Diverse Proton-Conducting Nanotubes via a Tandem Macrocyclization and Assembly Strategy.

Macrocycles that assemble into nanotubes exhibit emergent properties stemming from their low dimensionality, structural regularity, and distinct interior environments. We report a versatile strategy to synthesize diverse nanotube structures in a single, efficient reaction by using a conserved building block bearing a pyridine ring. Imine condensation of a 2,4,6-triphenylpyridine-based diamine with various aromatic dialdehydes yields chemically distinct pentagonal [5 + 5], hexagonal [3 + 3], and diamond-shaped [2 + 2] macrocycles depending on the substitution pattern of the aromatic dialdehyde monomer. Atomic force microscopy and in solvo X-ray diffraction demonstrate that protonation of the macrocycles under the mild conditions used for their synthesis drives assembly into high-aspect ratio nanotubes. Each of the pyridine-containing nanotube assemblies exhibited measurable proton conductivity by electrochemical impedance spectroscopy, with values as high as 10-3 S m-1 (90% R.H., 25 °C) that we attribute to differences in their internal pore sizes. This synthetic strategy represents a general method to access robust nanotube assemblies from a universal pyridine-containing monomer, which will enable systematic investigations of their emergent properties.

Two-Dimensional Covalent Organic Framework Solid Solutions.

Covalent organic frameworks (COFs) generally leverage one or two monomers with specific sizes and shapes to access highly symmetric and periodic polymer networks. Almost all reported COFs employ the minimum sets of monomers needed for the polymerization (usually two, sometimes one) and crystallize in high-symmetry topologies. COFs synthesized from more than two monomers usually employ mixtures with different pendant functionalities to distribute these groups statistically throughout the structure, or monomers with different sizes in ratios targeting lower symmetry topologies. Here, we demonstrate that mixtures of monomers with different lengths generate single-phase, hexagonal two-dimensional covalent organic framework (2D COF) solid solutions at continuously variable feed ratios. X-ray diffraction measurements, Fourier-transform infrared spectroscopy, and Pawley refinement indicate that both monomers distribute randomly within the same lattice, and the lattice parameters continuously increase as more of the larger linker is incorporated. Furthermore, COF solid solutions are accessed directly by polymerizing a mixture of monomers but not via linker exchange from a preformed COF. As strain develops from the lattice accommodating monomers with different sizes, the nonlinear relationship between the monomer incorporation and the COF's lattice parameters suggests that bond-bending of the monomers plays a role in incorporating monomers of different lengths into the solid solutions. Solid solution formation represents a new strategy to design 2D COFs and increase their complexity. Specifically, varying the monomer composition of a given network enables many properties, such as the average pore size, to be continuously tuned between those of corresponding pure COFs.

Solvothermal depolymerization and recrystallization of imine-linked two-dimensional covalent organic frameworks.

Mechanistic understanding into the formation and growth of imine-linked two-dimensional (2D) covalent organic frameworks (COFs) is needed to improve their materials quality and access larger crystallite sizes, both of which limit the promise of 2D COFs and 2D polymerization techniques. Here we report a previously unknown temperature-dependent depolymerization of colloidal 2D imine-linked COFs, which offers a new means to improve their crystallinity. 2D COF colloids form at room temperature but then depolymerize when their reaction mixtures are heated to 90 °C. As the solutions are cooled back to room temperature, the 2D COFs repolymerize and crystallize with improved crystallinity and porosity, as characterized by X-ray diffraction, infrared spectroscopy and N2 porosimetry. The evolution of COF crystallinity during the solvothermal depolymerization and repolymerization processes was characterized by in situ wide angle X-ray scattering, and the concentrations of free COF monomers as a function of temperature were quantified by variable temperature 1H NMR spectroscopy. The ability of a 2D COF to depolymerize under these conditions depends on both the identity of the COF and its initial materials quality. For one network formed at room temperature (TAPB-PDA COF), a first depolymerization process is nearly complete, and the repolymerization yields materials with dramatically enhanced crystallinity and surface area. Already recrystallized materials partially depolymerize upon heating their reaction mixtures a second time. A related 2D COF (TAPB-DMTA COF) forms initially with improved crystallinity compared to TAPB-PDA COF and then partially depolymerizes upon heating. These results suggest that both high materials quality and network-dependent properties, such as interlayer interaction strength, influence the extent to which 2D COFs resist depolymerization. These findings offer a new means to recrystallize or solvent anneal 2D COFs and may ultimately inform crystallization conditions for obtaining large-area imine-linked two-dimensional polymers from solution.

