Determination of the ideal plate for medial femoral condyle fracture fixation: an anatomical fit and biomechanical study.

BACKGROUND: The aim of this study is to determine the best plate to use as a substitute to fix a medial femoral condyle fracture. MATERIALS AND METHODS: The first part is to measure the best fit between several anatomical plates including the Proximal Tibia Anterolateral Plate (PT AL LCP), the Proximal Tibia Medial Plate (PT M LCP), the Distal Tibia Medial Locking Plate (DT M LCP) and the Proximal Humerus (PHILOS) plate against 28 freshly embalmed cadaveric distal femurs. Measurements such as plate offset and number of screws in the condyle and shaft shall be obtained. The subsequent part is to determine the compressive force at which the plate fails. After creating an iatrogenic medial condyle fracture, the cadavers will be fixed with the two plates with the best anatomical fit and subjected to a compression force using a hydraulic press. RESULTS: The PT AL LCP offered the best anatomical fit whereas the PHILOS plate offered the maximal number of screws inserted. The force required to create 2 mm of fracture displacement between the two is not statistically significant (LCP 889 N, PHILOS 947 N, p = 0.39). The PT AL LCP can withstand a larger fracture displacement than the PHILOS (LCP 24.4 mm, PHILOS 17.4 mm, p = 0.004). DISCUSSION AND CONCLUSION: Both the PT AL LCP and the PHILOS remain good options in fixing a medial femoral condyle fracture. Between the two, we would recommend the PT AL LCP as the slightly superior option.

Should nails be locked dynamically or statically in atypical femoral fractures? - A radiological analysis of time to union and reoperations in 236 displaced fractures with 4 years average follow-up.

INTRODUCTION: Atypical femoral fractures (AFFs) are associated with delayed union and higher reoperation rates. Axial dynamization of intramedullary nails is hypothesized to reduce time-to-union (TTU) and fixation failure as compared to static locking. METHODS: Consecutive acutely displaced AFFs fixed with long intramedullary nails across five centres between 2006 and 2021 with a minimum postoperative follow-up of three months were retrospectively reviewed. The primary outcome was TTU, compared between AFFs treated with dynamically or statically locked intramedullary nails. Fracture union was defined as a modified Radiographic Union Score for Tibial fractures score of 13 or greater. Secondary outcomes involved revision surgery and treatment failure, defined as non-union beyond 18 months or revision internal fixation for mechanical reasons. RESULTS: A total of 236 AFFs (127 dynamically locked and 109 statically locked) were analysed with good interobserver reliability of fracture union assessment (intraclass correlation coefficient = 0.89; 95% CI = 0.82-0.98). AFFs treated with dynamized nails had significantly shorter median TTU (10.1 months; 95% CI = 9.24-10.96 vs 13.0 months; 95% CI = 10.60-15.40) (log-rank test, p = 0.019). Multivariate Cox regression revealed that dynamic locking was independently associated with greater likelihood of fracture union within 24 months (p = 0.009). Reoperations were less frequent in the dynamic locking group (18.9% vs 28.4%), although the difference was not statistically significant (p = 0.084). Static locking was an independent risk factor for reoperation (p = 0.049), as were varus reduction and lack of teriparatide use within three months of surgery. Static locking also demonstrated a higher frequency of treatment failure (39.4% vs 22.8%, p = 0.006) and was an independent predictor of treatment failure in logistic regression (p = 0.018). Other factors associated with treatment failure included varus reduction and open reduction. CONCLUSIONS: Dynamic locking of intramedullary nails in AFFs is associated with faster time to union, lower rate of non-union, and fewer treatment failures.

Prospective randomized multicenter noninferiority clinical trial evaluating the use of TFN-advancedTM proximal femoral nailing system (TFNA) for the treatment of proximal femur fracture in a Chinese population.

