Summary recommendations on "Analytical methods for substances in the Watch List under the Water Framework Directive".

The Watch List (WL) is a monitoring program under the European Water Framework Directive (WFD) to obtain high-quality Union-wide monitoring data on potential water pollutants for which scarce monitoring data or data of insufficient quality are available. The main purpose of the WL data collection is to determine if the substances pose a risk to the aquatic environment at EU level and subsequently to decide whether a threshold, the Environmental Quality Standards (EQS) should be set for them and, potentially to be listed as priority substance in the WFD. The first WL was established in 2015 and contained 10 individual or groups of substances while the 4th WL was launched in 2022. The results of monitoring the substances of the first WL showed that some countries had difficulties to reach an analytical Limit of Quantification (LOQ) below or equal to the Predicted No-Effect Concentrations (PNEC) or EQS. The Joint Research Centre (JRC) of the European Commission (EC) organised a series of workshops to support the EU Member States (MS) and their activities under the WFD. Sharing the knowledge among the Member States on the analytical methods is important to deliver good data quality. The outcome and the discussion engaged with the experts are described in this paper, and in addition a literature review of the most important publications on the analysis of 17-alpha-ethinylestradiol (EE2), amoxicillin, ciprofloxacin, metaflumizone, fipronil, metformin, and guanylurea from the last years is presented.

Study of antibiotic resistance in freshwater ecosystems with low anthropogenic impact.

This study aimed to investigate the bacterial diversity and the background level of antibiotic resistance in two freshwater ecosystems with low anthropogenic impact in order to evaluate the presence of natural antimicrobial resistance in these areas and its potential to spread downstream. Water samples from a pre-Alpine and an Apennine river (Variola and Tiber, respectively) were collected in three different sampling campaigns and bacterial diversity was assessed by 16S sequencing, while the presence of bacteria resistant to five antibiotics was screened using a culturable approach. Overall bacterial load was higher in the Tiber River compared with the Variola River. Furthermore, the study revealed the presence of resistant bacteria, especially the Tiber River showed, for each sampling, the presence of resistance to all antibiotics tested, while for the Variola River, the detected resistance was variable, comprising two or more antibiotics. Screening of two resistance genes on a total of one hundred eighteen bacterial isolates from the two rivers showed that blaTEM, conferring resistance to ß-lactam antibiotics, was dominant and present in ~58 % of isolates compared to only ~9 % for mefA/E conferring resistance to macrolides. Moreover, ß-lactam resistance was detected in various isolates showing also resistance to additional antibiotics such as macrolides, aminoglycosides and tetracyclines. These observations would suggest the presence of co-resistant bacteria even in non-anthropogenic environments and this resistance may spread from the environment to humans and/or animals.

Valorize to Protect Lucanian Sheep and Goat Biodiversity.

European agriculture and rural development policies have promoted the diversity and genetic types of autochthonous breeds to increase sheep and goat biodiversity. Agri-environmental measures to support livestock farmers, have been the main tools used by these policies over the last twenty years. The COLAUTOC, "Collection of a seed bank for native sheep and goat breeds and strategies to increase their numbers", research project in Basilicata, Southern Italy, investigated sheep and goat farms with autochthonous breeds with results proving a reduction in the number of sheep and goat farms in general, particularly those with native breeds at risk of extinction, a clear indication of policy failure with a devastating loss of sheep and goat biodiversity. The COLAUTOC used a variety of methodological tools, including, desk analysis, focus groups, interviews, school workshops and a survey on sheep and goat meat consumption. The results indicated that a recovery in sheep and goat biodiversity could be achieved by supporting farm livestock strategies with a view to diversify production methods and activities, whilst, recognizing the value added to the territory, landscape, biodiversity and sustainability. The strategies identified by the COLAUTOC project require a local vision, using agri-environmental funds to invest in training on innovation for farms, provide tools to improve the quality of life in the rural areas, to increase communication channels to further knowledge and awareness of biodiversity. These strategies could contribute to meeting several 2030 Agenda goals.

Holistic approach to chemical and microbiological quality of aquatic ecosystems impacted by wastewater effluent discharges.

