to 1, 5, and 10 mm. The flow quantities of 0, 50, 100, and 150 mL/min and the flow rates of 0, 0.20, 0.53, and 0.80 m/s were compared and statistically analyzed. RESULTS: The temperatures measured in the experiments conducted on the four combinations of RF device showed similar values, and showed differences according to the characteristics of each mode of the RF. As the distance between the electrode tip and the temperature sensor increased, the temperature decreased, and as flow quantity or flow rate increased, the temperature decreased. The maximum temperatures differed significantly according to flow quantity, between flow quantities of 0 and 100 mL/min (P  = 0.03) and between 0 and 150 mL/min (P ≤ 0.01). The maximum temperatures also differed significantly between the flow rate of 0 m/s, and the flow rates of 0.20, 0.53, and 0.80 m/s, with P ≤ 0.01 in all three comparisons. CONCLUSION: This is the first study in which we made a customized RF temperature evaluation system and verified the temperature changes in various environments. When irrigation was performed, we could confirm that the maximum temperature was less than 60°C. Irrigation is considered essential in endoscopic spine surgery. LEVEL OF EVIDENCE: 3.

Structural implication of substrate binding by peptidoglycan remodeling enzyme MepS.

Constant remodeling is necessary for bacterial cell growth and bacterial morphogenesis; peptidoglycan (PG) is a crucial component in this process. Murein DD-endopeptidase (MepS), initially annotated as Spr from E. coli K12, is a NlpC/P60 family endopeptidase, which cleaves the meso-diaminopimelate (DAP)-D-Ala peptide bond of PG. The Cys68, His119, His131 triad form the active site residues. MepS has autolytic activity, which is strictly regulated by a periplasmic degradation system comprising the NlpI/Prc protease complex. MepS is essential for maintaining the cell viability, and therefore, it is a potential target for developing antibiotics. This study aimed to understand the structural basis of substrate recognition and degradation. We determined the high-resolution structures of MepS, after mutating Cys68 to serine (MepS-C68S) to improve stability. We further found that citrate and L-malate molecules bind to the active site of MepS-C68S; this is in line with the recurrent observation of organic acids binding to PG endopeptidases. The presence of conserved residues on the surface revealed the potential peptide binding sites of MepS. We modelled a cross-linked peptide model of meso-DAP-D-Ala-meso-DAP, bound to the active site groove of MepS-C68S. Two conserved tyrosine residues, Tyr56 and Tyr147 appeared to be essential for the recognition of peptides. Our structural discoveries could provide insights for the design of novel antibiotics targeting MepS.

Ground Moving Target Tracking Filter Considering Terrain and Kinematics.

This paper addresses ground target tracking (GTT) for airborne radar. Digital terrain elevation data (DTED) are widely used for GTT as prior information under the premise that ground targets are constrained on terrain. Existing works fuse DTED to a tracking filter in a way that adopts only the assumption that the position of the target is constrained on the terrain. However, by kinematics, it is natural that the velocity of the moving ground target is constrained as well. Furthermore, DTED provides neither continuous nor accurate measurement of terrain elevation. To overcome such limitations, we propose a novel soft terrain constraint and a constraint-aided particle filter. To resolve the difficulties in applying the DTED to the GTT, first, we reconstruct the ground-truth terrain elevation using a Gaussian process and treat DTED as a noisy observation of it. Then, terrain constraint is formulated as joint soft constraints of position and velocity. Finally, we derive a Soft Terrain Constrained Particle Filter (STC-PF) that propagates particles while approximately satisfying the terrain constraint in the prediction step. In the numerical simulations, STC-PF outperforms the Smoothly Constrained Kalman Filter (SCKF) in terms of tracking performance because SCKF can only incorporate hard constraints.

Structural basis of the complementary activity of two ketosynthases in aryl polyene biosynthesis.

