New findings on the anaerobic co-digestion of thermally pretreated sludge and food waste: laboratory and pilot-scale studies.

Co-digestion of thermally pretreated sewage sludge with food waste is an innovative strategy that could improve the balance and availability of nutrients needed to increase the efficiency of anaerobic digestion in terms of biogas production. In this context, the aim of this research was to evaluate the impact of different proportions of sewage sludge/food waste in laboratory- and pilot-scale reactors. Special focus was placed on the impact of the variability of food waste composition on the behaviour of the pilot digester. Our results show that by adding 40% of co-substrate, a higher biogas production was possible during laboratory operation. Interestingly, using a co-substrate of variable composition had no negative impact on the reactor's stability at pilot-scale, promoting an increase in biogas production through a more efficient use of organic matter. In both the lab and pilot experiences there was an impact on the amount of nitrogen in the digestate compared to digester operating in monodigestion. This impact is more significant as the proportion of co-substrate rises. Overall, our results show that co-digestion of thermally pretreated sewage sludge with food waste allows better management of food waste, especially when their composition is variable.

Exploitation of the ADM1 in a XXI century wastewater resource recovery facility (WRRF): The case of codigestion and thermal hydrolysis.

The aim of this study is to test the capability of the anaerobic digestion model n1 (ADM1) to reproduce data from full-scale digesters operated in a wastewater resource recovery facility (WRRF) where both thermal hydrolysis and codigestion with industrial waste are carried out. Furthermore, the potential uses of the model in a WRRF are also described, with particular relevance for plant engineers/operators. The model capability was calibrated and validated with data from full-scale digesters from the Mapocho-Trebal WRRF (Biofactoría) in Santiago, Chile. A success simulation rate, defined as the percentage of experimental values of a certain variable that lies within the simulation band given by a simulation tolerance established by the user/operator, was established to test the capability of the model as objectively as possible. Regarding the full-scale digester fed with thermally pretreated mixed sludge, success rates of 65% for biogas production and 60-100% for other variables were achieved. Regarding the full-scale digester in codigestion mode, the model had a success rate of approximately 60% for predicting the biogas flow for the whole evaluation period, while for the other variables, values between 70 and 100% were attained. The lowest success rates were observed for the volatile fatty acid (VFA) concentration in the digestate. Despite the lack of available data and the number of assumptions that had to be made, the model was demonstrated to be capable of reproducing the behavior of the full-scale reactors. A proper, up-to-date, calibrated and validated model can aid in the decision-making process in a WRRF, for instance, in determining some unmeasured inlet conditions, in improving the resilience of the process and in managing the incorporation of a new cosubstrate into the plant, among others.

Assessing the stability of anaerobic co-digestion in the context of a WWTP with thermal pre-treatment of sewage sludge. Case study in Chile.

In this study, beverage wastewater (BW) and extended aeration sewage sludge were assessed as co-substrates with both mixed sludge and thermally hydrolyzed sludge as substrates in an anaerobic codigestion (AcoD) process. The methodology is an integrated methodology that comprises a batch test (BMP) and semicontinuous reactor along with microbial diversity analysis. The results showed that in batch conditions, neither significant synergistic nor antagonistic effects were observed on the maximum potential (P) due to the cosubstrates presence. However, synergistic effects on a kinetic parameter (Rm) were observed when BW was used as cosubstrate. Process instability was observed in semi-continuous mode with cosubstrate BW, which was not predicted by the BMP test. As demonstrated in this study, the BMP approach is also not suitable for predicting continuous performance in real systems; however, it can be used to screen an array of substrates. In semi-continuous mode, one can expect to reach values between 50 and 60% of the biogas potential and 20-40% of the maximum production rate achieved in batch tests. The agreement between batch and semi-continuous results is also dependent on the type of inoculum used. The microbial diversity of the system was more influenced by the reactor stability than the presence of cosubstrates. To predict the performance (and stability) of real anaerobic digesters, dynamic models should be employed.

