An innovative method for controlled synthesis of bicomponent monolayer films obtained by reduction of diazonium.

This study presents a novel method based on the electrochemical co-reduction of two aryldiazonium salts, enabling the synthesis of controlled two-component monolayer thin films on carbon in a single step. By introducing a 12-carbon alkyl chain as a spacer between the aryldiazonium function and the functional group, precise control over film thickness and composition was achieved. The alkyl chain effectively standardizes the reduction potential, enabling the equalization of reactivity and precise stoichiometric control. Experimental results from spectroscopic, electrochemical, and X-ray photoelectron spectroscopy analyses validate the effectiveness of the method in controlling the composition of the mixed layers.

From Monolayer to Multilayer: Perylenediimide Diazonium Derivative Acting Either as a Growth Inhibitor or a Growth Enhancer.

Fine control of electrografting kinetics of diazonium salts is of paramount importance, particularly when considering the application of diazoniums for the fabrication of 2D nanomaterials. In this work, we develop controlled grafting of a perylenediimide (PDI) moiety separated with a 12-carbon aliphatic chain from aryldiazonium. The particular design of the diazonium cation synthesized for this study allows for fine tuning of the surface coverage by simple adjustment of the applied potential. Indeed, according to the potential imposed at the working electrode, the PDI moiety can either enhance the charge propagation within the growing layer or consume the diazonium salt in the bulk solution via redox cross-reaction. With this approach, the surface functionalization can be restricted to a monolayer or a multilayer in a robust and elegant manner, obeying Langmuir or first-order kinetics of electrografting, respectively. The experimental observations are supported with in situ spectroelectrochemical investigations aimed to differentiate the reduction of PDI moieties in the deposited layer and the bulk solution. A tentative mechanistic scheme is proposed, and numerical simulations are undertaken to rationalize the data.

Capacitive Impedance for Following In-Situ Grafting Kinetics of Diazonium Salts.

A new method to follow in-situ grafting kinetics of diazonium compounds based on imposing small amplitude high frequency AC oscillations at grafting potential, is outlined. This enables the time-resolved measurements of capacitive impedance concomitantly with the growth of the organic layer at the working electrode. The impedance values were quantitatively correlated with the ex-situ (from voltammograms) and in-situ (from quartz crystal microbalance) measured surface coverages, providing a validation of the new methodology. The versatility of the developed approach was demonstrated on the grafting via reduction of 4-nitrobenzenediazonium on Au and glassy carbon (GC) substrates and via deposition of in-situ generated diazonium salts from 1-aminoanthraquinone and 4-ferrocenylaniline on GC. The capacitive impedance measurements are simple, fast, and non-destructive, making it an appealing methodology for an exploration of grafting kinetics of a wide range of diazonium salts.

Optically Controlled Electron Transfer in a ReI Complex.

Ultrafast optical control of intramolecular charge flow was demonstrated, which paves the way for photocurrent modulation and switching with a highly wavelength-selective ON/OFF ratio. The system that was explored is a fac-[Re(CO)3 (TTF-DPPZ)Cl] complex, where TTF-DPPZ=4',5'-bis(propylthio)tetrathiafulvenyl[i]dipyrido[3,2-a:2',3'-c]phenazine. DFT calculations and AC-Stark spectroscopy confirmed the presence of two distinct optically active charge-transfer processes, namely a metal-to-ligand charge transfer (MLCT) and an intra-ligand charge transfer (ILCT). Ultrafast transient absorption measurements showed that the ILCT state decays in the ps regime. Upon excitation to the MLCT state, only a long-lived 3 MLCT state was observed after 80 ps. Remarkably, however, the bleaching of the ILCT absorption band remained as a result of the effective inhibition of the HOMO-LUMO transition.

Metalla-Assembled Electron-Rich Tweezers: Redox-Controlled Guest Release Through Supramolecular Dimerization.

Developing methodologies for on-demand control of the release of a molecular guest requires the rational design of stimuli-responsive hosts with functional cavities. While a substantial number of responsive metallacages have already been described, the case of coordination-tweezers has been less explored. Herein, we report the first example of a redox-triggered guest release from a metalla-assembled tweezer. This tweezer incorporates two redox-active panels constructed from the electron-rich 9-(1,3-dithiol-2-ylidene)fluorene unit that are facing each other. It dimerizes spontaneously in solution and the resulting interpenetrated supramolecular structure can dissociate in the presence of an electron-poor planar unit, forming a 1:1 host-guest complex. This complex dissociates upon tweezer oxidation/dimerization, offering an original redox-triggered molecular delivery pathway.

Supramolecular chemistry of helical foldamers at the solid-liquid interface: self-assembled monolayers and anion recognition.

The synthesis of a redox-active helical foldamer and its immobilization onto a gold electrode are described. These large molecular architectures are grafted in a reproducible manner and provide foldamer-based self-assembled monolayers displaying recognition properties.

Redox-controlled hybridization of helical foldamers.

Tetrathiafulvalene redox units were grafted at both extremities of an oligopyridine-dicarboxamide foldamer through a straightforward copper-catalyzed azide-alkyne cycloaddition. The present work demonstrates that the hybridization equilibrium of foldamers can be tuned through redox stimulations.

