Multi-omics analysis of human tendon adhesion reveals that ACKR1-regulated macrophage migration is involved in regeneration.

Tendon adhesion is a common complication after tendon injury with the development of accumulated fibrotic tissues without effective anti-fibrotic therapies, resulting in severe disability. Macrophages are widely recognized as a fibrotic trigger during peritendinous adhesion formation. However, different clusters of macrophages have various functions and receive multiple regulation, which are both still unknown. In our current study, multi-omics analysis including single-cell RNA sequencing and proteomics was performed on both human and mouse tendon adhesion tissue at different stages after tendon injury. The transcriptomes of over 74 000 human single cells were profiled. As results, we found that SPP1+ macrophages, RGCC+ endothelial cells, ACKR1+ endothelial cells and ADAM12+ fibroblasts participated in tendon adhesion formation. Interestingly, despite specific fibrotic clusters in tendon adhesion, FOLR2+ macrophages were identified as an antifibrotic cluster by in vitro experiments using human cells. Furthermore, ACKR1 was verified to regulate FOLR2+ macrophages migration at the injured peritendinous site by transplantation of bone marrow from Lysm-Cre;R26RtdTomato mice to lethally irradiated Ackr1-/- mice (Ackr1-/- chimeras; deficient in ACKR1) and control mice (WT chimeras). Compared with WT chimeras, the decline of FOLR2+ macrophages was also observed, indicating that ACKR1 was specifically involved in FOLR2+ macrophages migration. Taken together, our study not only characterized the fibrosis microenvironment landscape of tendon adhesion by multi-omics analysis, but also uncovered a novel antifibrotic cluster of macrophages and their origin. These results provide potential therapeutic targets against human tendon adhesion.

High-strength, anti-fatigue, cellulose nanofiber reinforced polyvinyl alcohol based ionic conductive hydrogels for flexible strain/pressure sensors and triboelectric nanogenerators.

Ionic conductive hydrogels (ICHs) have attracted great attention because of their excellent biocompatibility and structural similarity with biological tissues. However, it is still a huge challenge to prepare a high strength, conductivity and durability hydrogel-based flexible sensor with dual network structure through a simple and environmentally friendly method. In this work, a simple one-pot cycle freezing thawing method was proposed to prepare ICHs by dissolving polyvinyl alcohol (PVA) and ferric chloride (FeCl3) in cellulose nanofiber (CNF) aqueous dispersion. A dual cross-linked network was established in hydrogel through the hydrogen bonds and coordination bonds among PVA, CNF, and FeCl3. This structure endows the as-prepared hydrogel with high sensitivity (pressure sensitivity coefficient (S) = 5.326 in the pressure range of 0-5 kPa), wide response range (4511 kPa), excellent durability (over 3000 cycles), short response time (83 ms) and recovery time (117 ms), which can accurately detect various human activities in real time. Furthermore, the triboelectric nano-generator (TENG) made from PVA@CNF-FeCl3 hydrogel can not only supply power for commercial capacitors and LED lamps, but also be used as a self-powered sensor to detect human motion. This work provides a new approach for the development of the next generation of flexible wearable electronic devices.

Genomic analyses reveal the stepwise domestication and genetic mechanism of curd biogenesis in cauliflower.

Cauliflower (Brassica oleracea L. var. botrytis) is a distinctive vegetable that supplies a nutrient-rich edible inflorescence meristem for the human diet. However, the genomic bases of its selective breeding have not been studied extensively. Herein, we present a high-quality reference genome assembly C-8 (V2) and a comprehensive genomic variation map consisting of 971 diverse accessions of cauliflower and its relatives. Genomic selection analysis and deep-mined divergences were used to explore a stepwise domestication process for cauliflower that initially evolved from broccoli (Curd-emergence and Curd-improvement), revealing that three MADS-box genes, CAULIFLOWER1 (CAL1), CAL2 and FRUITFULL (FUL2), could have essential roles during curd formation. Genome-wide association studies identified nine loci significantly associated with morphological and biological characters and demonstrated that a zinc-finger protein (BOB06G135460) positively regulates stem height in cauliflower. This study offers valuable genomic resources for better understanding the genetic bases of curd biogenesis and florescent development in crops.