Aryl polyenes (APE) are one of the most widespread secondary metabolites among gram-negative bacteria. In Acinetobacter baumannii, strains belonging to the virulent global clone 2 (GC2) mostly contain APE biosynthesis genes; its relevance in elevated pathogenicity is of great interest. APE biosynthesis gene clusters harbor two ketosynthases (KSs): the heterodimeric KS-chain length factor complex, ApeO-ApeC, and the homodimeric ketoacyl-acyl carrier protein synthase I (FabB)-like KS, ApeR. The role of the two KSs in APE biosynthesis is unclear. We determined the crystal structures of the two KSs from a pathogenic A. baumannii strain. ApeO-ApeC and ApeR have similar cavity volumes; however, ApeR has a narrow cavity near the entrance. In vitro assay based on the absorption characteristics of polyene species indicated the generation of fully elongated polyene with only ApeO-ApeC, probably because of the funnel shaped active site cavity. However, adding ApeR to the reaction increases the throughput of APE biosynthesis. Mutagenesis at Tyr135 in the active site cavity of ApeR reduces the activity significantly, which suggests that the stacking of the aryl group between Tyr135 and Phe202 is important for substrate recognition. Therefore, the two KSs function complementarily in the generation of APE to enhance its production.

Structural comparison of Acinetobacter baumannii ß-ketoacyl-acyl carrier protein reductases in fatty acid and aryl polyene biosynthesis.

Some Gram-negative bacteria harbor lipids with aryl polyene (APE) moieties. Biosynthesis gene clusters (BGCs) for APE biosynthesis exhibit striking similarities with fatty acid synthase (FAS) genes. Despite their broad distribution among pathogenic and symbiotic bacteria, the detailed roles of the metabolic products of APE gene clusters are unclear. Here, we determined the crystal structures of the ß-ketoacyl-acyl carrier protein (ACP) reductase ApeQ produced by an APE gene cluster from clinically isolated virulent Acinetobacter baumannii in two states (bound and unbound to NADPH). An in vitro visible absorption spectrum assay of the APE polyene moiety revealed that the ß-ketoacyl-ACP reductase FabG from the A. baumannii FAS gene cluster cannot be substituted for ApeQ in APE biosynthesis. Comparison with the FabG structure exhibited distinct surface electrostatic potential profiles for ApeQ, suggesting a positively charged arginine patch as the cognate ACP-binding site. Binding modeling for the aryl group predicted that Leu185 (Phe183 in FabG) in ApeQ is responsible for 4-benzoyl moiety recognition. Isothermal titration and arginine patch mutagenesis experiments corroborated these results. These structure-function insights of a unique reductase in the APE BGC in comparison with FAS provide new directions for elucidating host-pathogen interaction mechanisms and novel antibiotics discovery.

Deciphering the Binding Interactions between Acinetobacter baumannii ACP and ß-ketoacyl ACP Synthase III to Improve Antibiotic Targeting Using NMR Spectroscopy.

Fatty acid synthesis is essential for bacterial viability. Thus, fatty acid synthases (FASs) represent effective targets for antibiotics. Nevertheless, multidrug-resistant bacteria, including the human opportunistic bacteria, Acinetobacter baumannii, are emerging threats. Meanwhile, the FAS pathway of A. baumannii is relatively unexplored. Considering that acyl carrier protein (ACP) has an important role in the delivery of fatty acyl intermediates to other FAS enzymes, we elucidated the solution structure of A. baumannii ACP (AbACP) and, using NMR spectroscopy, investigated its interactions with ß-ketoacyl ACP synthase III (AbKAS III), which initiates fatty acid elongation. The results show that AbACP comprises four helices, while Ca2+ reduces the electrostatic repulsion between acid residues, and the unconserved F47 plays a key role in thermal stability. Moreover, AbACP exhibits flexibility near the hydrophobic cavity entrance from D59 to T65, as well as in the α1α2 loop region. Further, F29 and A69 participate in slow exchanges, which may be related to shuttling of the growing acyl chain. Additionally, electrostatic interactions occur between the α2 and α3-helix of ACP and AbKAS III, while the hydrophobic interactions through the ACP α2-helix are seemingly important. Our study provides insights for development of potent antibiotics capable of inhibiting A. baumannii FAS protein-protein interactions.

Identification of inhibitor binding hotspots in Acinetobacter baumannii ß-ketoacyl acyl carrier protein synthase III using molecular dynamics simulation.