PURPOSE: To evaluate whether the 24-weeks postoperative fracture union rate for the investigational TFNA intramedullary nail was non-inferior compared to the control product PFNA-II. METHODS: The study was a prospective, randomized, single-blind, noninferiority dual-arm study drawing from 9 trauma centers across China, between November 2018 and September 2020, with follow-up measurements at 24 weeks after internal fixation. The full analysis data set (FAS [Intent-to-Treat]) was analyzed and is summarized here. The primary outcome was fracture union rate, a composite score combining clinical and radiographic assessment. Secondary endpoints comprised (a) clinical outcomes including (1) SF-12, (2) Harris Hip, and (3) EQ-5D Scores, (b) radiographic incidence of complications such as loosening or cut-out requiring revision, (c) revision rates, (d) reoperation rates, and (e) adverse events, including 24-weeks revision and reoperation rates. RESULTS: Both TFNA and PFNA-II group fracture healing rates were 100% at 24 weeks; TFNA was therefore shown to be non-inferior to PFNA-II. With baseline data matched in all parameters except age in both the TFNA and PFNA-II groups, comparisons of union rates, SF-12, Harris Hip, and EQ-5D Scores yielded p values > 0.05 indicating no significant difference between the two groups, further supporting the noninferiority of TFNA. In both groups, revision and re-operation rates were 0, and the incidences of serious adverse events were 19.4% and 17.4%, respectively. CONCLUSION: In terms of fracture union rate at 24 weeks, the DePuy Synthes Trochanteric Fixation Nail Advanced (TFNA) was not inferior to the marketed Proximal Femoral Nail Antirotation (PFNA-II) device produced by the same manufacturer. Secondary and safety outcomes showed no significant differences between the two groups. REGISTRATION: Registration was completed at ClinicalTrials.gov NCT03635320.

Surgeon-designed patient-specific instrumentation improves glenoid component screw placement for reverse total shoulder arthroplasty in a population with small glenoid dimensions.

PURPOSE: Glenoid component loosening is a potential complication of reverse total shoulder arthroplasty (rTSA), occurring in part due to lack of adequate screw purchase in quality scapular bone stock. This study was to determine the efficacy of a surgeon-designed, 3D-printed patient-specific instrumentation (PSI) compared to conventional instrumentation (CI) in achieving longer superior and inferior screw lengths for glenoid component fixation. METHODS: A multi-centre retrospective analysis of patients who underwent rTSA between 2015 and 2020. Lengths of the superior and inferior locking screws inserted for fixation of the glenoid baseplate component were recorded and compared according to whether patients received PSI or CI. Secondary outcomes included operative duration and incidence of complications requiring revision surgery. RESULTS: Seventy-three patients (31 PSI vs. 42 CI) were analysed. Average glenoid diameter was 24.5 mm (SD: 3.1) and 81% of patients had smaller glenoid dimensions compared to the baseplate itself. PSI produced significantly longer superior (44.7 vs. 30.7 mm; P < 0.001) and inferior (43.0 vs. 31 mm; P < 0.001) mean screw lengths, as compared to CI. A greater proportion of maximal screw lengths for the given rTSA construct (48 mm) were observed in the PSI group (71.9% vs. 11.9% superior, 59.4% vs. 11.9% inferior). Operative duration was not statistically significantly different between the PSI and CI groups (150 min vs. 169 min, respectively; P = 0.229). No patients had radiographic loosening of the glenoid component with an average of 2-year follow-up. CONCLUSION: PSI facilitates longer superior and inferior screw placement in the fixation of the glenoid component for rTSA. With sufficient training, PSI can be designed and implemented by surgeons themselves.

Can a Wireless Full-HD Head Mounted Display System Improve Knee Arthroscopy Performance? - A Randomized Study Using a Knee Simulator.

INTRODUCTION: Our prototype wireless full-HD Augmented Reality Head-Mounted Display (AR-HMD) aims to eliminate surgeon head turning and reduce theater clutter. Learning and performance versus TV Monitors (TVM) is evaluated in simulated knee arthroscopy. METHODS: 19 surgeons and 19 novices were randomized into either the control group (A) or intervention group (B) and tasked to perform 5 simulated loose-body retrieval procedures on a bench-top knee arthroscopy simulator. A cross-over study design was adopted whereby subjects alternated between devices during trials 1-3, deemed the "Unfamiliar" phase, and then used the same device consecutively in trials 4-5, to assess performance in a more "Familiarized" state. Measured outcomes were time-to-completion and incidence of bead drops. RESULTS: In the unfamiliar phase, HMD had 67% longer mean time-to-completion than TVM (194.7 ± 152.6s vs 116.7 ± 78.7s, P < .001). Once familiarized, HMD remained inferior to TVM, with 48% longer completion times (133.8 ± 123.3s vs 90.6 ± 55s, P = .052). Cox regression revealed device type (OR = 0.526, CI 0.391-0.709, P < .001) and number of procedure repetitions (OR = 1.186, CI 1.072-1.311, P = .001) are significantly and independently related to faster time-to-completion. However, experience is not a significant factor (OR = 1.301, CI 0.971-1.741, P = .078). Bead drops were similar between the groups in both unfamiliar (HMD: 27 vs TVM: 22, P = .65) and familiarized phases (HMD: 11 vs TVM: 17, P = .97). CONCLUSION: Arthroscopic procedures continue to be better performed under conventional TVM. However, similar quality levels can be reached by HMD when given more time. Given the theoretical advantages, further research into improving HMD designs is advocated.