Use of a pH-responsive imatinib mesylate sustained-release hydrogel for the treatment of tendon adhesion by inhibiting PDGFRß/CLDN1 pathway.

Adhesion after tendon injury, which can result in limb movement disorders, is a common clinical complication; however, effective treatment methods are lacking. Hyaluronic acid hydrogels are a new biomedical material used to prevent tendon adhesion owing to their good biocompatibility. In addition, potential drugs that inhibit adhesion formation have gradually been discovered. The anti-adhesion effects of a combination of loaded drugs into hydrogels have become an emerging trend. However, current drug delivery systems usually lack specific regulation of drug release, and the effectiveness of drugs for treating tendon adhesions is mostly flawed. In this study, we identified a new drug, imatinib mesylate (IM), that prevents tendon adhesion and explored its related molecular pathways. In addition, we designed a pH-responsive sustained-release hydrogel for delivery. Using the metal-organic framework ZIF-8 as a drug carrier, we achieved controlled drug release to increase the effective drug dose at the peak of adhesion formation to achieve better therapeutic effects. The results showed that IM blocked the formation of peritendon adhesions by inhibiting the PDGFRß/ERK/STAT3/CLDN1 pathway. Furthermore, the hydrogel with ZIF-8 exhibited better physical properties and drug release curves than the hydrogel loaded only with drugs, showing better prevention and treatment effects on tendon adhesion.

Antiadhesion Biomaterials in Tendon Repair: Application Status and Future Prospect.

The healing process after tendon injury is often accompanied by the formation of peritendinous adhesion, contributing to limb dysfunction and exerting detrimental effects on the individuals, as well as the development of society and economy. With the continuous development of material science, as well as the augmented understanding of tendon healing and the mechanism of peritendinous adhesion formation, materials used for the fabrication of barrier membranes against peritendinous adhesion emerge endlessly. In this article, based on the analysis of the mechanism of adhesion formation, we first review the commonly used natural and synthetic materials, along with their corresponding fabrication strategies, in order to furnish valuable insights for the future optimization and development of antiperitendinous adhesion barrier membranes. This article also discusses the interaction between antiadhesion materials and cells for ameliorating peritendinous adhesion.

Experimental verification and rapid estimation of uncalibrated cable force via video-based and vibration-based measurements.

The stayed-cable is an important component of cable-stayed bridges, with cable force being a focal point during construction and bridge operation. The advancement of camera and image processing technology has facilitated the integration of computer vision technology in structural inspection and monitoring. This paper focuses on enhancing cable force measurement methods and addressing the limitations of traditional testing techniques by conducting experimental research on cable force estimation using video recording. The proposed approach involves capturing video footage of the target on the cable with a smartphone. Subsequently, a combination of techniques such as the background subtraction method, image morphology processing, and Hough transform image processing technology are employed to detect the precise center coordinates and ultimately obtain the accurate displacement-time curve of the cable's vibration. In addition, the graphic Circularity Coefficient (CC) has been introduced to assess its effectiveness in post-motion-blur image processing for circular targets. The fundamental frequency of the cable is determined by the fast Fourier transformation, and the relationship between the cable force and the fundamental frequency is used to estimate the cable force. The experimental results are compared with data from accelerometers and force gauges, demonstrating that the frequency measurement error is below 1.2% and the cable force test error is less than 3%. In the process of acquiring the cable's fundamental frequency, the test directly employs the pixel as the displacement unit, eliminating the need for image calibration. The innovative use of the CC in processing motion-blurred targets ensured accurate recognition of target coordinates. The experimental findings highlight the method's simplicity, speed, and accuracy.

In Situ Multicolor Imaging of Photocatalytic Degradation Process of Permanganate on Single Bismuth-Based Metal-Organic Frameworks.

