RESUMEN
Bull ejaculates with sperm concentrations of less than 1 billion sperm sort poorly for sex chromosomes, but whether this is because of the sperm concentration or the concomitant seminal plasma content has not been elucidated. Experiments were conducted to determine why ejaculates with lower sperm concentrations sort poorly and develop a protocol to increase sorting efficiency. In Experiment I, spermatozoa at 160 or 240 × 106 sperm/mL were stained at 49, 65 or 81 µm Hoechst 33342 with 0 or 10% seminal plasma and then sex-sorted. In Experiment II, seminal plasma was adjusted to create samples with sperm concentrations of 0.7, 1.4 and 2.1 × 109 sperm/mL, prior to sex-sorting. In Experiment III, spermatozoa were diluted to 0.7, 1.4 and 2.1 × 109 sperm/mL using TALP containing 0 or 10% seminal plasma prior to sex-sorting and cryopreservation. In Experiment I, the optimal staining combination was 160 × 106 sperm/mL stained with 65 µm Hoechst 33342 and no seminal plasma. In Experiment II, the percentages of membrane-impaired sperm were lower for sample concentrations of 2.1 × 109 sperm/mL (15%) than for samples at 1.4 × 109 (17%) or 0.7 × 109 sperm/mL (18%; p < 0.01). The X sort rate was slower for samples stored at 0.7 × 109 sperm/mL (3.45 × 103 sperm/sec) than for samples stored at 1.4 × 109 and 2.1 × 109 sperm/mL (3.85 and 3.94 × 103 sperm/sec, respectively; p < 0.05). In Experiment III, samples containing 0% seminal plasma had higher percentages of live-oriented cells (54 vs. 50%; p < 0.05), fewer dead sperm (19 vs. 22%; p < 0.01) and higher post-thaw motility (41 vs. 35%; p < 0.05) than samples containing 10% seminal plasma. Ejaculates with high sperm concentrations result in superior sorting because these samples have less seminal plasma during staining than ejaculates with lower initial sperm concentrations as all samples are diluted to 160 × 106 sperm/mL for staining. Therefore, sorting efficiency appears to be affected by seminal plasma concentration, not by the original sperm concentration.
Asunto(s)
Separación Celular/métodos , Citometría de Flujo/métodos , Preservación de Semen/métodos , Semen/citología , Espermatozoides/citología , Animales , Bovinos , Masculino , Recuento de Espermatozoides , Motilidad Espermática/fisiologíaRESUMEN
The objective of this clinical trial was to compare conception and newborn calf sex ratios among Jersey heifers and lactating cows inseminated with either standard sex-sorted semen (low-dose, high-sort; LDHS) containing 2.1 × 10(6) sorted sperm at 90% purity or high-dose, low-sort (HDLS) semen containing 10 × 10(6) sorted sperm at 75% purity. After a specified voluntary waiting period (VWP), female subjects, consisting of nulliparous heifers (VWP 10 mo of age) and lactating cows (VWP 50d in milk), received their first service and were systematically allocated to each treatment group in the order in which they presented for artificial insemination (AI). Females were bred to the same sire and type of sex-sorted semen for up to 2 additional services. Animals that were not pregnant after 3 breeding attempts were excluded. A total of 1,846 services were performed on 1,011 eligible females (LDHS; n=494, HDLS; n=517), which consisted of 516 nulliparous heifers and 495 lactating cows. Study groups were comparable with respect to the mean age at first AI for nulliparous heifers and the mean days in milk at first AI for parous cows. Insemination with HDLS semen did not result in a higher proportion of pregnancies per AI (P/AI) compared with LDHS semen for either nulliparous heifers (P/AI=43 vs. 38%) or parous cows (P/AI=47 vs. 43%). Insemination of nulliparous heifers using HDLS resulted in a lower proportion of newborn female calves compared with those bred to LDHS (76% vs. 87%). Similarly, lactating cows bred to HDLS gave birth to a lower proportion of newborn female calves compared with those bred to LDHS (79 vs. 90%). The odds ratio for a female calf to be born to an animal inseminated with HDLS compared with LDHS was 0.32 for nulliparous heifers and 0.19 for parous cows. Overall, the use of HDLS resulted in fewer females compared with LDHS, which may be explained by the lower concentration of X-bearing spermatozoa in HDLS compared with LDHS.
