Cotton Bollworm (H. armigera) Effector PPI5 Targets FKBP17-2 to Inhibit ER Immunity and JA/SA Responses, Enhancing Insect Feeding.

The cotton bollworm causes severe mechanical damage to plants during feeding and leaves oral secretions (OSs) at the mechanical wounds. The role these OSs play in the invasion of plants is still largely unknown. Here, a novel H. armigera effector peptidyl prolyl trans-isomerase 5 (PPI5) was isolated and characterized. PPI5 induces the programmed cell death (PCD) due to the unfolded protein response (UPR) in tobacco leaf. We reveal that PPI5 is important for the growth and development of cotton bollworm on plants, as it renders plants more susceptible to feeding. The GhFKBP17-2, was identified as a host target for PPI5 with peptidyl-prolyl isomerase (PPIase) activity. CRISPR/Cas9 knock-out cotton mutant (CR-GhFKBP17-1/3), VIGS (TRV: GhFKBP17-2) and overexpression lines (OE-GhFKBP17-1/3) were created and the data indicate that GhFKBP17-2 positively regulates endoplasmic reticulum (ER) stress-mediated plant immunity in response to cotton bollworm infestation. We further confirm that PPI5 represses JA and SA levels by downregulating the expression of JA- and SA-associated genes, including JAZ3/9, MYC2/3, JAR4, PR4, LSD1, PAD4, ICS1 and PR1/5. Taken together, our results reveal that PPI5 reduces plant defense responses and makes plants more susceptible to cotton bollworm infection by targeting and suppressing GhFKBP17-2 -mediated plant immunity.

Evolution and driving factors of inequality in CO2 emissions from agricultural energy consumption in China.

The inequality in CO2 emissions from agricultural energy consumption is a major challenge for coordinating low-carbon agricultural development across regions in China. However, the evolutionary characteristics and driving factors of inequality in China's agricultural energy-related CO2 emissions are poorly understood. In response, the Kaya-Theil model was adopted to examine the three potential factors influencing CO2 emission inequality in China's agricultural energy consumption. The results revealed that, from 1997 to 2021, agricultural energy-related CO2 emissions per capita showed a significant upward trend, with prominent polarization and right-tailing phenomena. Overall, the inequality was on a downward trend, with the Theil index falling from 0.4109 in 1997 to 0.1957 in 2021. Meanwhile, the decomposition of the national inequality revealed that the within-group inequality declined from 0.3991 to 0.1634, which was greater than between-group inequality, based on zoning the 28 provinces into three grain production functional areas. As for the three kaya factors, the energy intensity contributed the most to the overall inequality, followed by the agricultural economic development and CO2 emission intensity. Based on these results, this study provided some potential strategies to reduce agricultural-related CO2 emissions.

Polymorphic microstructure of MDI/BD-block polyurethane as determined by temperature-sensitive conformation variation.

MDI/BD-block thermoplastic polyurethanes (TPUs) crystallized at different isothermal temperatures and different cooling rates were investigated using multiple techniques. The MDI/BD blocks crystallized in form II when the isothermal temperature was equal to or higher than 150 °C, and in form I at lower isothermal temperatures. Form II had a higher crystal elastic modulus of 6.75 GPa than form I of 1.31 GPa. Form I exhibited contracted conformation, while form II exhibited an extended conformation when viewed from the length of the c-axis in the crystalline state. Based on an analysis of the second derivative in FTIR spectroscopy and simple modeling, the conformation differences were considered to stem from the urethane group's internal bond rotation concerning the phenyl ring and the opening bond angle of phenyl-CH2-phenyl. The generation of form II above 150 °C may be due to the activation of urethane and the flexible methylene elevated by the high temperature. Overall, it was seen that the crystallization of MDI/BD blocks involved a physicochemical change.

Multiscale Assembly of [AgS4 ] Tetrahedrons into Hierarchical Ag-S Networks for Robust Photonic Water.

