Antioxidant and Anti-Aging Properties of Polyphenol-Polysaccharide Complex Extract from Hizikia fusiforme.

Hizikia fusiforme has a long history of consumption and medicinal use in China. It has been found that natural plants containing polyphenol-polysaccharide complexes have better activity compared with polyphenols and polysaccharides. Therefore, in this study on enzymatic hydrolysis and fractional alcohol precipitation, two kinds of polyphenol-polysaccharide complexes (PPC), PPC1 and PPC2, were initially obtained from Hizikia fusiforme, while the dephenolization of PPC1 and PPC2 produced PPC3 and PPC4. Through in vitro assays, PPC2 and PPC4 were found to have higher antioxidant activity, and thus were selected for testing the PPCs' anti-aging activity in a subsequent in vivo experiment with D-gal-induced aging in mice. The results indicated that PPCs could regulate the expressions of antioxidant enzymes and products of oxidation, elevate the expressions of genes and proteins related to the Nrf2 pathway in the mouse brain, enrich the gut microbiota species and increase the Bacteroidota-Firmicute (B/F) ratio. Above all, the Hizikia fusiforme polyphenol-polysaccharide complex has potential in the development of natural anti-aging drugs.

Anti-Hyperlipidemic Effect of Fucoidan Fractions Prepared from Iceland Brown Algae Ascophyllum nodosum in an Hyperlipidemic Mice Model.

Ascophyllum nodosum, a brown algae abundantly found along the North Atlantic coast, is recognized for its high polysaccharide content. In this study, we investigated the anti-hyperlipidemic effect of fucoidans derived from A. nodosum, aiming to provide information for their potential application in anti-hyperlipidemic therapies and to explore comprehensive utilization of this Iceland brown seaweed. The crude fucoidan prepared from A. nodosum was separated using a diethylethanolamine column, resulting in two fucoidan fractions, AFC-1 and AFC-2. Both fractions were predominantly composed of fucose and xylose. AFC-1 exhibited a higher sulfate content of 27.8% compared to AFC-2 with 17.0%. AFC-2 was primarily sulfated at the hydroxy group of C2, whereas AFC-1 was sulfated at both the hydroxy groups of C2 and C4. To evaluate the anti-hyperlipidemic effect, a hyperlipidemia mouse model was established by feeding mice a high-fat diet. The effects of AFC-1, AFC-2, and the crude extract were investigated, with the drug atorvastatin used as a positive comparison. Among the different fucoidan fractions and doses, the high dose of AFC-2 administration demonstrated the most significant anti-hyperlipidemic effect across various aspects, including physiological parameters, blood glucose levels, lipid profile, histological analysis, and the activities of oxidative stress-related enzymes and lipoprotein-metabolism-related enzymes (p < 0.05 for the final body weight and p < 0.01 for the rest indicators, compared with the model group), and its effect is comparable to the atorvastatin administration. Furthermore, fucoidan administration resulted in a lower degree of loss in gut flora diversity compared to atorvastatin administration. These findings highlight the significant biomedical potential of fucoidans derived from A. nodosum as a promising therapeutic solution for hypolipidemia.

Pd-doped HKUST-1 MOFs for enhanced hydrogen storage: effect of hydrogen spillover.

Extensive research has been devoted to developing metal nanoparticle (NP) doped porous materials with large hydrogen storage capacity and high hydrogen release pressure at ambient temperature. The ultra-sound assisted double-solvent approach (DSA) was applied for sample synthesis. In this study, tiny Pd NPs are confined into the pore space of HKUST-1, affording Pd@HKUST-1-DS with minimizing the aggregation of Pd NPs and subsequently the formation of Pd NPs on the external surface of HKUST-1. The experimental data reveal that the obtained Pd NP doped Pd@HKUST-1-DS possessed an outstanding hydrogen storage capacity of 3.68 wt% (and 1.63 wt%) at 77 K and 0.2 MPa H2 (and 298 K and 18 MPa H2), in comparison with pristine HKUST-1 and impregnated Pd/HKUST-1-IM. It is found that the storage capacity variation is not only ascribed to the different textural properties of materials but is also illustrated by the hydrogen spillover induced by different electron transport from Pd to the pores of MOFs (Pd@HKUST-1-DS > Pd/HKUST-1-IM), based on X-ray photoelectron spectroscopy and temperature desorption spectra. Pd@HKUST-1-DS, featuring high specific surface area, uniform Pd NP dispersion and strong interaction of Pd with hydrogen in the confined pore spaces of the support, displays the high hydrogen storage capacity. This work highlights the influence of spillover caused by Pd electron transport on the hydrogen storage capacity of metal NPs/MOFs, which is governed by both physical and chemical adsorption.

An Ultrasound-Fenton Process for the Degradation of 2,4,6-Trinitrotoluene.

