RESUMEN
Molecular switches are chemical compounds exhibiting the possibility of reversible transformations between their different forms accompanied by a modification in their properties. Among these, switching of multi-addressable Benzazolo-OXazolidines (BOXs) from a closed form to an open form results in drastic modifications in their linear and nonlinear optical properties. Here, we target molecules containing two identical BOX units (DiBOX) connected by different π-conjugated linkers, and we combine synthesis, UV/visible absorption, and hyper-Rayleigh scattering (HRS) measurements, together with density functional theory (DFT) calculations. Three derivatives have been considered, which differ by the linker: (i) a bithiophene moiety (Bt), (ii) two 3,4-ethylenedioxythiopene (EDOT) units, and (iii) a triad composed of an EDOT-thiophene-EDOT sequence (TtO). As a matter of fact, these systems can adopt three states (CF-CF, POF-POF, and CF-POF) depending on the closed form (CF) or the protonated open form (POF) of each BOX unit. Despite chemical equivalence, stepwise switching of such systems under the addition of a chemical acid or an oxidant has been experimentally evidenced for two of them (DiBOX-Bt and DiBOX-TtO). Then, DFT calculations show that the first BOX opening leads to the formation of a push-pull π-conjugated segment, exhibiting a huge increase in the first hyperpolarizability (ß) and a bathochromic shift with respect to the fully closed form. On the contrary, the second BOX opening induces not only a slight bathochromic shift but also a reduction in their ß values conferring the great and uncommon abilities to modulate their linear and nonlinear properties over three discrete levels. Among these results, those on DiBOX-Bt agree with the experimental data obtained by HRS measurements and further shed light on their structure-property relationship.
RESUMEN
Combining different molecular switching functions in a single molecule is a simple strategy to develop commutable molecules featuring more than two commutation states. The present study reports on two molecular systems consisting of two indolino-oxazolidine (Box) moieties connected to an aromatic bridge (phenyl or bithiophene) by ethylenic junctions. Such systems, referenced as BiBox, are expected to show up multiaddressable and multiresponsive behaviors. On one hand, the oxazolidine ring opening/closure of Box moieties can be addressed by chemical stimuli, and on the other hand, the trans-to-cis isomerization of the ethylenic junctions is induced by visible light irradiation (with a thermal back conversion). NMR and UV-visible spectroscopies allowed to characterize up to nine out of the ten theoretically expected commutation states as well as to measure the kinetics of the interconversions. Also, steady state fluorescence spectroscopy measurements highlighted the strong influence of the open/closed states of the Box moieties on their emission properties.
RESUMEN
The synthesis of heterocyclic spirobifluorene (SBF) analogs generally requires long and complicated synthetic pathways. Despite this synthetic effort, such structural modification allows the (opto)electronic properties of this remarkable three-dimensional node to be tuned especially for molecular electronic applications. For this reason, the development of a simple, robust, and efficient synthetic methodology to introduce various heterocycles in place of classical phenyl rings in the spirofluorene motif is highly and timely desirable. In this context, we describe herein our efforts to develop a straightforward and efficient synthesis leading to replacement of 2 phenyl rings by various heterocycles in spiro compounds from 2,2'-dibromobenzophenone. As the same procedure to form fully heterocyclic compounds failed, an original theoretical approach based mainly on the uncommon Fukui dual function was developed in order to determine clearly the limitation of this strategy and provide an efficient predictive tool. Indeed, such calculation allows prediction of the thermodynamic and kinetic aspects of the synthesis of spiro derivatives using a double aromatic electrophilic substitution. If this procedure reproduces well our experimental results focused on (heterocyclic) SBF compounds, it can be certainly adapted and generalized to other intramolecular substitutions.
RESUMEN
Several alternatives are currently investigated to prevent and control the natural process of colonization of any seawater submerged surfaces by marine organisms. Since few years we develop an approach based on addressable electroactive coatings containing conducting polymers or polymers with lateral redox groups. In this article we describe the use of a screen-printed plate formed by 96 three-electrode electrochemical cells to assess the potential of these electroactive coatings to prevent the adhesion of marine bacteria. This novel platform is intended to control and record the redox properties of the electroactive coating in each well during the bioassay (15 h) and to allow screening its antiadhesion activity with enough replicates to support significant conclusions. Validation of this platform was carried out with poly(ethylenedioxythiophene) (PEDOT) as electroactive coating obtained by electropolymerization of EDOT monomer in artificial seawater electrolyte on the working electrode of each electrochemical cell of the 96-well microplate.