There is an urgent need to assemble ultrasmall metal chalcogenides (with atomic precision) into functional materials with the required anisotropy and uniformity, on a micro- or even macroscale. Here, a delicate yet simple chemistry is developed to produce a silver-sulfur network microplate with a high monodispersity in size and morphology. Spanning from the atomic, molecular, to nanometer, to micrometer scale, the key structural evolution of the obtained microplates includes 2D confinement growth, edge-sharing growth mode, and thermodynamically driven layer-by-layer stacking, all of which are derived from the [AgS4 ] tetrahedron unit. The key to such a high hierarchical, complex, and accurate assembly is the dense deprotonated ligand layer on the surface of the microplates, forming an infinite surface with high negative charge density. This feature operates at an orderly distance to allow further hierarchical self-assembly on the microscale to generate columnar assemblies composed of microplate components, thereby endowing the feature of the 1D photonic reflector to water (i.e., photonic water). The reflective color of the resulting photonic water is highly dependent on the thickness of the building blocks (i.e., silver-sulfur microplates), and the coexistent order and fluidity help to form robust photonic water.

[Resistance risk, cross-resistance and biochemical resistance mechanism of Laodelphax striatellus to buprofezin].

In order to investigate the resistance development law and biochemical resistance mechanism of Laodelphax striatellus to buprofezin, spraying rice seedlings was used to continuously screen resistant strains of L. striatellus and dipping rice seedlings was applied to determine the toxicity and cross-resistance of L. striatellus to insecticides. After 32-generation screening with buprofezin, L. striatellus developed 168.49 folds resistance and its reality heritability (h2) was 0.11. If the killing rate was 80%-90%, L. striatellus was expected to develop 10-fold resistance to buprofezin only after 5 to 6 generations breeding. Because the actual reality heritability of field populations was usually lower than that of the resistant strains, the production of field populations increasing with 10-fold resistance would need much longer time. The results of cross-resistance showed that resistant strain had high level cross-resistance with thiamethoxam and imidacloprid, low level cross-resistance with acetamiprid, and no cross-resistance with pymetrozine and chlorpyrifos. The activity of detoxification enzymes of different strains and the syergism of synergist were measured. The results showed that cytochrome P450 monooxygenase played a major role in the resistance of L. striatellus to buprofezin, the esterase played a minor role and the GSH-S-transferase had no effect. Therefore, L. striatellus would have high risk to develop resistance to buprofezin when used in the field and might be delayed by using pymetrozine and chlorpyrifos.

Studying nanostructure gradients in injection-molded polypropylene/montmorillonite composites by microbeam small-angle x-ray scattering.

The core-shell structure in oriented cylindrical rods of polypropylene (PP) and nanoclay composites (NCs) from PP and montmorillonite (MMT) is studied by microbeam small-angle x-ray scattering (SAXS). The structure of neat PP is almost homogeneous across the rod showing regular semicrystalline stacks. In the NCs the discrete SAXS of arranged crystalline PP domains is limited to a skin zone of 300 µm thickness. Even there only frozen-in primary lamellae are detected. The core of the NCs is dominated by diffuse scattering from crystalline domains placed at random. The SAXS of the MMT flakes exhibits a complex skin-core gradient. Both the direction of the symmetry axis and the apparent perfection of flake-orientation are varying. Thus there is no local fiber symmetry, and the structure gradient cannot be reconstructed from a scan across the full rod. To overcome the problem the rods are machined. Scans across the residual webs are performed. For the first time webs have been carved out in two principal directions. Comparison of the corresponding two sets of SAXS patterns demonstrates the complexity of the MMT orientation. Close to the surface (< 1 mm) the flakes cling to the wall. The variation of the orientation distribution widths indicates the presence of both MMT flakes and grains. The grains have not been oriented in the flowing melt. An empirical equation is presented which describes the variation from skin to core of one component of the inclination angle of flake-shaped phyllosilicate filler particles.