Transition from Collisional to Collisionless Regimes in Interpenetrating Plasma Flows on the National Ignition Facility.

A study of the transition from collisional to collisionless plasma flows has been carried out at the National Ignition Facility using high Mach number (M>4) counterstreaming plasmas. In these experiments, CD-CD and CD-CH planar foils separated by 6-10 mm are irradiated with laser energies of 250 kJ per foil, generating ∼1000 km/s plasma flows. Varying the foil separation distance scales the ion density and average bulk velocity and, therefore, the ion-ion Coulomb mean free path, at the interaction region at the midplane. The characteristics of the flow interaction have been inferred from the neutrons and protons generated by deuteron-deuteron interactions and by x-ray emission from the hot, interpenetrating, and interacting plasmas. A localized burst of neutrons and bright x-ray emission near the midpoint of the counterstreaming flows was observed, suggesting strong heating and the initial stages of shock formation. As the separation of the CD-CH foils increases we observe enhanced neutron production compared to particle-in-cell simulations that include Coulomb collisions, but do not include collective collisionless plasma instabilities. The observed plasma heating and enhanced neutron production is consistent with the initial stages of collisionless shock formation, mediated by the Weibel filamentation instability.

Ultrafast probing of magnetic field growth inside a laser-driven solenoid.

We report on the detection of the time-dependent B-field amplitude and topology in a laser-driven solenoid. The B-field inferred from both proton deflectometry and Faraday rotation ramps up linearly in time reaching 210 ± 35 T at the end of a 0.75-ns laser drive with 1 TW at 351 nm. A lumped-element circuit model agrees well with the linear rise and suggests that the blow-off plasma screens the field between the plates leading to an increased plate capacitance that converts the laser-generated hot-electron current into a voltage source that drives current through the solenoid. ALE3D modeling shows that target disassembly and current diffusion may limit the B-field increase for longer laser drive. Scaling of these experimental results to a National Ignition Facility (NIF) hohlraum target size (∼0.2cm^{3}) indicates that it is possible to achieve several tens of Tesla.

Dense plasma heating by crossing relativistic electron beams.

Here we investigate, using relativistic fluid theory and Vlasov-Maxwell simulations, the local heating of a dense plasma by two crossing electron beams. Heating occurs as an instability of the electron beams drives Langmuir waves, which couple nonlinearly into damped ion-acoustic waves. Simulations show a factor 2.8 increase in electron kinetic energy with a coupling efficiency of 18%. Our results support applications to the production of warm dense matter and as a driver for inertial fusion plasmas.

Development of an interpretive simulation tool for the proton radiography technique.

Proton radiography is a useful diagnostic of high energy density (HED) plasmas under active theoretical and experimental development. In this paper, we describe a new simulation tool that interacts realistic laser-driven point-like proton sources with three dimensional electromagnetic fields of arbitrary strength and structure and synthesizes the associated high resolution proton radiograph. The present tool's numerical approach captures all relevant physics effects, including effects related to the formation of caustics. Electromagnetic fields can be imported from particle-in-cell or hydrodynamic codes in a streamlined fashion, and a library of electromagnetic field "primitives" is also provided. This latter capability allows users to add a primitive, modify the field strength, rotate a primitive, and so on, while quickly generating a high resolution radiograph at each step. In this way, our tool enables the user to deconstruct features in a radiograph and interpret them in connection to specific underlying electromagnetic field elements. We show an example application of the tool in connection to experimental observations of the Weibel instability in counterstreaming plasmas, using ∼10(8) particles generated from a realistic laser-driven point-like proton source, imaging fields which cover volumes of ∼10 mm(3). Insights derived from this application show that the tool can support understanding of HED plasmas.

Rates of transport through a capsule membrane to attain Donnan equilibrium.

The swelling of a capsule consisting of salt solution and polyelectrolyte, surrounded by a membrane, is studied. The membrane allows salt and water to pass, but is impermeable to polyelectrolyte molecules. Equilibrium swelling of the capsule is governed by Donnan equilibrium. Transport rates of a salt and water through the membrane are expressed in terms of a Darcy permeability and a salt diffusivity. The governing equations predict that the rate at which equilibrium is attained as the external salt concentration varies is controlled by the timescale for diffusion of salt, rather than by that for Darcy flow. Experiments were performed using capsules with membranes made of covalently linked HSA and alginate. The capsule volume varied with a single relaxation rate when the external salt concentration was changed, as predicted by theory. This constitutes the first step toward a simple method for determining the membrane properties of capsules by measuring rates of change of capsule volume.

Undescended testicle and a meconium-filled hemiscrotum: prenatal ultrasound appearance.

