Clinical Outcomes of Patients with Non-Small Cell Lung Cancer Leptomeningeal Disease Following Receipt of EGFR-Targeted Therapy, Immune-Checkpoint Blockade, Intrathecal Chemotherapy, or Radiation Therapy Alone.

BACKGROUND: EGFR-targeted therapy (ETT) and immune-checkpoint blockade (ICB) have shown promising results in treating NSCLC brain metastases (BM). However, little is known of their effect in treating leptomeningeal disease (LMD). PATIENTS AND METHODS: This is a retrospective review of 80 patients diagnosed with NSCLC LMD from January 2014 to March 2021. Patients were grouped based on initial LMD treatment: radiotherapy (RT) alone, ETT, ICB, and intrathecal chemotherapy (ITC). RESULTS: EGFR mutation was present in 22 patients (28%). Twenty patients had positive cytology in cerebrospinal fluid, while 60 patients were diagnosed based on MRI with clinical correlation. The RT alone group consisted primarily of whole brain radiation (n = 20; 77%), stereotactic radiation (n = 3; 12%), and palliative spine radiation (n = 2; 7%). There were no significant differences amongst the treatment groups in age, performance status, or neurologic symptoms. Overall, the 6-month overall survival (OS) and craniospinal progression free survival (CS-PFS) were 35% and 24%, respectively. The 6-month OS for the ETT, ICB, ITC, and RT alone groups was 64%, 33%, 57%, and 29% respectively (log-rank P = .026). The 6-month CS-PFS for the ETT, ICB, ITC, and RT alone groups was 43%, 33%, 29%, and 19% respectively (log-rank P = .049). Upon univariate analysis, receipt of ETT compared to RT alone reached significance for OS (HR 0.35, P = .006) and CS-PFS (HR 0.39, P = .013). CONCLUSIONS: The prognosis for patients with NSCLC LMD remains poor overall. However, the receipt of ETT for patients with EGFR-positive disease was associated with improved outcomes.

Effect of tetrahedral framework nucleic acids on the reconstruction of tendon-to-bone injuries after rotator cuff tears.

Clinicians and researchers have always faced challenges in performing surgery for rotator cuff tears (RCT) due to the intricate nature of the tendon-bone gradient and the limited long-term effectiveness. At the same time, the occurrence of an inflammatory microenvironment further aggravates tissue damage, which has a negative impact on the regeneration process of mesenchymal stem cells (MSCs) and eventually leads to the production of scar tissue. Tetrahedral framework nucleic acids (tFNAs), novel nanomaterials, have shown great potential in biomedicine due to their strong biocompatibility, excellent cellular internalisation ability, and unparalleled programmability. The objective of this research was to examine if tFNAs have a positive effect on regeneration after RCTs. Experiments conducted in a controlled environment demonstrated that tFNAs hindered the assembly of inflammasomes in macrophages, resulting in a decrease in the release of inflammatory factors. Next, tFNAs were shown to exert a protective effect on the osteogenic and chondrogenic differentiation of bone marrow MSCs under inflammatory conditions. The in vitro results also demonstrated the regulatory effect of tFNAs on tendon-related protein expression levels in tenocytes after inflammatory stimulation. Finally, intra-articular injection of tFNAs into a rat RCT model showed that tFNAs improved tendon-to-bone healing, suggesting that tFNAs may be promising tendon-to-bone protective agents for the treatment of RCTs.

Tetrahedral framework nucleic acids enhance the chondrogenic potential of human umbilical cord mesenchymal stem cells via the PI3K/AKT axis.