2,4,6-Trinitrotoluene (TNT), one of the main compounds in ammunition wastewater, is harmful to the environment. In this study, the treatment efficiency of 2,4,6-TNT by different treatment processes, including ferrous ion (Fe2+), hydrogen peroxide (H2O2), Fenton, ultrasound (US) irradiation, US + Fe2+, US + H2O2 and US-Fenton process, was compared. The results showed that US-Fenton was the most effective among all methods studied. The effects of initial pH, reaction time and H2O2 to Fe2+ molar ratio were investigated. The results showed that the removal of TNT, TOC and COD was maximum at an initial pH of 3.0 and H2O2 to Fe2+ molar ratio of 10:1. TNT, TOC and COD removal was fast in the first 30 min, reaching 83%, 57% and 50%, then increased gradually to 99%, 67% and 87% until 300 min, respectively. Semi-batch mode operation increased the removal of TNT and TOC by approximately 5% and 10% at 60 min, respectively. The average carbon oxidation number (ACON) was increased from -1.7 at 30 min to a steady-state value of 0.4, indicating the mineralization of TNT. Based on GC-MS analysis, 1,3,5-trinitrobenzene, 2,4,6-trinitrobenzene acid, 3,5-dinitrobenznamine and 3,5-dinitro-p-toluidine were the major byproducts from the US-Fenton process. The TNT degradation pathway was proposed, which involved methyl group oxidation, decarboxylation, aromatic ring cleavage and hydrolysis.

Facilitated catalytic ozonation of atrazine over highly stabilized Zn-Al layered double oxides composites: efficacy and mechanism.

A series of Zn-Al Layered Double Oxides (ZnAl-LDO) composites were prepared by the hydrothermal and calcination method via employing the Zn-Al Layered Double Hydroxide (ZnAl-LDH) as the precursors in the present study. The structural properties and the catalytic ozonation activity of ZnrAl-T composites synthesized with different Zn/Al molar ratios and calcination temperatures were systematically investigated. Diversified characterizations were applied to analyze the phase structure and chemical composition of ZnrAl-T composites. As the calcination temperature increased, the layered ZnAl-LDH structure could be entirely destroyed and the crystallinity gradually improved. With the Zn/Al mole ratio of 4.0 and calcination temperature of 500°C, the Zn4Al-500 composite obtained the outstanding catalytic ozonation performance for atrazine (ATZ) degradation with the pseudo-first-order constant of 0.5080 min-1, which was 5 times more than that in O3 alone. Meanwhile, the ATZ degradation efficiency was gradually enhanced from 44.1% to 99.9% within 3.0 min when the solution pH ranged from 3.0 to 10.0. Besides, the Zn4Al-500 composite exhibited splendid stability over multiple reaction cycles. In addition, the radical scavenging test and electron spin resonance measurement demonstrated that superoxide radical and hydroxyl radical are the dominant reactive species in O3/Zn4Al-500 process. Moreover, nineteen and ten transformation products were detected in O3 alone and O3/Zn4Al-500 process, and possible degradation pathways of ATZ were further elucidated. Overall, the Zn4Al-500 composite would provide a potential alternative for pollutants removal due to its high catalytic ozonation efficiency, stability, and reusability.

Integrative Multi-Omics Analysis of Identified NUF2 as a Candidate Oncogene Correlates With Poor Prognosis and Immune Infiltration in Non-Small Cell Lung Cancer.

BACKGROUND: Lung cancer is one of the most common malignant tumors and the leading causes of cancer-related deaths worldwide. As a component of the nuclear division cycle 80 complex, NUF2 is a part of the conserved protein complex related to the centromere. Although the high expression of NUF2 has been reported in many different types of human cancers, the multi-omics analysis in non-small cell lung cancer (NSCLC) of NUF2 remains to be elucidated. METHODS: In this analysis, NUF2 expression difference analysis in non-small cell lung cancer was evaluated by Oncomine, TIMER, GEO, and TCGA database. And the prognosis analysis of NUF2 based on Kaplan-Meier was performed. R language was used to analyze the differential expression genes, functional annotation and protein-protein interaction (PPI). GSEA analysis of differential expression genes was also carried out. Mechanism analysis about exploring the characteristic of NUF2, multi-omics, and correlation analysis was carried out using UALCAN, cBioportal, GEPIA, TIMER, and TISIDB, respectively. RESULTS: The expression of NUF2 in NSCLC, both lung adenocarcinoma (LUAD) and squamous lung cancer (LUSC), was significantly higher than that in normal tissues. The analysis of UALCAN database samples proved that NUF2 expression was connected with stage and smoking habits. Meanwhile, the overall survival curve also validated that high expression of NUF2 has a poorer prognosis in NSCLC. GO, KEGG, GSEA, subcellular location from COMPARTMENTS indicated that NUF2 may regulate the cell cycle. Correlation analysis also showed that NUF2 was mainly positively associated with cell cycle and tumor-related genes. NUF2 altered group had a poorer prognosis than unaltered group in NSCLC. Immune infiltration analysis showed that the NUF2 expression mainly have negatively correlation with immune cells and immune subtypes in LUAD and LUSC. Furthermore, quantitative PCR was used to validate the expression difference of NUF2 in LUAD and LUSC. CONCLUSION: Our findings elucidated that NUF2 may play an important role in cell cycle, and significantly associated with tumor-related gene in NSCLC; we consider that NUF2 may be a prognostic biomarkers in NSCLC.