We report a case of a meconium-filled hemiscrotum detected by prenatal ultrasound and misdiagnosed as in-utero testicular torsion. Over the 2 months that the mass was followed, the ultrasound characteristics and size changed significantly. Imaging immediately after birth and early surgical treatment resulted in a favorable outcome.

Cross-linked beta-cyclodextrin microcapsules. II. Retarding effect on drug release through semi-permeable membranes.

Microcapsules were prepared by interfacial cross-linking of beta-cyclodextrins (beta-CD) with terephthaloylchloride (TC) as described previously. Complexation assays were conducted with propranolol HCl. After 1 h incubation of 50 mg lyophilized microcapsules in 10 ml propranolol solution, the amounts of fixed drug were 507.5+/-8.6 micromol and 811.2+/-16.0 micromol per g lyophilized microcapsules with 1 mM and 2 mM solutions, respectively. A dialysis experiment was then performed. After 1 h incubation of microcapsules (10 or 50 mg) in 10 ml of 2 mM propranolol solution, the suspension was dialysed against a phosphate buffer pH 7.4 at 37 degrees C. The drug diffusion was all the more retarded that the amount of added beta-CD microcapsules was higher. Finally, double microcapsules were prepared using a suspension of beta-CD microcapsules (10-100 mg) in a solution of methylene blue in an acetate buffer pH 7.4. After adding human serum albumin (HSA), the suspension was emulsified in cyclohexane and double microcapsules were obtained by cross-linking the HSA with TC. In vitro release studies showed that the incorporation of beta-CD microcapsules resulted in a decrease in release rate of methylene blue, the decrease being related to the amount of encapsulated beta-CD microcapsules. The study then suggests interesting applications of beta-CD microcapsules for modulating the release rate of drugs through semi-permeable membranes.

Cross-linked beta-cyclodextrin microcapsules: preparation and properties.

Microcapsules were prepared by interfacial cross-linking of beta-cyclodextrins (beta-CD) with terephthaloyl chloride (TC). Batches were prepared from beta-CD solutions in 1 M NaOH, using 5% TC and a 30 min reaction time. Microcapsules were studied with respect to morphology (microscopy), size (laser diffraction technique) and, for selected batches, IR spectroscopy, determination of beta-CD content (polarimetry after alkaline dissolution of microcapsules) and complexing properties, evaluated using p-nitrophenol (pNP) as the guest molecule. Well-formed microcapsules were obtained from 5, 7.5, and 10% beta-CD solutions. The mean size of all batches was in the 10-35 microm range. The IR spectrum showed bands at 1724, 1280 and 731 cm(-1), reflecting the formation of esters. The beta-CD contents were 46, 56-58 or 60-66% for batches prepared from 5, 7.5 or 10% beta-CD solutions, respectively. The experiments conducted with 1 mM pNP showed a rapid complexation reaching a maximum within 1 h. When incubating 50 mg lyophilized microcapsules in 10 ml pNP solution, the maximal fixation (97.8 micromol/g microcapsules) was observed for small-sized particles ( approximately 11 microm) prepared from a 7.5% beta-CD solution. The method then appears as a simple and rapid procedure to provide stable microcapsules, having an interesting guest-binding ability.

Serum albumin-alginate coated beads: mechanical properties and stability.

According to a previously described method, alginate beads were prepared from a Na-alginate solution containing propylene glycol alginate (PGA) and human serum albumin (HSA). The solution was added dropwise to a CaCl2 solution. The beads were treated with NaOH, which started the formation of amide bonds between HSA and PGA at the periphery, giving a membrane. Batches of beads with increasingly thick membranes were prepared using growing concentrations of NaOH, and studied with a texture analyser. When raising NaOH concentration, the rupture strength progressively increased, and the resistance strength to a deformation of 50% of total height also increased before slightly decreasing for the highest NaOH concentration. Variations of bead elasticity were also observed. When the beads were prepared with saline reducing gelation time from 10 to 5 min, and reaction time from 15 to 5 min, mechanical properties varied more progressively with the NaOH concentration, while the results became more reproducible. A series of assays conducted with 0.01 M NaOH confirmed the importance of using a short gelation time, and saline rather than water. Stability assays were also performed. The results were compared to those of alginate-polylysine coated beads and showed the interest of the transacylation method.

In-vivo delivery of therapeutic proteins by genetically-modified cells: comparison of organoids and human serum albumin alginate-coated beads.

