A switch in the pathway of TRPC3-mediated calcium influx into brain pericytes contributes to capillary spasms after subarachnoid hemorrhage.

Calcium influx and subsequent elevation of the intracellular calcium concentration ([Ca2+]i) induce contractions of brain pericytes and capillary spasms following subarachnoid hemorrhage. This calcium influx is exerted through cation channels. However, the specific calcium influx pathways in brain pericytes after subarachnoid hemorrhage remain unknown. Transient receptor potential canonical 3 (TRPC3) is the most abundant cation channel potentially involved in calcium influx into brain pericytes and is involved in calcium influx into other cell types either via store-operated calcium entry (SOCE) or receptor-operated calcium entry (ROCE). Therefore, we hypothesized that TRPC3 is associated with [Ca2+]i elevation in brain pericytes, potentially mediating brain pericyte contraction and capillary spasms after subarachnoid hemorrhage. In this study, we isolated rat brain pericytes and demonstrated increased TRPC3 expression and its currents in brain pericytes after subarachnoid hemorrhage. Calcium imaging of brain pericytes revealed that changes in TRPC3 expression mediated a switch from SOCE-dominant to ROCE-dominant calcium influx after subarachnoid hemorrhage, resulting in significantly higher [Ca2+]i levels after SAH. TRPC3 activity in brain pericytes also contributed to capillary spasms and reduction in cerebral blood flow in an in vivo rat model of subarachnoid hemorrhage. Therefore, we suggest that the switch in TRPC3-mediated calcium influx pathways plays a crucial role in the [Ca2+]i elevation in brain pericytes after subarachnoid hemorrhage, ultimately leading to capillary spasms and a reduction in cerebral blood flow.

Seawater flooding of calcareous soils: Implications for trace and alkaline metals mobility.

Developing management strategies to safeguard public health and environmental sustainability requires a comprehensive understanding of the solubility and mobility of trace and alkaline metals in the event of seawater flooding. This study investigated the effects of seawater flooding, along the duration of flooding, on the release of trace and alkaline metals (Mn, Fe, Cu, Zn, Ca, K, and Mg) in two calcareous soils (Krome and Biscayne) located in southern Florida. Seawater flooding experiments involved two soil types and four flooding durations (1, 7, 14, and 28 days) replicated three times. Freshwater flooding experiments were also conducted for comparison. After each flooding experiment, soil samples were collected at three depths (15, 30, and 45 cm), and analyzed for selected elements. Comparative analysis revealed significant releases of Mn, Fe, and Zn in both soils flooded by seawater compared to freshwater. In most cases, significant increments were evident as early as 1-day exposure to seawater flooding, which further increased with flooding duration. However, the impacts of seawater flooding had notable differences between the two soils. Seawater flooding in Krome soil for 28 days, resulted in higher Mn, Fe, and Zn contents by 58, 340, and 510% compared with freshwater flooding, while corresponding increases in Biscayne soil were 3.3, 130, and 180%, respectively. Comparable marginal increases in Cu content were observed for both soils. Similarly, seawater flooding increased K, Mg, and Na contents from single-day flooding. The interplay between soil type, column depth, flooding duration, and their interactions proved influential factors in determining Mn, Fe, Cu, and Zn releases, with peak levels typically observed on the 28th day of flooding and at bottom depths. Overall, these findings highlight the release of these elements, raising concerns about potential plant toxicity and groundwater or surface water contamination due to leaching and runoff.

Novel pit and fissure sealant with nano-CaF2 and antibacterial monomer: Fluoride recharge, microleakage, sealing ability and cytotoxicity.

Conventional resin-based sealants release minimal fluoride ions (F) and lack antibacterial activity. The objectives of this study were to: (1) develop a novel bioactive sealant containing calcium fluoride nanoparticles (nCaF2) and antibacterial dimethylaminohexadecyl methacrylate (DMAHDM), and (2) investigate mechanical performance, F recharge and re-release, microleakage, sealing ability and cytotoxicity. Helioseal F served as commercial control. The initial F release from sealant containing 20% nCaF2 was 25-fold that of Helioseal F. After ion exhaustion and recharge, the F re-release from bioactive sealant did not decrease with increasing number of recharge and re-release cycles. Elastic modulus of new bioactive sealant was 44% higher than Helioseal F. The new sealant had excellent sealing, minimal microleakage, and good cytocompatibility. Hence, the nanostructured sealant had substantial and sustained F release and antibacterial activity, good sealing ability and biocompatibility. The novel bioactive nCaF2 sealant is promising to provide long-term F ions for caries prevention.