RESUMEN
Small push-pull molecules were synthesized in high yields by connecting a N-methyl or N-phenyl substituted thieno[2,3-b]indole electron-donating block directly to a 2,2-dicyanovinyl or (1-(dicyanomethylene)-3-oxo-1-inden-2-ylidene)methyl electron-withdrawing group. The effects of the N-substitution on thieno[2,3-b]indole and the nature of the electron-accepting group on the electrochemical, optical, and charge-transport properties were investigated by cyclic voltammetry, UV-vis spectroscopy, and the space-charge-limited current method, respectively. These results, together with the 1% power conversion efficiency of a bilayer solar cell prepared with the smallest compound of the series, show the potential of thieno[2,3-b]indole for organic electronics.
RESUMEN
A series of push-pull molecules combining a diarylamine donor block with various electron-acceptor units through phenylthienyl (PT) and bithienyl (TT) π-conjugating spacers have been synthesized. Optical and electrochemical results, supported by theoretical calculations, show that the electronic properties of the molecules can be modulated by varying the strength of the acceptor group and/or the structure of the conjugating spacer. As a first evaluation of the potential of these compounds as donors in organic solar cells (OSC), simple planar heterojunction (PHJ) prototypes using fullerene C60 as electron acceptor have been fabricated. Most OSCs exhibit analogous photoconversion efficiencies in the 1.5-2 % range. Their characteristics are discussed in terms of structure-properties relationships.
RESUMEN
An overview of some recent developments of the chemistry of molecular donor materials for organic photovoltaics (OPV) is presented. Although molecular materials have been used for the fabrication of OPV cells from the very beginning of the field, the design of molecular donors specifically designed for OPV is a relatively recent research area. In the past few years, molecular donors have been used in both vacuum-deposited and solution-processed OPV cells and both fields have witnessed impressive progress with power conversion efficiencies crossing the symbolic limit of 10 %. However, this progress has been achieved at the price of an increasing complexity of the chemistry of active materials and of the technology of device fabrication. This evolution probably inherent to the progress of research is difficult to reconcile with the necessity for OPV to demonstrate a decisive economic advantage over existing silicon technology. In this short review various classes of molecular donors are discussed with the aim of defining possible basic molecular structures that can combine structural simplicity, low molecular weight, synthetic accessibility, scalability and that can represent possible starting points for the development of simple and cost-effective OPV materials.
RESUMEN
Synthesis, isolation, and characterization of isomerically pure syn- and anti-anthradiindole (ADI) derivatives are described. The anti- and syn-ADI structures are demonstrated by (13)C NMR spectroscopy and by single-crystal X-ray diffraction. The spectroscopic and electrochemical properties as well as the stability of these newly synthesized π-conjugated systems are evaluated and supported by quantum-chemical calculations.
RESUMEN
The hole transporting medium in solid-state dye-sensitized solar cells can be utilized to harvest sunlight. Herein we demonstrate that a triphenylamine-based dye, used as hole-transporting medium, contributes to the photocurrent in a squaraine-sensitized solid-state dye-sensitized solar cell. Steady-state photoluminescence measurements have been used to distinguish between electron transfer and energy transfer processes leading to energy conversion upon light absorption in the hole-transporting dye.
RESUMEN
Extended star-shaped conjugated systems consisting of dicyanovinyl electron-acceptor units connected to a triphenylamine core by means of thiophene (T), thienylenevinylene (TV), and bithiophene (BT) conjugating spacers have been synthesized. The analysis of the electronic properties of the molecules by UV-vis absorption spectroscopy, cyclic voltammetry, and theoretical calculations shows that the electronic properties of the systems depend on the length and rigidity of the conjugating spacer.
RESUMEN
Extended hybrid conjugated systems based on a trithienylphenylamine core with 1, 2 and 3 peripheral dithiafulvenyl units have been synthesized and studied by cyclic voltammetry and UV-Vis. absorption spectroscopy. Theoretical calculations have also been undergone. The behaviour of these derivatives which depends on the number of dithiafulvene moieties grafted of the central core is cleared up. One polymer, obtained from derivative 3 presents polyelectrochromic properties.