Biomechanical investigation of S2 alar-iliac screw and S1 pedicle screw fixation in the treatment of Denis type II sacral fractures.

Although S2 alar-iliac screw technique has been widely used in spinal surgery, its applicability to pelvic fractures is largely unknown. This study aimed to evaluate the biomechanical stability of S2 alar-iliac screw and S1 pedicle screw fixation in the treatment of Denis II sacral fractures. Twenty-eight artificial pelvic fracture models were treated with unilateral lumbopelvic fixation, sacroiliac screw fixation, S2 alar-iliac screw and S1 pedicle screw fixation, and S2 alar-iliac screw and contralateral S1 pedicle screw fixation (Groups 1-4, respectively; N = 7 per group). Each model was cyclically tested under increasing axial compression. Optical motion-tracking was used to assess relative displacement and gap angle, and the number of failure cycles. Relative displacement was significantly smaller in Group 3 than in Groups 1 (p = 0.004) and 4 (p < 0.001) but not significantly different between Groups 3 and 2 (p = 0.290). The gap angle in Group 3 was significantly smaller than that in Group 1 (p = 0.009) on the sagittal plane but significantly larger than that in Group 4 (p = 0.006) on the horizontal plane. A number of failure cycles was significantly higher in Group 3 than in Groups 1 (p = 0.002) and 4 (p = 0.004) but not significantly different between Groups 3 and 2 (p = 0.910). From a biomechanical perspective, S2 alar-iliac screw and S1 pedicle screw fixation can provide good stability in the treatment of Denis II sacral fractures.

Clinical outcomes and affecting factors of ipsilateral femoral neck and shaft fractures - Multination, multicenter analysis.

BACKGROUND: This study aimed to evaluate the clinical outcomes of ipsilateral femoral neck and shaft fractures and identify the risk factors associated with missed diagnosis of femoral neck fractures and clinical outcomes of this fracture. METHODS: The ipsilateral femoral neck and shaft fractures from seven centers were retrospectively reviewed. Data on injury mechanism, fracture pattern, and fracture classification; surgical factors including fixation method; and timing of detection of femoral neck fracture were analyzed. The clinical outcomes, complications, and the incidence of avascular necrosis of the femoral head (AVNFH) were reviewed. Risk factors for missed femoral neck fracture and complications were analyzed. RESULTS: In total, 74 patients with an average age of 43.6 years were included. Of the femoral shaft fractures, 56.8% were type A, 21.6% were type B, and 21.6% were type C. Sixteen patients had an open fracture of the femoral shaft. Femoral neck fracture was initially missed in 27% patients and the timing of delayed diagnosis was at an average of 11.1 days after injury. For detecting femoral neck fractures, minimal displacement of the femoral neck fracture was a risk factor, whereas computed tomography (CT) was a protective factor. The incidence of AVNFH was 6.8% at an average of 36.8 months after injury. The AVNFH group had more displaced femoral neck fractures at the time of surgery, but there was no difference in the timing of diagnosis compared to non-AVNFH group. The femoral shaft showed considerable healing problems, with an average union time of 29.7 weeks and a 20.2% nonunion rate. CONCLUSION: Ipsilateral femoral neck and shaft fractures had a high rate of missed diagnosis, especially in minimally displaced fractures; however, CT was a protective factor. AVNFH occurred in 6.8% and was related to femoral neck fracture displacement, but not delayed diagnosis. The femur nonunion rate was high, which warrants attention.

Outcomes of fracture-related infections - do organism, depth of involvement, and temporality count?