Wastewater treatment plants (WWTPs) collect wastewater from various sources and use different treatment processes to reduce the load of pollutants in the environment. Since the removal of many chemical pollutants and bacteria by WWTPs is incomplete, they constitute a potential source of contaminants. The continuous release of contaminants through WWTP effluents can compromise the health of the aquatic ecosystems, even if they occur at very low concentrations. The main objective of this work was to characterize, over a period of four months, the treatment steps starting from income to the effluent and 5 km downstream to the receiving river. In this context, the efficiency removal of chemical pollutants (e.g. hormones and pharmaceuticals, including antibiotics) and bacteria was assessed in a WWTP case study by using a holistic approach. It embraces different chemical and biological-based methods, such as pharmaceutical analysis by HPLC-MSMS, growth rate inhibition in algae, ligand binding estrogen receptor assay, microbial community study by 16S and shotgun sequencing along with relative quantification of resistance genes by quantitative polymerase chain reaction. Although both, chemical and biological-based methods showed a significant reduction of the pollutant burden in effluent and surface waters compared to the influent of the WWTP, no complete removal of pollutants, pathogens and antibiotic resistance genes was observed.

Metagenomics Analysis to Investigate the Microbial Communities and Their Functional Profile During Cyanobacterial Blooms in Lake Varese.

Toxic cyanobacterial blooms represent a natural phenomenon caused by a mass proliferation of photosynthetic prokaryotic microorganisms in water environments. Bloom events have been increasingly reported worldwide and their occurrence can pose serious threats to aquatic organisms and human health. In this study, we assessed the microbial composition, with a focus on Cyanobacteria, in Lake Varese, a eutrophic lake located in northern Italy. Water samples were collected and used for obtaining a 16S-based taxonomic profile and performing a shotgun sequencing analysis. The phyla found to exhibit the greatest relative abundance in the lake included Proteobacteria, Cyanobacteria, Actinobacteriota and Bacteroidota. In the epilimnion and at 2.5 × Secchi depth, Cyanobacteria were found to be more abundant compared to the low levels detected at greater depths. The blooms appear to be dominated mainly by the species Lyngbya robusta, and a specific functional profile was identified, suggesting that distinct metabolic processes characterized the bacterial population along the water column. Finally, analysis of the shotgun data also indicated the presence of a large and diverse phage population.

Impact of Viral Decontamination Method on Cytokine Profile of COVID-19 Patients.

COVID-19 related morbidity and mortality have been often attributed to an exaggerated immune response. The role of cytokines and chemokines in COVID-19 and their contributions to illness severity are known, and thus their profiling from patient bronchoalveolar lavage (BAL) samples would help in understanding the disease progression. To date, limited studies have been performed on COVID-19 BAL samples, as the manipulation of such specimens (potentially containing live viruses) requires several laboratorial precautions, such as personnel training and special equipment, a requirement that not all laboratories can fulfil. Here, we assessed two fast and easily applicable methods (ultrafiltration and ultraviolet-C irradiation) for their impact on viral load removal or inactivation, respectively and on cytokine profiles preservation. Eight samples of BAL fluids from SARS-CoV2 patients with high viral load were tested. For both methods, complete removal was confirmed by lack of viral replication in Vero E6 cells and by RT-qPCR. Although both methods showed to remove completely the active SARS-CoV2 viral load, only UVC treatment has little or no quantitative effect on total cytokines/chemokines measurements, however cytokines profile and relative ratios are preserved or minimally altered when compared data obtained by the two different decontamination methods. Sample preparation and manipulation can greatly affect the analytical results; therefore, understanding if changes occurred after sample processing is of outmost importance for reliable data and can be useful to improve clinical practice.

Knowledge gaps in the assessment of antimicrobial resistance in surface waters.