A novel mussel-inspired desensitizer based on radial mesoporous bioactive nanoglass for the treatment of dentin exposure: An in vitro study.

OBJECTIVES: The dentin exposure always leads to dentin hypersensitivity and the acid-resistant/abrasion-resistant stability of current therapeutic approaches remain unsatisfatory. Inspired by the excellent self-polymerization/adherence activity of mussels and the superior mineralization ability of bioactive glass, a novel radial mesoporous bioactive nanoglass coated with polydopamine (RMBG@PDA) was developed for prevention and management of dentin hypersensitivity. METHODS: Radial mesoporous bioactive nanoglass (RMBG) was synthesized by the sol-gel process combined with the cetylpyridine bromide template self-assembly technique. RMBG@PDA was synthesized by a self-polymerization process involving dopamine and RMBG in an alkaline environment. Then, the nanoscale morphology, chemical structure, crystalline phase and Zeta potential of RMBG and RMBG@PDA were characterized. Subsequently, the ion release ability, bioactivity, and cytotoxicity of RMBG and RMBG@PDA in vitro were investigated. Moreover, an in vitro experimental model of dentin hypersensitivity was constructed to evaluate the effectiveness of RMBG@PDA on dentinal tubule occlusion, including resistances against acid and abrasion. Finally, the Young's modulus and nanohardness of acid-etched dentin were also detected after RMBG@PDA treatment. RESULTS: RMBG@PDA showed a typical nanoscale morphology and noncrystalline structure. The use of RMBG@PDA on the dentin surface could effectively occlude dentinal tubules, reduce dentin permeability and achieve excellent acid- and abrasion-resistant stability. Furthermore, RMBG@PDA with excellent cytocompatibility held the capability to recover the Young's modulus and nanohardness of acid-etched dentin. CONCLUSION: The application of RMBG@PDA with superior dentin tubule occlusion ability and acid/abrasion-resistant stability can provide a therapeutic strategy for the prevention and the management of dentin hypersensitivity.

Effects of Vegetation Types and Soil Properties on Regional Soil Carbon and Nitrogen in Salinized Reservoir Wetland, Northeast China.

This study investigated the spatial variability in soil organic carbon (SOC), total nitrogen (TN), soil microbial biomass carbon (SMBC), soil microbial biomass nitrogen (SMBN) and their possible relationships with other soil properties in the Hongqipao reservoir, which is dominated by different vegetation types. The results showed that there were high spatial variabilities in SOC, TN, SMBC and SMBN, and that the SOC, TN, SMBC and SMBN contents decreased with increasing soil depth in the Hongqipao reservoir. The SOC was significantly positively correlated with TN, SMBC, moisture content (MC) and negatively correlated with carbon to nitrogen ratio (C:N ratio) and bulk density (BD). Soil TN was significantly positively correlated with SMBC, SMBN, MC and negatively correlated with the C:N ratio, BD and pH. The SMBC was significantly positively correlated with SMBN, MC and negatively correlated with the C:N ratio, BD and pH. The SMBN was significantly negatively correlated with the C:N ratio and BD. All of the measures of soil properties in this study could explain the higher significant variability in the response variables (SOC, TN, SMBC and SMBN contents). The generalized additive model (GAM) showed that SOC and TN had different influencing factors in different soil depths. The structural equation model (SEM) showed that vegetation types had a significantly positive effect on TN and SMBN, and the soil depths had a significantly positive effect on SOC and a significantly negative effect on TN and SMBC. This study further suggests that vegetation types play a major role in determining the spatial characteristics of soil carbon and nitrogen, and any changes in the vegetation types in the reservoir may influence the distributions of soil carbon and nitrogen. This may affect the global carbon and nitrogen budgets and the atmospheric greenhouse gas concentration significantly.

A Controlled-Release Nanofertilizer Improves Tomato Growth and Minimizes Nitrogen Consumption.