Purpose: To determine mortality and outcomes of patients diagnosed with fracture-related infections (FRIs).Methods: FRI patients treated at a trauma centre between 2001 and 2020 were analysed. The primary outcome was 1-year mortality; mortality associations with FRI organism, depth of involvement, and temporality were investigated with multivariable survival analysis. Healthcare-associated and serological outcomes were reported as secondary outcomes. Results: 311 FRIs with mean age of 67.0 and median Charlson comorbidity index of 0 were analysed. Methicillin-sensitive Staphylococcus aureus (MSSA) (29.9%) was the most frequently implicated organism. The majority of FRIs were deep infections (62.7%). FRIs were diagnosed at a median of 40 (IQR 15-200) days post index surgery. The mean follow-up was 5.9 years. One-year mortality amounted to 17.7%. MSSA FRIs were associated with better survival (adj HR 0.34, 95%CI 0.15-0.76, p = 0.008). There was no difference in survivorship between deep or superficial FRI (adj HR 0.86, 95%CI 0.62-1.19, p = 0.353) or in relation to onset time (adj HR 1.0, 95%CI 0.99-1.00, p = 0.943). Implant removal or debridement alone was performed in 61.7% and 17% respectively. Antibiotics was prescribed for 53 (IQR 23-110) days, and patients were hospitalised for 39 (IQR 19-78) days. CRP and ESR normalised in 70.3% (median 46 days) and 53.8% (median 86 days) patients respectively. Conclusion: Fracture-related infections are associated with significant mortality and morbidity regardless of depth and temporality. Non-MSSA FRIs are associated with inferior survival.

Biomechanical comparison of the undercut thread design versus conventional buttress thread for the lag screw of the dynamic hip screw system.

Objective: To compare the fixation stability of the lag screw with a undercut thread design for the dynamic hip screw (DHS) system versus the lag screw with the conventional buttress thread. Methods: The lag screws with the undercut thread (a flat crest feature, a tip-facing undercut feature) and buttress thread were both manufactured. Fixation stability was investigated using cyclic compressive biomechanical testing on custom osteoporotic femoral head sawbone. The forces required for the same vertical displacement in the two types of lag screw were collected to evaluate the resistance to migration. Varus angle was measured on X-ray images to assess the ability in preventing varus collapse. Finite element analysis (FEA) was performed to analyze the stress and strain distribution at the bone-screw interface of the two types of lag screws. Results: The biomechanical test demonstrated that the force required to achieve the same vertical displacement of the lag screw with the undercut thread was significantly larger than the lag screw with conventional buttress thread (p < 0.05). The average varus angles generated by the undercut and buttress threads were 3.38 ± 0.51° and 5.76 ± 0.38°, respectively (p < 0.05). The FEA revealed that the region of high-stress concentration in the bone surrounding the undercut thread was smaller than that surrounding the buttress thread. Conclusion: The proposed DHS system lag screw with the undercut thread had higher migration resistance and superior fixation stability than the lag screw with the conventional buttress thread.

Orthogeriatric Multidisciplinary Co-Management Across Acute and Rehabilitation Care Improves Length of Stay, Functional Outcomes and Complications in Geriatric Hip Fracture Patients.

Introduction: As the global number of geriatric hip fracture cases continues to proliferate, a newly developed orthogeriatric co-management multidisciplinary care model has been implemented since November 2018 to meet further increases in demand. Our objective was to evaluate the effectiveness of the new pathway in improving the clinical outcomes of fragility hip fractures. Methods: The data of geriatric hip fracture patients from 1 April 2018 till 30 October 2018 was collected as the conventional orthopaedic care model (pre-orthogeriatric care model) to compare with data from the orthogeriatric co-management model, 1 Feb 2019 till 31 August 2019. Clinical outcomes were analyzed between the groups, with the efficiency of the programme reflected in the total length of stay in acute and convalescent hospitals. Results: 194 patients were recruited to the conventional group and 207 were recruited to the orthogeriatric group, 290 patients (72.3%) were female. The mean (SD) patient age was 84.2 (7.9) years. The median length of stay in the acute and rehabilitation hospitals decreased by 1 day and 2 days, respectively (P=.001). The orthogeriatric group was associated with a higher Modified Barthel Index score on discharge from the rehabilitation hospital and more patients in the orthogeriatric collaboration group received osteoporosis medication prescription within one year after the index fracture. There was no difference in the 28-days unplanned readmission rate, complication rate, mortality rate or Elderly Mobility Scale scores on discharge from the rehabilitation hospital between the two groups. Conclusion: Orthogeriatric collaboration has been proven to be effective in terms of a decreased length of stay in both the acute and the rehabilitation hospitals.