The field of regenerative medicine faces a notable challenge in terms of the regeneration of articular cartilage. Without proper treatment, it can lead to osteoarthritis. Based on the research findings, human umbilical cord mesenchymal stem cells (hUMSCs) are considered an excellent choice for regenerating cartilage. However, there is still a lack of suitable biomaterials to control their ability to self-renew and differentiate. To address this issue, in this study using tetrahedral framework nucleic acids (tFNAs) as a new method in an in vitro culture setting to manage the behaviour of hUMSCs was proposed. Then, the influence of tFNAs on hUMSC proliferation, migration and chondrogenic differentiation was explored by combining bioinformatics methods. In addition, a variety of molecular biology techniques have been used to investigate deep molecular mechanisms. Relevant results demonstrated that tFNAs can affect the transcriptome and multiple signalling pathways of hUMSCs, among which the PI3K/Akt pathway is significantly activated. Furthermore, tFNAs can regulate the expression levels of multiple proteins (GSK3ß, RhoA and mTOR) downstream of the PI3K-Akt axis to further enhance cell proliferation, migration and hUMSC chondrogenic differentiation. tFNAs provide new insight into enhancing the chondrogenic potential of hUMSCs, which exhibits promising potential for future utilization within the domains of AC regeneration and clinical treatment.

Incorporation of Magnesium Ions into an Aptamer-Functionalized ECM Bioactive Scaffold for Articular Cartilage Regeneration.

The regeneration and reconstruction of articular cartilage (AC) after a defect are often difficult. The key to the treatment of AC defects lies in regeneration of the defect site and regulation of the inflammatory response. In this investigation, a bioactive multifunctional scaffold was formulated using the aptamer Apt19S as a mediator for mesenchymal stem cell (MSC)-specific recruitment and the enhancement of cellular chondrogenic and inflammatory regulation through the incorporation of Mg2+. Apt19S, which can recruit MSCs in vitro and in vivo, was chemically conjugated to a decellularized cartilage extracellular matrix (ECM)-lysed scaffold. The results from in vitro experiments using the resulting scaffold demonstrated that the inclusion of Mg2+ could stimulate not only the chondrogenic differentiation of synovial MSCs but also the increased polarization of macrophages toward the M2 phenotype. Additionally, Mg2+ inhibited NLRP3 inflammasome activation, thereby decreasing chondrocyte pyroptosis. Subsequently, Mg2+ was incorporated into the bioactive multifunctional scaffold, and the resulting scaffold promoted cartilage regeneration in vivo. In conclusion, this study confirms that the combination of Mg2+ and aptamer-functionalized ECM scaffolds is a promising strategy for AC regeneration based on in situ tissue engineering and early inflammatory regulation.

Global trends in research of high-throughput sequencing technology associated with chronic wounds from 2002 to 2022: A bibliometric and visualized study.

Background: Chronic wounds are a complex medical problem. With the difficulty of skin healing, the microbial ecology of chronic wounds is an essential factor affecting wound healing. High-throughput sequencing (HTS) technology is a vital method to reveal the microbiome diversity and population structure of chronic wounds. Objective: The aim of this paper was to delineate the scientific output characteristics, research trends, hotspots and frontiers of HTS technologies related to chronic wounds globally over the past 20 years. Methods: We searched the Web of Science Core Collection (WoSCC) database for articles published between 2002 and 2022 and their full record information. The Bibliometrix software package was used to analyze bibliometric indicators and VOSviewer visualization analysis results. Results: Ultimately, a total of 449 original articles were reviewed, and the results showed that the number of annual publications (Nps) about HTS associated with chronic wounds has steadily increased over the last 20 years. The United States and China produce the most articles and have the highest H-index, while the United States and England have the largest number of citations (Nc) in this field. The University of California, Wound Repair and Regeneration and National Institutes of Health Nih United States were the most published institutions, journals and fund resources, respectively. The global research could be divided into 3 clusters as follows: microbial infection of chronic wounds, the healing process of wounds and microscopic processes, skin repair mechanism stimulated by antimicrobial peptides and oxidative stress. In recent years, "wound healing", "infections", "expression", "inflammation", "chronic wounds", "identification" and "bacteria" "angiogenesis", "biofilms" and "diabetes" were the most frequently used keywords. In addition, research on "prevalence", "gene expression", "inflammation" and "infection" has recently become a hotspot. Conclusions: This paper compares the research hotspots and directions in this field globally from the perspectives of countries, institutions and authors, analyzes the trend of international cooperation, and reveals the future development direction of the field and research hotspots of great scientific research value. Through this paper, we can further explore the value of HTS technology in chronic wounds to better solve the problem of chronic wounds.

