Effects of DASH diet with or without time-restricted eating in the management of stage 1 primary hypertension: a randomized controlled trial.

BACKGROUND: Time-restricted eating (TRE), a popular form of intermittent fasting, has shown benefits for improving metabolic diseases and cardiometabolic health. However, the effect of TRE in the regulation of blood pressure in primary hypertension remains unclear. METHODS: A 6-week randomized controlled trial was conducted, in which a total of 74 stage 1 primary hypertensive patients without high-risk were randomly assigned to Dietary Approaches to Stop Hypertension (DASH) group (n = 37) or DASH + TRE group (n = 37). Participants in the DASH + TRE group were instructed to consume their food within an 8-h window. Scientific research platform in We Chat application was used to track participants. The primary outcome was blood pressure. The secondary outcomes included body composition, cardiometabolic risk factors, inflammation-related parameters, urinary Na+ excretion, other clinical variables and safety outcomes. RESULTS: The reduction of systolic blood pressure and diastolic blood pressure were 5.595 ± 4.072 and 5.351 ± 5.643 mm Hg in the DASH group and 8.459 ± 4.260 and 9.459 ± 4.375 mm Hg in the DASH + TRE group. DASH + TRE group improved blood pressure diurnal rhythm. Subjects in DASH + TRE group had decreased extracellular water and increased urinary Na+ excretion. Furthermore, the decrease in blood pressure was associated with a reduction of extracellular water or increase in urinary Na+ excretion. In addition, safety outcomes such as nighttime hunger were also reported. CONCLUSION: Our study demonstrated that 8-h TRE + DASH diet caused a greater decrease in blood pressure in stage 1 primary hypertensive patients than DASH diet. This study may provide novel insights into the benefits of lifestyle modification in the treatment of primary hypertension. TRIAL REGISTRATION: https://www.chictr.org.cn/ (ChiCTR2300069393, registered on March 15, 2023).

N-type semiconducting hydrogel.

Hydrogels are an attractive category of biointerfacing materials with adjustable mechanical properties, diverse biochemical functions, and good ionic conductivity. Despite these advantages, their application in electronics has been restricted because of their lack of semiconducting properties, and they have traditionally only served as insulators or conductors. We developed single- and multiple-network hydrogels based on a water-soluble n-type semiconducting polymer, endowing conventional hydrogels with semiconducting capabilities. These hydrogels show good electron mobilities and high on/off ratios, enabling the fabrication of complementary logic circuits and signal amplifiers with low power consumption and high gains. We demonstrate that hydrogel electronics with good bioadhesive and biocompatible interface can sense and amplify electrophysiological signals with enhanced signal-to-noise ratios.

Continuous production of ultratough semiconducting polymer fibers with high electronic performance.

Conjugated polymers have demonstrated promising optoelectronic properties, but their brittleness and poor mechanical characteristics have hindered their fabrication into durable fibers and textiles. Here, we report a universal approach to continuously producing highly strong, ultratough conjugated polymer fibers using a flow-enhanced crystallization (FLEX) method. These fibers exhibit one order of magnitude higher tensile strength (>200 megapascals) and toughness (>80 megajoules per cubic meter) than traditional semiconducting polymer fibers and films, outperforming many synthetic fibers, ready for scalable production. These fibers also exhibit unique strain-enhanced electronic properties and exceptional performance when used as stretchable conductors, thermoelectrics, transistors, and sensors. This work not only highlights the influence of fluid mechanical effects on the crystallization and mechanical properties of conjugated polymers but also opens up exciting possibilities for integrating these functional fibers into wearable electronics.

The Prognostic and Immune Significance of BZW2 in Pan-Cancer and its Relationship with Proliferation and Apoptosis of Cervical Cancer.