Bismuth-based metal-organic frameworks (Bi-MOFs) have emerged as important photocatalysts for pollutant degradation applications. Understanding the photocatalytic degradation mechanism is key to achieving technological advantage. Herein, we apply dark-field optical microscopy (DFM) to realize in situ multicolor imaging of the photocatalytic degradation process of permanganate (MnO4-) on single CAU-17 Bi-MOFs. Three reaction kinetic processes such as surface adsorption, photocatalytic reduction, and disproportionation are revealed by combining the time-lapsed DFM images with optical absorption spectra, indicating that the photocatalytic reduction of purple MnO4- first produces beige red MnO42- through a one-electron pathway, and then MnO42- disproportionates into yellow MnO2 on CAU-17. Meanwhile, we observe that the deposition of MnO2 cocatalysts enhances the surface adsorption reaction and the photocatalytic reduction of MnO4- to MnO42-. Unexpectedly, it is found that isopropanol as a typical hole scavenger can stabilize MnO42-, avoiding disproportionation and causing the alteration of the photocatalytic reaction pathway from a one-electron avenue to a three-electron (1 + 2) process for producing MnO2 on CAU-17. This research opens up the possibility of comprehensively tracking and understanding the photocatalytic degradation reaction at the single MOF particle level.

Targeted Macrophage CRISPR-Cas13 mRNA Editing in Immunotherapy for Tendon Injury.

CRISPR-Cas13 holds substantial promise for tissue repair through its RNA editing capabilities and swift catabolism. However, conventional delivery methods fall short in addressing the heightened inflammatory response orchestrated by macrophages during the acute stages of tendon injury. In this investigation, macrophage-targeting cationic polymers are systematically screened to facilitate the entry of Cas13 ribonucleic-protein complex (Cas13 RNP) into macrophages. Notably, SPP1 (OPN encoding)-producing macrophages are recognized as a profibrotic subtype that emerges during the inflammatory stage. By employing ROS-responsive release mechanisms tailored for macrophage-targeted Cas13 RNP editing systems, the overactivation of SPP1 is curbed in the face of an acute immune microenvironment. Upon encapsulating this composite membrane around the tendon injury site, the macrophage-targeted Cas13 RNP effectively curtails the emergence of injury-induced SPP1-producing macrophages in the acute phase, leading to diminished fibroblast activation and mitigated peritendinous adhesion. Consequently, this study furnishes a swift RNA editing strategy for macrophages in the inflammatory phase triggered by ROS in tendon injury, along with a pioneering macrophage-targeted carrier proficient in delivering Cas13 into macrophages efficiently.

Compact angle-resolved metasurface spectrometer.

Light scattered or radiated from a material carries valuable information on the said material. Such information can be uncovered by measuring the light field at different angles and frequencies. However, this technique typically requires a large optical apparatus, hampering the widespread use of angle-resolved spectroscopy beyond the lab. Here we demonstrate compact angle-resolved spectral imaging by combining a tunable metasurface-based spectrometer array and a metalens. With this approach, even with a miniaturized spectrometer footprint of only 4 × 4 µm2, we demonstrate a wavelength accuracy of 0.17 nm, spectral resolution of 0.4 nm and a linear dynamic range of 149 dB. Moreover, our spectrometer has a detection limit of 1.2 fJ, and can be patterned to an array for spectral imaging. Placing such a spectrometer array directly at the back focal plane of a metalens, we achieve an angular resolution of 4.88 × 10-3 rad. Our angle-resolved spectrometers empowered by metalenses can be employed towards enhancing advanced optical imaging and spectral analysis applications.

DAT-MT Accelerated Graph Fusion Dependency Parsing Model for Small Samples in Professional Fields.

