Coupled photothermal vortices for capture, sorting, and transportation of particles.

Optofluidic techniques have evolved as a prospering strategy for microparticle manipulation via fluid. Unfortunately, there is still a lack of manipulation with simple preparation, easy operation, and multifunctional integration. In this Letter, we present an optofluidic device based on a graphite oxide (GO)-coated dual-fiber structure for multifunctional particle manipulation. By changing the optical power and the relative distance of the fibers, the system can excite thermal fluidic vortices with three inter-coupled states, namely uncoupled, partially coupled and completely coupled states, and therefore can realize capture, sorting, and transportation of the target particles. We conduct a numerical analysis of the whole system, and the results are consistent with the experimental phenomena. This versatile device can be utilized to manipulate target particles in complex microscopic material populations with the advantages of flexible operation, user-friendly control, and low cost.

A CT based radiomics analysis to predict the CN0 status of thyroid papillary carcinoma: a two- center study.

OBJECTIVES: To develop and validate radiomics model based on computed tomography (CT) for preoperative prediction of CN0 status in patients with papillary thyroid carcinoma (PTC). METHODS: A total of 548 pathologically confirmed LNs (243 non-metastatic and 305 metastatic) two distinct hospitals were retrospectively assessed. A total of 396 radiomics features were extracted from arterial-phase CT images, where the strongest features containing the most predictive potential were further selected using the least absolute shrinkage and selection operator (LASSO) regression method. Delong test was used to compare the AUC values of training set, test sets and cN0 group. RESULTS: The Rad-score showed good discriminating performance with Area Under the ROC Curve (AUC) of 0.917(95% CI, 0.884 to 0.950), 0.892 (95% CI, 0.833 to 0.950) and 0.921 (95% CI, 868 to 0.973) in the training, internal validation cohort and external validation cohort, respectively. The test group of CN0 with a AUC of 0.892 (95% CI, 0.805 to 0.979). The accuracy was 85.4% (sensitivity = 81.3%; specificity = 88.9%) in the training cohort, 82.9% (sensitivity = 79.0%; specificity = 88.7%) in the internal validation cohort, 85.4% (sensitivity = 89.7%; specificity = 83.8%) in the external validation cohort, 86.7% (sensitivity = 83.8%; specificity = 91.3%) in the CN0 test group.The calibration curve demonstrated a significant Rad-score (P-value in H-L test > 0.05). The decision curve analysis indicated that the rad-score was clinically useful. CONCLUSIONS: Radiomics has shown great diagnostic potential to preoperatively predict the status of cN0 in PTC.

Sustainable Recycling of Selenium-Based Optoelectronic Devices.

Selenium (Se), the world's oldest optoelectronic material, has been widely applied in various optoelectronic devices such as commercial X-ray flat-panel detectors and photovoltaics. However, despite the rare and widely-dispersed nature of Se element, a sustainable recycling of Se and other valuable materials from spent Se-based devices has not been developed so far. Here a sustainable strategy is reported that makes use of the significantly higher vapor pressure of volatile Se compared to other functional layers to recycle all of them from end-of-life Se-based devices through a closed-space evaporation process, utilizing Se photovoltaic devices as a case study. This strategy results in high recycling yields of ≈ 98% for Se and 100% for other functional materials including valuable gold electrodes and glass/FTO/TiO2 substrates. The refabricated photovoltaic devices based on these recycled materials achieve an efficiency of 12.33% under 1000-lux indoor illumination, comparable to devices fabricated using commercially sourced materials and surpassing the current indoor photovoltaic industry standard of amorphous silicon cells.

Structure of Amorphous Selenium: Small Ring, Big Controversy.

Selenium (Se) discovered in 1817 belongs to the family of chalcogens. Surprisingly, despite the long history of over two centuries and the chemical simplicity of Se, the structure of amorphous Se (a-Se) remains controversial to date regarding the dominance of chains versus rings. Here, we find that vapor-deposited a-Se is composed of disordered rings rather than chains in melt-quenched a-Se. We further reveal that the main origin of this controversy is the facile transition of rings to chains arising from the inherent instability of rings. This transition can be inadvertently triggered by certain characterization techniques themselves containing above-bandgap illumination (above 2.1 eV) or heating (above 50 °C). We finally build a roadmap for obtaining accurate Raman spectra by using above-bandgap excitation lasers with low photon flux (below 1017 phs m-2 s-1) and below-bandgap excitation lasers measured at low temperatures (below -40 °C) to minimize the photoexcitation- and heat-induced ring-to-chain transitions.

Size Dependence of Gold Nanorods for Efficient and Rapid Photothermal Therapy.

In recent years, gold nanomaterials have become a hot topic in photothermal tumor therapy due to their unique surface plasmon resonance characteristics. The effectiveness of photothermal therapy is highly dependent on the shape and size of gold nanoparticles. In this work, we investigate the photothermal therapeutic effects of four different sizes of gold nanorods (GNRs). The results show that the uptake of short GNRs with aspect ratios 3.3-3.5 by cells is higher than that of GNRs with aspect ratios 4-5.5. Using a laser with single pulse energy as low as 28 pJ laser for 20 s can induce the death of liver cancer cells co-cultured with short GNRs. Long GNRs required twice the energy to achieve the same therapeutic effect. The dual-temperature model is used to simulate the photothermal response of intracellular clusters irradiated by a laser. It is found that small GNRs are easier to compact because of their morphological characteristics, and the electromagnetic coupling between GNRs is better, which increases the internal field enhancement, resulting in higher local temperature. Compared with a single GNR, GNR clusters are less dependent on polarization and wavelength, which is more conducive to the flexible selection of excitation laser sources.