BACKGROUND: Basic leucine zipper and W2 domains 2 (BZW2), a member of the basic domain leucine zipper superfamily of transcription factors, has been implicated in the development and progression of various cancers. However, the precise biological role of BZW2 in pan-cancer datasets remains to be explored. This study aimed to assess the prognostic significance of BZW2 and its immune-related signatures in various tumors. METHODS: Our study investigated the expression, epigenetic modifications, and clinical prognostic relevance of BZW2 using multi-omics data in different cancer types. Additionally, the immunological characteristics, tumor stemness, drug sensitivity, and correlation of BZW2 with immunotherapy response were explored. Finally, in vitro experiments were conducted to assess the impact of BZW2 knockdown on Hela cells, a cell line derived from cervical squamous cell carcinoma and endocervical adenocarcinoma (CESC). RESULTS: BZW2 exhibited elevated expression levels in various tumor tissues and significantly impacted the prognosis of different cancer types. BZW2 emerged as an independent prognostic factor in CESC. We found that copy number amplification and methylation levels of BZW2 were associated with its mRNA expression. Immunological analyses revealed that BZW2 shapes a non-inflamed immunosuppressive tumor microenvironment across multiple cancers. Furthermore, our cell experiments demonstrated that BZW2 knockdown reduced proliferation, migration, and apoptosis activities in CESC cells. CONCLUSIONS: BZW2 promotes cancer progression by shaping a non-inflamed immunosuppressive tumor microenvironment. Additionally, BZW2 was shown to significantly influence the proliferation, migration, and apoptosis of CESC cells.

Ultrastable N-Type Semiconducting Fiber Organic Electrochemical Transistors for Highly Sensitive Biosensors.

Organic electrochemical transistors (OECTs) have attracted increasing attention due to their merits of high transconductance, low operating voltage, and good biocompatibility, ideal for biosensors. However, further advances in their practical applications face challenges of low n-type performance and poor stability. Here, it is demonstrated that wet-spinning the commercially available n-type conjugated polymer poly(benzimidazobenzophenanthroline) (BBL) into highly aligned and crystalline fibers enhances both OECT performance and stability. Although BBL is only soluble in high-boiling-point strong acids, it can be wet-spun into high-quality fibers with adjustable diameters. The BBL fiber OECTs exhibit a record-high area-normalized transconductance (gm,A) of 2.40 µS µm-2 and over 10 times higher figure-of-merit (µC*) than its thin-film counterparts. More importantly, these fiber OECTs exhibit remarkable stability with no noticeable performance attenuation after 1500 cycles over 4 h operation, outperforming all previously reported n-type OECTs. The superior performance and stability can be attributed to shorter π-π stacking distance and ordered molecular arrangement in the fibers, endowing the BBL fiber OECT-based biosensors with outstanding sensitivity while keeping a miniaturized form factor. This work demonstrates that, beyond new material development, developing new fabrication technology is also crucial for addressing the performance and stability issues in n-type OECTs.

Effect of dietary selenium intake on CVD: a retrospective cohort study based on China Health and Nutrition Survey (CHNS) data.

OBJECTIVE: We aimed to examine the association between dietary Se intake and CVD risk in Chinese adults. DESIGN: This prospective cohort study included adults above 20 years old in the China Health and Nutrition Survey (CHNS), and they were followed up from 1997 to 2015 (n 16 030). Dietary data were retrieved from CHNS, and a 3-d, 24-h recall of food intake was used to assess the cumulative average intake of dietary Se, which was divided into quartiles. The Cox proportional hazards model was adopted to analyse the association between dietary Se intake and incident CVD risk. SETTING: CHNS (1991, 1993, 1997, 2000, 2004, 2006, 2009, 2011 and 2015). RESULTS: A total of 663 respondents developed CVD after being followed up for a mean of 9·9 years (median 9 years). The incidence of CVD was 4·3, 3·7, 4·6 and 4·0 per 1000 person-years across the quartiles of cumulative Se intake. After adjusting all potential factors, no significant associations were found between cumulative Se intake and CVD risk. No interactions were found between Se intake and income, urbanisation, sex, region, weight, hypertension and CVD risk. CONCLUSION: We found no association between dietary Se and CVD.

A hybrid model for hand-foot-mouth disease prediction based on ARIMA-EEMD-LSTM.