Minimizing the consumption of agrochemicals, particularly nitrogen, is the ultimate goal for achieving sustainable agricultural production with low cost and high economic and environmental returns. The use of biopolymers instead of petroleum-based synthetic polymers for CRFs can significantly improve the sustainability of crop production since biopolymers are biodegradable and not harmful to soil quality. Lignin is one of the most abundant biopolymers that naturally exist.In this study, controlled-release fertilizers were developed using a biobased nanocomposite of lignin and bentonite clay mineral as a coating material for urea to increase nitrogen use efficiency. Five types of controlled-release urea (CRU) were prepared using two ratios of modified bentonite as well as techniques. The efficiency of the five controlled-release nano-urea (CRU) fertilizers in improving the growth of tomato plants was studied under field conditions. The CRU was applied to the tomato plants at three N levels representing 100, 50, and 25% of the recommended dose of conventional urea. The results showed that all CRU treatments at the three N levels significantly enhanced plant growth parameters, including plant height, number of leaves, fresh weight, and dry weight, compared to the control. Additionally, most CRU fertilizers increased total yield and fruit characteristics (weight, length, and diameter) compared to the control. Additionally, marketable yield was improved by CRU fertilizers. Fruit firmness and acidity of CRU treatments at 25 and 50% N levels were much higher than both the 100% CRU treatment and the control. The vitamin C values of all CRU treatments were lower than the control. Nitrogen uptake efficiencies (NUpE) of CRU treatments were 47-88%, which is significantly higher than that of the control (33%). In conclusion, all CRU treatments at an N level of 25% of the recommended dose showed better plant growth, yield, and fruit quality of tomatoes than the conventional fertilizer.

Harvest and Primary Culture of Leptomeningeal Lymphatic Endothelial Cells.

Leptomeningeal lymphatic endothelial cells (LLECs) are a recently discovered intracranial cellular population with a unique distribution clearly distinct from peripheral lymphatic endothelial cells. Their cellular function and clinical implications remain largely unknown. Consequently, the availability of a supply of LLECs is essential for conducting functional research in vitro. However, there is currently no existing protocol for harvesting and culturing LLECs in vitro. This study successfully harvested LLECs using a multi-step protocol, which included coating the flask with fibronectin, dissecting the leptomeninges with the assistance of a microscope, enzymatically digesting the leptomeninges to prepare a single-cell suspension, inducing the expansion of LLECs with vascular endothelial growth factor-C (VEGF-C), and selecting lymphatic vessel hyaluronic receptor-1 (LYVE-1) positive cells through magnetic-activated cell sorting (MACS). This process ultimately led to the establishment of a primary culture. The purity of the LLECs was confirmed through immunofluorescence staining and flow cytometric analysis, with a purity level exceeding 95%. This multi-step protocol has demonstrated reproducibility and feasibility, which will greatly facilitate the exploration of the cellular function and clinical implications of LLECs.

Imaging Vital and Non-vital Brain Pericytes in Brain Slices following Subarachnoid Hemorrhage.

Pericytes are crucial mural cells situated within cerebral microcirculation, pivotal in actively modulating cerebral blood flow via contractility adjustments. Conventionally, their contractility is gauged by observing morphological shifts and nearby capillary diameter changes under specific circumstances. Yet, post-tissue fixation, evaluating vitality and ensuing pericyte contractility of imaged brain pericytes becomes compromised. Similarly, genetically labeling brain pericytes falls short in distinguishing between viable and non-viable pericytes, particularly in neurologic conditions like subarachnoid hemorrhage (SAH), where our preliminary investigation validates brain pericyte demise. A reliable protocol has been devised to surmount these constraints, enabling simultaneous fluorescent tagging of both functional and non-functional brain pericytes in brain sections. This labeling method allows high-resolution confocal microscope visualization, concurrently marking the brain slice microvasculature. This innovative protocol offers a means to appraise brain pericyte contractility, its impact on capillary diameter, and pericyte structure. Investigating brain pericyte contractility within the SAH context yields insightful comprehension of its effects on cerebral microcirculation.

Gene Expression, Enzyme Activity, Nitrogen Use Efficiency, and Yield of Rice Affected by Controlled-Release Nitrogen.