Recent advances in tendon tissue engineering strategy.

Tendon injuries often result in significant pain and disability and impose severe clinical and financial burdens on our society. Despite considerable achievements in the field of regenerative medicine in the past several decades, effective treatments remain a challenge due to the limited natural healing capacity of tendons caused by poor cell density and vascularization. The development of tissue engineering has provided more promising results in regenerating tendon-like tissues with compositional, structural and functional characteristics comparable to those of native tendon tissues. Tissue engineering is the discipline of regenerative medicine that aims to restore the physiological functions of tissues by using a combination of cells and materials, as well as suitable biochemical and physicochemical factors. In this review, following a discussion of tendon structure, injury and healing, we aim to elucidate the current strategies (biomaterials, scaffold fabrication techniques, cells, biological adjuncts, mechanical loading and bioreactors, and the role of macrophage polarization in tendon regeneration), challenges and future directions in the field of tendon tissue engineering.

Hierarchical porous ECM scaffolds incorporating GDF-5 fabricated by cryogenic 3D printing to promote articular cartilage regeneration.

BACKGROUND: In recent years, there has been significant research progress on in situ articular cartilage (AC) tissue engineering with endogenous stem cells, which uses biological materials or bioactive factors to improve the regeneration microenvironment and recruit more endogenous stem cells from the joint cavity to the defect area to promote cartilage regeneration. METHOD: In this study, we used ECM alone as a bioink in low-temperature deposition manufacturing (LDM) 3D printing and then successfully fabricated a hierarchical porous ECM scaffold incorporating GDF-5. RESULTS: Comparative in vitro experiments showed that the 7% ECM scaffolds had the best biocompatibility. After the addition of GDF-5 protein, the ECM scaffolds significantly improved bone marrow mesenchymal stem cell (BMSC) migration and chondrogenic differentiation. Most importantly, the in vivo results showed that the ECM/GDF-5 scaffold significantly enhanced in situ cartilage repair. CONCLUSION: In conclusion, this study reports the construction of a new scaffold based on the concept of in situ regeneration, and we believe that our findings will provide a new treatment strategy for AC defect repair.

Editorial Commentary: Meniscus Regeneration Based on Adipose-Derived Stem Cells: How Far Are We From Clinical Application?

The goal of meniscal tissue engineering is tissue remodeling and functional recovery. Autologous, tissue-engineered adipose-derived stem cell (ADSC) sheets promote meniscal regeneration in rabbit meniscal defects in vivo. Moreover, compared with a control group, in the ADSC sheet model, both histologic scores and gene expression are more similar to normal meniscal tissue. ADSC sheets promote meniscal regeneration regardless of whether the defect involves the whole width or inner half of a meniscal defect. Mechanical properties are also important, and experimental data show encouraging mechanical properties of meniscus tissue reconstructed from ADSC sheets. Cell sheet technology is a promising therapeutic strategy for meniscal regenerative medicine and tissue engineering. Theoretically, cell sheet transplantation could result in superior outcomes to traditional cell-free scaffolds, and further research is needed before clinical application.

Preparation and Application of Decellularized ECM-Based Biological Scaffolds for Articular Cartilage Repair: A Review.