Acinetobacter baumannii is a gram-negative bacterium that is rapidly developing drug resistance due to the abuse of antibiotics. The emergence of multidrug-resistant A. baumannii has greatly contributed to the urgency of developing new antibiotics. Previously, we had discovered two potent inhibitors of A. baumannii ß-ketoacyl acyl carrier protein synthase III (abKAS III), YKab-4 and YKab-6, which showed potent activity against A. baumannii. In addition, we have reported the crystal structure of abKAS III. In the present study, we investigated the binding between abKAS III and its inhibitors by docking simulation. Molecular dynamics (MD) simulations were performed using docked inhibitor models to identify the hotspot residues related to inhibitor binding. The binding free energies estimated using the MD simulations suggest that residues I198 and F260 of abKAS III serve as the inhibitor binding hotspots. I198, found to be responsible for mediating hydrophobic interactions with inhibitors, had the strongest residual binding energy among all abKAS III residues. We modeled glutamine substitutions of residues I198 and F260 and estimated the relative binding energies of the I198Q and F260Q variants. The results confirmed that I198 and F260 are the key inhibitor binding residues. The roles of the key residues in inhibitor binding, i.e. F260 in the α9 helix and the I198 in the ß6ß7 loop region, were investigated using principal component analysis (PCA). PCA revealed the structural changes resulting from the abKAS III I198Q and F260Q mutations and described the essential dynamics of the α9 helix. In addition, the results suggest that the ß6ß7 loop region may act as a gate keeper for ligand binding. Hydrophobic interactions involving I198 and F260 in abKAS III appear to be essential for the binding of the inhibitors YKab-4 and YKab-6. In conclusion, this study provides valuable information for the rational design of antibiotics via the inhibition of abKAS III.

Structural Characterization of an ACP from Thermotoga maritima: Insights into Hyperthermal Adaptation.

Thermotoga maritima, a deep-branching hyperthermophilic bacterium, expresses an extraordinarily stable Thermotoga maritima acyl carrier protein (Tm-ACP) that functions as a carrier in the fatty acid synthesis system at near-boiling aqueous environments. Here, to understand the hyperthermal adaptation of Tm-ACP, we investigated the structure and dynamics of Tm-ACP by nuclear magnetic resonance (NMR) spectroscopy. The melting temperature of Tm-ACP (101.4 °C) far exceeds that of other ACPs, owing to extensive ionic interactions and tight hydrophobic packing. The D59 residue, which replaces Pro/Ser of other ACPs, mediates ionic clustering between helices III and IV. This creates a wide pocket entrance to facilitate the accommodation of long acyl chains required for hyperthermal adaptation of the T. maritima cell membrane. Tm-ACP is revealed to be the first ACP that harbor an amide proton hyperprotected against hydrogen/deuterium exchange for I15. The hydrophobic interactions mediated by I15 appear to be the key driving forces of the global folding process of Tm-ACP. Our findings provide insights into the structural basis of the hyperthermal adaptation of ACP, which might have allowed T. maritima to survive in hot ancient oceans.

Optimal Target Assignment with Seamless Handovers for Networked Radars.

This paper proposes a binary linear programming formulation for multiple target assignment of a radar network and demonstrates its applicability to obtain optimal solutions using an off-the-shelf mixed-integer linear programming solver. The goal of radar resource scheduling in this paper is to assign the maximum number of targets by handing over targets between networked radar systems to overcome physical limitations such as the detection range and simultaneous tracking capability of each radar. To achieve this, time windows are generated considering the relation between each radar and target considering incoming target information. Numerical experiments using a local-scale simulation were performed to verify the functionality of the formulation and a sensitivity analysis was conducted to identify the trend of the results with respect to several parameters. Additional experiments performed for a large-scale (battlefield) scenario confirmed that the proposed formulation is valid and applicable for hundreds of targets and corresponding radar network systems composed of five distributed radars. The performance of the scheduling solutions using the proposed formulation was better than that of the general greedy algorithm as a heuristic approach in terms of objective value as well as the number of handovers.

Structural basis of branched-chain fatty acid synthesis by Propionibacterium acnes ß-ketoacyl acyl Carrier protein synthase.