Corrigendum: The Development of a Magnesium-Releasing and Long-Term Mechanically Stable Calcium Phosphate Bone Cement Possessing Osteogenic and Immunomodulation Effects for Promoting Bone Fracture Regeneration.

[This corrects the article DOI: 10.3389/fbioe.2021.803723.].

Development and initial validation of a novel thread design for nonlocking cancellous screws.

High failure rates have been associated with nonlocking cancellous screws with a typical buttress thread in patients with osteoporotic bone. This study aimed to develop a novel thread design and compare its fixation stability with that of a typical buttress thread. Nonlocking cancellous screws with a novel thread design (proximal flank angle of 120 degrees, a flat crest feature, a tip-facing undercut feature) and nonlocking cancellous screws with a typical buttress thread were manufactured using stainless steel. Fixation stabilities were evaluated individually by the axial pullout and lateral migration tests, and they were evaluated in pairs together with a dynamic compression plate in an osteoporotic bone substitute (10 PCF polyurethane foam per ASTM F1839) under cyclic craniocaudal and torsional loadings. Pullout strength and lateral migration resistance for the individual screw test and the force, torque, and number of cycles required to achieve specific displacement and torsion for the multi-screw test were comparatively analyzed between both screw types. A finite element analysis model was constructed to analyze the stress distributions in the bone tissue adjacent to the threads. The biomechanical test revealed the novel undercut thread had superior axial pullout strength, lateral migration resistance, and superior fixation stability when applied to a dynamic compression plate under cyclic craniocaudal loading and torsional loading than those in the typical buttress thread. The finite element analysis simulation revealed that the novel thread can distribute stress more evenly without high-stress concentration at the adjacent bone tissue when compared to that of a typical buttress thread.

Development and initial validation of a novel undercut thread design for locking screws.

BACKGROUND: Locking screws with a typical buttress thread have high levels of failure in patients with osteoporotic bones. This study aims to develop a novel thread design for the locking screw and compare its fixation stability with the typical buttress thread. METHODS: Locking screws with a novel thread design that possess an undercut feature and locking screws with a typical buttress thread were manufactured from stainless steel. Their fixation stabilities were then evaluated individually under a lateral migration test and evaluated in pairs together with a locking plate (LP) in an osteoporotic bone substitute under cyclic craniocaudal and torsional loadings. A finite element analysis (FEA) model was constructed to analyze the stress distributions present in the bone tissue adjacent to the novel thread versus the buttress thread. RESULTS: The biomechanical test revealed that the novel thread had a significantly higher lateral migration strength than the buttress thread. When applied to a LP, the locking screw with the novel thread requires more cycles and higher forces or torque to resist migration up to 5 mm or 10° than the buttress thread. The FEA simulation showed that the novel thread can make the stress distribute more evenly at the adjacent bone tissue when compared with the buttress thread. CONCLUSIONS: The locking screw with the novel undercut thread had superior lateral migration resistance during both initial and continued migration and superior fixation stability when applied to a LP under both cyclic craniocaudal loading and torsional loading than the locking screw with a typical buttress thread.

Stenotic intercondylar notch is not a risk factor for posterior cruciate ligament rupture: a morphological analyses using magnetic resonance imaging.