Cartilage regeneration is dependent on cellular-extracellular matrix (ECM) interactions. Natural ECM plays a role in mechanical and chemical cell signaling and promotes stem cell recruitment, differentiation and tissue regeneration in the absence of biological additives, including growth factors and peptides. To date, traditional tissue engineering methods by using natural and synthetic materials have not been able to replicate the physiological structure (biochemical composition and biomechanical properties) of natural cartilage. Techniques facilitating the repair and/or regeneration of articular cartilage pose a significant challenge for orthopedic surgeons. Whereas, little progress has been made in this field. In recent years, with advances in medicine, biochemistry and materials science, to meet the regenerative requirements of the heterogeneous and layered structure of native articular cartilage (AC) tissue, a series of tissue engineering scaffolds based on ECM materials have been developed. These scaffolds mimic the versatility of the native ECM in function, composition and dynamic properties and some of which are designed to improve cartilage regeneration. This review systematically investigates the following: the characteristics of cartilage ECM, repair mechanisms, decellularization method, source of ECM, and various ECM-based cartilage repair methods. In addition, the future development of ECM-based biomaterials is hypothesized.

Hydrogel composite scaffolds achieve recruitment and chondrogenesis in cartilage tissue engineering applications.

BACKGROUND: The regeneration and repair of articular cartilage remains a major challenge for clinicians and scientists due to the poor intrinsic healing of this tissue. Since cartilage injuries are often clinically irregular, tissue-engineered scaffolds that can be easily molded to fill cartilage defects of any shape that fit tightly into the host cartilage are needed. METHOD: In this study, bone marrow mesenchymal stem cell (BMSC) affinity peptide sequence PFSSTKT (PFS)-modified chondrocyte extracellular matrix (ECM) particles combined with GelMA hydrogel were constructed. RESULTS: In vitro experiments showed that the pore size and porosity of the solid-supported composite scaffolds were appropriate and that the scaffolds provided a three-dimensional microenvironment supporting cell adhesion, proliferation and chondrogenic differentiation. In vitro experiments also showed that GelMA/ECM-PFS could regulate the migration of rabbit BMSCs. Two weeks after implantation in vivo, the GelMA/ECM-PFS functional scaffold system promoted the recruitment of endogenous mesenchymal stem cells from the defect site. GelMA/ECM-PFS achieved successful hyaline cartilage repair in rabbits in vivo, while the control treatment mostly resulted in fibrous tissue repair. CONCLUSION: This combination of endogenous cell recruitment and chondrogenesis is an ideal strategy for repairing irregular cartilage defects.

Tetrahedral framework nucleic acids promote the biological functions and related mechanism of synovium-derived mesenchymal stem cells and show improved articular cartilage regeneration activity in situ.

Many recent studies have shown that joint-resident mesenchymal stem cells (MSCs) play a vital role in articular cartilage (AC) in situ regeneration. Specifically, synovium-derived MSCs (SMSCs), which have strong chondrogenic differentiation potential, may be the main driver of cartilage repair. However, both the insufficient number of MSCs and the lack of an ideal regenerative microenvironment in the defect area will seriously affect the regeneration of AC. Tetrahedral framework nucleic acids (tFNAs), notable novel nanomaterials, are considered prospective biological regulators in biomedical engineering. Here, we aimed to explore whether tFNAs have positive effects on AC in situ regeneration and to investigate the related mechanism. The results of in vitro experiments showed that the proliferation and migration of SMSCs were significantly enhanced by tFNAs. In addition, tFNAs, which were added to chondrogenic induction medium, were shown to promote the chondrogenic capacity of SMSCs by increasing the phosphorylation of Smad2/3. In animal models, the injection of tFNAs improved the therapeutic outcome of cartilage defects compared with that of the control treatments without tFNAs. In conclusion, this is the first report to demonstrate that tFNAs can promote the chondrogenic differentiation of SMSCs in vitro and enhance AC regeneration in vivo, indicating that tFNAs may become a promising therapeutic for AC regeneration.

Quantitative analysis of local microcirculation changes in early osteonecrosis of femoral head: DCE-MRI findings.