We have designed a self-assembling multimeric soluble CD4 molecule by inserting the C-terminal fragment of the alpha chain of human C4-binding protein (C4bp alpha) at the C-terminal end of human soluble CD4 genes. This CD4-C4bp alpha fusion protein (sMulti-CD4) and two other reference molecules, a fusion protein of human serum albumin (HSA) and the first two domains of CD4 (HSA-CD4) and monomeric soluble CD4 (sMono-CD4), were delivered in vivo by genetically modified 293 cells. These cells were implanted in mice as organoids and also encapsulated in HSA alginate-coated beads. sMulti-CD4 showed an apparent molecular weight of about 300-350 kDa, in accordance with a possible heptamer formula. sMulti-CD4 produced either in cell culture or in vivo in mice appeared to be a better invitro inhibitor of HIV infection than sMono-CD4. Plasma levels of sMulti-CD4, HSA-CD4, and sMono-CD4 reached approximately 2,300, 2,700, and 170 ng/mL, respectively, 13 weeks after in-vivo organoid implantation, which had formed tumours at that time. This suggests that the plasma half-life of sMulti-CD4 is much longer than that of sMono-CD4. The 293 xenogeneic cells encapsulated in HSA alginate-coated beads remained alive and kept secreting sMono-CD4 or HSA-CD4 continuously at significant levels for 18 weeks in nude mice, without tumour formation. When implanted in immunocompetent Balb/c mice, they were rejected two to three weeks after implantation. In contrast, encapsulated BL4 hybridoma cells remained alive and kept secreting BL4 anti-CD4 mAb for at least four weeks in Balb/c mice. These results suggest the clinical potential of the C4bp-multimerizing system, which could improve both the biological activity and the poor in-vivo pharmacokinetic performance of a monomeric functional protein like soluble CD4. These data also show that a systemic delivery of therapeutic proteins, including immunoglobulins, can be obtained by the in-vivo implantation of engineered allogeneic cells encapsulated in HSA alginate-coated beads.

Survival, proliferation, and functions of porcine hepatocytes encapsulated in coated alginate beads: a step toward a reliable bioartificial liver.

Orthotopic liver transplantation is the most effective treatment for fulminant hepatic failure. As an alternative treatment, an efficient extracorporeal bioartificial liver should contain a large yield of functional hepatocytes with an immunoprotective barrier, for providing temporary adequate metabolic support to allow spontaneous liver regeneration or for acting as a bridge toward transplantation. Survival, proliferation, and functions of porcine hepatocytes were evaluated in primary cultures and after embedding in alginate beads, which were subsequently coated with a membrane made by a transacylation reaction between propylene glycol alginate and human serum albumin. Disruption of total pig livers by collagenase perfusion/recirculation allowed the obtention of up to 10(11) hepatocytes with a viability greater than 95%. Hepatocytes in conventional cultures or embedded in coated alginate beads survived for about 10 days, secreted proteins, particularly albumin, and maintained several phase I and II enzymatic activities, namely ethoxyresorufin-O-deethylase, oxidation of nifedipine to pyridine, phenacetin deethylation to paracetamol, glucuroconjugation of paracetamol, and N-acetylation of procainamide. Typical features of mitosis and [3H]thymidine incorporation indicated that porcine hepatocytes proliferated in both conventional cultures and alginate beads. The efficacy of the membrane surrounding alginate beads for protecting cells from immunoglobulins was tested by embedding HLA-typed human lymphocytes, which were subsequently incubated with specific anti-HLA immunoglobulin G and complement. These data show that large yields of porcine hepatocytes that are embedded in coated alginate beads remain functional and are isolated from large molecular weight molecules, such as immunoglobulins. This system represents a promising tool for the design of an extracorporeal bioartificial liver, containing xenogeneic hepatocytes, to treat acute liver disease in humans.

Coating alginate beads with cross-linked biopolymers: a novel method based on a transacylation reaction.

Stable membranes were formed around alginate beads using a transacylation reaction between polysaccharidic esters, namely propylene glycol alginate (PGA) or pectin, and various proteins (human serum albumin (HSA), ovalbumin, bovine hemoglobin, lactoserum proteins). In a standard procedure, two reagents (PGA or pectin+protein) were added to a Na-alginate solution: beads were formed by dropwise addition into a calcium solution. Then the transacylation reaction was started by alkalinization of the bead suspension. A membrane was formed around the beads, made of a protein directly bound to a polysaccharide through amide linkages. The thickness of the membranes and the lysis time in trypsin were increased by raising the amount of NaOH used for the transacylation step. In a modified procedure, coated beads were obtained, incorporating PGA in the initial Na-alginate solution, and HSA in the transacylation bath. Activated charcoal was encapsulated in HSA-PGA beads, giving particles with adsorption properties towards creatinine. Assays were performed using PGA associated with alkaline phosphatase as the membrane-forming protein. Stable beads were obtained having a relative activity of 39.3%, as compared with free enzyme.

