Insights on Flow Behavior of Foam in Unsaturated Porous Media during Soil Flushing.

One-dimensional column and two-dimensional tank experiments were carried out to determine (1) the physics of foam flow and propagation of foaming gas, foaming liquid, and foam; (2) the pressure distribution along foam flow and the effect of media permeability, foam flow rate and foam quality on foam injection pressure; and (3) the migration and distribution property of foam flow in homogeneous and heterogeneous sediments. The results demonstrated that: (1) gas and liquid front were formed ahead of the foam flow front, the transport speed order is foaming gas > foaming liquid > foam flowing; (2) injection pressure mainly comes from the resistance to bubble migration. Effect of media permeability on foam injection pressure mainly depends on the physics and behavior of foam flow; (3) foam has a stronger capacity of lateral spreading, besides, foam flow was uniformly distributed across the foam-occupied region, regardless of the heterogeneity of porous media.

Transport characteristics of nanoscale zero-valent iron carried by three different "vehicles" in porous media.

This study investigated the transport properties of nanoscale zero-valent iron (Fe(0)) (nZVI) carried by three vehicles: water, sodium dodecyl sulfate (SDS) solution, and SDS foam. Batch experiments were conducted to assess the sedimentation capability of nZVI particles in these three vehicles. Column experiments were conducted to investigate the transport properties of nZVI in porous media formed with different sizes of sand (0.25 mm to 0.5 mm, 0.5 mm to 0.9 mm, and 0.9 mm to 1.4 mm). Three main results were obtained. First, the batch experiments revealed that the stabilities of nZVI particles in SDS solution and SDS foam were improved, compared with that of nZVI particles in water. Moreover, the sedimentation of nZVI in foam was closely associated with the foam drainage volume. The nZVI content in foam was similar to that in the original foaming suspension, and the nZVI particle distribution in foam became significantly more uniform at a stirring speed of 3000 r/min. Second, the transport of nZVI was enhanced by foam compared with water and SDS solution for 0.25 mm to 0.5 mm diameter sand. For sand with diameters of 0.5 mm to 0.9 mm and 0.9 mm to 1.4 mm, the mobility of nZVI carried by SDS solution was optimal, followed by that of nZVI carried by foam and water. Thus, the mobility of nZVI in finer sand was significantly enhanced by foam, compared with that in coarse sand. In contrast, compared with the bare nZVI suspension and nZVI-laden foam, the spatial distribution of nZVI particles carried by SDS solution was significantly uniform along the column length. Third, the SDS concentration significantly influenced the migration of nZVI in porous media. The enhancement in the migration of nZVI carried by SDS solution was greater at an SDS dose of 0.25% compared with that at the other three doses (0.2%, 0.5%, and 1%) for sand with a 0.25 mm to 0.5 mm diameter. Increased SDS concentrations positively affected the transport of nZVI by foam for sand with a 0.25 mm to 0.5 mm diameter, and the SDS concentrations for enhancing the mobility of nZVI carried by SDS foam satisfied the following order: 1% > 0.5% > 0.25% > 0.2%. Thus, SDS solution and SDS foam were better vehicles than water for delivering nZVI particles to porous media for contamination remediation.

Mechanisms of surfactant-enhanced air sparging in different media.

This article presents the results of a laboratory investigation of the mechanisms of surfactant-enhanced air sparging (SEAS) in different media. Two kinds of media (medium sand and gravel) were used in one-dimensional column experiments, designed to determine (1) the functional relationship between the air saturation and surface tension of water during SEAS, and (2) the contaminant removal mechanisms in different air travel modes (channels and bubbles) under different surface tension values. The results demonstrated that when air traveled in the form of channels, a decrease in surface tension accordingly reduced capillary pressure in porous media. Air saturation therefore increased, thereby considerably improving contaminant removal. The variations in removal efficiency under different surface tension values coincide with the trend of air saturation change. When air traveled in the form of bubbles, the SEAS-induced air saturation in the column was directly affected by foam stability and foamability, rather than by the surface tension of water. Surfactant addition improved only the contaminant removal rate, but the decrease in lingering concentration was insignificant. The results of this study can serve as theoretical bases for SEAS application in contaminated sites.