Aim: This study aims to quantitatively analyze the changes in local microcirculation in early osteonecrosis of the femoral head (ONFH) by dynamic contrast-enhanced (DCE) MRI and to explore the pathophysiological mechanisms of early ONFH. Patients and Methods: We selected 49 patients (98 hips) aged 21-59 years who were clinically diagnosed with early ONFH. A total of 77 femoral heads were diagnosed with different degrees of necrosis according to the Association Research Circulation Osseous (ARCO) staging system, and 21 femoral heads were judged to be completely healthy. All patients underwent DCE-MRI scanning. Pseudocolor images and time-signal intensity curves were generated by Tissue 4D processing software. The volume transfer constant (K trans), extracellular extravascular space, also known as vascular leakage (V e), and transfer rate constant (K ep) of healthy and different areas of necrotic femoral heads were measured on perfusion parameter maps. The differences and characteristics of these parameters in healthy and different areas of necrotic femoral heads were analyzed. Results: The signal accumulation in healthy femoral heads is lower than that of necrotic femoral heads in pseudocolor images. The time-signal intensity curve of healthy femoral heads is along the horizontal direction, while they all have upward trends for different areas of necrotic femoral heads. The mean value of K trans of healthy femoral heads was lower than the integration of necrotic, boundary, and other areas (F = 3.133, P = .036). The K ep value of healthy femoral heads was higher than the integration of lesion areas (F = 6.273, P = .001). The mean V e value of healthy femoral heads was smaller than that of the lesion areas (F = 3.872, P = .016). The comparisons of parameters between different areas and comparisons among healthy areas and lesion areas showed different results. Conclusion: ONFH is a complex ischemic lesion caused by changes in local microcirculation. It mainly manifests as increased permeability of the vascular wall, blood stasis in the posterior circulation, high intraosseous pressure in the femoral head, and decreased arterial blood flow. The application of DCE-MRI scanning to quantitatively analyze the visual manifestations of microcirculation after early ONFH is an ideal method to study the microcirculation changes of necrotic femoral heads.

Chitosan hydrogel/3D-printed poly(ε-caprolactone) hybrid scaffold containing synovial mesenchymal stem cells for cartilage regeneration based on tetrahedral framework nucleic acid recruitment.

Articular cartilage (AC) injury repair has always been a difficult problem for clinicians and researchers. Recently, a promising therapy based on mesenchymal stem cells (MSCs) has been developed for the regeneration of cartilage defects. As endogenous articular stem cells, synovial MSCs (SMSCs) possess strong chondrogenic differentiation ability and articular specificity. In this study, a cartilage regenerative system was developed based on a chitosan (CS) hydrogel/3D-printed poly(ε-caprolactone) (PCL) hybrid containing SMSCs and recruiting tetrahedral framework nucleic acid (TFNA) injected into the articular cavity. TFNA, which is a promising DNA nanomaterial for improving the regenerative microenvironment, could be taken up into SMSCs and promoted the proliferation and chondrogenic differentiation of SMSCs. CS, as a cationic polysaccharide, can bind to DNA through electrostatic action and recruit free TFNA after articular cavity injection in vivo. The 3D-printed PCL scaffold provided basic mechanical support, and TFNA provided a good microenvironment for the proliferation and chondrogenic differentiation of the delivered SMSCs and promoted cartilage regeneration, thus greatly improving the repair of cartilage defects. In conclusion, this study confirmed that a CS hydrogel/3D-printed PCL hybrid scaffold containing SMSCs could be a promising strategy for cartilage regeneration based on chitosan-directed TFNA recruitment and TFNA-enhanced cell proliferation and chondrogenesis.

Meniscal Regenerative Scaffolds Based on Biopolymers and Polymers: Recent Status and Applications.