Asunto(s)
Bovinos , Industria Lechera/métodos , Fertilización , Semen/fisiología , Razón de Masculinidad , Espermatozoides/fisiología , Animales , California , Femenino , Lactancia , Modelos Logísticos , MasculinoRESUMEN
The objective was to determine which characteristics of bovine ejaculates affected efficacy of sex sorting bovine sperm by flow cytometry. The effects of first versus second ejaculates, seminal plasma content, addition of BSA, and seminal plasma from different bulls during staining were all studied, as was the effect of 8-hour storage with and without seminal plasma. Semen collected by artificial vagina was centrifuged at 1000 ×g for 15 minutes to separate sperm from seminal plasma; seminal plasma was clarified by 10 minutes of additional centrifugation at 2000 ×g. Sperm were rediluted to 160 × 10(6) sperm per mL with: Tyrode's medium plus albumin, lactate, and pyruvate (TALP) containing 0%, 5%, 10%, or 20% homologous seminal plasma, TALP containing 10% heterologous seminal plasma, or TALP containing 0.3% (control), 0.6%, or 1.2% BSA. After incubation with Hoechst 33342 for 45 minutes, an equal volume of TALP containing red food dye was added, and sperm were analyzed by flow cytometry/cell sorting to determine percent of live-oriented sperm, X sort rate, percent of membrane-impaired sperm, and split (degree of separation between X- and Y-bearing sperm populations). The percent of live-oriented sperm was higher for sperm incubated with 0% seminal plasma (64%) than for sperm incubated with 5%, 10%, or 20% seminal plasma (60%, 59%, and 58%, respectively; P < 0.05). The X sort rate was higher for sperm incubated with 0% seminal plasma than sperm with 20% seminal plasma (4.26 vs. 3.61 × 10(3) sperm per second). When seminal plasma was exchanged between bull ejaculates, only one bull had seminal plasma that was detrimental to sperm, resulting in 31% membrane-impaired sperm compared with a range of 16% to 19% for seminal plasmas from other bulls (P < 0.05). The addition of BSA did not affect sort efficiency at the concentrations studied. Sperm from six bulls stored for 8 hours without seminal plasma had more membrane-impaired sperm (which were discarded) during sorting (28%) than with seminal plasma (19%; P < 0.01), but higher postthaw motility postsorting (63%) than with seminal plasma (52%; P < 0.05). In conclusion, the presence of seminal plasma during staining and sorting decreased sort rates and percent of live-oriented sperm, and storing sperm without seminal plasma increased postthaw motility.
Asunto(s)
Bovinos , Separación Celular/veterinaria , Semen/fisiología , Preselección del Sexo/veterinaria , Espermatozoides/citología , Animales , Bencimidazoles , Separación Celular/métodos , Citometría de Flujo/veterinaria , Colorantes Fluorescentes , Masculino , Preselección del Sexo/métodos , Motilidad EspermáticaRESUMEN
This study examined DNA damage and postthaw motility of white-tailed deer sperm (n = 28) before and after sex selection and conventional sorting using MoFlo XDP SX flow cytometry. Semen samples from the same individuals were treated in 4 different ways: 1) chilled-extended sperm samples (without glycerol); 2) cryopreserved conventional samples, samples directly cryopreserved after the addition of extenders; 3) cryopreserved conventionally sorted samples, sorted samples to remove the dead sperm subpopulation; and 4) cryopreserved sex-sorted samples; sorted samples to remove the dead sperm subpopulation and separation of X- and Y-chromosome-bearing sperm. In all the cases (n = 6), conventional samples showed decreased postthaw motilities (43 ± 26%) when compared with X-sorted samples (59 ± 20%; P < 0.05) and Y-sorted samples (54 ± 20%; P > 0.05). The DNA fragmentation baseline was <5% for frozen-thawed conventional samples, but even less after sex sorting and conventional sorting: 2.4 and 1.7%, respectively. On the other hand, conventional samples showed greater (P < 0.05) DNA fragmentation than the sex-sorted sperm (n = 6) at 96 h (average of 4.8 ± 4.5% and 5.3 ± 4%, respectively). Conventionally sorted samples (n = 8) did not have greater (P > 0.05) DNA fragmentation when compared with the sex-sorted samples. Fragmentation of DNA on X-chromosome and Y-chromosome-bearing sorted sperm were not significantly different (n = 10, P > 0.05) after 96 h (2.6 ± 3.6% and 2.2 ± 0.5%, respectively). Future research should be implemented for examining the fertilizing potential of sex-sorted white-tailed deer sperm (e.g., AI fertility trials).