In Situ Nucleic Acid Amplification and Ultrasensitive Colorimetric Readout in a Paper-Based Analytical Device Using Silver Nanoplates.

A rapid, highly sensitive, and quantitative colorimetric paper-based analytical device (PAD) based on silver nanoplates (AgNPls) and loop-mediated isothermal amplification (LAMP) is presented. It is shown that cauliflower-like concatemer LAMP products can mediate crystal etching of AgNPls, with a threefold signal enhancement versus linear dsDNA. Methicillin-resistant Staphylococcus aureus (MRSA), an antimicrobial resistant bacterium that poses a formidable risk with persistently high mortality, is used as a model pathogen. Due to the excellent color contrast provided by AgNPls, the PAD allows qualitative analysis by the naked eye and quantitative analysis using a smartphone camera, with detection limits down to a single copy in just 30 min, and a linear response from 1 to 104 copies (R2 = 0.994). The entire assay runs in situ on the paper surface, which drastically simplifies operation of the device. This is the first demonstration of single copy detection using a colorimetric readout, and the developed PAD shows great promise for translation into an ultrasensitive gene-based point-of-care test for any infectious disease target, via modification of the LAMP primer set.

Laminar Flow-Based Fiber Fabrication and Encoding via Two-Photon Lithography.

In recent years, flow photolithography (FL) has emerged as a powerful synthetic tool for the creation of barcoded microparticles with complex morphologies and chemical compositions which have been shown to be useful in a range of multiplexed bioassay applications. More specifically, FL has been highly successful in producing micron-sized, encoded particles of bespoke shape, size, and color. That said, to date, FL has been restricted to generating barcoded microparticles and has lacked the ability to produce hybrid fibers which are structurally and spectrally encoded. To this end, we herein present a method that combines a continuous flow microfluidic system with two-photon polymerization (2PP) to fabricate microscale-encoded fibers and Janus strips in a high-throughput manner. Specifically, two co-flow liquid streams containing a monomer and initiator are introduced through a Y-shape channel to form a stable interface in the center of a microfluidic channel. The flow containing the (fluorescently labeled) monomer is then patterned by scanning the voxel of the 2PP laser across the interface to selectively polymerize different regions of the forming fiber/particle. Such a process allows for rapid spectral encoding at the single fiber level, with the resulting structurally coded fibers having obvious application in the fields of security identification and anticounterfeiting.

Long-armed hexapod nanocrystals of cesium lead bromide.

Colloidal lead halide perovskite nanocrystals (LHP NCs) assume a variety of morphologies (e.g. cubes, sheets, and wires). Their labile structural and surface characters allow them to undergo post-synthetic evolution of shape and crystallographic characters. Such transformations can be advantageous or deleterious, and it is therefore vital to both understand and exert control over these processes. In this study, we report novel long-armed hexapod structures of cesium lead bromide nanocrystals. These branched structures evolve from quantum-confined CsPbBr3 nanosheets to Cs4PbBr6 hexapods over a period of 24 hours. Time-resolved optical and structural characterization reveals a post-synthesis mechanism of phase transformation, oriented attachment and branch elongation. More generally, the study reveals important processes associated with LHP NC aging and demonstrates the utility of slow reaction kinetics in obtaining complex morphologies.

Asymmetric current-driven switching of synthetic antiferromagnets with Pt insert layers.

A perpendicularly magnetized synthetic antiferromagnetic structure is a promising alternative to a single ferromagnetic layer in spintronic applications because of its low net magnetization and high thermal stability. In this work, the ferromagnetic layers in the synthetic antiferromagnetic structure are simplified to 'soft' Co70Fe30 layers with the aid of ultrathin Pt insert layers between the ferromagnetic layers and the exchange coupling Ru layer to lower the energy consumption. In the current-driven manipulation of the magnetization, asymmetric switching loops are observed, which originate from the edge domain walls induced by the growth of the electrode pads. The edge domain walls preserved beneath the electrode pad help the switching process skipping the nucleation stage, lowering the critical current density to the order of 106 A cm-2. The present work broadens the choice of ferromagnetic layers for building an SAF structure and highlights a new way to utilize the synthetic antiferromagnetic structure as a building block in low-energy-consuming spintronic devices.