Controlled- or slow-release urea can improve crop nitrogen use efficiencies and yields in many agricultural production systems. The effect of controlled-release urea on the relationships between levels of gene expression and yields has not been adequately researched. We conducted a 2 year field study with direct-seeded rice, which included treatments of controlled-release urea at four rates (120, 180, 240, and 360 kg N ha-1), a standard urea treatment (360 kg N ha-1), and a control treatment without applied nitrogen. Controlled-release urea improved the inorganic nitrogen concentrations of root-zone soil and water, functional enzyme activities, protein contents, grain yields, and nitrogen use efficiencies. Controlled-release urea also improved the gene expressions of nitrate reductase [NAD(P)H] (EC 1.7.1.2), glutamine synthetase (EC 6.3.1.2), and glutamate synthase (EC 1.4.1.14). With the exception of glutamate synthase activity, there were significant correlations among these indices. The results showed that controlled-release urea improved the content of inorganic nitrogen within the rice root zone. Compared with urea, the average enzyme activity of controlled-release urea increased by 50-200%, and the relative gene expression was increased by 3-4 times on average. The added soil nitrogen increased the level of gene expression, allowing enhanced synthesis of enzymes and proteins for nitrogen absorption and use. Hence, controlled-release urea improved the nitrogen use efficiency and the grain yield of rice. Controlled-release urea is an ideal nitrogen fertilizer showing great potential for improving rice production.

Biochar impacts on soil nitrogen and carbon dynamics in a Spodosol amended with biosolids and inorganic fertilizer.

Despite evidence suggesting that biochar can retain nutrients, particularly nitrogen (N), and reduce the risks of transport, research on the co-application of biochar with organic and inorganic fertilizer sources is limited. Three laboratory studies (herein referred to as static incubation, column leaching, and batch sorption) were conducted to evaluate the impacts of two biochar materials (pine and grass biochar generated at temperatures of 800 and 400°C, respectively) on N and carbon (C) dynamics in soils amended with different N sources (ammonium nitrate, Class B, and Class AA biosolids). Nitrogen sources were applied at an equivalent rate of 180 kg N ha-1 while biochar was applied at a 1% (w/w) rate. Biochar effects on soil N and C dynamics were variable and dependent on biochar and N sources. A negligible but significant effect of pine biochar in reducing NH4 leaching was observed; however, both biochar materials were ineffective in reducing NO3 or inorganic N leaching. Reductions in leachate NH4 by pine biochar were attributed to relative greater ability of this material to retain NH4 than grass biochar. Both biochar materials exhibited no ability to sorb NO3 . Similarly, biochar had no effect on soil N2 O emissions. Class B biosolids resulted in greater N leaching and soil N2 O emissions compared to other fertilizers. This response was likely due to inherently high levels of inorganic N and moisture, which possibly favored denitrification. Further research is warranted to better understand the underlying mechanisms controlling soil N and C dynamics and responses to co-application with fertilizer sources.

Evaluation of dentinal tubule occlusion and pulp tissue response after using 980-nm diode laser for dentin hypersensitivity treatment.

OBJECTIVES: To evaluate the effectiveness of the 980-nm diode laser for dentinal tubule occlusion, measure the intrapulpal temperature, and investigate the dental pulp response. MATERIALS AND METHODS: The dentinal samples were randomly divided into G1-G7 groups: control; 980-nm laser irradiation (0.5 W, 10 s; 0.5 W, 10 s × 2; 0.8 W, 10 s; 0.8 W, 10 s × 2; 1.0 W, 10 s; 1.0 W, 10 s × 2). The dentin discs were applied for laser irradiation and analyzed by scanning electron microscopy (SEM). The intrapulpal temperature was measured on the 1.0-mm and 2.0-mm thickness samples, and then divided into G2-G7 groups according to laser irradiation. Moreover, forty Sprague Dawley rats were randomly divided into the laser-irradiated group (euthanized at 1, 7, and 14 days after irradiation) and the control group (non-irradiated). qRT-PCR, histomorphology, and immunohistochemistry analysis were employed to evaluate the response of dental pulp. RESULTS: SEM indicated the occluding ratio of dentinal tubules in the G5 (0.8 W, 10 s × 2) and G7 (1.0 W, 10 s × 2) were significantly higher than the other groups (p < 0.05). The maximum intrapulpal temperature rises in the G5 were lower than the standard line (5.5 ℃). qRT-PCR showed that the mRNA expression level of TNF-α and HSP-70 upregulated significantly at 1 day (p < 0.05). Histomorphology and immunohistochemistry analysis showed that, compared with the control group, the inflammatory reaction was slightly higher at the 1 and 7 days (p < 0.05) and decreased to the normal levels at 14 days (p > 0.05). CONCLUSIONS: A 980-nm laser at a power of 0.8 W with 10 s × 2 defines the best treatment for dentin hypersensitivity in terms of compromise between the efficacy of the treatment and the safety of the pulp. CLINICAL RELEVANCE: The 980-nm laser is an effective option for treating dentin sensitivity. However, we need to ensure the safety of the pulp during laser irradiation.