Propionibacterium acnes is an anaerobic gram-positive bacterium found in the niche of the sebaceous glands in the human skin, and is a causal pathogen of inflammatory skin diseases as well as periprosthetic joint infection. To gain effective control of P. acnes, a deeper understanding of the cellular metabolism mechanism involved in its ability to reside in this unique environment is needed. P. acnes exhibits typical cell membrane features of gram-positive bacteria, such as control of membrane fluidity by branched-chain fatty acids (BCFAs). Branching at the iso- or anteiso-position is achieved by incorporation of isobutyryl- or 2-methyl-butyryl-CoA via ß-ketoacyl acyl carrier protein synthase (KAS III) from fatty acid synthesis. Here, we determined the crystal structure of P. acnes KAS III (PaKAS III) at the resolution of 1.9 Šfor the first time. Conformation-sensitive urea polyacrylamide gel electrophoresis and tryptophan fluorescence quenching experiments confirmed that PaKAS III prefers isobutyryl-CoA as the acetyl-CoA, and the unique shape of the active site cavity complies with incorporation of branched-short chain CoAs. The determined structure clearly illustrates how BCFA synthesis is achieved in P. acnes. Moreover, the unique shape of the cavity required for the branched-chain primer can be invaluable in designing novel inhibitors of PaKAS III and developing new specifically targeted antibiotics.

Elucidation of the crystal structure of FabD from the multidrug-resistant bacterium Acinetobacter baumannii.

Bacterial fatty acid synthesis (FAS) has been extensively studied as a potential target of antimicrobials. In FAS, FabD mediates transacylation of the malonyl group from malonyl-CoA to acyl-carrier protein (ACP). The mounting threat of nosocomial infection by multidrug-resistant Acinetobacter baumannii warrants a deeper understanding of its essential cellular mechanisms, which could lead to effective control of this highly competent pathogen. The molecular mechanisms involved in A. baumannii FAS are poorly understood, and recent research has suggested that Pseudomonas aeruginosa, a closely related nosocomial pathogen of A. baumannii, utilizes FAS to produce virulence factors. In this study, we solved the crystal structure of A. baumannii FabD (AbFabD) to provide a platform for the development of new antibacterial agents. Analysis of the structure of AbFabD confirmed the presence of highly conserved active site residues among bacterial homologs. Binding constants between AbFabD variants and A. baumannii ACP (AbACP) revealed critical conserved residues Lys195 and Lys200 involved in AbACP binding. Computational docking of a potential inhibitor, trifluoperazine, revealed a unique inhibitor-binding pocket near the substrate-binding site. The structural study presented herein will be useful for the structure-based design of potent AbFabD inhibitors.

Microwave-assisted sintering synthesis of greenish-yellow emitting Sr2 SiO4 :Eu2+ phosphors.

Europium ion (Eu2+ ) doped Sr2 SiO4 phosphors with greenish-yellow emission were synthesized using microwave-assisted sintering. The phase structure and photoluminescence (PL) properties of the obtained phosphor samples were investigated. The PL excitation spectra of the Sr2 SiO4 :Eu2+ phosphors exhibited a broad band in the range of 260 nm to 485 nm with a maximum at 361 nm attributed to the 5f-4d allowed transition of the Eu2+ ions. Under an excitation at 361 nm, the Sr2 SiO4 :Eu2+ phosphor exhibited a greenish-yellow emission peak at 541 nm with an International-Commission-on-Illumination (CIE) chromaticity of (0.3064, 0.4772). The results suggest that the microwave-assisted sintering method is promising for the synthesis of phosphors owing to the decreased sintering time without the use of additional reductive agents.

Structure and substrate specificity of ß-ketoacyl-acyl carrier protein synthase III from Acinetobacter baumannii.