Knee menisci are structurally complex components that preserve appropriate biomechanics of the knee. Meniscal tissue is susceptible to injury and cannot heal spontaneously from most pathologies, especially considering the limited regenerative capacity of the inner avascular region. Conventional clinical treatments span from conservative therapy to meniscus implantation, all with limitations. There have been advances in meniscal tissue engineering and regenerative medicine in terms of potential combinations of polymeric biomaterials, endogenous cells and stimuli, resulting in innovative strategies. Recently, polymeric scaffolds have provided researchers with a powerful instrument to rationally support the requirements for meniscal tissue regeneration, ranging from an ideal architecture to biocompatibility and bioactivity. However, multiple challenges involving the anisotropic structure, sophisticated regenerative process, and challenging healing environment of the meniscus still create barriers to clinical application. Advances in scaffold manufacturing technology, temporal regulation of molecular signaling and investigation of host immunoresponses to scaffolds in tissue engineering provide alternative strategies, and studies have shed light on this field. Accordingly, this review aims to summarize the current polymers used to fabricate meniscal scaffolds and their applications in vivo and in vitro to evaluate their potential utility in meniscal tissue engineering. Recent progress on combinations of two or more types of polymers is described, with a focus on advanced strategies associated with technologies and immune compatibility and tunability. Finally, we discuss the current challenges and future prospects for regenerating injured meniscal tissues.

3D-Bioprinted Difunctional Scaffold for In Situ Cartilage Regeneration Based on Aptamer-Directed Cell Recruitment and Growth Factor-Enhanced Cell Chondrogenesis.

Articular cartilage (AC) lesions are fairly common but remain an obstacle for clinicians and researchers due to their poor self-healing capacity. Recently, a promising therapy based on the recruitment of autologous mesenchymal stem cells (MSCs) has been developed for the regeneration of full-thickness cartilage defects in the knee joint. In this study, a 3D-bioprinted difunctional scaffold was developed based on aptamer HM69-mediated MSC-specific recruitment and growth factor-enhanced cell chondrogenesis. The aptamer, which can specifically recognize and recruit MSCs, was first chemically conjugated to the decellularized cartilage extracellular matrix and then mixed with gelatin methacrylate to form a photocrosslinkable bioink ready for 3D bioprinting. Together with the growth factor that promoted cell chondrogenic differentiation, the biodegradable polymer poly(ε-caprolactone) was further chosen to impart mechanical strength to the 3D bioprinted constructs. The difunctional scaffold specifically recruited MSCs, provided a favorable microenvironment for cell adhesion and proliferation, promoted chondrogenesis, and thus greatly improved cartilage repair in rabbit full-thickness defects. In conclusion, this study demonstrated that 3D bioprinting of difunctional scaffolds could be a promising strategy for in situ AC regeneration based on aptamer-directed cell recruitment and growth-factor-enhanced cell chondrogenesis.

3D Printed Poly(ε-Caprolactone)/Meniscus Extracellular Matrix Composite Scaffold Functionalized With Kartogenin-Releasing PLGA Microspheres for Meniscus Tissue Engineering.

Meniscus tissue engineering (MTE) aims to fabricate ideal scaffolds to stimulate the microenvironment for recreating the damaged meniscal tissue. Indeed, favorable mechanical properties, suitable biocompatibility, and inherent chondrogenic capability are crucial in MTE. In this study, we present a composite scaffold by 3D printing a poly(ε-caprolactone) (PCL) scaffold as backbone, followed by injection with the meniscus extracellular matrix (MECM), and modification with kartogenin (KGN)-loaded poly(lactic-co-glycolic) acid (PLGA) microsphere (µS), which serves as a drug delivery system. Therefore, we propose a plan to improve meniscus regeneration via KGN released from the 3D porous PCL/MECM scaffold. The final results showed that the hydrophilicity and bioactivity of the resulting PCL/MECM scaffold were remarkably enhanced. In vitro synovium-derived mesenchymal stem cells (SMSCs) experiments suggested that introducing MECM components helped cell adhesion and proliferation and maintained promising ability to induce cell migration. Moreover, KGN-incorporating PLGA microspheres, which were loaded on scaffolds, showed a prolonged release profile and improved the chondrogenic differentiation of SMSCs during the 14-day culture. Particularly, the PCL/MECM-KGN µS seeded by SMSCs showed the highest secretion of total collagen and aggrecan. More importantly, the synergistic effect of the MECM and sustained release of KGN can endow the PCL/MECM-KGN µS scaffolds with not only excellent cell affinity and cell vitality preservation but also chondrogenic activity. Thus, the PCL/MECM-KGN µS scaffolds are expected to have good application prospects in the field of MTE.