BACKGROUND: Hand, foot, and mouth disease (HFMD) is a common infectious disease that poses a serious threat to children all over the world. However, the current prediction models for HFMD still require improvement in accuracy. In this study, we proposed a hybrid model based on autoregressive integrated moving average (ARIMA), ensemble empirical mode decomposition (EEMD) and long short-term memory (LSTM) to predict the trend of HFMD. METHODS: The data used in this study was sourced from the National Clinical Research Center for Child Health and Disorders, Chongqing, China. The daily reported incidence of HFMD from 1 January 2015 to 27 July 2023 was collected to develop an ARIMA-EEMD-LSTM hybrid model. ARIMA, LSTM, ARIMA-LSTM and EEMD-LSTM models were developed to compare with the proposed hybrid model. Root mean square error (RMSE), mean absolute error (MAE) and coefficient of determination (R2) were adopted to evaluate the performances of the prediction models. RESULTS: Overall, ARIMA-EEMD-LSTM model achieved the most accurate prediction for HFMD, with RMSE, MAPE and R2 of 4.37, 2.94 and 0.996, respectively. Performing EEMD on the residual sequence yields 11 intrinsic mode functions. EEMD-LSTM model is the second best, with RMSE, MAPE and R2 of 6.20, 3.98 and 0.996. CONCLUSION: Results showed the advantage of ARIMA-EEMD-LSTM model over the ARIMA model, the LSTM model, the ARIMA-LSTM model and the EEMD-LSTM model. For the prevention and control of epidemics, the proposed hybrid model may provide a more powerful help. Compared with other three models, the two integrated with EEMD method showed significant improvement in predictive capability, offering novel insights for modeling of disease time series.

Application of digital design of orthodontic-prosthodontic multidisciplinary treatment plan in esthetic rehabilitation of anterior teeth / 北京大学学报(医学版)

OBJECTIVE@#To develop a digital workflow of orthodontic-prosthodontic multidisciplinary treatment plan which can be applied in complicated anterior teeth esthetic rehabilitation, in order to enhance the efficiency of communication between dentists and patients, and improve the predictability of treatment outcome.@*METHODS@#Twenty patients with the potential needs of orthodontic-prosthodontic multidisciplinary treatment to solve their complicated esthetic problems in anterior teeth were recruited in this study. Digital models of patients' both dental arches and soft tissues were captured using intra oral scanner. Direct prosthodontic (DP) treatment plan and orthodontic-prosthodontic (OP) treatment plan were carried out for each patient. For DP treatment plans, digital wax-up models were directly designed on original digital models using prosthodontic design system. For OP treatment plans, virtual-setups were performed using orthodontic analyze system according to orthodontic and esthetic criteria and imported to prosthodontic design system to finalize the digital wax-up models. These two treatment plans were shown to the patients and demonstrated elaborately. Each patient rated two treatment plans using visual analogue scales and the medians of scores of two treatment plans were analyzed using signed Wilcoxon test. Having taken into consideration various related factors, including time, costs of treatment, each patient chose a specific treatment plan. For the patients chose DP treatment plans, digital wax-up models were exported and printed into resin diagnostic models which would be utilized in the prosthodontic treatment process. For the patients chose OP treatment plans, virtual-setups were used to fabricate aligners or indirect bonding templates and digital wax-up models were also exported and printed into resin diagnostic models for prosthodontic treatment after orthodontic treatment completed.@*RESULTS@#The medians of scores of DP treatment plan and OP treatment plan were calculated and analyzed by IBM SPSS 20. The median of scores of DP treatment plan was 8.4, the minimum value was 6.9 and the maximum value was 9.3. The median of scores of OP treatment plan was 9.0, the minimum value was 7.9 and the maximum value was 9.6. The median of scores of OP was significantly higher than that of DP (Z=-3.23, P<0.01). Finally, 12 patients chose OP treatment plans and 8 patients chose DP treatment plans.@*CONCLUSION@#For cases with complex esthetic problems in anterior teeth, a digital workflow can demonstrate final treatment outcome and help patients make suitable treatment decisions. In our study, the orthodontic-prosthodontic multidisciplinary treatment plan is feasible which can provide predictions of treatment outcome and improve esthetic outcome with patients' satisfaction.

Measurement of cortical bone thickness in adults by cone-beam computerized tomography for orthodontic miniscrews placement / 华中科技大学学报（医学）（英德文版）

The purpose of this study was to investigate the cortical bone thickness of the inter-dental area of both jaws for orthodontic miniscrew placement. The cone-beam computerized tomography images of 32 non-orthodontic adults with normal occlusion were taken to measure the cortical bone thickness in both jaws. One-way analysis of variance (ANOVA) was used to analyze the differences in cortical bone thickness. Buccal cortical bone in the mandible was thicker than that in the maxilla. In the maxilla, cortical bone thickness was thicker in the buccal side than in the palatal side. Buccal cortical bone thickness in the mandible was thickest at the site distal to the first molar, and in the maxilla it was thickest at the site mesial to the first molar, while in the palatal side of maxilla it was thickest at the site mesial to the second premolar. The changing pattern of cortical bone thickness varies at different sites. In the buccal side of maxilla, the thinnest cortical bone thickness was found to be at 4 mm level from the alveolar crest, while the thickest was at 10 mm level (except for the site mesial to the first premolar). The buccal cortical bone thickness at the sites mesial or distal to the first molar in the mandible and palatal cortical bone thickness of maxilla tended to increase with increasing distance from the alveolar bone.