PURPOSE: The present study aimed to examine the factors related to the morphological characteristics of the femoral condyle in posterior cruciate ligament rupture in female and male populations. METHODS: One hundred and three patients (41 females, 62 males) with posterior cruciate ligament rupture from 2010 to 2020 were included in this retrospective case-control study. The sex and age of the posterior cruciate ligament rupture group were matched to those of the control group (41 females, 62 males; age range 16-69 years). Magnetic resonance imaging was used to measure the intercondylar notch width, femoral condylar width, and intercondylar notch angle in both the axial and coronal images. The 'α' angle was also measured using magnetic resonance imaging. The notch width index is the ratio of the intercondylar notch width to the femoral condylar width. Three types of intercondylar notch shapes (types A, U, and W) were evaluated in the axial magnetic resonance imaging images. RESULTS: The difference in the mean coronal notch width index between the study groups was statistically significant in the female population. The difference in the mean coronal femoral condylar width between the study groups was statistically significant in the male population. CONCLUSIONS: A larger coronal notch width index was the greatest risk factor for posterior cruciate ligament rupture in the female population. In the male population, decreased coronal condylar width was the greatest risk factor for posterior cruciate ligament rupture. The results did not indicate that patients with a PCL rupture have a stenotic intercondylar notch. Posterior cruciate ligament injury prevention strategies could be applied to females with a larger coronal notch width index and males with a decreased condylar width. LEVELS OF EVIDENCE: Level III.

Topical administration of tranexamic acid in elderly patients undergoing short femoral nailing for intertrochanteric fracture: A randomised controlled trial.

INTRODUCTION: Topical application of tranexamic acid (TXA) has been proposed as an alternative to intravenous administration to reduce perioperative bleeding in orthopaedic surgery. The purpose of this randomised controlled trial was to evaluate the efficacy and safety of 1 g topically applied TXA in patients undergoing fixation of intertrochanteric hip fractures by short femoral nailing. METHODS: A total of 121 patients were enrolled between May 2018 and January 2020. Patients were randomly allocated (1:1) to receive either 10 mL (1 g) of TXA or 10 mL of normal saline (NS) injected through the subfascial drain following wound closure. Total blood loss, total drain output and blood transfusion requirements up to postoperative day 3 were recorded. Rates of thromboembolic complications and mortality up to 90 days postoperatively were also compared. RESULTS: There was no statistically significant difference in total blood loss, total drain output or proportion of patients requiring transfusions. Median total blood loss was 1.088 L (IQR: 0.760-1.795) in the TXA group and 1.078 L (IQR: 0.797-1.722) in the NS group (P = .703). Median total drain output was 60 mL (IQR: 40-140) in the TXA group and 70 mL (IQR: 30-168) in the NS group (P = .696). Blood transfusions were administered in 29 patients (47.5%) in the TXA group and 27 patients (45.0%) in the NS group (P = .782). There was also no difference in frequency of thrombotic complications or mortality within 90 days. There were five thrombotic events in the TXA group and four in the NS group (P = .751). The 90-day mortality rate was 6.6% (4 patients) in the TXA group and 3.3% (2 patients) in the NS group (P = .680). CONCLUSION: A 1 g dose of topically administered TXA did not produce any difference in blood loss, transfusion requirements, thromboembolic complications, or 90-day mortality. Future trials may consider the effect of larger doses in patients undergoing hip fracture fixation surgery.

The effect of early mobilization on functional outcomes after hip surgery in the Chinese population - A multicenter prospective cohort study.

OBJECTIVE: To compare the functional status and quality of life (QoL) between patients who underwent an early mobilization scheme and those who underwent a late mobilization scheme after hip fracture fixation surgery in elderly Chinese patients. METHODS: This was a prospective cohort study. Patients (≥65 years old) with unstable intertrochanteric fractures treated with intramedullary nails were recruited from nine centers in China. Study centers either performed early mobilization or late mobilization scheme. All patients performed immediate in-bed mobilization after surgery and followed a standardized daily exercise program at home during the first 12 weeks. Functional status was measured by the Modified Barthel Index at postoperative visit, 6 weeks, and 12 weeks. QoL was measured by the EuroQol-5D (EQ-5D) at 12 weeks. RESULTS: One hundred and forty-eight patients were enrolled to early mobilization, and 136 to late mobilization. At 6 weeks, early mobilization resulted in a significantly better Modified Barthel Index than late mobilization (mean [SD]: 83.7 [12.0] vs. 67.0 [17.5], p < .001). Adjusted mixed effects model showed significantly higher Modified Barthel Index for early mobilization at postoperative visit, 6 weeks, and 12 weeks (all p < .001). Patients in the early mobilization group had slightly better EQ-5D Index at 12 weeks than patients in the late mobilization group (mean: 0.91 vs 0.87, p = .002). CONCLUSIONS: Early postoperative mobilization resulted in better functional outcomes up to 12 weeks. QoL was rated statistically significantly better in the early mobilization group, but the difference was small and may not be clinically relevant.