Asunto(s)
Fragmentación del ADN , Ciervos/fisiología , Citometría de Flujo/veterinaria , Preselección del Sexo/veterinaria , Espermatozoides/citología , Animales , Criopreservación/veterinaria , Masculino , Preservación de Semen/veterinariaRESUMEN
Computer-assisted sperm analysis of fresh and frozen-thawed bovine sperm requires proper handling and preparation, and the type of slide used in the assessment is critical if the resultant data are to be useful quality control measurements. In the present study, 4 different slide viewing chambers, a Makler chamber, a clean slide-coverslip, or a 2- or 4-cell chamber Leja slide, were compared with assess their utility in providing reliable measurements of sperm motility variables. A Hamilton-Thorne IVOS Computer-Assisted Semen Analyzer (CASA) was the instrument used to determine sperm measurements utilizing the 4 different chambers. Fifty-eight different freeze batches of bovine semen that had been collected from 47 bulls at 7 sites that sex-sort sperm using Sexing Technologies sorting criteria were incorporated into the trial. Neither the percentage of motile sperm nor the percentage of progressively motile sperm differed for the Makler chamber vs. slide-coverslip comparisons. Similarly, total and progressively motile sperm did not differ between the 2- and 4-cell chambered Leja slides. However, total and progressive motility of sperm determined with the Makler chamber and slide-coverslip were greater (P < 0.0001) than motilities recorded by the 2- or 4-cell chambered Leja slides. Based on the results, the type of viewing chamber can affect the range of sperm motility values when CASA is used for quality control evaluations of thawed, cryopreserved sex-sorted sperm samples.
Asunto(s)
Bovinos/fisiología , Semen/fisiología , Recuento de Espermatozoides/veterinaria , Motilidad Espermática/fisiología , Animales , Masculino , Recuento de Espermatozoides/instrumentación , Recuento de Espermatozoides/métodosRESUMEN
Ejaculates were collected by artificial vagina from 3 Holstein sires and sorted to 90% purity for X-chromosome-bearing spermatozoa (range 88 to 93%) using flow cytometry. Sorted sperm were diluted to 2.1, 3.5, or 5.0 x 10(6) sperm per dose in an egg yolk (20%), Tris, glycerol (7%) extender. Collections were repeated until >600 straws per sperm dose per sire were obtained. Each sperm dose was loaded into color-coded 0.25-mL French straws, with alternate colors used to define treatments across sires. Within sires, straws were packaged at 9 per cane (3 of each color) and strategically allocated to 75 Holstein herds with targets for 50% use in heifers and 50% in lactating cows. Straw color was recorded in the on-farm record-keeping system at the time of insemination. Data were analyzed separately for cows and heifers. Among heifers, a total of 2,125 usable records were retrieved from 51 herds (238 +/- 5.5 services/ sperm dose per sire, range: 218 to 263). Conception rates in heifers were influenced by the sire x sperm dosage interaction. Within sire A, conception rates of heifers were greater for the 5 x 10(6) (59.5%) than for the 2.1 x 10(6) (46.4%) sperm dose and intermediate for the 3.5 x 10(6) sperm dose (52.2%). However, across sires, sperm dosage had no effect on heifer conception rates (46.7, 51.2, and 52.5% for the 2.1, 3.5, and 5.0 x 10(6) sperm dosages, respectively). Among cows, a total of 2,369 services were retrieved from 56 herds (263 +/- 8.8 services/sperm dose per sire, range: 233 to 303). Conception rates of cows (29.4%) were not affected by sire or sperm dosage (27.0, 29.1, and 30.3% for the 2.1, 3.5, and 5.0 x 10(6) sperm dosages, respectively). In conclusion, these data indicate that an increased sperm dosage may enhance virgin heifer conception rates for some (but not all) sires, whereas neither sire nor sexed-sperm dosage affected conception rates of lactating cows. Additional studies of sexed-sperm dosage across a larger sampling of bulls are warranted to determine whether and how such a practice can be implemented cost effectively for the benefit of the dairy industry.