Electrochemically driven interfacial halogen bonding on self-assembled monolayers for anion detection.

Electrochemically driven interfacial halogen bonding between redox-active SAMs and halide anions was quantitatively studied for the first time. The halogen bond donor properties were switched on by electrochemically controlling the oxidation state of the adsorbates. Experimental data and simulation show high binding enhancement towards halide anions compared to homogeneous systems.

Click Chemistry: A Versatile Method for Tuning the Composition of Mixed Organic Layers Obtained by Reduction of Diazonium Cations.

Postfunctionalization of glassy carbon electrodes previously modified by reduction of 4-azidobenzenediazonium was exploited to conveniently synthesize controlled mixed organic layers. Huisgen 1,3-dipolar cycloaddition was used to anchor functional entities to azide platform. By this way, ((4-ethynylphenyl)carbamoyl)ferrocene (ϕ-Fc) was coimmobilized with a set of acetylene derivatives: 1-ethynyl-4-nitrobenzene (ϕ-NO2), 4-ethynylaniline (ϕ-NH2) or ethylnylbenzene (ϕ). The composition of the resulting organic layers was tuned by adjusting the acetylene derivatives ratio in the postfunctionalization binary solution. Electronic properties of the substituents beared by the aromatic rings were found to have a strong impact on the cycloaddition kinetics toward the confined azide moieties. From this study, rules to prepare finely tuned bifunctional organic layers can be anticipated.

Thienylene vinylene dimerization: from solution to self-assembled monolayer on gold.

The electrochemical and spectroelectrochemical studies of thienylene vinylene (TV) derivatives in the immobilized state are compared with the ones obtained in solution. The results highlight the exaltation of the dimerization process onto TV-based self-assembled monolayers, in which the π interaction is maintained even after 75% dilution.

Controlling the Host-Guest Interaction Mode through a Redox Stimulus.

A proof-of-concept related to the redox-control of the binding/releasing process in a host-guest system is achieved by designing a neutral and robust Pt-based redox-active metallacage involving two extended-tetrathiafulvalene (exTTF) ligands. When neutral, the cage is able to bind a planar polyaromatic guest (coronene). Remarkably, the chemical or electrochemical oxidation of the host-guest complex leads to the reversible expulsion of the guest outside the cavity, which is assigned to a drastic change of the host-guest interaction mode, illustrating the key role of counteranions along the exchange process. The reversible process is supported by various experimental data (1 H NMR spectroscopy, ESI-FTICR, and spectroelectrochemistry) as well as by in-depth theoretical calculations performed at the density functional theory (DFT) level.

Lithium n-Doped Polyaniline as a High-Performance Electroactive Material for Rechargeable Batteries.

The discovery of conducting lithium-doped polyaniline with reversible redox chemistry allows simultaneous unprecedented capacity and stability in a non-aqueous Li battery. This compound (lithium emeraldinate) was synthesized by lithium-proton exchange on the emeraldine base in an anhydrous lithium-based electrolyte. A combination of UV/Vis-NIR spectroelectrochemistry, XPS, FTIR, and EQCM characterization allowed a unified description of the chemical and electrochemical behavior, showing facile charge delocalization of the doped states and the reversibility of the redox processes in this form of polyaniline. From a practical point of view, lithium emeraldinate behaves as a high-capacity organic active material (230 mAh g-1 ) that enables preparation of relatively thick composite electrodes with a low amount of carbon additives and high energy density (460 Wh kg-1 ). Concomitantly, at 1C rate, 400 cycles were achieved without significant capacity loss, while the coulombic efficiency is greater than 99 %.

Very Strong Binding for a Neutral Calix[4]pyrrole Receptor Displaying Positive Allosteric Binding.

The dual-analyte responsive behavior of tetraTTF-calix[4]pyrrole receptor 1 has been shown to complex electron-deficient planar guests in a 2:1 fashion by adopting a so-called 1,3-alternate conformation. However, stronger 1:1 complexes have been demonstrated with tetraalkylammonium halide salts that defer receptor 1 to its cone conformation. Herein, we report the complexation of an electron-deficient planar guest, 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA, 2) that champions the complexation with 1, resulting in a high association constant Ka = 3 × 1010 M-2. The tetrathiafulvalene (TTF) subunits in the tetraTTF-calix[4]pyrrole receptor 1 present a near perfect shape and electronic complementarity to the NTCDA guest, which was confirmed by X-ray crystal structure analysis, DFT calculations, and electron density surface mapping. Moreover, the complexation of these species results in the formation of a charge transfer complex (22⊂1) as visualized by a readily apparent color change from yellow to brown.

A fascinating multifaceted redox-active chelating ligand: introducing the N,N'-dimethyl-3,3'-biquinoxalinium "methylbiquinoxen" platform.