[Application of patient-controlled intravenous analgesia of dezocine combined with sufentanil in burn patients after surgery].

OBJECTIVE: To evaluate the efficacy and safety of patient-controlled intravenous analgesia (PCIA) of dezocine combined with sufentanil in burn patients after escharectomy or tangential excision followed by autologous skin grafting. METHODS: Sixty burn patients hospitalized in Department of Burns and Plastic Surgery of our hospital from February 2011 to December 2013, conforming to the study criteria and going to have escharectomy or tangential excision followed by autologous skin grafting, were divided into sufentanil group (S, n = 30) and dezocine+sufentanil group (DS, n = 30) according to the random number table. Patients in group S were given 150 mL normal saline containing 2.5 µg/kg sufentanil citrate and 6 mg tropisetron after skin grafting for 48 hours. Patients in group DS were given 150 mL normal saline containing 0.25 mg/kg dezocine, 1.5 µg/kg sufentanil citrate, and 6 mg tropisetron for 48 hours. Visual Analog Scale (VAS), Bruggrmann Comfort Scale (BCS), and Ramsay Sedation Scale were used to evaluate the sedative effect or analgesic effect, and their scores were recorded at administration hour (AH) 2, 6, 12, 24, and 48. The times of efficient injection and incidence of adverse effect within the 48 AH were recorded. Data were processed with analysis of variance for repeated measurement, t test, chi-square test, and Fisher's exact test. RESULTS: There were no obvious differences in the scores of VAS and BCS between two groups at each time point (with t values from -0.426 to 0.864, P values above 0.05). The scores of Ramsay Sedation Scale in group S at AH 2, 6, 12, 24, and 48 were respectively (3.2 ± 0.6), (3.2 ± 0.5), (3.3 ± 0.7), (3.2 ± 0.4), and (3.3 ± 0.4) points, which were higher than those in group DS [(2.4 ± 0.6), (2.5 ± 0.5), (2.4 ± 0.6), (2.4 ± 0.4), and (2.4 ± 0.5) points, with t values from 5.302 to 8.391, P values below 0.001]. The times of efficient injection within the 48 AH was 6.8 ± 0.7 in group S and 6.5 ± 0.9 in group DS, showing no significantly statistical difference (t = 1.260, P > 0.05). Respiratory depression was not observed in both groups; the incidence of pruritus was the same, and that of urine retention was similar between the 2 groups within the 48 AH (with P values above 0.05). Within the 48 AH, the incidence of nausea and vomiting in group S was 26.7% (8/30), which was obviously higher than that in group DS (6.7%, 2/30, P < 0.05); the incidence of drowsiness in group S was 20.0% (6/30), which was significantly higher than that in group DS (no patient, P < 0.05). CONCLUSIONS: Dezocine combined with sufentanil can provide effective postoperative analgesia with little adverse effect for PCIA in burn patients after escharectomy or tangential excision followed by autologous skin grafting, therefore it can be widely used.

Fabrication of polypyrrole/graphene oxide composite nanosheets and their applications for Cr(VI) removal in aqueous solution.

In this paper, we report on the simple, reliable synthesis of polypyrrole (PPy)/graphene oxide (GO) composite nanosheets by using sacrificial-template polymerization method. Herein, MnO(2) nanoslices were chosen as a sacrificial-template to deposit PPy, which served as the oxidant as well. During the polymerization of pyrrole on surface of GO nanosheets, MnO(2) component was consumed incessantly. As a result, the PPy growing on the surface of GO nanosheets has the morphology just like the MnO(2) nanoslices. This method can provide the fabrication of PPy nanostructures more easily than conventional route due to its independence of removing template, which usually is a complex and tedious experimental process. The as-prepared PPy/GO composite nanosheets exhibited an enhanced properties for Cr(VI) ions removal in aqueous solution based on the synergy effect. The adsorption capacity of the PPy/GO composite nanosheets is about two times as large as that of conventional PPy nanoparticles. We believe that our findings can open a new and effective avenue to improve the adsorption performance in removing heavy metal ions from waste water.

Preparation of bamboo-like PPy nanotubes and their application for removal of Cr(VI) ions in aqueous solution.

A reactive-template vapor phase polymerization method for the preparation of bamboo-like polypyrrole (PPy) nanotubes has been successfully demonstrated in this paper. Herein, electrospun V(2)O(5) nanofibers were chosen as templates to deposit PPy, which served as the oxidants as well. This method can provide the fabrication of PPy nanostructures more easily than conventional routes due to its independence of removing template, which is usually a complex and tedious experimental process. The application of bamboo-like PPy nanotubes for Cr(VI) ions removal in aqueous solution has been explored. The resulting bamboo-like PPy nanotubes exhibited much higher adsorption performance than traditional PPy nanoparticles.