The rapid development of information technology has made the amount of information in massive texts far exceed human intuitive cognition, and dependency parsing can effectively deal with information overload. In the background of domain specialization, the migration and application of syntactic treebanks and the speed improvement in syntactic analysis models become the key to the efficiency of syntactic analysis. To realize domain migration of syntactic tree library and improve the speed of text parsing, this paper proposes a novel approach-the Double-Array Trie and Multi-threading (DAT-MT) accelerated graph fusion dependency parsing model. It effectively combines the specialized syntactic features from small-scale professional field corpus with the generalized syntactic features from large-scale news corpus, which improves the accuracy of syntactic relation recognition. Aiming at the problem of high space and time complexity brought by the graph fusion model, the DAT-MT method is proposed. It realizes the rapid mapping of massive Chinese character features to the model's prior parameters and the parallel processing of calculation, thereby improving the parsing speed. The experimental results show that the unlabeled attachment score (UAS) and the labeled attachment score (LAS) of the model are improved by 13.34% and 14.82% compared with the model with only the professional field corpus and improved by 3.14% and 3.40% compared with the model only with news corpus; both indicators are better than DDParser and LTP 4 methods based on deep learning. Additionally, the method in this paper achieves a speedup of about 3.7 times compared to the method with a red-black tree index and a single thread. Efficient and accurate syntactic analysis methods will benefit the real-time processing of massive texts in professional fields, such as multi-dimensional semantic correlation, professional feature extraction, and domain knowledge graph construction.

A platform for integrated spectrometers based on solution-processable semiconductors.

Acquiring real-time spectral information in point-of-care diagnosis, internet-of-thing, and other lab-on-chip applications require spectrometers with hetero-integration capability and miniaturized feature. Compared to conventional semiconductors integrated by heteroepitaxy, solution-processable semiconductors provide a much-flexible integration platform due to their solution-processability, and, therefore, more suitable for the multi-material integrated system. However, solution-processable semiconductors are usually incompatible with the micro-fabrication processes. This work proposes a facile and universal platform to fabricate integrated spectrometers with semiconductor substitutability by unprecedently involving the conjugated mode of the bound states in the continuum (conjugated-BIC) photonics. Specifically, exploiting the conjugated-BIC photonics, which remains unexplored in conventional lasing studies, renders the broadband photodiodes with ultra-narrowband detection ability, detection wavelength tunability, and on-chip integration ability while ensuring the device performance. Spectrometers based on these ultra-narrowband photodiode arrays exhibit high spectral resolution and wide/tunable spectral bandwidth. The fabrication processes are compatible with solution-processable semiconductors photodiodes like perovskites and quantum dots, which can be potentially extended to conventional semiconductors. Signals from the spectrometers directly constitute the incident spectra without being computation-intensive, latency-sensitive, and error-intolerant. As an example, the integrated spectrometers based on perovskite photodiodes are capable of realizing narrowband/broadband light reconstruction and in-situ hyperspectral imaging.

Inversion of spatio-temporal distribution heat flux and reconstruction of transient temperature field of three-layered skin tissue during hyperthermia.

Hyperthermia (for example, high-intensity focused ultrasound, laser, radio-frequency) of cancerous cells from in vitro to in vivo requires accurately obtaining the heat distribution induced by external heating into the three-layered skin tissue. Obtaining the boundary heat flux into the three-layered skin tissue is a necessary condition to realize the measurement of tissue heat distribution. Considering the complexity of multiple boundary heat fluxes in spatio-temporal distribution, this study proposes an inversion scheme to predict the spatio-temporal distribution of multiple boundary heat fluxes into the three-layered skin tissue. In the inversion scheme, a multivariable prediction model is established to solve the spatio-temporal coupling problem between the inversed boundary heat flux and measurement temperature information. Furthermore, based on the dependence between the predicted temperature and inversed boundary heat flux, the inversion system is constructed to realize the simultaneous optimization inversion of multiple boundary heat fluxes in spatio-temporal distribution. To examine the feasibility and effectiveness of inversion scheme, numerical experiments are carried out to discuss the influence of future time steps and measurement errors on the inversion results of boundary heat flux. In addition, the transient temperature field of three-layered skin tissue is reconstructed by inversed boundary heat flux, which could provide an economical, effective, and non-invasive solution for the measurement of thermal field of three-layered skin tissue during hyperthermia.