Biochar inhibited hydrogen radical-induced Cd bioavailability in a paddy soil.

Herein, hydrogen (H·) radical was observed as a new pathway to produce hydroxyl (OH·) radicals that promoted cadmium sulfide (CdS) dissolution and thus Cd solubility in paddy soils. In soil incubation experiments, the bioavailable Cd concentrations in flooded paddy soils were increased by 8.44 % as the soil was aerated for 3d. For the first time, the H· radical was observed in aerated soil sludge. The association of CdS dissolution with free radicals was thereafter confirmed in an electrolysis experiment. Both H· and OH· radicals in electrolyzed water were confirmed by the electron paramagnetic resonance analysis. In the system with CdS, water electrolysis increased soluble Cd2+ concentration by 60.92 times, which was compromised by 43.2 % when the radical scavenger was introduced. This confirmed the free radicals can lead to oxidative dissolution of CdS. The H· radical was generated in systems with fulvic acid or catechol irradiated by ultraviolet lights, indicating soil organic carbon could be an important precursor for H· and OH· radicals. Biochar application decreased soil DTPA-Cd by 22-56 % invoking mechanisms besides adsorption. First, biochar quenched radicals and reduced CdS dissolution by 23.6 % in electrolyzed water in which -C-OH of biochar was oxidized to CO. Second, biochar boosted Fe/S-reducing bacteria and thus compromised CdS dissolution, as affirmed by a reversal correlation between soil available Fe2+ and DTPA-Cd concentrations. A similar phenomenon occurred in Shewanella oneidensis MR-1-inoculated soils. This study provided new insights into the bioavailability of Cd and offered feasible measures to remediate Cd-contaminated paddy soils with biochars.

Modification of Fabrication Process for Prolonged Nitrogen Release of Lignin-Montmorillonite Biocomposite Encapsulated Urea.

Crop production faces challenges in achieving high fertilizer use efficiency. To address this issue, slow-release fertilizers (SRFs) have emerged as effective solutions to minimize nutrient losses caused by leaching, runoff, and volatilization. In addition, replacing petroleum-based synthetic polymers with biopolymers for SRFs offers substantial benefits in terms of sustainability of crop production and soil quality preservation, as biopolymers are biodegradable and environmentally friendly. This study focuses on modifying a fabrication process to develop a bio-composite comprising biowaste lignin and low-cost montmorillonite clay mineral for encapsulating urea to create a controllable release fertilizer (CRU) with a prolonged nitrogen release function. CRUs containing high N contents of 20 to 30 wt.% were successfully and extensively characterized using X-Ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Scanning Electron Microscopy (SEM). The results showed that the releases of N from CRUs in water and soil extended to considerably long periods of 20 and 32 days, respectively. The significance of this research is the production of CRU beads that contain high N percentages and have a high soil residence period. These beads can enhance plant nitrogen utilization efficiency, reduce fertilizer consumption, and ultimately contribute to agricultural production.

Development of multifunctional copper alginate and bio-polyurethane bilayer coated fertilizer: Controlled-release, selenium supply and antifungal.

Bio-based controlled release fertilizers (BCRFs) are cost-effective and renewable thus gradually replacing petroleum-based controlled release fertilizers (CRFs). However, most of the study mainly focused on modifying BCRFs to improve controlled-release performance. It is necessary to further increase the functionality of BCRF for expanding the application. A multifunctional double layered bio-based CRF (DCRF) was prepared. Urea was used as the core of fertilizer, bio-based polyurethane was used as the inner coating, and sodium alginate and copper ions formed the hydrogel as the outer coating. In addition, mesoporous silica nanoparticles loaded with sodium selenate was used to modify the sodium alginate hydrogel (MSN@Se hydrogel). The results showed that the nitrogen longevity of the DCRF was much better than that of urea and BCRF. The selenium nutrient longevity of the DCRF was 40 h, much longer than that of sodium selenate. The DCRF improved the yield and nutritive value of cherry radish (Raphanus sativus L. var.radculus pers) with the elevated contents of selenium, an essential trace element. Moreover, the DCRF showed inhibitory effect on Fusarium oxysporum Schltdl. and could resist soil-borne fungal diseases continuously. Overall, this multifunctional fertilizer has great potential for expanding the use of BCRFs for sustainable development of agriculture.