Addressing the synergy determination in anaerobic co-digestion and the inoculum activity impact on BMP test.

Anaerobic mono-digestion and co-digestion are nowadays widely used in wastewater treatment plants (WWTP). However, the data processing of the conventional biochemical potential test (BMP) carried out to assess potential substrates should be enhanced to reduce the uncertainty of the results. In this study, two methodologies aiming to improve the data processing in anaerobic digestion studies were proposed. The methodologies aimed at the estimation of synergy in anaerobic co-digestion of organic waste and the standardization of the BMP test results by considering the activity of the inoculums under mono-digestion conditions. Both methodologies comprise the application of the Gompertz equation. For the first methodology, four cosubstrates and two types of substrates were used. Regarding synergy estimation, the cosubstrates dairy whey and grease sludge had an impact on the degradation kinetic. In regard to the second methodology, the results indicate that the activity of the inoculums exerts an influence on the BMP analysis, and it should be considered. This can be meaningful when comparing results among studies when different inoculums are used or even for studies where the same inoculum is used but it is taken at different reactor operational moments.

Influence of phenylacetic acid pulses on anaerobic digestion performance and archaeal community structure in WWTP sewage sludge digesters.

The effect of phenylacetic acid (PAA) pulses on anaerobic digestion (AD) performance and archaeal community structure was evaluated in anaerobic digesters treating sewage sludge from a wastewater treatment plant (WWTP). Four pilot-scale continuous stirred tank reactors were set up at a full-scale municipal WWTP in Santiago de Chile, and fed with either primary or mixed sewage sludge. AD performance was evaluated by volatile fatty acid (VFA) and biogas production monitoring. Archaeal community structure was characterized by 16S rRNA denaturing gradient gel electrophoresis and band sequencing. In the primary sludge digester, a single PAA pulse at 200 mg L(-1) was sufficient to affect AD performance and archaeal community structure, resulting in long-term VFA accumulation, reduced biogas production and community shift from dominant acetoclastic (Methanosaeta concilii) to hydrogenotrophic (Methanospirillum hungatei) methanogens. By contrast, AD performance and archaeal community structure in the mixed sludge digester were stable and resistant to repeated PAA pulses at 200 and 600 mg L(-1). This work demonstrated that the effect of PAA pulses on methanogenic activity and archaeal community structure differed according to AD substrate, and suggests that better insights of the correlations between archaeal population dynamics and functional performance could help to better face toxic shocks in AD.

Alternativas de tratamiento y disposicion de los barros de las plantas depuradoras

El tratamiento de las aguas residuales genera la produccion de lodos de los cuales la disposicion final constituye la base de la fiabilidad de la planta depuradora. El articulo enumera distintas caracteristicas de los lodos a tener en cuenta para optimizar las etapas de su tratamiento, como su dilucion, fermenticibilidad, y la presencia de elementos quimicos y biologicos indeseables

Compostaje, del rhizocompostaje a la planta centralizada: una tecnica adaptada a varios contextos

Para las plantas depuradoras de baja capacidad, sobre las cuales los procesos tradicionales de tratamiento de lodos son demasiado costosos en inversion y explotacion, fue desarrollado el proceso Rhizocompostaje. En este, los barros en exceso extraidos directamento del tanque de aireacion, son esparcidos sobre la superficie del lecho de arena plantado con cañas, segun ciclos con alternancia de periodos de descanso y periodos de alimentacion. El compostaje tiene varios efectos sobre los barros tratados y el producto final presenta caracteristicas reconocidas en la agricultura

Tratamiento de depuración de aguas cloacales

Se explican las tres líneas de tratamiento para la depuración de las aguas residuales que son: agua, fango y aire

Tratamiento de depuración de aguas cloacales

Se explican las tres líneas de tratamiento para la depuración de las aguas residuales que son: agua, fango y aire