Asunto(s)
Bovinos , Separación Celular , Industria Lechera/métodos , Preselección del Sexo/veterinaria , Espermatozoides/clasificación , Espermatozoides/citología , Animales , Industria Lechera/economía , Femenino , Fertilización , Inseminación Artificial/métodos , Inseminación Artificial/veterinaria , Lactancia , Masculino , Paridad , Embarazo , Preselección del Sexo/métodos , Recuento de EspermatozoidesRESUMEN
A novel copolymer that consisted of 3-hydroxyvalerate and 4-hydroxybutyrate, P(3HV-co-4HB), was synthesized in Hydrogenophaga pseudoflava by growing it in media containing gamma-valerolactone and gamma-butyrolactone as a carbon source. The monomer ratio in the copolymer was changed by altering the feed ratio of the two lactones. The cultivation technique was composed of three steps: the first-step for high cell production in Luria-Bertani medium, the second-step for intracellular degrading removal of poly(3-hydroxybutyrate) (P(3HB)), which was formed in the first step, by culturing the cells in carbon-source-free medium, and the final step for accumulation of P(3HV-co-4HB) in a mixed lactone medium. All the P(3HV-co-4HB) copolymers contained less than 1 mol % of 3HB unit. These copolymers were characterized by NMR spectroscopy, differential scanning calorimetry, wide-angle X-ray diffraction, and first-order kinetic analysis of intracellular degradation. The copolymer with an approximately equal ratio of the comonomers was found amorphous. The NMR microstructural analysis showed that the copolymers contained appreciable amounts of 3HV-rich or 4HB-rich chains. The (13)C NMR splitting patterns associated with the four carbons in the 4HB unit of P(3HV-co-4HB) bear close resemblance to those observed in the 4HB unit of P(3HB-co-4HB). The signals arising from the carbons in the 3HV unit of P(3HV-co-4HB) split in a manner similar to those in the 3HB unit of P(3HB-co-4HB). Thus the sequences were assigned by comparing the NMR splittings for P(3HV-co-4HB) with those for P(3HB-co-4HB) and P(3HB-co-3HV). The sequence assignment was further checked by comparing the signal intensities before and after degradation of the copolymers. This was considered reasonable because the H. pseudoflava intracellular PHA depolymerase is more specific to the 3HV unit than to the 4HB unit, which was also confirmed by the higher degradation rate constant for the 3HV unit in the first-order kinetic analysis.
Asunto(s)
Burkholderia/metabolismo , Poliésteres/síntesis química , Poliésteres/farmacocinética , Biodegradación Ambiental , Rastreo Diferencial de Calorimetría , Indicadores y Reactivos , Espectroscopía de Resonancia Magnética , Poliésteres/química , Especificidad por Sustrato , Difracción de Rayos XRESUMEN
Synthesis of an alpha,beta-alkyl branched polyester, i.e., poly(2-methyl-3-hydroxyoctanoate), has been accomplished via anionic polymerization of alpha-methyl-beta-pentyl-beta-propiolactone mediated by supramolecular complexes of potassium methoxide or potassium hydroxide, respectively. The structure of resulting polymers has been established by electrospray ionization multistage mass spectrometry (ESI-MSn), FT-IR, NMR, and GPC analyses. Previously proposed addition-elimination mechanism of the polymerization of beta-lactones containing alpha-hydrogen by alkoxide anion has been confirmed to operate also in the case of beta-lactone having alkyl substituents in both alpha and beta positions.
Asunto(s)
Poliésteres/síntesis química , Métodos , Estructura Molecular , Poliésteres/química , Propiolactona/análogos & derivados , Propiolactona/química , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
Using organically synthesized hydroxyalkanoate coenzyme A thioesters, the activities of two short-chain polyhydroxalkanoate (PHA) synthases were investigated--Ralstonia eutropha PHA synthase (a type I PHA synthase) and Ectothiorhodospira shaposhnikovii PHA synthase (a type III synthase). The results indicate that the two synthases have similar activities towards most of the monomers tested. 3-Hydroxybutyryl CoA was found to be the most efficient substrate for both synthases. Changes in the side-chain length of the monomers affect monomer reactivity, with shortening of the side-chain length having the more severe effect. Hydrophobicity in the side chain appears to play an important role in the catalytic reaction. The configuration and the position of the hydroxyl group also affect the reactivity of a monomer. Monomers with the [S] configuration can not be recognized by either synthase. Moving the hydroxyl group from the beta carbon to the alpha carbon has a much more severe effect on the reactivity of the monomer than moving the hydroxyl group to the gamma carbon. The results demonstrate that the in vitro system can be used to prepare entirely novel polymers that may not be obtainable from living cells because of metabolic restrictions.