Development and validation of a modularized external fixator for generating standardized fracture healing micromotions in rats.

AIMS: To fully verify the reliability and reproducibility of an experimental method in generating standardized micromotion for the rat femur fracture model. METHODS: A modularized experimental device has been developed that allows rat models to be used instead of large animal models, with the aim of reducing systematic errors and time and money constraints on grouping. The bench test was used to determine the difference between the measured and set values of the micromotion produced by this device under different simulated loading weights. The displacement of the fixator under different loading conditions was measured by compression tests, which was used to simulate the unexpected micromotion caused by the rat's ambulation. In vivo preliminary experiments with a small sample size were used to test the feasibility and effectiveness of the whole experimental scheme and surgical scheme. RESULTS: The bench test showed that a weight loading < 500 g did not affect the operation of experimental device. The compression test demonstrated that the stiffness of the device was sufficient to keep the uncontrollable motion between fracture ends, resulting from the rat's daily activities, within 1% strain. In vivo results on 15 rats prove that the device works reliably, without overburdening the experimental animals, and provides standardized micromotion reproductively at the fracture site according to the set parameters. CONCLUSION: Our device was able to investigate the effect of micromotion parameters on fracture healing by generating standardized micromotion to small animal models. Cite this article: Bone Joint Res 2021;10(11):714-722.

S2-alar-iliac screw and S1 pedicle screw fixation for the treatment of non-osteoporotic sacral fractures: a finite element study.

BACKGROUND: Five different sacral fracture fixation methods were compared using finite element (FE) analysis to study their biomechanical characteristics. METHODS: Denis type I sacral fractures were created by FE modeling. Five different fixation methods for the posterior pelvic ring were simulated: sacroiliac screw (SIS), lumbopelvic fixation (LPF), transiliac internal fixator (TIFI), S2-alar-iliac (S2AI) screw and S1 pedicle screw fixation (S2AI-S1) and S2AI screw and contralateral S1 pedicle screw fixation (S2AI-CS1). Four different loading methods were implemented in sequence to simulate the force in standing, flexion, right bending and left twisting, respectively. Vertical stiffness, relative displacement and change in relative displacement were recorded and analyzed. RESULTS: As predicted by the FE model, the vertical stiffness of the five groups in descending order was S2AI-S1, SIS, S2AI-CS1, LPF and TIFI. In terms of relative displacement, groups S2AI-S1 and S2AI-CS1 displayed a lower mean relative displacement, although group S2AI-CS1 exhibited greater displacement in the upper sacrum than group S2AI-S1. Group SIS displayed a moderate mean relative displacement, although the displacement of the upper sacrum was smaller than the corresponding displacement in group S2AI-CS1, while groups LPF and TIFI displayed larger mean relative displacements. Finally, in terms of change in relative displacement, groups TIFI and LPF displayed the greatest fluctuations in their motion, while groups SIS, S2AI-S1 and S2AI-CS1 displayed smaller fluctuations. CONCLUSION: Compared with SIS, unilateral LPF and TIFI, group S2AI-S1 displayed the greatest biomechanical stability of the Denis type I sacral fracture FE models. When the S1 pedicle screw insertion point on the affected side is damaged, S2AI-CS1 can be used as an appropriate alternative to S2AI-S1.

Chitosan-strontium chondroitin sulfate scaffolds for reconstruction of bone defects in aged rats.

Bone defects caused by trauma have become increasingly common in aged populations. Clinically, because of the relatively decreased bone healing capacity compared with the youth adults, bone defect repair in the elderly remains challenging. The development of effective biomaterials targeted at bone defects in the elderly is a key component of bone-tissue engineering strategies. However, little attention has been paid to bone regeneration in the elderly. Here, we developed a new scaffold chitosan-Strontium chondroitin sulfate (CH-SrCS) and evaluated its effect on improving bone regeneration. We find that the CH-SrCS scaffold displayed positive effects on downregulation of inflammation and osteoclastogenesis related mRNA expressions while demonstrating a significant increase in the expression level of BMP2. Finally, we show that the bone defects healing effects as assessed using an aged rats' bone defects model. Ultimately, this work also provides insights into the design of effective biomaterials targeted at bone defects in the elderly.