The Application of Bioreactors for Cartilage Tissue Engineering: Advances, Limitations, and Future Perspectives.

Tissue engineering (TE) has brought new hope for articular cartilage regeneration, as TE can provide structural and functional substitutes for native tissues. The basic elements of TE involve scaffolds, seeded cells, and biochemical and biomechanical stimuli. However, there are some limitations of TE; what most important is that static cell culture on scaffolds cannot simulate the physiological environment required for the development of natural cartilage. Recently, bioreactors have been used to simulate the physical and mechanical environment during the development of articular cartilage. This review aims to provide an overview of the concepts, categories, and applications of bioreactors for cartilage TE with emphasis on the design of various bioreactor systems.

Alcohol and hepatitis virus-dysregulated lncRNAs as potential biomarkers for hepatocellular carcinoma.

Hepatocellular carcinoma (HCC) is one of the leading causes of cancer-related deaths because of frequent late detection and poor therapeutic outcomes, necessitating the need to identify effective biomarkers for early diagnosis and new therapeutic targets for effective treatment. Long noncoding RNAs (lncRNAs) have emerged as promising molecular markers for diagnosis and treatment. Through analysis of patient samples from The Cancer Genome Atlas database, we identified putative lncRNAs dysregulated in HCC and by its risk factors, hepatitis infection and alcohol consumption. We identified 184 lncRNAs dysregulated in HCC tumors versus paired normal samples, 53 lncRNAs dysregulated in alcohol-drinking patients with hepatitis B, and 5, 456 lncRNAs dysregulated in patients with hepatitis infection. A panel of these candidate lncRNAs' expressions correlated significantly with patient survival, clinical variables, and known genomic alteration in HCC. Two most significantly dysregulated lncRNAs in our computational analysis, lnc-CFP-1:1 and lnc-CD164L2-1:1, were validated in vitro to be dysregulated by alcohol. Our findings suggest that lncRNAs dysregulated by different etiologies of HCC serve as potential disease markers and can be further investigated to develop personalized prevention, diagnosis, and treatment strategies.

Alcohol-dysregulated microRNAs in hepatitis B virus-related hepatocellular carcinoma.

Alcohol consumption and chronic hepatitis B virus (HBV) infection are two well-established risk factors for Hepatocellular carcinoma (HCC); however, there remains a limited understanding of the molecular pathway behind the pathogenesis and progression behind HCC, and how alcohol promotes carcinogenesis in the context of HBV+ HCC. Using next-generation sequencing data from 130 HCC patients and 50 normal liver tissues, we identified a panel of microRNAs that are significantly dysregulated by alcohol consumption in HBV+ patients. In particular, two microRNAs, miR-944 and miR-223-3p, showed remarkable correlation with clinical indication and genomic alterations. We confirmed the dysregulation of these two microRNAs in liver cell lines treated by alcohol and acetaldehyde, and showed that manipulation of miR-223-3p and miR-944 expression induces significant changes in cellular proliferation, sensitivity to doxorubicin, and the expression of both direct-binding and downstream mRNA targets. Together, the results of this study suggest that alcohol consumption in HBV+ HCCs regulates microRNAs that likely play previously uncharacterized roles in the alcohol-associated carcinogenesis of HCC, and future studies of these microRNAs may be valuable for furthering the understanding and treatment of alcohol and HBV-associated HCC.