Asunto(s)
Aciltransferasas/metabolismo , Acilcoenzima A/metabolismo , Relación Estructura-Actividad , Especificidad por SustratoRESUMEN
Bacterial polyesters have been found to have useful properties for applications as thermoplastics, elastomers, and adhesives and are biodegradable and biocompatible. Poly(3-hydroxyalkanoates) (PHAs) and poly(beta-malate) are the most representative polyesters synthesized by microorganisms. PHAs containing a wide variety of repeating units can be produced by bacteria, including those containing many types of pendant functional groups which can be synthesized by microorganisms that are grown on unnatural organic substrates. Poly(beta-malate) is of interest primarily for medical applications, especially for drug delivery systems. In this chapter, the bacterial production and properties of poly(3-hydroxyalkanoates) and poly(beta-malate) are described with emphasis on the former.
Asunto(s)
Poliésteres/química , Poliésteres/metabolismo , Aciltransferasas/química , Bacterias/química , Sistemas de Liberación de Medicamentos , Malatos/química , Modelos Biológicos , Modelos Químicos , Polímeros/químicaRESUMEN
In situ poly(hydroxyalkanoate) (PHA) levels and repeating-unit compositions were examined in stratified photosynthetic microbial mats from Great Sippewissett Salt Marsh, Mass., and Ebro Delta, Spain. Unlike what has been observed in pure cultures of phototrophic bacteria, the prevalence of hydroxyvalerate (HV) repeating units relative to hydroxybutyrate (HB) repeating units was striking. In the cyanobacteria-dominated green material of Sippewissett mats, the mole percent ratio of repeating units was generally 1HB:1HV. In the purple sulfur bacteria-dominated pink material the relationship was typically 1HB:2HV. In Sippewissett mats, PHA contributed about 0.5 to 1% of the organic carbon in the green layer and up to 6% in the pink layer. In Ebro Delta mats, PHA of approximately 1HB:2HV-repeating-unit distribution contributed about 2% of the organic carbon of the composite photosynthetic layers (the green and pink layers were not separated). Great Sippewissett Salt Marsh mats were utilized for more extensive investigation of seasonal, diel, and exogenous carbon effects. When the total PHA content was normalized to organic carbon, there was little seasonal variation in PHA levels. However, routine daily variation was evident at all sites and seasons. In every case, PHA levels increased during the night and decreased during the day. This phenomenon was conspicuous in the pink layer, where PHA levels doubled overnight. The daytime declines could be inhibited by artificial shading. Addition of exogenous acetate, lactate, and propionate induced two- to fivefold increases in the total PHA levels when applied in the daylight but had no effect when applied at night. The distinct diel pattern of in situ PHA accumulation at night appears to be related, in some phototrophs, to routine dark energy metabolism and is not influenced by the availability of organic nutrients.
Asunto(s)
Fotosíntesis , Microbiología del Agua , Agua/análisis , Alcanos/análisis , Biopelículas , Hidroxibutiratos/análisis , Massachusetts , Estaciones del Año , España , Valeratos/análisisRESUMEN
Purified Ralstonia eutropha polyhydroxybutyrate (PHB) synthase from recombinant cells can exist as monomer and dimer. The polymerization reaction catalyzed by this enzyme displays a lag phase, which causes difficulties for kinetic and mechanistic characterization of the enzymatic polymerization reaction. In this study, we developed a method to eliminate the lag phase of PHB synthase by physical means, i.e., adding multihydroxyl compounds to the enzyme solution. This method allows us to recognize the nature of the lag phase as a physical rather than a chemical process. With such lag-phase-free-enzyme, the kinetic properties of the enzyme were investigated. The results indicate that 3-hydroxybutyryl-CoA (3HBCoA) is the optimal substrate for the enzyme. A slower catalytic rate and lower binding ability account for a lower reactivity of 3-hydroxyvaleryl-CoA (3HVCoA) compared to that of 3HBCoA. The change of hydroxyl group from the beta to the gamma position causes dramatic decreases in the binding ability of 4-hydroxybutyryl-CoA (4HBCoA). By using a dilution strategy and size exclusion chromatographic technique, the active form of the enzyme was identified to be the dimeric form. The number of catalytic sites in the dimeric form of the enzyme was examined by comparing the molecular weight of polyhydroxybutyrate as a function of substrate-to-enzyme ratio. The results suggest that the dimeric enzyme has only one catalytic site. A revised model of polymerization reaction catalyzed by R. eutropha PHB synthase is described.