RESUMEN
Fixation of a 5-hexyl-2,2'-bithienyl unit on a conjugated BODIPY donor increases the conversion efficiency of the resulting molecular bulk heterojunction solar cells from 1.30 to 2.20%.
RESUMEN
N-(2-ethylhexyl)dithieno[3,2-b:2',3'-d]pyrrole has been prepared and its dimer and trimer have been synthesized by Stille coupling. The electrochemical and optical properties of these compounds have been investigated by cyclic voltammetry, UV-Vis, and fluorescence emission spectroscopies. The obtained results show that these strongly luminescent compounds can be oxidized into stable cation radical and dication state. The analysis of the chain length dependence of the electronic properties indicates that the predicted bandgap of an ideal polymer chain should be considerably smaller than the experimental results reported until now. This difference is discussed in terms of reactivity of the dithieno[3,2-b:2',3'-d]pyrrole (DTP) unit.
RESUMEN
3D-conjugated systems based on oligothiophene segments grafted on a phosphorus or on a phosphine oxide node have been synthesized. Under Stille coupling conditions, bromide terminated thienyl phosphine derivatives undergo a breaking of the phosphorus-carbon bond attributed to a ligand exchange with the Pd catalyst. The electronic properties of the new compounds have been analyzed by UV-vis and fluorescence spectroscopy and cyclic voltammetry.
RESUMEN
Introduction of electroaccepting groups at the periphery of triphenylamine-based derivatives leads to an internal charge-transfer band. Syntheses and spectroscopic, electrochemical, and theoretical studies of various derivatives which differ by the strength and the number of electroacceptor groups are presented. These various results show that the ICT band and the acceptor/donor abilities of derivatives can be finely tuned.
RESUMEN
Star-shaped molecules based on a triphenylamine core derivatized with various combinations of thienylenevinylene conjugated branches and electron-withdrawing indanedione or dicyanovinyl groups have been synthesized. UV-vis absorption and fluorescence emission data show that the introduction of the electron-acceptor groups induces an intramolecular charge transfer that results in a shift of the absorption onset toward longer wavelengths and a quenching of photoluminescence. Cyclic voltammetry shows that all compounds present a reversible first oxidation process whose potential increases with the number of electron-withdrawing groups in the structure. Prototype bulk and bilayer heterojunction solar cells have been realized using fullerene C60 derivatives as acceptor material. The results obtained with both kinds of devices show that the introduction of electron-acceptor groups in the donor structure induces an extension of the photoresponse in the visible spectral region, an increase of the maximum external quantum efficiency, and an increase of the open-circuit voltage under white light illumination. These synergistic effects allow reaching power conversion efficiencies of approximately 1.20% under simulated AM 1.5 solar irradiation at 100 mW cm(-2).
RESUMEN
Introduction of dicyanovinyl groups on a triphenylamine-based conjugated system leads to an intramolecular charge transfer which extends the spectral response and raises the open-circuit voltage of the resulting hetero-junction solar cells.
RESUMEN
The synthesis of the title compound and its use as a building block in pi-conjugated systems are presented.
RESUMEN
The dimer and trimer of 3,4-phenylenedioxythiophene (PheDOT) have been synthesized. Unlike the parent systems based on 3,4-ethylenedioxythiophene (EDOT), these compounds are quite stable under atmospheric conditions. The electronic absorption spectra of di- and tri-PheDOT exhibit a well-resolved vibronic fine structure indicative of self-rigidification of the conjugated structure by noncovalent intramolecular sulfur-oxygen interactions. Comparison of UV-visible data for the PheDOT oligomers with those of the corresponding EDOT oligomers reveals a faster decrease of the HOMO-LUMO gap with chain length for the former. Cyclic voltammetric data show that whereas PheDOT oxidizes at a lower potential than EDOT, the PheDOT dimer and trimer exhibit much higher oxidation potentials than their EDOT-based analogues. A comparative analysis of the electropolymerization of the three PheDOT-based systems shows that although PheDOT is very difficult to polymerize, its dimer and trimer can be readily electropolymerized. This unexpected increase of reactivity with chain extension is discussed with the aid of theoretical calculations.
RESUMEN
Electropolymerization of the title compound leads to a conjugated polymer with redox potential, band gap, optical transparency in the doped state and stability similar to those of PEDOT.