The spread of antibiotic resistance in the water environment has been widely described. However, still many knowledge gaps exist regarding the selection pressure from antibiotics, heavy metals and other substances present in surface waters as a result of anthropogenic activities, as well as the extent and impact of this phenomenon on aquatic organisms and humans. In particular, the relationship between environmental concentrations of antibiotics and the acquisition of ARGs by antibiotic-sensitive bacteria as well as the impact of heavy metals and other selective agents on antimicrobial resistance (AMR) need to be defined. Currently, established safety values are based on the effects of antibiotic toxicity neglecting the question of AMR spread. In turn, risk assessment of antibiotics in waterbodies remains a complex question implicating multiple variables and unknowns reinforced by the lack of harmonized protocols and official guidelines. In the present review, we discussed current state-of-the-art and the knowledge gaps related to pressure exerted by antibiotics and heavy metals on aquatic environments and their relationship to the spread of AMR. Along with this latter, we reflected on (i) the risk assessment in surface waters, (ii) selective pressures contributing to its transfer and propagation and (iii) the advantages of metagenomics in investigating AMR. Furthermore, the role of microplastics in co-selection for metal and antibiotic resistance, together with the need for more studies in freshwater are highlighted.

SARS-CoV-2 detection in wastewater using multiplex quantitative PCR.

A multiplex reverse transcription quantitative PCR (RT-qPCR)-based method was designed for the simultaneous detection of different SARS-CoV-2 genes. In this study, we used three target genes encoding for the nucleocapsid 1 and 3 (N1, N3), and the spike (S) proteins, all commonly used in the detection of SARS-CoV-2 in human and environmental samples. The performance of the multiplex assay, compared to the single assay was assessed for the standard calibration curve, required for absolute quantification, and then, for the real environmental samples to detect SARS-CoV-2. For this latter, four environmental samples were collected at a local wastewater treatment plant (WWTP). The results showed that the cycle threshold (Ct) values of the multiplex were comparable to the values obtained by the singleplex PCR. The amplification of the three target genes indicated the presence of SARS-CoV-2 in the four water samples with an increasing trend in February and these results were confirmed in the multiplex approach, showing the robustness of this method and its applicability for the relative abundance analysis among the samples. Overall, both the laboratory and field work results demonstrated that the multiplex PCR assay developed in this study could provide a method for SARS-CoV-2 detection as robust as the single qPCR, but faster and cost-effective, reducing by three times the number of reactions, and consequently the handling time and reagents.

New Detection Platform for Screening Bacteria in Liquid Samples.

The development of sensitive methods for the determination of potential bacterial contamination is of upmost importance for environmental monitoring and food safety. In this study, we present a new method combining a fast pre-enrichment step using a microporous cryogel and a detection and identification step using antimicrobial peptides (AMPs) and labelled antibodies, respectively. The experimental method consists of: (i) the capture of large amounts of bacteria from liquid samples by using a highly porous and functionalized cryogel; (ii) the detection and categorisation of Gram-positive and Gram-negative bacteria by determining their affinities toward a small set of AMPs; and (iii) the identification of the bacterial strain by using labelled detection antibodies. As proof of concept, the assessment of the three steps of the analysis was performed by using Escherichia coli and Bacillus sp. as models for Gram-negative and Gram-positive bacteria, respectively. The use of AMPs with broad specificity combined with labelled antibodies enabled the detection and potential categorization of a large spectrum of unknown or unexpected bacteria.

Estrogenicity of chemical mixtures revealed by a panel of bioassays.

Estrogenic compounds are widely released to surface waters and may cause adverse effects to sensitive aquatic species. Three hormones, estrone, 17ß-estradiol and 17α-ethinylestradiol, are of particular concern as they are bioactive at very low concentrations. Current analytical methods are not all sensitive enough for monitoring these substances in water and do not cover mixture effects. Bioassays could complement chemical analysis since they detect the overall effect of complex mixtures. Here, four chemical mixtures and two hormone mixtures were prepared and tested as reference materials together with two environmental water samples by eight laboratories employing nine in vitro and in vivo bioassays covering different steps involved in the estrogenic response. The reference materials included priority substances under the European Water Framework Directive, hormones and other emerging pollutants. Each substance in the mixture was present at its proposed safety limit concentration (EQS) in the European legislation. The in vitro bioassays detected the estrogenic effect of chemical mixtures even when 17ß-estradiol was not present but differences in responsiveness were observed. LiBERA was the most responsive, followed by LYES. The additive effect of the hormones was captured by ERα-CALUX, MELN, LYES and LiBERA. Particularly, all in vitro bioassays detected the estrogenic effects in environmental water samples (EEQ values in the range of 0.75-304 × EQS), although the concentrations of hormones were below the limit of quantification in analytical measurements. The present study confirms the applicability of reference materials for estrogenic effects' detection through bioassays and indicates possible methodological drawbacks of some of them that may lead to false negative/positive outcomes. The observed difference in responsiveness among bioassays - based on mixture composition - is probably due to biological differences between them, suggesting that panels of bioassays with different characteristics should be applied according to specific environmental pollution conditions.