Asunto(s)
Aciltransferasas/química , Proteobacteria/enzimología , Catálisis , Cromatografía en Gel , Coenzima A/química , Medios de Cultivo , Concentración de Iones de Hidrógeno , Cinética , Peso Molecular , Proteobacteria/crecimiento & desarrolloRESUMEN
The poly(3-hydroxybutyrate) (PHB) synthase of Ralstonia eutropha, which was produced by a recombinant strain of Escherichia coli and purified in one step with a methyl-HIC column to a purity of more than 90%, was used to polymerize 3-hydroxypropionyl-CoA (3HPCoA) and to copolymerize 3HPCoA with 3-hydroxybutyryl-CoA (3HBCoA). A Km of 189 microM and a kcat of 10 s-1 were determined for the activity of the enzyme in the polymerization reaction of 3HPCoA based on the assumption that the dimer form of PHB synthase was the active form. Free coenzyme A was found to be a very effective competitive inhibitor for the polymerization of 3HPCoA with a Ki of 85 microM. The maximum degree of conversion of 3HPCoA to polymer was less than 40%. In the simultaneous copolymerization reactions of these two monomers, both the turnover number for the copolymerization reaction and the maximum degree of conversion of 3HPCoA and 3HBCoA to copolymers increased with an increase in the amount of 3HBCoA in the monomer mixture. However, the maximum conversion of 3HPCoA to copolymer was always less than 35%, regardless of the ratio of 3HPCoA to 3HBCoA. Block copolymers were obtained by the sequential copolymerization of the two monomers and these copolymers had a much narrower molecular weight distribution than those obtained by the simultaneous copolymerization for the same molar ratio of 3HPCoA to 3HBCoA.
Asunto(s)
Aciltransferasas/química , Aciltransferasas/aislamiento & purificación , Coenzima A/química , Escherichia coli/metabolismo , Cinética , Espectroscopía de Resonancia Magnética , Peso MolecularRESUMEN
The mechanism of the enzymatic degradation of poly([R]-3-hydroxybutyrate) (PHB) was investigated by using well-defined model substrates, including both linear and cyclic [R]-3-hydroxybutyrate (3HB) and [R]-3-hydroxyvalerate (3HV) oligomers, with two different PHB depolymerases. The linear and cyclic oligomers containing from 2 to 10 repeating units were hydrolyzed in solutions of the depolymerase isolated from Aspergillus fumigatus and Alcaligenes faecalis, and the rates of hydrolysis and types of products formed were characterized. Both of the depolymerases catalyzed the hydrolysis of the cyclic oligomers (macrolides) which contained more than three 3HB and 3HV repeating units. The degradation reactions of the linear and cyclic 3HB oligomers with the A. fumigatus depolymerase gave similar ratios of monomer-to-dimer products, but PHB itself formed mostly monomer on hydrolysis, indicating that the enzymatic hydrolysis reactions occurred by different mechanisms for these different types of substrates. The results of this study conclusively show that at least the endo mode of polymer hydrolysis occurs with the two enzymes studied, while the A. fumigatus depolymerase was found to utilize both endo and exo modes of hydrolysis to efficiently degrade PHB and 3HB oligomers.
Asunto(s)
Ácido 3-Hidroxibutírico/química , Hidrolasas de Éster Carboxílico/química , Alcaligenes/enzimología , Aspergillus fumigatus/enzimología , Escherichia coli/enzimología , Hidrólisis , Cinética , Macrólidos/química , Modelos Químicos , Polímeros/químicaRESUMEN
The in vitro degradation of isolated Pseudomonas oleovorans inclusion bodies containing either poly-3-hydroxynonanoate (PHN), or poly(-3-hydroxy-5-phenylvalerate) (PHPV), or a mixture of these two polymers was investigated. When incubated at 30 degrees C and pH 9, inclusion bodies containing either polyhydroxyoctanoate (PHO), PHN or PHPV exhibited similar degradation rates of approximately 0.94 (+/- 3%) mg/h. The PHN and PHPV components for inclusion bodies containing a mixture of PHN and PHPV showed similar degradation rates; that is the ratios showed little change and remained at approximately 50 wt.% (+/- 3%) for each component. These results contrast markedly with in vivo studies for similar inclusion bodies in whole cells. The results suggest that the synthesis and degradation of these novel polyhydroxyalkanoates by P. oleovorans proceeds by the same enzymatic pathway. In addition, comparisons between the in vivo and in vitro polymer degradation suggest that the activity of the intracellular depolymerase does not control the rate limiting step of PHPV degradation in vivo. Instead, the presence of an aromatic group in the repeating units of this polymer may inhibit the utilization of the monomeric units of PHPV as a reserve carbon source by the cells.