Analysis about risk factors of autism disorder in 278 children / 中华实用儿科临床杂志

Objective To explore the high risk factors of the etiology of autism disorder.Methods Two hundred and seventy-eight children with autism disorder and 200 healthy children were investigated with self-designed questionnaire to obtain their demographic information,pre-and perinatal information,developmental information in toddler period.All the data were compared between autism group and healthy controls.Results 1.There were significant dif ferences in maternal prenatal data and perinatal data between autism group and healthy controls.Logistic regression analysis found that maternal/paternal reproductive age,family burden,caregiver,pregnancy reaction,drug administration in prenatal period,mode of delivery,chief instructor entered the regression equation.2.The 6 items in regression equation which had clinical significance consisted of maternal reproductive age above 30 years old [odds ratio (OR) =6.72],family history of mental disorders (OR =5.80),drug administration in prenatal period (OR =4.65),non-natural childbirth (OR =4.15),paternal reproductive age above 30 years old (OR =1.27),moderate or serious pregnancy reaction (OR =1.04).Conclusions The main risk factors of autism disorder in pre-and perinatal period consists of maternal reproductive age above 30 years old,positive family history of mental disorders,drug administration in prenatal period and non-natural childbirth.Avoiding these risk factors might contribute to reduce the incidence of autism.

Intrusion of overerupted maxillary molars with miniscrew implant anchorage: A radiographic evaluation / 华中科技大学学报（医学）（英德文版）

The aim of this retrospective study was to quantitatively evaluate the treatment effects of intrusion of overerupted maxillary molars using miniscrew implant anchorage and to investigate the apical root resorption after molar intrusion. The subjects included 30 patients whose average ages were 35.5±9.0 years. All patients had received intrusion treatments for overerupted maxillary molars with miniscrew anchorage. There were 38 maxillary first molars and 26 maxillary second molars to be intruded. Two miniscrews were inserted in the buccal and palatal alveolar bone mesial to the overerupted molar. Force of 100-150 g was applied by the elastic chains between screw head and attachment on each side. Lateral cephalograms and panoramic radiographs taken before and after intrusion were used to evaluate dental changes and root resorption of molars. Only 6 of the 128 miniscrews failed. The first and second molars were significantly intruded by averages of 3.4 mm and 3.1 mm respectively (P<0.001). The average intrusion time was more than 6 months. The crown of the molars mesially tilted by averages of 3.1 degrees and 3.3 degrees (P<0.001) for first and second molars. The amounts of root resorption were 0.2-0.4 mm on average. The intrusion treatment of overerupted molars with miniscrew anchorages could be used as an efficient and reliable method to recover lost restoration space for prosthesis. Radiographically speaking, root resorption of molars was not clinically significant after application of intrusive forces of 200 to 300 g.

Measurement of cortical bone thickness in adults by cone-beam computerized tomography for orthodontic miniscrews placement / 华中科技大学学报（医学）（英德文版）

The purpose of this study was to investigate the cortical bone thickness of the inter-dental area of both jaws for orthodontic miniscrew placement. The cone-beam computerized tomography images of 32 non-orthodontic adults with normal occlusion were taken to measure the cortical bone thickness in both jaws. One-way analysis of variance (ANOVA) was used to analyze the differences in cortical bone thickness. Buccal cortical bone in the mandible was thicker than that in the maxilla. In the maxilla, cortical bone thickness was thicker in the buccal side than in the palatal side. Buccal cortical bone thickness in the mandible was thickest at the site distal to the first molar, and in the maxilla it was thickest at the site mesial to the first molar, while in the palatal side of maxilla it was thickest at the site mesial to the second premolar. The changing pattern of cortical bone thickness varies at different sites. In the buccal side of maxilla, the thinnest cortical bone thickness was found to be at 4 mm level from the alveolar crest, while the thickest was at 10 mm level (except for the site mesial to the first premolar). The buccal cortical bone thickness at the sites mesial or distal to the first molar in the mandible and palatal cortical bone thickness of maxilla tended to increase with increasing distance from the alveolar bone.