Fourier transform infrared spectroscopic studies of cross-linked human serum albumin microcapsules. 3. Influence of terephthaloyl chloride concentration on spectra and correlation with microcapsule morphology and size.

Microcapsules were prepared from human serum albumin (HSA) by interfacial cross-linking with terephthaloyl chloride (TC). TC concentrations were increased from 0.5 to 5% w/v, while pH (9.8) and reaction time (30 min) were kept constant. Fourier transform infrared (FT-IR) spectra of lyophilized microcapsules were compared. Correlations were established with microcapsule morphology and size. The results were compared with those of previous studies exploring pH or reaction time and with those of parallel determinations of microcapsule free amino groups. With 0.5% TC, decreases of the ester-assigned 1724-cm-1 band area and of the carboxylate-assigned 1394-cm-1 band area were observed compared with pure HSA. This phenomenon was attributed to a removal of contaminating lipids of HSA. Increasing TC concentration resulted in a progressive increase of the band areas at 1724 cm-1 (esters) and 1795 cm-1 (anhydrides), in a further decrease of the 1394-cm-1 band area (carboxylates), and in marked alterations of teh 1340-1080-cm-1 region. These changes, which revealed the progressive acylation of hydroxy and carboxylate groups of HSA, were accompanied by an increase of the 1624-cm-1 band area (beta-sheet), reflecting interchain H-bonding due to cross-linking. As observed in the previous studies of pH and reaction time, important spectral changes corresponded to low values of -NH2 content, to a decrease in microcapsule mean size (from > 30 to < 15 microns), and to modifications of the membrane surface (made rough).

Polyhydroxamic microcapsules prepared from proteins: a novel type of chelating microcapsules.

Microcapsules were prepared from three proteins, namely human serum albumin (HSA), bovine fibrinogen and ovalbumin, by an interfacial crosslinking process using terephthaloylchloride. They were further treated with alkaline hydroxylamine in order to disrupt ester and anhydride bonds in the walls. All microcapsules survived the treatment. They exhibited a significant increase in size and became sensitive to trypsin. The hydroxylamine treatment also resulted in attachment of hydroxamic groups to the membrane, making the microcapsules capable of iron binding. These properties were evaluated after soaking microcapsules in a 140 mumol/l ferric solution and determination of iron in the supernantant. Lower amounts of iron were found to be complexed by HSA microcapsules (mean value: 29.3 mumol iron/g microcapsule dry weight) as compared with fibrinogen and ovalbumin microcapsules (43.7 and 44.9 mumol/g, respectively). Microcapsule chelating properties were further improved by esterification of the free carboxyl groups of the membrane with benzyl alcohol or ethanol using a carbodiimide, prior to the hydroxylamine treatment. Comparable values of iron binding were obtained from esterified and hydroxylamine-treated batches prepared from the three proteins (about 50 mumol iron/g).

Fourier-transform infrared spectroscopic studies of cross-linked human serum albumin microcapsules. 2. Influence of reaction time on spectra and correlation with microcapsule morphology and size.

Microcapsules were prepared from human serum albumin (HSA) through interfacial cross-linking with terephthaloyl chloride (TC). Reaction times were increased from 2 to 60 min, while pH (9.8) and TC concentration (2.5% w/v) were kept constant. Fourier-transform infrared (FT-IR) spectra of lyophilized microcapsules were compared. Correlations were established with microcapsule morphology and size, as had been done in a previous study exploring the effect of increasing pH values. Microcapsules obtained after 2 min had to be considered separately. Minor alterations were observed in the spectrum as compared with pure HSA. They consisted of a decrease of the ester-assigned 1724-cm-1 band and of the carboxylate-assigned 1394-cm-1 band, attributed to a removal of contaminating lipids of HSA, and an increase of the 1624-cm-1 band, attributed to interchain H bonding following acylation of the NH2 groups. Prolonging the reaction time resulted in a progressive increase of the bands at 1724 (esters), 1795 (anhydrides), and 1624 cm-1 (beta-sheet), in a further decrease of the 1394-cm-1 band (carboxylates), and in marked alterations of the 1340-1080-cm-1 region. These important changes, which appeared after 5 min, reflect the progressive acylation of the hydroxy and carboxylate groups of HSA. As in the previous series of pH-based assays, important spectral changes were shown to correspond to a decrease in microcapsule mean size (from 32 to < 15 microns) and in important modifications of the membrane surface, made rough.

Mixed-wall microcapsules made of cross-linked proteins and polysaccharides: preparation and properties.