Asunto(s)
Cuerpos de Inclusión/química , Cuerpos de Inclusión/enzimología , Pseudomonas/citología , Proteínas Bacterianas/análisis , Proteínas Bacterianas/química , Proteínas Bacterianas/aislamiento & purificación , Poliésteres/química , Poliésteres/metabolismo , Polímeros/química , Polímeros/metabolismo , Especificidad por SustratoRESUMEN
The sequence distributions of two microbial copolyesters obtained by fermentation of Rhodospirillum rubrum, grown with 3-hydroxyhexanoic or 3-hydroxyheptanoic acids, were determined by analyzing the oligomers prepared by partial pyrolysis or partial methanolysis of these copolyesters using fast atom bombardment mass spectrometry (FAB-MS). Oligomers up to pentamers were identified in the case of partial pyrolysis and up to tetradecamers in the case of partial methanolysis. The comparison between the experimental and calculated peak intensities of FAB mass spectra allows the calculation of compositions and sequence distributions, which in these copolyesters follow Bernoullian statistics, indicating that they are random terpolyesters.
Asunto(s)
Biopolímeros/biosíntesis , Biopolímeros/química , Caproatos/metabolismo , Rhodospirillum rubrum/química , Rhodospirillum rubrum/metabolismo , Ácidos Heptanoicos/metabolismo , Espectroscopía de Resonancia Magnética , Estructura Molecular , Espectrometría de Masa Bombardeada por Átomos VelocesRESUMEN
The present study examined the biocompatibility and degradation properties of poly (beta-hydroxy octanoate) (PHO) as an impregnation substrate on arterial prostheses. PHO-impregnated polyester grafts sterilized by ethylene oxide (EO) or gamma (gamma) radiation, and polyester Dacron(R) prostheses impregnated with fluoropolymer, gelatin, or albumin were implanted subcutaneously in rats for periods ranging from 2 to 180 days. The biocompatibility was assessed by quantifying the alkaline and acid phosphatase secretion while performing histological studies at the tissue/prosthesis interface. The degradation was determined by chemical analysis of the EO and gamma-sterilized PHO after implantation using differential scanning calorimetry (DSC), wide angle x-ray diffraction (WAXD), and size exclusion chromatography (SEC). Alkaline phosphatase activity by the sterilized PHO and by the gelatin and albumin grafts was significantly elevated early after implantation in contrast to that of the Dacron and fluoropolymer grafts that occurred later, at 7 and 5 days, respectively The peak of acid phosphatase activity for all of the grafts occurred between 5 and 10 days postimplantation, with the gamma-sterilized PHO grafts recording the greatest activity. Histological study revealed that the tissue incorporation into the graft wall was earlier and more complete for the Dacron and fluoropolymer grafts after 6 months than for the gelatin and albumin grafts, because the latter induced important inflammatory reactions during the resorption of the cross-linked protein substrates. The EO and gamma-sterilized PHO grafts exhibited a similar healing sequence characterized by the development of a collagenous tissue surrounding the prostheses. However, no infiltration of tissue into the graft wall was observed after 6 months, mainly because of the presence of the PHO. Degradation of the EO and gamma-sterilized PHO occurred preferentially by a hydrolytic mechanism as shown by a 30% molecular weight decrease after 6 months. In conclusion, PHO showed good biocompatibility in terms of enzyme activity and tissue reaction. Degradation was a slow, in vivo process controlled primarily by a random hydrolytic reaction and by a local enzymatic attack by macrophages and giant cells.
Asunto(s)
Materiales Biocompatibles/farmacocinética , Prótesis Vascular , Poliésteres/farmacocinética , Adhesivos Tisulares , Fosfatasa Ácida/análisis , Fosfatasa Alcalina/análisis , Animales , Materiales Biocompatibles/química , Biodegradación Ambiental , Rastreo Diferencial de Calorimetría , Femenino , Poliésteres/química , Tereftalatos Polietilenos , Ratas , Ratas Sprague-Dawley , Factores de TiempoRESUMEN
Previous investigations on the role of the polymerase in the synthesis of poly-3-hydroxybutyrate (PHB) are reviewed, and the results from earlier in vitro studies on the activity and selectivity of the polymerase of Alcaligenes eutrophus are discussed. In the present study the effect of glycerol on stabilizing the polymerase after purification and on eliminating the lag phase in in vitro polymerization reactions of 3-hydroxybutyl CoA (HBCoA), and 3-hydroxyvaleryl CoA (HVCoA) are described. K(M) values were determined for the activity of the polymerase with both HBCoA and HVCoA, and the rates of propagation for both monomers were estimated. With a racemic mixture of HBCoA, the enzyme polymerized only the [R] monomer.