Dark Field Microscopy-Based Biosensors for the Detection of E. coli in Environmental Water Samples.

Development of sensitive methods for the determination of E. coli bacteria contamination in water distribution systems is of paramount importance to ensure the microbial safety of drinking water. This work presents a new sensing platform enabling the fast detection of bacteria in field samples by using specific antibodies as the biorecognition element and dark field microscopy as the detection technique. The development of the sensing platform was performed using non-pathogenic bacteria, with the E. coli DH5α strain as the target, and Bacillus sp. 9727 as the negative control. The identification of the captured bacteria was made by analyzing the dark field microscopy images and screening the detected objects by using object circularity and size parameters. Specificity tests revealed the low unspecific attachment of either E. coli over human serum albumin antibodies (negative control for antibody specificity) and of Bacillus sp. over E. coli antibodies. The system performance was tested using field samples, collected from a wastewater treatment plant, and compared with two quantification techniques (i.e., Colilert-18 test and quantitative polymerase chain reaction (qPCR)). The results showed comparable quantification capability. Nevertheless, the present method has the advantage of being faster, is easily adaptable to in-field analysis, and can potentially be extended to the detection of other bacterial strains.

Chemical mixtures and fluorescence in situ hybridization analysis of natural microbial community in the Tiber river.

The Water Framework Directive (WFD) regulates freshwater and coastal water quality assessment in Europe. Chemical and ecological water quality status is based on measurements of chemical pollutants in water and biota together with other indicators such as temperature, nutrients, species compositions (phytoplankton, microalgae, benthos and fish) and hydromorphological conditions. However, in the current strategy a link between the chemical and the ecological status is missing. In the present WFD, no microbiological indicators are foreseen for integrating the different anthropogenic pressures, including mixtures of chemicals, nutrients and temperature changes, to provide a holistic view of the freshwater ecosystem water quality. The main aim of this work was to evaluate if natural microbial populations can be valuable indicators of multiple stressors (e.g. chemical pollutants, temperature, nutrients etc.) to guide preventive and remediation actions by water authorities. A preliminary survey was conducted to identify four sites reflecting a contamination gradient from the source to the mouth of a river suitable to the objectives of the European Marie Curie project, MicroCoKit. The River Tiber (Italy) was selected as a pilot case study to investigate the correlation between bacteria taxa and the chemical status of the river. The main physicochemical parameters, inorganic elements, organic pollutants and natural microbial community composition were assessed at four selected sites corresponding to pristine, agricultural, industrial and urban areas for three consecutive years. The overall chemical results indicated a correspondence between different groups of contaminants and the main contamination sources at the selected sampling points. Phylogenetic analysis of the microbial community analyzed by Fluorescence In Situ Hybridization method (FISH) revealed differences among the four sampling sites which could reflect an adaptive bacterial response to the different anthropogenic pressures.

Current EU research activities on combined exposure to multiple chemicals.

Humans and wildlife are exposed to an intractably large number of different combinations of chemicals via food, water, air, consumer products, and other media and sources. This raises concerns about their impact on public and environmental health. The risk assessment of chemicals for regulatory purposes mainly relies on the assessment of individual chemicals. If exposure to multiple chemicals is considered in a legislative framework, it is usually limited to chemicals falling within this framework and co-exposure to chemicals that are covered by a different regulatory framework is often neglected. Methodologies and guidance for assessing risks from combined exposure to multiple chemicals have been developed for different regulatory sectors, however, a harmonised, consistent approach for performing mixture risk assessments and management across different regulatory sectors is lacking. At the time of this publication, several EU research projects are running, funded by the current European Research and Innovation Programme Horizon 2020 or the Seventh Framework Programme. They aim at addressing knowledge gaps and developing methodologies to better assess chemical mixtures, by generating and making available internal and external exposure data, developing models for exposure assessment, developing tools for in silico and in vitro effect assessment to be applied in a tiered framework and for grouping of chemicals, as well as developing joint epidemiological-toxicological approaches for mixture risk assessment and for prioritising mixtures of concern. The projects EDC-MixRisk, EuroMix, EUToxRisk, HBM4EU and SOLUTIONS have started an exchange between the consortia, European Commission Services and EU Agencies, in order to identify where new methodologies have become available and where remaining gaps need to be further addressed. This paper maps how the different projects contribute to the data needs and assessment methodologies and identifies remaining challenges to be further addressed for the assessment of chemical mixtures.