Intrusion of overerupted maxillary molars with miniscrew implant anchorage: a radiographic evaluation / 华中科技大学学报（医学）（英德文版）

The aim of this retrospective study was to quantitatively evaluate the treatment effects of intrusion of overerupted maxillary molars using miniscrew implant anchorage and to investigate the apical root resorption after molar intrusion. The subjects included 30 patients whose average ages were 35.5±9.0 years. All patients had received intrusion treatments for overerupted maxillary molars with miniscrew anchorage. There were 38 maxillary first molars and 26 maxillary second molars to be intruded. Two miniscrews were inserted in the buccal and palatal alveolar bone mesial to the overerupted molar. Force of 100-150 g was applied by the elastic chains between screw head and attachment on each side. Lateral cephalograms and panoramic radiographs taken before and after intrusion were used to evaluate dental changes and root resorption of molars. Only 6 of the 128 miniscrews failed. The first and second molars were significantly intruded by averages of 3.4 mm and 3.1 mm respectively (P<0.001). The average intrusion time was more than 6 months. The crown of the molars mesially tilted by averages of 3.1 degrees and 3.3 degrees (P<0.001) for first and second molars. The amounts of root resorption were 0.2-0.4 mm on average. The intrusion treatment of overerupted molars with miniscrew anchorages could be used as an efficient and reliable method to recover lost restoration space for prosthesis. Radiographically speaking, root resorption of molars was not clinically significant after application of intrusive forces of 200 to 300 g.

Evaluation of palatal bone thickness in adults with normal occlusion for orthodontic miniscrews placement / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the palatal bone thickness in adult with normal occlusion.</p><p><b>METHODS</b>The cone beam computerized tomography records of 32 adults with normal occlusion (16 males and 16 females), mean age (30.1 ± 6.5) years, were used to measure the bone thickness at midpalatal area and the right and left palatal sides. Coronal slices at 3 mm intervals were generated. Slice 1 was the coronal slice through the posterior border to the incisive foramen, while Slice 7 was the coronal slice 18 mm away from the incisive foramen. At each coronal slice, the midpalatal sites were Site M and the sites on the exterior margin of the hard palatal were Site D. Four equally divided parts on the line linking Site M to Site D were named Site A, B, C from the interior to the exterior respectively. Palatal bone thickness were measured at these sites.</p><p><b>RESULTS</b>Significant differences were noted from Slice 1 to Slice 7, the bone thickness of palate tended to decrease from the front to the back. The thickest site at hard palatal was 12.6 mm, locating at Site D of Slice 1, while the thinnest site was 2.7 mm, locating at Site B of Slice 7. The palatal bone thickness ranged from 10.5 mm (maximum) to 5.8 mm (minimum) at Slice 2 and Slice 3. No statistical significance was found between the left and right sides (P > 0.05).</p><p><b>CONCLUSIONS</b>The favorable sites for miniscrew placement were the anterior region of the hard palate in adult. The length of miniscrew ranged from 5 mm to 10 mm can be placed from 6 mm posterior to the incisive foramen.</p>

Clinical application of miniscrew implant for maximum anchorage cases / 中华口腔医学杂志

<p><b>OBJECTIVE</b>The purpose of this study was to evaluate the efficiency of the self-drilling miniscrew implant for maximum anchorage cases.</p><p><b>METHODS</b>The study comprised 5 patients whose ages ranged from 14 to 31 years. All patients presented with. Class II skeletal pattern, maxillary protrusion or bimaxillary protrusion. Maximum molar anchorage and first premolar extraction were required. In the stage of anterior teeth retraction, self-drilling miniscrew implants were inserted into the buccal alveolar bone between maxillary second premolar and first molar. Sliding mechanics with 150 - 200 g force was used to retract anterior teeth. The cephalometric films before and after retraction were measured.</p><p><b>RESULTS</b>Dental protrusion and facial profile were improved significantly in all patients. The edge of upper incisors was retracted 6.4 mm and anchor molar moved anteriorly 0.3 mm averagely. All miniscrew implants remained stable during treatment and peri-implant soft tissue remained healthy.</p><p><b>CONCLUSIONS</b>Self-drilling minisrcew implant could be used as an efficient method for anchorage control and an alternative choice of extra-oral forces.</p>