To intimately combine a chelating ligand function with the numerous properties of a viologen-like redox-active centre would offer a rare possibility to design controllable multi-redox states, whose properties arise from strongly correlated phenomena between the organic ligand as well as with any metalloid coordinated centres. Such a concept previously proved to be feasible, however is not widely applicable owing to challenges in terms of synthesis, isolation, and aerial sensitivity of both the ligand and its metal complexes. Here we report the first stable example of such a redox-active molecule, N,N'-dimethyl-3,3'-biquinoxalinium2+/˙+/0 "methylbiquinoxen, MBqn2+/˙+/0", which shows a rich redox chemistry and chelates a metal ion in the case of the metal complex [CdCl2(MBqn0)]. This goes beyond what is possible to achieve using viologens, which are limited by not providing chelation as well as having no accessible biradicaloid state, corresponding to the neutral direduced MBqn0 open-shell behaviour we observe here.

Glycoluril-tetrathiafulvalene molecular clips: on the influence of electronic and spatial properties for binding neutral accepting guests.

Glycoluril-based molecular clips incorporating tetrathiafulvalene (TTF) sidewalls have been synthesized through different strategies with the aim of investigating the effect of electrochemical and spatial properties for binding neutral accepting guests. We have in particular focused our study on the spacer extension in order to tune the intramolecular TTF···TTF distance within the clip and, consequently, the redox behavior of the receptor. Carried out at different concentrations in solution, electrochemical and spectroelectrochemical experiments provide evidence of mixed-valence and/or π-dimer intermolecular interactions between TTF units from two closed clips. The stepwise oxidation of each molecular clip involves an electrochemical mechanism with three one-electron processes and two charge-coupled chemical reactions, a scheme which is supported by electrochemical simulations. The fine-tunable π-donating ability of the TTF units and the cavity size allow to control binding interaction towards a strong electron acceptor such as tetrafluorotetracyanoquinodimethane (F4-TCNQ) or a weaker electron acceptor such as 1,3-dinitrobenzene (m-DNB).

Indolinooxazolidine: a versatile switchable unit.

The design of multiresponsive systems continues to arouse a lot of interest. In such multistate/multifunctional systems, it is possible to isomerize a molecular system from one metastable state to another by application of different stimulation such as light, heat, proton, or electron. In this context, some researches deal with the design of multimode switch where a same interconversion between two states could be induced by using indifferently two or more different kind of stimuli. Herein, we demonstrate that the association of an indolinooxazolidine moiety with a bithiophene unit allows the development of a new trimode switch. A reversible conversion between a colorless closed form and a colorful open form can be equally performed by light, proton, or electrical stimulation. In addition, the oxidation of this system allows the generation of a third metastable state.

Spontaneous grafting of nitrophenyl groups on carbon: effect of radical scavenger on organic layer formation.

The effect of a radical scavenger (DPPH: 2,2-diphenyl-1-picrylhydrazyl) on the spontaneous covalent grafting of nitrophenyl functionalities on a vitreous carbon substrate using the 4-nitrobenzene diazonium cation has been studied by electrochemical measurements and X-ray photoelectron spectroscopy. The addition of micromolar concentrations of DPPH to the diazonium solution efficiently limits the multilayer formation and leads to monolayer surface coverage. Control of polyaryl layer formation via the capture of the reactive nitrophenyl radical was also found to increase the proportion of nitrophenyl groups grafted to the surface via azo bridges. This work validates the recently reported strategy using a radical scavenger to prevent the formation of a polyaryl layer without interfering with direct surface grafting.

A facile route to steady redox-modulated nitroxide spin-labeled surfaces based on diazonium chemistry.

A TEMPO derivative was covalently grafted onto carbon and gold surfaces via the diazonium chemistry. The acid-dependent redox properties of the nitroxyl group were exploited to elaborate electro-switchable magnetic surfaces. ESR characterization demonstrated the reversible and permanent magnetic character of the material.

TEMPO mixed SAMs: electrocatalytic efficiency versus surface coverage.

Electrocatalytic behavior of TEMPO derivative SAMs on gold has been studied in the presence of benzyl alcohol. The results demonstrate that interfacial activity of the SAMs can be enhanced by diluting the TEMPO moiety with an alkyl passive matrix. The absolute catalytic activity exhibits a maximum for an intermediate value of the surface coverage of catalytic centers. The most significant feature is the monotonic increase of the turnover (relative activity) until a limit value reached for low TEMPO surface concentrations. The electrocatalytic performances seem to be governed by a combination of two factors: the physical accessibility (by alcohol molecules in solution) and the regeneration (via the comproportionation of oxoammonium and hydroxylamine before electrochemical reoxidation) of the catalytic centers.

Synthesis and evaluation of naphthoic acid derivatives as fluorescent probes to screen advanced glycation end-products breakers.

Advanced glycation end-products, namely AGEs, are involved in the pathogenesis of numerous diseases. If AGEs inhibitors are well-known, only few products are described as compounds able to destroy those deleterious products. In this work, we describe naphthoic acid derivatives, particularly 1-(naphthalen-1-yl)propane-1,2-dione 9, allowing the simple and rapid detection of AGEs breakers using a 96-well microplate fluorescence assay. Since the inaugurate publication about AGEs breakers whose activity was demonstrated using HPLC analysis, this work proposes the first assay suitable for automated and high throughput screening of AGEs breakers.