Label-Free Biosensor Detection of Endocrine Disrupting Compounds Using Engineered Estrogen Receptors.

Endocrine Disrupting Compounds (EDCs) are chemical substances shown to interfere with endogenous hormones affecting the endocrine, immune and nervous systems of mammals. EDCs are the causative agents of diseases including reproductive disorders and cancers. This highlights the urgency to develop fast and sensitive methods to detect EDCs, which are detrimental even at very low concentrations. In this work, we propose a label-free surface plasmon resonance (SPR) biosensor method to detect specific EDCs (17 ß-estradiol (E2), ethinyl-estradiol, 4-nonylphenol, tamoxifen) through their binding to estrogen receptor alpha (ERα). We show that the use of rationally designed ERα (as bio-recognition element) in combination with conformation-sensitive peptides (as amplification agent, resulting in increased responses) enables the detection of low parts per billion (ppb) levels of E2. As a proof of concept, this bioassay was used to detect E2 in (spiked) real water samples from fish farms, rivers and the sea at low ppb levels after concentration by solid phase extraction. In addition, the present SPR assay that combines a conformation-sensitive peptide with an array of ERα mutants is very promising for the assessment of the risk of potential estrogenic activity for chemical substances.

Screening of benzodiazepines in thirty European rivers.

Pharmaceuticals as environmental contaminants have received a lot of interest over the past decade but, for several pharmaceuticals, relatively little is known about their occurrence in European surface waters. Benzodiazepines, a class of pharmaceuticals with anxiolytic properties, have received interest due to their behavioral modifying effect on exposed biota. In this study, our results show the presence of one or more benzodiazepine(s) in 86% of the analyzed surface water samples (n = 138) from 30 rivers, representing seven larger European catchments. Of the 13 benzodiazepines included in the study, we detected 9, which together showed median and mean concentrations (of the results above limit of quantification) of 5.4 and 9.6 ng L-1, respectively. Four benzodiazepines (oxazepam, temazepam, clobazam, and bromazepam) were the most commonly detected. In particular, oxazepam had the highest frequency of detection (85%) and a maximum concentration of 61 ng L-1. Temazepam and clobazam were found in 26% (maximum concentration of 39 ng L-1) and 14% (maximum concentration of 11 ng L-1) of the samples analyzed, respectively. Finally, bromazepam was found only in Germany and in 16 out of total 138 samples (12%), with a maximum concentration of 320 ng L-1. This study clearly shows that benzodiazepines are common micro-contaminants of the largest European river systems at ng L-1 levels. Although these concentrations are more than a magnitude lower than those reported to have effective effects on exposed biota, environmental effects cannot be excluded considering the possibility of additive and sub-lethal effects.

Rationally modified estrogen receptor protein as a bio-recognition element for the detection of EDC pollutants: strategies and opportunities.

The estrogen receptor protein (ER) can bind a vast number of organic pollutants widely spread in the environment and collectively known as Endocrine Disrupting Chemicals, EDCs. Its broad selectivity makes it an ideal bio-recognition element for the detection of EDCs. Here we describe the strategy and rationale for the design of ER based biosensors and assays that generate a signal in the presence of EDCs. The opportunity to use either natural or rationally modified ER molecules is discussed. The latter approach was successfully applied in the EU-FP7 project RADAR, with the aim to develop a novel biosensor for the detection of organic pollutants both in the environment and in commercial water products.

Adverse outcome pathway (AOP) development I: strategies and principles.