Evaluating Nicotinamide Adenine Dinucleotide for Its Effects on Halo Blight of Snap Bean.

Halo blight, caused by Pseudomonas syringae pv. phaseolicola, is one of the major bacterial diseases on snap bean in Florida, and the outbreaks of this disease have occurred more often in recent years. Current management of this disease primarily depends on application of fixed copper-based bactericides but climate change and resistance development in the pathogen populations still cause hardship for management of this disease, especially in south Florida. In this study, nicotinamide adenine dinucleotide (NAD+) was evaluated in the greenhouse for its potential to reduce halo blight on snap bean. When NAD+ at 5 mM was applied by soil drench, foliar spray, or leaf infiltration, NAD+ significantly (P < 0.05) reduced disease severity of halo blight on snap bean compared with the untreated control. When NAD+ was applied by leaf infiltration, among the tested concentrations, NAD+ at 0.5 to 1.0 mM was most effective in decreasing halo blight disease. NAD+ at 2.5 mM applied as a foliar spray in rotation with Kocide 3000 (copper hydroxide) at 0.5 mg/ml further reduced disease severity compared with Kocide 3000 alone. In the in vitro study, no inhibitory effects of NAD+ were detected on the bacterial pathogen P. syringae pv. phaseolicola. Results of real-time PCR showed that the defense-related genes PR1, AZI1, EDS1, SARD1, PDF1.2, and PAL1 were upregulated in the NAD+ treatment. Taken together, these data indicated that NAD+ significantly suppressed halo blight on snap bean, and application of NAD+ has the potential in management of this important disease.

In situ activation of COOH-functionalized ZIF-90-enabled reductive CO2N-formylation.

A heterogeneous ZIF-90-based catalyst functionalized with COOH and with a porous structure was facilely prepared for efficient CO2 adsorption and activation to undergo reductive N-formylation with a wide range of amines (15 examples) to furnish N-formamides (78-94% yields). The -COO- species generated by an in situ interaction with amine acts as a key species for activating hydrosilane to capture CO2, and remarkably facilitates a cascade C-N coupling and hydrogenation process. Our findings show a facile strategy for the rational construction of robust active sites for reductive CO2 valorization.

Combined effects of hydrothermally-altered feldspar and water regime on cadmium minimization in rice.

The accumulation of cadmium (Cd) in grains and edible parts of crops poses a risk to human health. Because rice is the staple food of more than half of the world population, reducing Cd uptake by rice is critical for food safety. HydroPotash (HYP), an innovative potassium fertilizer produced with a hydrothermal process, has the characteristics of immobilizing heavy metals and potential use for remediating Cd-contaminated soils. The objective of this study was to evaluate the HYP as a soil amendment to immobilize Cd in acidic soils and to reduce the accumulation of Cd in rice tissues. The experiment was performed in a greenhouse with a Cecil sandy loam soil (pH 5.3 and spiked with 3 mg Cd kg-1) under either flooding conditions (water level at 4 cm above the soil surface) or at field capacity. Two hydrothermal materials (HYP-1 and HYP-2) were compared with K-feldspar + Ca(OH)2 (the raw material used for producing HYP), Ca(OH)2, zeolite, and a control (without amendment). After 30 days of soil incubation, HydroPotashs, the raw material, and Ca(OH)2 increased both soil solution pH and electrical conductivity. These materials also decreased soluble Cd concentration (up to 99.7%) compared with the control (p < 0.05). After 145 days, regardless of the materials applied, plant growth was favored (up to 35.8%) under the flooded regime. HydroPotash-1 was more effective for increasing dry biomass compared with other amendments under both water regimes. HydroPotashs reduced extractable Cd in soil, Cd content in plant biomass at tillering and maturing stage, and were efficient in minimizing Cd accumulation in rice grains.

Using liquefied biomass hydrogel to mitigate salinity in salt-affected soils.