Asunto(s)
Aciltransferasas/metabolismo , Alcaligenes/enzimología , Hidroxibutiratos/metabolismo , Poliésteres/metabolismo , Acilcoenzima A/metabolismo , Cinética , Especificidad por SustratoRESUMEN
The PHA-degrading isolate, strain P37C, was enriched from residential compost for its ability to hydrolyze the medium chain length PHA, poly(beta-hydroxyoctanoate) (PHO). It was subsequently found to grow on a wide range of PHAs, including both short chain length and medium chain length PHAs. The isolate was identified as belonging to the genus Comamonas. Strain P37C formed clear zones on poly(beta-hydroxybutyrate) (PHB), (PHO) and poly(beta-hydroxyphenylvalerate) (PHPV) overlay plates. PHA clear zone tubes were prepared using seven different kinds of PHAs, ranging from PHB with four-carbon repeating units, to poly(beta-hydroxyoctanoate-co-beta-hydroxyundecanoate) (PHOU) with 8- and 11-carbon repeating units. There was a direct correlation between PHA side chain length and rate of hydrolysis of the PHAs. A series of PHOUs containing varying percentages of unsaturated bonds were used to make a series of epoxidized PHOUs (PHOEs) with varying percentages of epoxy functions. Results of clear zone tube assays showed that these functionalized PHAs were all biodegradable by strain P37C, and there was no apparent correlation between rate of biodegradation and the proportion of functional groups in the PHAs. Biodegradability of these PHAs was verified using respirometry and enzyme assays. Cell-free supernatants containing activity toward PHAs were prepared, and strain P37C was shown to synthesize at least two distinct PHA depolymerases for the hydrolysis of SCL and MCL PHAs.
Asunto(s)
Hidrolasas de Éster Carboxílico/metabolismo , Bacilos y Cocos Aerobios Gramnegativos/metabolismo , Poliésteres/metabolismo , Bacilos y Cocos Aerobios Gramnegativos/crecimiento & desarrollo , Cinética , Relación Estructura-Actividad , Especificidad por SustratoRESUMEN
A Hydrogenophaga pseudoflava strain was able to synthesize poly(3-hydroxybutyric acid-co-4-hydroxybutyric acid) [P(3HB-co-4HB)] having a high level of 4-hydroxybutyric acid monomer unit (4HB) from gamma-butyrolactone. In a two-step process in which the first step involved production of cells containing a minimum amount of poly(3-hydroxybutyric acid) [P(3HB)] and the second step involved polyester accumulation from the lactone, approximately 5 to 10 mol% of the 3-hydroxybutyric acid (3HB) derived from the first-step culture was unavoidably reincorporated into the polymer in the second cultivation step. Reincorporation of the 3HB units produced from degradation of the first-step residual P(3HB) was confirmed by high-resolution 13C nuclear magnetic resonance spectroscopy. In order to synthesize 3HB-free poly(4-hydroxybutyric acid) [P(4HB)] homopolymer, a three-stage cultivation technique was developed by adding a nitrogen addition step, which completely removed the residual P(3HB). The resulting polymer was free of 3HB. However, when the strain was grown on gamma-butyrolactone as the sole carbon source in a synthesis medium, a copolyester of P(3HB-co-4HB) containing 45 mol% 3HB was produced. One-step cultivation on gamma-butyrolactone required a rather long induction time (3 to 4 days). On the basis of the results of an enzymatic study performed with crude extracts, we suggest that the inability of cells to produce 3HB in the multistep culture was due to a low level of 4-hydroxybutyric acid (4HBA) dehydrogenase activity, which resulted in a low level of acetyl coenzyme A. Thus, 3HB formation from gamma-butyrolactone is driven by a high level of 4HBA dehydrogenase activity induced by long exposure to gamma-butyrolactone, as is the case for a one-step culture. In addition, intracellular degradation kinetics studies showed that P(3HB) in cells was completely degraded within 30 h of cultivation after being transferred to a carbon-free mineral medium containing additional ammonium sulfate, while P(3HB-co-4HB) containing 5 mol% 3HB and 95 mol% 4HB was totally inert in interactions with the intracellular depolymerases. Intracellular inertness could be a useful factor for efficient synthesis of the P(4HB) homopolymer and of 4HB-rich P(3HB-co-4HB) by the strain used in this study.