An adverse outcome pathway (AOP) is a conceptual framework that organizes existing knowledge concerning biologically plausible, and empirically supported, links between molecular-level perturbation of a biological system and an adverse outcome at a level of biological organization of regulatory relevance. Systematic organization of information into AOP frameworks has potential to improve regulatory decision-making through greater integration and more meaningful use of mechanistic data. However, for the scientific community to collectively develop a useful AOP knowledgebase that encompasses toxicological contexts of concern to human health and ecological risk assessment, it is critical that AOPs be developed in accordance with a consistent set of core principles. Based on the experiences and scientific discourse among a group of AOP practitioners, we propose a set of five fundamental principles that guide AOP development: (1) AOPs are not chemical specific; (2) AOPs are modular and composed of reusable components-notably key events (KEs) and key event relationships (KERs); (3) an individual AOP, composed of a single sequence of KEs and KERs, is a pragmatic unit of AOP development and evaluation; (4) networks composed of multiple AOPs that share common KEs and KERs are likely to be the functional unit of prediction for most real-world scenarios; and (5) AOPs are living documents that will evolve over time as new knowledge is generated. The goal of the present article was to introduce some strategies for AOP development and detail the rationale behind these 5 key principles. Consideration of these principles addresses many of the current uncertainties regarding the AOP framework and its application and is intended to foster greater consistency in AOP development.

Adverse outcome pathway development II: best practices.

Organization of existing and emerging toxicological knowledge into adverse outcome pathway (AOP) descriptions can facilitate greater application of mechanistic data, including those derived through high-throughput in vitro, high content omics and imaging, and biomarker approaches, in risk-based decision making. The previously ad hoc process of AOP development is being formalized through development of internationally harmonized guidance and principles. The goal of this article was to outline the information content desired for formal AOP description and some rules of thumb and best practices intended to facilitate reuse and connectivity of elements of an AOP description in a knowledgebase and network context. For example, key events (KEs) are measurements of change in biological state that are indicative of progression of a perturbation toward a specified adverse outcome. Best practices for KE description suggest that each KE should be defined as an independent measurement made at a particular level of biological organization. The concept of "functional equivalence" can help guide both decisions about how many KEs to include in an AOP and the specificity with which they are defined. Likewise, in describing both KEs and evidence that supports a causal linkage or statistical association between them (ie, a key event relationship; KER), best practice is to build from and contribute to existing KE or KER descriptions in the AOP knowledgebase rather than creating redundant descriptions. The best practices proposed address many of the challenges and uncertainties related to AOP development and help promote a consistent and reliable, yet flexible approach.

Rational modification of estrogen receptor by combination of computational and experimental analysis.

In this manuscript, we modulate the binding properties of estrogen receptor protein by rationally modifying the amino acid composition of its ligand binding domain. By combining sequence alignment and structural analysis of known estrogen receptor-ligand complexes with computational analysis, we were able to predict estrogen receptor mutants with altered binding properties. These predictions were experimentally confirmed by producing single point variants with up to an order of magnitude increased binding affinity towards some estrogen disrupting chemicals and reaching an half maximal inhibitory concentration (IC50) value of 2 nM for the 17α-ethinylestradiol ligand. Due to increased affinity and stability, utilizing such mutated estrogen receptor instead of the wild type as bio-recognition element would be beneficial in an assay or biosensor.

Mixtures of chemical pollutants at European legislation safety concentrations: how safe are they?

The risk posed by complex chemical mixtures in the environment to wildlife and humans is increasingly debated, but has been rarely tested under environmentally relevant scenarios. To address this issue, two mixtures of 14 or 19 substances of concern (pesticides, pharmaceuticals, heavy metals, polyaromatic hydrocarbons, a surfactant, and a plasticizer), each present at its safety limit concentration imposed by the European legislation, were prepared and tested for their toxic effects. The effects of the mixtures were assessed in 35 bioassays, based on 11 organisms representing different trophic levels. A consortium of 16 laboratories was involved in performing the bioassays. The mixtures elicited quantifiable toxic effects on some of the test systems employed, including i) changes in marine microbial composition, ii) microalgae toxicity, iii) immobilization in the crustacean Daphnia magna, iv) fish embryo toxicity, v) impaired frog embryo development, and vi) increased expression on oxidative stress-linked reporter genes. Estrogenic activity close to regulatory safety limit concentrations was uncovered by receptor-binding assays. The results highlight the need of precautionary actions on the assessment of chemical mixtures even in cases where individual toxicants are present at seemingly harmless concentrations.