Originally annotated as the initiator of fatty acid synthesis (FAS), ß-ketoacyl-acyl carrier protein synthase III (KAS III) is a unique component of the bacterial FAS system. Novel variants of KAS III have been identified that promote the de novo use of additional extracellular fatty acids by FAS. These KAS III variants prefer longer acyl-groups, notably octanoyl-CoA. Acinetobacter baumannii, a clinically important nosocomial pathogen, contains such a multifunctional KAS III (AbKAS III). To characterize the structural basis of its substrate specificity, we determined the crystal structures of AbKAS III in the presence of different substrates. The acyl-group binding cavity of AbKAS III and co-crystal structure of AbKAS III and octanoyl-CoA confirmed that the cavity can accommodate acyl groups with longer alkyl chains. Interestingly, Cys264 formed a disulfide bond with residual CoA used in the crystallization, which distorted helices at the putative interface with acyl-carrier proteins. The crystal structure of KAS III in the alternate conformation can also be utilized for designing novel antibiotics.

Evaluation of the safety and efficiency of novel metallic implant scaler tips manufactured by the powder injection molding technique.

BACKGROUND: Although many studies have compared the properties of ultrasonic scaling instruments, it remains controversial as to which is most suitable for implant scaling. This study evaluated the safety and efficiency of novel metallic ultrasonic scaler tips made by the powder injection molding (PIM) technique on titanium surfaces. METHODS: Mechanical instrumentation was carried out using four types of metal scaler tips consisting of copper (CU), bronze (BR), 316 L stainless steel (316 L), and conventional stainless steel (SS) tips. The instrumented surface alteration image of samples was viewed with scanning electron microscope (SEM) and surface profile of the each sample was investigated with confocal laser scanning microscopy (CLSM). Arithmetic mean roughness (Ra) and maximum height roughness (Rmax) of titanium samples were measured and dissipated power of the scaler tip was estimated for scaling efficiency. RESULTS: The average Ra values caused by the 316 L and SS tip were about two times higher than those of the CU and BR tips (p < 0.05). The Rmax value showed similar results. The efficiency of the SS tip was about 3 times higher than that of CU tip, the 316 L tip is about 2.7 times higher than that of CU tip, and the BR tip is about 1.2 times higher than that of CU tip. CONCLUSIONS: Novel metallic bronze alloy ultrasonic scaler tip minimally damages titanium surfaces, similar to copper alloy tip. Therefore, this bronze alloy scaler tip may be promising instrument for implant maintenance therapy.

Crystal structure of dibenzothiophene sulfone monooxygenase BdsA from Bacillus subtilis WU-S2B.

The dibenzothiophene (DBT) sulfone monooxygenase BdsA from Bacillus subtilis WU-S2B catalyzes the conversion of DBT sulfone to 2'-hydroxybiphenyl 2-sulfinate. We report the crystal structures of BdsA at a resolution of 2.80 Å. BdsA exists as a homotetramer with a dimer-of-dimers configuration in the crystal, and the interaction between E288 and R296 in BdsA is important for tetramer formation. A structural comparison with homologous proteins shows that the orientation and location of the α9-α12 helices in BdsA are closer to those of the closed form than those of the open form in the EDTA monooxygenase EmoA. Proteins 2017; 85:1171-1177. © 2017 Wiley Periodicals, Inc.

Insight into the transition between the open and closed conformations of Thermus thermophilus carboxypeptidase.

Carboxypeptidase cleaves the C-terminal amino acid residue from proteins and peptides. Here, we report the functional and structural characterizations of carboxypeptidase belonging to the M32 family from the thermophilic bacterium Thermus thermophilus HB8 (TthCP). TthCP exhibits a relatively broad specificity for both hydrophilic (neutral and basic) and hydrophobic (aliphatic and aromatic) residues at the C-terminus and shows optimal activity in the temperature range of 75-80 °C and in the pH range of 6.8-7.2. Enzyme activity was significantly enhanced by cobalt or cadmium and was moderately inhibited by Tris at 25 °C. We also determined the crystal structure of TthCP at 2.6 Å resolution. Two dimer types of TthCP are present in the crystal. One type consists of two subunits in different states, open and closed, with a Cα RMSD value of 2.2 Å; the other type consists of two subunits in the same open state. This structure enables us to compare the open and closed states of an M32 carboxypeptidase. The TthCP subunit can be divided into two domains, L and S, which are separated by a substrate-binding groove. The L and S domains in the open state are almost identical to those in the closed state, with Cα RMSD values of 0.84 and 0.53 Å, respectively, suggesting that the transition between the open and closed states proceeds with a large hinge-bending motion. The superimposition between the closed states of TthCP and BsuCP, another M32 family member, revealed that most putative substrate-binding residues in the grooves are oriented in the same direction.