A Theragnostic HIFU Transducer and System for Inherently Registered Imaging and Therapy.

OBJECTIVE: One big challenge with high intensity focused ultrasound (HIFU) is the difficulty in accurate prediction of focal location due to the complex wave propagation in heterogeneous medium even with imaging guidance. This study aims to overcome this by combining therapy and imaging guidance with one single HIFU transducer using the vibro-acoustography (VA) strategy. METHODS: Based on the VA imaging method, a HIFU transducer consisting of 8 transmitting elements was proposed for therapy planning, treatment and evaluation. Inherent registration between the therapy and imaging created unique spatial consistence in HIFU transducer's focal region in the above three procedures. Performance of this imaging modality was first evaluated through in-vitro phantoms. In-vitro and ex-vivo experiments were then designed to demonstrate the proposed dual-mode system's ability in conducting accurate thermal ablation. RESULTS: Point spread function of the HIFU-converted imaging system had a full wave half maximum of about 1.2 mm in both directions at a transmitting frequency of 1.2 MHz, which outperformed the conventional ultrasound imaging (3.15 MHz) in in-vitro situation. Image contrast was also tested on the in-vitro phantom. Various geometric patterns could be accurately 'burned out' on the testing objects by the proposed system both in vitro and ex vivo. CONCLUSION: Implementation of imaging and therapy with one HIFU transducer in this manner is feasible and it has potential as a novel strategy for addressing the long-standing problem in the HIFU therapy, possibly pushing this non-invasive technique forward towards wider clinical applications.

Effect of pulse parameters on ablation efficiency in dual-frequency HIFU therapy.

High-intensity focused ultrasound (HIFU) has now been widely used to ablate various benign and malignant tumors. But it is still critical to increase the ablation efficiency in many clinical applications. Dual-frequency HIFU has been proven to be more efficient in ablation, but the principle on selecting the pulse parameters in this method remains to be explored. In this study, the in vitro lesion areas under different pulse repetition frequencies (PRFs), duty ratios, and frequency differences were compared, cavitation activity was also monitored during HIFU exposure. The results showed that different pulse parameters caused different types of lesions. In HIFU therapy, those pulse parameters that maximize the thermal effect, reduce heat dissipation and generate sufficient cavitation activities should be considered. But the method of evaluating or predicting the damage by using the cavitation dose is only applicable to mechanical damage.

Sustained Release of Dicumarol via Novel Grafted Polymer in Electrospun Nanofiber Membrane for Treatment of Peritendinous Adhesion.

The prevention and treatment of post-traumatic peritendinous adhesion (PA) have always been a great difficulty for orthopedic surgeons. Current treatments include resecting surgery, non-steroidal anti-inflammatory drugs (NSAIDs) usage and implantable membranes, often target single disease pathogenic processes, resulting in unfavorable therapeutic outcomes. Here a polylactic acid (PLA)-dicumarol conjugates-electrospun nanofiber membrane (ENM) (PCD) is generated, which can achieve spatial accuracy and temporal sustainability in drug release. It is further demonstrated that PCD possesses a significantly higher and more sustainable drug release profile than traditional drug-loading ENM. By providing a physical barrier and continuous releasing of dicumarol, PCD implantation significantly reduces tissue adhesion by 25%, decreases fibroblasts activity and inhibits key fibrogenic cytokine transforming growth factor beta (TGFß) production by 30%, and improves the biomechanical tendon property by 14.69%. Mechanistically, PCD potently inhibits the connexin43 (Cx43) and thereby tunes down the fibroblastic TGFß/Smad3 signaling pathway. Thus, this approach leverages the anti-adhesion effect of dicumarol and drug release properties of grafted copolymer ENM by esters to provide a promising therapeutic strategy for patients who suffer from PA.

