RESUMEN
Owing to low cost and high efficiency, nonprecious metal catalysts have been widely used in various types of fuel cells. To obtain a high-activity electrocatalyst, a simple method for the synthesis of iron-modified covalent triazine frameworks by the direct heating of a mixture of FeCl3, ZnCl2, ZnO, and m-phthalodinitrile is reported. The role and a possible evolution pathway of the oxygen of metallic oxides are well discussed. To further verify our assumption, the Fe3O4 microspherical nanomaterials were synthesized and the relative Fe-based catalyst (Fe-NX/C) was successfully obtained by the ionothermal polymerization method. Fe-NX/C exhibits an extraordinary oxygen reduction reaction (ORR) performance in acidic solution, with a half-wave potential of only 25 mV negative shifts compared with Pt/C, while the power density is approximately 56% of that of Pt/C catalysts under the proton exchange membrane fuel cell testing condition. This work represents a new strategy to synthesize high-performance Fe-based catalysts toward ORR.
RESUMEN
Green and environment-friendly high-efficiency flame retardants (FRs) are crucial to polymer FR modification. Here, a green FR 2-((bis(2-hydroxyethyl)amino)methyl)-5,5-dimethyl-1,3,2-dioxaphosphinane 2-oxide (HAMPP) was synthesized. The HAMPP was incorporated with a cyclic phosphorus structure, which will readily carbonize to inhibit or prevent further combustion. Moreover, the HAMPP contains dihydroxy reactive groups that can be used as a monomer in the polymerization reaction to obtain the main chain containing phosphorus polymer. Research studies on FRs were based on flexible polyurethane foam (PU-HAMPPs). The limiting oxygen index value of PU foam with 10% HAMPP could reach 23.7%, passing a UL-94 V-0 rating together. With the addition of HAMPP, the peak heat release rate of PU foam decreased significantly, the decomposition temperature increased, the heat release capacity reduced by 31%, and the char yield increased by 42%. The chemical composition and morphology of the char residual have been studied and analyzed thoroughly. We find that HAMPP forms a molten viscous protective layer uniformly on the material surface and releases some incombustible gases. These indicated that the FR exploited both condensed-phase and gas-phase flame retardancy mechanisms. Besides, the addition of FRs improved the mechanical properties.
RESUMEN
Hierarchical iron-nitrogen-codoped porous hollow carbon spheres have been synthesized by using melamine-formaldehyde (MF) resin spheres as templates, nitrogen sources and pore-forming agents. FeCl3, 1,10-phenanthroline and carbon black were used as iron, nitrogen and carbon sources. The as-obtained porous hollow carbon spheres possess a high specific surface area of 807 m2 g-1, as well as exhibited excellent electrocatalytic activity for the oxygen reduction reaction (ORR) in both acidic and alkaline media. In 0.1 M HClO4 solution, the onset potential was 0.857 V (vs. RHE) and the half-wave potential was 0.715 V, which are only 78 and 80 mV less than those of the 20% Pt/C catalyst, respectively. In addition, in 0.1 M KOH solution, the onset potential was 1.017 V and the half-wave potential was 0.871 V for the ORR, which are 22 and 28 mV more positive than those of the Pt/C catalyst, respectively. Meanwhile, the catalyst also exhibited excellent methanol tolerance and long-term durability with a more effective four-electron pathway compared to the 20% Pt/C catalyst in both acidic and alkaline media. When used as an air-cathode catalyst for a Zn-air battery, the maximum power density of a Zn-air battery with the MF-C-Fe-Phen-800 cathode was 235 mW cm-2 at a high current density of 371 mA cm-2, and a high open-circuit potential of 1.654 V, superior to that of Pt/C (199 mW cm-2, 300 mA cm-2, 1.457 V). A series of designed experiments suggested that the remarkable performance was attributed to the high specific area, hollow carbon spheres, unique hierarchical micro-mesoporous structures, high contents of pyridinic-N and graphitic-N. The superiority of the as-prepared catalyst makes it promising for use in practical applications.
RESUMEN
Highly conductive anion exchange membranes (AEMs), along with the ability to suppress swelling, are critical but challenging requirements for alkaline fuel cell applications. To achieve this criterion, a series of poly(ether sulfone)s (PESFs) with flexible alkyl imidazolium pendants attached directly on large planar 6,12-bis(4-hydroxyphenyl)-5,11-dihydroindolo[3,2-b]carbazole (DCP) units is reported. The planar DCP units stabilize the hydrophobic phase through strong π-π interactions and also facilitate the formation of ionic conducting channels through self assembly of hydrophilic pendants. The AEM prepared here, based on rational design, has a relatively low ion exchange capacity (IEC) of 1.86 × 10-3 mol g-1 and exhibits high hydroxide ion (OH- ) conductivity of 101 × 10-3 S cm-1 , a low swelling ratio of 9.3% and a water uptake of 39.6%. Furthermore, the AEMs reported in this paper have excellent stability in 1 m NaOH solution at 80 °C over 500 h. Therefore, the synthesized polymers offer a new insight into the design of high performance materials for AEMs.
Asunto(s)
Álcalis/química , Carbazoles/química , Suministros de Energía Eléctrica , Polímeros/química , Sulfonas/química , Tamaño de la Partícula , Polímeros/síntesis química , Sulfonas/síntesis química , Propiedades de SuperficieRESUMEN
Nitrogen-doped graphitic porous carbons (NGPCs) have been synthesized by using a zeolite-type nanoscale metal-organic framework (NMOF) as a self-sacrificing template, which simultaneously acts as both the carbon and nitrogen sources in a facile carbonization process. The NGPCs not only retain the nanopolyhedral morphology of the parent NMOF, but also possess rich nitrogen, high surface area and hierarchical porosity with well-conducting networks. The promising potential of NGPCs as metal-free electrocatalysts for oxygen reduction reactions (ORR) in fuel cells is demonstrated. Compared with commercial Pt/C, the optimized NGPC-1000-10 (carbonized at 1000 °C for 10 h) catalyst exhibits comparable electrocatalytic activity via an efficient four-electron-dominant ORR process coupled with superior methanol tolerance as well as cycling stability in alkaline media. Furthermore, the controlled experiments reveal that the optimum activity of NGPC-1000-10 can be attributed to the synergetic contributions of the abundant active sites with high graphitic-N portion, high surface area and porosity, and the high degree of graphitization. Our findings suggest that solely MOF-derived heteroatom-doped carbon materials can be a promising alternative for Pt-based catalysts in fuel cells.
RESUMEN
In the present work, we have designed and synthesized a new highly durable iron phtalocyanine based nonprecious oxygen reduction reaction (ORR) catalyst (Fe-SPc) for polymer electrolyte membrane fuel cells (PEMFCs). The Fe-SPc, with a novel structure inspired by that of naturally occurring oxygen activation catalysts, is prepared by a nonpyrolyzing method, allowing adequate control of the atomic structure and surface properties of the material. Significantly improved ORR stability of the Fe-SPc is observed compared with the commercial Fe-Pc catalysts. The Fe-SPc has similar activity to that of the commercial Fe-Pc initially, while the Fe-SPc displays 4.6 times higher current density than that of the commercial Fe-Pc after 10 sweep potential cycles, and a current density that is 7.4 times higher after 100 cycles. This has been attributed to the incorporation of electron-donating functional groups, along with a high degree of steric hindrance maintaining active site isolation. Nonprecious Fe-SPc is promising as a potential alternative ORR electrocatalyst for PEMFCs.