Incorporating Functionalized Cellulose to Increase the Toughness of Covalent Adaptable Networks.

Covalent adaptable networks (CANs) are cross-linked polymers that have mechanical properties similar to thermosets at operating conditions yet can be reprocessed by cross-link exchange reactions that are activated by a stimulus. Although CAN exchange dynamics have been studied for many polymer compositions, the tensile properties of these demonstration systems are often inferior compared to those of commercial thermosets. In this study, we explore toughening CANs capable of forming covalent bonds with a reactive filler to characterize the trade-off between improved toughness and longer reprocessing times. Polycarbonate (PC) and polyurethane (PU) CANs were toughened by incorporating cellulose modified with cyclic carbonate groups as a reactive filler with loadings from 1.3 to 6.6 wt %. The addition of 6.6 wt % of the cellulose derivative resulted in a 3.2-fold increase in average toughness for the PC CANs, yet it only increased the characteristic relaxation time of stress relaxation (τ*) via disulfide exchange at 180 °C from 63 to 365 s. The cellulose-containing samples also showed >80% recovery in crosslinking density and mechanical properties after reprocessing. The addition of 3.2 wt % of the functionalized cellulose into a polyethylene glycol-based PU CAN led to a 2.3-fold increase in toughness while increasing τ* at 140 °C from 106 to 157 s. These findings demonstrate the promise of functionalized cellulose as an inexpensive, renewable, and sustainable filler that toughens CANs containing hydroxyl groups.

Supramolecular polymerization provides non-equilibrium product distributions of imine-linked macrocycles.

Supramolecular polymerization of imine-linked macrocycles has been coupled to dynamic imine bond exchange within a series of macrocycles and oligomers. In this way, macrocycle synthesis is driven by supramolecular assembly, either into small aggregates supported by π-π interactions, or high-aspect ratio nanotubes stabilized primarily by electrostatic and solvophobic interactions. For the latter, supramolecular polymerization into nanotubes restricts imine exchange, thereby conferring chemical stability to the assemblies and their constituent macrocycles. Competition in the formation and component exchange among macrocycles favored pyridine-2,6-diimine-linked species due to their rapid synthesis, thermodynamic stability, and assembly into high-aspect ratio nanotubes under the reaction conditions. In addition, the pyridine-containing nanotubes inhibit the formation of similar macrocycles containing benzene-1,3-diimine-linkages, presumably by disrupting their assembly and templation. Finally, we exploit rapid imine exchange within weak, low-aspect ratio macrocycle aggregates to carry out monomer exchange reactions to macrocycles bearing pyridine moieties. Once a pyridine-containing dialdehyde has exchanged into a macrocycle, the macrocycle becomes capable of nanotube formation, which dramatically slows further imine exchange. This kinetic trap provides chemically diverse macrocycles that are not attainable by direct synthetic methods. Together these findings provide new insights into coupling supramolecular polymerization and dynamic covalent bond-forming processes and leverages this insight to target asymmetric nanotubes. We envision these findings spurring further research efforts in the synthesis of nanostructures with designed and emergent properties.

Emissive Single-Crystalline Boroxine-Linked Colloidal Covalent Organic Frameworks.

The synthesis of periodic two-dimensional (2D) polymers and characterization of their optoelectronic behaviors are challenges at the forefront of polymer chemistry and materials science. Recently, we showed that layered 2D polymers known as 2D covalent organic frameworks (COFs) can be synthesized as single crystals by preparing COF particles as colloidal suspensions. Here we expand this approach from the condensation of boronic acids and catechols to the dehydrative trimerization of polyboronic acids. The resulting boroxine-linked colloids are the next class of 2D COFs to be obtained as single-crystalline particles, as demonstrated here for four 2D COFs and one 3D COF. Colloidal stabilization enables detailed structural analysis by synchrotron X-ray diffraction and high-resolution transmission electron microscopy. Solution fluorescence spectroscopy revealed that the COF crystallites are highly emissive compared to their respective monomer solutions. Excitation-emission matrix fluorescence spectroscopy indicated that the origin of this enhanced emission can be attributed to through-space communication of chromophores between COF sheets. These observations will motivate the development of colloidal COF systems as a platform to organize functional aromatic systems into precise and predictable assemblies with emergent properties.

Cooperative Self-Assembly of Pyridine-2,6-Diimine-Linked Macrocycles into Mechanically Robust Nanotubes.