Integrative genomic and transcriptomic analyses of a bud sport mutant 'Jinzao Wuhe' with the phenotype of large berries in grapevines.

Background: Bud sport mutation occurs frequently in fruit plants and acts as an important approach for grapevine improvement and breeding. 'Jinzao Wuhe' is a bud sport of the elite cultivar 'Himord Seedless' with obviously enlarged organs and berries. To date, the molecular mechanisms underlying berry enlargement caused by bud sport in grapevines remain unclear. Methods: Whole genome resequencing (WGRS) was performed for two pairs of bud sports and their maternal plants with similar phenotype to identify SNPs, InDels and structural variations (SVs) as well as related genes. Furthermore, transcriptomic sequencing at different developmental stages and weighted gene co-expression network analysis (WGCNA) for 'Jinzao Wuhe' and its maternal plant 'Himord Seedless' were carried out to identify the differentially expressed genes (DEGs), which were subsequently analyzed for Gene Ontology (GO) and function annotation. Results: In two pairs of enlarged berry bud sports, a total of 1,334 SNPs, 272 InDels and 74 SVs, corresponding to 1,022 target genes related to symbiotic microorganisms, cell death and other processes were identified. Meanwhile, 1,149 DEGs associated with cell wall modification, stress-response and cell killing might be responsible for the phenotypic variation were also determined. As a result, 42 DEGs between 'Himord Seedless' and 'Jinzao Wuhe' harboring genetic variations were further investigated, including pectin esterase, cellulase A, cytochromes P450 (CYP), UDP-glycosyltransferase (UGT), zinc finger protein, auxin response factor (ARF), NAC transcription factor (TF), protein kinase, etc. These candidate genes offer important clues for a better understanding of developmental regulations of berry enlargement in grapevine. Conclusion: Our results provide candidate genes and valuable information for dissecting the underlying mechanisms of berry development and contribute to future improvement of grapevine cultivars.

Distribution, source and behavior of rare earth elements in surface water and sediments in a subtropical freshwater lake influenced by human activities.

As tracers, rare earth elements (REEs) can reflect the influence of human activities on the environmental changes in aquatic systems. To reveal the geochemical behavior of REEs in a water-sediment system influenced by human activities, the contents of REEs in the surface water and sediment in the Chaohu Lake Basin were measured by inductively coupled plasma mass spectrometry (ICP-MS). The results show that the ΣREE contents in the surface water are 0.10-0.850 µg L-1, the ΣREE contents in the sediments are 71.14-210.01 µg g-1, and the average contents are 0.24 µg L-1 and 126.72 µg g-1, respectively. Almost all water and sediment samples have obvious light REE (LREE) enrichment, which is the result of the input of LREE-rich substances released by natural processes and human activities (industrial and agricultural production). Under the alkaline water quality conditions of Chaohu Lake, REEs (especially LREEs) are easily removed from water by adsorption/coprecipitation reactions with suspended colloidal particles, which leads to the enrichment of LREEs in sediments. The Ce anomaly of the water-sediment system is related to the oxidation environment, while the Eu anomaly is related to the plagioclase crystallization. Significant Gd anomalies was observed in the downstream of rivers flowing through urban areas, which was related to the anthropogenic Gd wastewater discharged by hospitals. The ∑REE-δEu and provenance index (PI) discrimination results are consistent, indicating that the sediments in Chaohu Lake mainly come from rivers flowing through the southwest farmland. Furthermore, the spatial distribution of REEs shows that these tributaries are significantly affected by agricultural activities. The distribution and accumulation of REEs in Chaohu Lake are the result of the interaction of natural and human processes. The results can provide a scientific reference for the distribution and environmental behavior of REEs in aquatic environments disturbed by human beings.

Serpentine-Inspired Strain Sensor with Predictable Cracks for Remote Bio-Mechanical Signal Monitoring.