Collaborative Management of Combined Periodontal-endodontic Lesions with a Palatogingival Groove: A Case Series.

INTRODUCTION: This article reports 3 representative cases of interdisciplinary management of a palatogingival groove in maxillary lateral incisors. The development, pathology, and effectiveness of management approaches in cases involving a combined periodontal-endodontic lesion with a palatogingival groove are discussed. METHODS: We describe 3 patients with a noncontributory medical history presenting with a chief complaint related to a maxillary incisor and diagnosed with a combined periodontal-endodontic lesion with a palatogingival groove at Seoul National University Dental Hospital, Seoul, Korea. RESULTS: Palatogingival grooves were mostly associated with deep periodontal pockets connected to a periapical lesion. Optional collaborative treatments were performed according to the condition as follows: case 1, root canal treatment (RCT), open flap debridement, odontoplasty, and guided tissue regeneration; case 2, RCT, apicoectomy, open flap debridement, and odontoplasty; and case 3, RCT, crown restoration, root planning, and odontoplasty. After clinical examination and radiographic assessments, the periapical lesion and periodontal deep pocket were successfully resolved with periodontal-endodontic collaborative treatment involving both periodontal surgical procedures (cases 1 and 2) and a nonsurgical procedure (case 3). CONCLUSIONS: Within the limitations of this study, these case reports show that accurate diagnosis of developmental anomalies and elimination of inflammatory irritants are key factors for favorable long-term outcomes.

Structure-activity relationship-based screening of antibiotics against Gram-negative Acinetobacter baumannii.

To discover potent antibiotics against the Gram-negative bacteria, we performed a structure-activity relationship (SAR) study of YKsa-6, which was the most potent inhibitor of Staphylococcus aureus ß-ketoacyl acyl carrier protein III in our previous study. We identified and selected 11 candidates, and finally screened two active compounds, YKab-4 (4-[(3-chloro-4-methylphenyl)aminoiminomethyl]benzene-1,3-diol) and YKab-6 (4-[[3-(trifluoromethyl)phenyl]aminoiminomethyl]phenol) as inhibitors of Acinetobacter baumannii KAS III (abKAS III). They showed potent antimicrobial activities at 2 or 8 µg/mL, specifically against Acinetobacter baumannii and a strong binding affinity for abKAS III. From the homology modeling, we defined the three-dimensional (3D) structure of abKAS III for the first time and found that it had an extra loop region compared with common Gram-negative bacteria derived KAS IIIs. The docking study revealed that the hydroxyl groups of inhibitors formed extensive hydrogen bonds and the complicated hydrophobic and cation-stacking interactions are important to binding with abKAS III. We confirmed that the hydrophobicity of these compounds might be the essential factor for their antimicrobial activities against Gram-negative bacteria as well as their structural rigidity, a cooperative feature for retaining the hydrophobic interactions between abKAS III and its inhibitors. This study may provide an insight developing strategies for potent antibiotics against A. baumannii.

The 1:2 complex between RavZ and LC3 reveals a mechanism for deconjugation of LC3 on the phagophore membrane.

Hosts utilize macroautophagy/autophagy to clear invading bacteria; however, bacteria have also developed a specific mechanism to survive by manipulating the host cell autophagy mechanism. One pathogen, Legionella pneumophila, can hinder host cell autophagy by using the specific effector protein RavZ that cleaves phosphatidylethanolamine-conjugated LC3 on the phagophore membrane. However, the detailed molecular mechanisms associated with the function of RavZ have hitherto remained unclear. Here, we report on the biochemical characteristics of the RavZ-LC3 interaction, the solution structure of the 1:2 complex between RavZ and LC3, and crystal structures of RavZ showing different conformations of the active site loop without LC3. Based on our biochemical, structural, and cell-based analyses of RavZ and LC3, both distant flexible N- and C-terminal regions containing LC3-interacting region (LIR) motifs are important for substrate recognition. These results suggest a novel mechanism of RavZ action on the phagophore membrane and lay the groundwork for understanding how bacterial pathogens can survive autophagy.