Nanotubes assembled from macrocyclic precursors offer a unique combination of low dimensionality, structural rigidity, and distinct interior and exterior microenvironments. Usually the weak stacking energies of macrocycles limit the length and mechanical strength of the resultant nanotubes. Imine-linked macrocycles were recently found to assemble into high-aspect ratio (>103 ), lyotropic nanotubes in the presence of excess acid. Yet these harsh conditions are incompatible with many functional groups and processing methods, and lower acid loadings instead catalyze macrocycle degradation. Here we report pyridine-2,6-diimine-linked macrocycles that assemble into high-aspect ratio nanotubes in the presence of less than 1 equiv of CF3 CO2 H per macrocycle. Analysis by gel permeation chromatography and fluorescence spectroscopy revealed a cooperative self-assembly mechanism. The low acid concentrations needed to induce assembly enabled nanofibers to be obtained by touch-spinning, which exhibit higher Young's moduli (1.33 GPa) than many synthetic polymers and biological filaments. These findings represent a breakthrough in the design of inverse chromonic liquid crystals, as assembly under such mild conditions will enable the design of structurally diverse and mechanically robust nanotubes from synthetically accessible macrocycles.

Controlled growth of imine-linked two-dimensional covalent organic framework nanoparticles.

Covalent organic frameworks (COFs) consist of monomers arranged in predictable structures with emergent properties. However, improved crystallinity, porosity, and solution processability remain major challenges. To this end, colloidal COF nanoparticles are useful for mechanistic studies of nucleation and growth and enable advanced spectroscopy and solution processing of thin films. Here we present a general approach to synthesize imine-linked 2D COF nanoparticles and control their size by favoring imine polymerization while preventing the nucleation of new particles. The method yields uniform, crystalline, and high-surface-area particles and is applicable to several imine-linked COFs. In situ X-ray scattering experiments reveal the nucleation of amorphous polymers, which crystallize via imine exchange processes during and after particle growth, consistent with previous mechanistic studies of imine-linked COF powders. The separation of particle formation and growth processes offers control of particle size and may enable further improvements in crystallinity in the future.

Improved synthesis of ß-ketoenamine-linked covalent organic frameworks via monomer exchange reactions.

ß-Ketoenamine-linked covalent organic frameworks (COFs) offer excellent structural versatility and outstanding aqueous stability, but their stability complicates obtaining samples with high crystallinity and surface areas. In contrast, imine-linked COFs are often isolated with superior materials quality. Here we synthesize several ß-ketoenamine-linked COFs, including two unreported structures, with unmatched crystallinity and high surface areas by preparing the corresponding imine-linked COF and exchanging its triformylbenzene monomers with triformylphloroglucinol.

Stabilization of HfB12 in Y1-xHfxB12 under Ambient Pressure.

Alloys of metal dodecaborides-YB12 with HfB12-were prepared via arc-melting in order to stabilize the metastable HfB12 high-pressure phase under ambient pressure. Previously, HfB12 had been synthesized only under high-pressure (6.5 GPa). Powder X-ray diffraction (PXRD) and energy-dispersive X-ray spectroscopy (EDS) were used to confirm the purity and phase composition of the prepared samples. The solubility limit for HfB12 in Y1-xHfxB12 (cubic UB12 structure type) was determined to be ∼35 at. % Hf by PXRD and EDS analysis. The value of the cubic unit cell parameter (a) changed from 7.505 Å (pure YB12) to 7.454 Å across the solid solution range. Vickers hardness increased from 40.9 ± 1.6 GPa for pure YB12 to 45.0 ± 1.9 GPa under an applied load of 0.49 N for the Y1-xHfxB12 solid solution composition with ∼28 at. % Hf, suggesting both solid solution hardening and extrinsic hardening due to the formation of secondary phases of hafnium.

Characterization of Aniline Tetramer by MALDI TOF Mass Spectrometry upon Oxidative and Reductive Cycling.

By combining electrochemical experiments with mass spectrometric analysis, it is found that using short chain oligomers to improve the cycling stability of conducting polymers in supercapacitors is still problematic. Cycling tests via cyclic voltammetry over a potential window of 0 to 1.0 V or 0 to 1.2 V in a two-electrode device configuration resulted in solid-state electropolymerization and chain scission. Electropolymerization of the aniline tetramer to generate long chain oligomers is shown to be possible despite the suggested decrease in reactivity and increase in intermediate stability with longer oligomers. Because aniline oligomers are more stable towards reductive cycling when compared to oxidative cycling, future conducting polymer/oligomer-based pseudocapacitors should consider using an asymmetric electrode configuration.