Salinity affects over 33% of irrigated farmland globally. Developing a low-cost, safe, and effective material as a soil salinity mitigation option would be of significant importance. This study proposed to synthesize a hydrogel using liquefied biomass from sugarcane bagasse, polyvinyl alcohol, and sodium tetraborate decahydrate. The effectiveness of the produced hydrogel in mitigating soil salinity was evaluated based on an incubation experiment at two salinity levels (5 and 10 dS m-1). The experiment was conducted by mixing liquefied hydrogel with soil at four application rates (0, 1, 2, and 3% w/w) with three replications. Porewater and soil samples were tested for pH and electrical conductivity (EC). Soil samples were also analyzed for selected cations and anions. The results demonstrated that hydrogel significantly reduced porewater EC at both 5 and 10 dS m-1 salt solutions. In addition, hydrogel reduced Cl-, P, Ca2+, and Al3+ concentrations in soil samples with maximum reductions observed from 3% hydrogel treatment. However, pH of porewater showed a consistent increase with hydrogel application. The application of hydrogel also increased NH4-N at high salt level. Overall, hydrogel has shown promising results in reducing soil salinity and could potentially be used as a soil amendment for saline soils.

Novel bioactive adhesive containing dimethylaminohexadecyl methacrylate and calcium phosphate nanoparticles to inhibit metalloproteinases and nanoleakage with three months of aging in artificial saliva.

OBJECTIVES: The objectives of this study were to: (1) develop a multifunctional adhesive via dimethylaminohexadecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP); and (2) investigate its ability to provide metalloproteinases (MMPs) deactivation and remineralization for long-term dentin bonding durability. METHODS: DMAHDM and NACP were incorporated into Adper™ Single Bond 2 Adhesive (SB2) at mass fractions of 5% and 20%, respectively. Degree of conversion and contact angle were measured. Endogenous MMP activity of the demineralized dentin beams, Masson's trichrome staining, nano-indentation, microtensile bond strength and interfacial nanoleakage analyses were investigated after 24 h and 3 months of storage aging in artificial saliva. RESULTS: Adding DMAHDM and NACP did not compromise the degree of conversion and contact angle of SB2 (p > 0.05). DMAHDM and NACP incorporation reduced the endogenous MMP activity by 53 %, facilitated remineralization, and increased the Young's modulus of hybrid layer by 49 % after 3 months of aging in artificial saliva, compared to control. For SB2 Control, the dentin bond strength decreased by 38 %, with greater nanoleakage expression, after 3 months of aging (p < 0.05). However, DMAHDM+NACP group showed no loss in bond strength, with much less nanoleakage, after 3 months of aging (p > 0.05). SIGNIFICANCE: DMAHDM+NACP adhesive greatly reduced MMP-degradation activity in demineralized dentin, induced remineralization at adhesive-dentin interface, and maintained the dentin bond strength after aging, without adversely affecting polymerization and dentin wettability. This new adhesive has great potential to help eliminate secondary caries, prevent hybrid layer degradation, and increase the resin-dentin bond longevity.

A Highly Effective Biomass-Derived Solid Acid Catalyst for Biodiesel Synthesis Through Esterification.

Efficient valorization of renewable liquid biomass for biodiesel production using the desirable biomass-based catalysts is being deemed to be an environmentally friendly process. Herein, a highly active biomass-based solid acid catalyst (SiO2@Cs-SO3H) with renewable chitosan as raw material through sulfonation procedure under the relatively mild condition was successfully manufactured. The SiO2@Cs-SO3H catalyst was systematically characterized, especially with a large specific surface area (21.82 m2/g) and acidity (3.47 mmol/g). The catalytic activity of SiO2@Cs-SO3H was evaluated by esterification of oleic acid (OA) and methanol for biodiesel production. The best biodiesel yield was acquired by Response Surface Methodology (RSM). The optimized reaction conditions were temperature of 92°C, time of 4.1 h, catalyst dosage of 6.8 wt%, and methanol to OA molar ratio of 31.4, respectively. In this case, the optimal experimental biodiesel yield was found to be 98.2%, which was close to that of the predicted value of 98.4%, indicating the good reliability of RSM employed in this study. Furthermore, SiO2@Cs-SO3H also exhibited good reusability in terms of five consecutive recycles with 87.0% biodiesel yield. As such, SiO2@Cs-SO3H can be considered and used as a bio-based sustainable catalyst of high-efficiency for biodiesel production.