Microcapsules were prepared through an interfacial cross-linking process using terephthaloylchloride and applied to mixtures of a protein (human serum albumin or gelatin) and a polysaccharide. Their properties were compared with those of microcapsules prepared from the protein alone. Morphological characteristics of mixed-walled microcapsules were often modified, as seen by light and electron microscopy. Otherwise, they appeared to be more resistant to digestive media: they were gastroresistant, and their degradation time in pancreatin was prolonged upon raising the amount of polysaccharide. Moreover, the lysis time was shown to depend on the nature of the polysaccharide: microcapsules prepared from acidic polysaccharides at pH 9.8 were hydrolyzed faster. Lastly, the resistance increased upon decreasing the polymers/acylchloride ratio, or upon raising the reaction pH. Encapsulation assays were carried out with sodium salicylate, which was incorporated with a high efficiency. Mixed-walled microcapsules allowed a prolonged release of the tracer in vitro. As compared with protein microcapsules, the release profiles of batches prepared with hydroxyethylstarch exhibited only slight modifications of the initial part of the curve, while a significant burst effect was observed with carboxymethylcellulose-containing microcapsules.

Fourier transform infrared spectroscopic studies of human serum albumin microcapsules prepared by interfacial cross-linking with terephthaloylchloride: influence of polycondensation pH on spectra and relation with microcapsule morphology and size.

Fourier transform infrared (FT-IR) spectroscopic studies were performed on microcapsules prepared through interfacial cross-linking of human serum albumin (HSA) with terephthaloylchloride at various pH values (5.9 to 11). Correlations were established with morphology and size of microcapsules. Increasing polycondensation pH resulted notably in a progressive increase of peaks at 1795 and 1724 cm-1, assigned to anhydride and ester; respectively, in a decrease of the carboxylate-assigned 1394 cm-1 peak, and in alterations of the 1340-1080-cm-1 region. These spectral changes were most pronounced from pH 9 and were shown to correspond to smaller-sized microcapsules (mean size decreased from 30-40 microns to less than 15 microns) with rough surfaces. Further soaking of highly cross-linked microcapsules in a pH 7.5 buffer resulted in the disappearance of the 1795 cm-1 peak, with a concurrent increase of the 1394 cm-1 peak and a decrease of the 1724 cm-1 peak. These changes, attributed to complete breaking of anhydride and partial hydrolysis of esters, were accompanied by an unwrinkling of the microcapsule membrane, then made smooth, and a significant increase in size. Treating microcapsules with hydroxylamine under alkaline conditions allowed complete reversal of the spectral alterations assigned to anhydride and ester formation. A comparable (slightly higher) increase in size was observed with microcapsules which exhibited smooth surfaces and a low density.

[Microcapsules with modulable properties made with cross-linked proteins and polysaccharides]. / Microcapsules à propriétés modulables formées de protéines et de polysaccharides coréticulés.

A cross-linking process was applied to mixtures of a protein (gelatin A or B) and a polysaccharide. Mixed-walled microcapsules were then obtained, which exhibited properties different from those of microcapsules prepared from the protein alone. They were shown to be more resistant to enzymatic lysis and this effect depended on the ratio of the polysaccharide, on its nature and on the cross-linking pH. Very hydrophilic microcapsules were obtained through cross-linking of gelatin admixed with alginate or carboxymethylcellulose. The addition of alginate to gelatin resulted in a slower release of encapsulated pilocarpine.

[The effect of cross-linked protein microcapsules on cell cultures]. / Effet de microcapsules de protéines réticulées sur des cultures de cellules.

Microcapsules (diameter range: 5 to 100 microns) prepared through interfacial cross-linking of proteins with terephthaloylchloride exhibited a cytotoxic effect on L 1210 cell cultures. IC50 was: 0.86 mg/ml +/- 0.24 for microcapsules prepared from human serum albumin (AT microcapsules) and 0.63 mg/ml +/- 0.05 for those obtained from egg white lysozyme (LT microcapsules). With K 562 cells IC50 were 0.42 +/- 0.11 mg/ml (AT microcapsules), 0.06 mg/ml (LT microcapsules). An increase in the cytotoxicity was observed when reducing the size of the microcapsules and when increasing the reaction pH or the terephthaloylchloride concentration, or the relative concentration of microcapsules vs cells. On the contrary, the cytotoxic effect decreased, when prolonging the cross-linking time. The activity was not affected when the microcapsules were washed with toluene or with an alkaline solute. The cytotoxic effect, which appears for relatively high doses, apparently involves a contact between the microcapsules and the cells and seems to be related with the degree of cross-linking of the constitutive protein.