Flexible strain sensors have attracted intense interest due to their application as intelligent wearable electronic devices. However, it is still a huge challenge to achieve a flexible sensor with simultaneous high sensitivity, excellent durability, and a wide sensing region. In this work, a crack-based strain sensor with a paired-serpentine conductive network is fabricated onto flexible film by screen printing. The innovative conductive network exhibits a controlled crack morphology during stretching, which endows the prepared sensor with outstanding sensing characteristics, including high sensitivity (gauge factor up to 2391.5), wide detection (rang up to 132%), low strain detection limit, a fast response time (about 40 ms), as well as excellent durability (more than 2000 stretching/releasing cycles). Benefiting from these excellent performances, full-range human body motions including subtle physiological signals and large motions are accurately detected by the prepared sensor. Furthermore, wearable electronic equipment integrated with a wireless transmitter and the prepared strain sensor shows great potential for remote motion monitoring and intelligent mobile diagnosis for humans. This work provides an effective strategy for the fabrication of novel strain sensors with highly comprehensive performance.

Combining hydrochemistry and hydrogen and oxygen stable isotopes to reveal the influence of human activities on surface water quality in Chaohu Lake Basin.

The input of pollutants caused by human activities induces the deterioration of surface water quality. To reveal the characteristics of surface water quality in Chaohu Lake Basin and the influence of human activities, the hydrochemistry and stable isotope composition of hydrogen and oxygen in lake water and inflow river water were analyzed. The results show that the hydrochemical type of lake water is the Na-Cl type,while river water is the Na-Cl, Ca-Cl and mixed types. The ion proportional coefficient method and principal component analysis show that surface water is controlled by weathering of evaporated salt rocks and silicate rocks, in which Cl- and SO42- are affected by fertilizers and sewage to some extent. There is a strong correlation between conventional ions and nutrient indexes, which indicates that dissolved ions are affected not only by rock weathering but also by human activities (such as the discharge of domestic sewage or nitrogen-containing wastewater and the use of fertilizers). The stable isotope values of hydrogen and oxygen in surface water are distributed at the lower right portion of the local precipitation line and are close to it, indicating that surface water mainly originates from precipitation. The high value of d-excess values in surface water indicates that evaporation is weak. As pollution indicators, EC, Cl- and NO3- indicates that the Nanfei River, Dianbu River, Shiwuli River and Pai River flow in northwestern of Chaohu Lake Basin through Hefei urban city are severely polluted, NO3- originates from manure and sewage. Rivers flowing through farmland areas are less polluted, and the use of agricultural fertilizer contributes greatly to NO3-.

Acoustic Beam Mapping for Guiding HIFU Therapy In Vivo Using Sub-Therapeutic Sound Pulse and Passive Beamforming.

OBJECTIVE: Although HIFU has been successfully applied in various clinical applications in the past two decades for the ablation of many types of tumors, one bottleneck in its wider applications is the lack of a reliable and affordable strategy to guide the therapy. This study aims at estimating the therapeutic beam path at the pre-treatment stage to guide the therapeutic procedure. METHODS: An incident beam mapping technique using passive beamforming was proposed based on a clinical HIFU system and an ultrasound imaging research system. An optimization model was created to map the cross-like beam pattern by maximizing the total energy within the mapped area. This beam mapping technique was validated by comparing the estimated focal region with the HIFU-induced actual focal region (damaged region) through simulation, in-vitro, ex-vivo and in-vivo experiments. RESULTS: The results of this study showed that the proposed technique was, to a large extent, tolerant of sound speed inhomogeneities, being able to estimate the focal location with errors of 0.15 mm and 0.93 mm under in-vitro and ex-vivo situations respectively, and slightly over 1 mm under the in-vivo situation. It should be noted that the corresponding errors were 6.8 mm, 3.2 mm, and 9.9 mm respectively when the conventional geometrical method was used. CONCLUSION: This beam mapping technique can be very helpful in guiding the HIFU therapy and can be easily applied in clinical environments with an ultrasound-guided HIFU system. SIGNIFICANCE: The technique is safe and can potentially be adapted to other ultrasound-related beam manipulating applications.