Metal exsolution from perovskite-based anodes in solid oxide fuel cells.

Solid oxide fuel cells (SOFCs) are highly efficient and environmentally friendly devices for converting fuel into electrical energy. In this regard, metal nanoparticles (NPs) loaded onto the anode oxide play a crucial role due to their exceptional catalytic activity. NPs synthesized through exsolution exhibit excellent dispersion and stability, garnering significant attention for comprehending the exsolution process mechanism and consequently improving synthesis effectiveness. This review presents recent advancements in the exsolution process, focusing on the influence of oxygen vacancies, A-site defects, lattice strain, and phase transformation on the variation of the octahedral crystal field in perovskites. Moreover, we offer insights into future research directions to further enhance our understanding of the mechanism and achieve significant exsolution of NPs on perovskites.

Lab-on-Fiber Sensors with Ag/Au Nanocap Arrays Based on the Two Deposits of Polystyrene Nanospheres.

Surface-enhanced Raman spectroscopy (SERS) can boost the pristine Raman signal significantly which could be exploited for producing innovative sensing devices with advanced properties. However, the inherent complexity of SERS systems restricts their further applications in rapid detection, especially in situ detection in narrow areas. Here, we construct an efficient and flexible SERS-based Lab-on-Fiber (LOF) sensor by integrating Ag/Au nanocap arrays obtained by Ag/Au coating polystyrene nanospheres on the optical fiber face. We obtain rich "hot spots" at the nanogaps between neighboring nanocaps, and further achieve SERS performance with the assistance of laser-induced thermophoresis on the metal film that can achieve efficiency aggregation of detected molecules. We achieve a high Raman enhancement with a low detection limitation of 10-7 mol/L for the most efficient samples based on the above sensor. This sensor also exhibits good repeatability and stability under multiple detections, revealing the potential application for in situ detection based on the reflexivity of the optical fiber.

Failure Mechanism and Optimization of Metal-Supported Solid Oxide Fuel Cells.

A solid oxide fuel cell (SOFC) is a clean, efficient energy conversion device with wide fuel applicability. Metal-supported solid oxide fuel cells (MS-SOFCs) exhibit better thermal shock resistance, better machinability, and faster startup than traditional SOFCs, making them more suitable for commercial applications, especially in mobile transportation. However, many challenges remain that hinder the development and application of MS-SOFCs. High temperature may accelerate these challenges. In this paper, the existing problems in MS-SOFCs, including high-temperature oxidation, cationic interdiffusion, thermal matching, and electrolyte defects, as well as lower temperature preparation technologies, including the infiltration method, spraying method, and sintering aids method, are summarized from different perspectives, and the improvement strategy of existing material structure optimization and technology integration is put forward.

Regioselective Multisite Atomic-Chlorine Passivation Enables Efficient and Stable Perovskite Solar Cells.

Passivating defects using organic halide salts, especially chlorides, is an effective method to improve power conversion efficiencies (PCEs) of perovskite solar cells (PSCs) arising from the stronger Pb-Cl bonding than Pb-I and Pb-Br bonding. However, Cl- anions with a small radius are prone to incorporation into the perovskite lattice that distorts the lead halide octahedron, degrading the photovoltaic performance. Here, we substitute atomic-Cl-containing organic molecules for widely used ionic-Cl salts, which not only retain the efficient passivation by Cl but also prevent the incorporation of Cl into the bulk lattice, benefiting from the strong covalent bonding between Cl atoms and organic frameworks. We find that only when the distance of Cl atoms in single molecules matches well with the distance of halide ions in perovskites can such a configuration maximize the defect passivation. We thereby optimize the molecular configuration to enable multiple Cl atoms in an optimal spatial position to maximize their binding with surface defects. The resulting PSCs achieve a certified PCE of 25.02%, among the highest PCEs for PSCs, and retain 90% of their initial PCE after 500 h of continuous operation.

Indoor photovoltaics awaken the world's first solar cells.

Selenium (Se) solar cells were the world's first solid-state photovoltaics reported in 1883, opening the modern photovoltaics. However, its wide bandgap (~1.9 eV) limits sunlight harvesting. Here, we revisit the world's oldest but long-ignored photovoltaic material with the emergence of indoor photovoltaics (IPVs); the absorption spectrum of Se perfectly matches the emission spectra of commonly used indoor light sources in the 400 to 700 nm range. We find that the widely used Te adhesion layer also passivates defects at the nonbonded Se/TiO2 interface. By optimizing the Te coverage from 6.9 to 70.4%, the resulting Se cells exhibit an efficiency of 15.1% under 1000 lux indoor illumination and show no efficiency loss after 1000 hours of continuous indoor illumination without encapsulation, outperforming the present IPV industry standard of amorphous silicon cells in both efficiency and stability. We further fabricate Se modules (6.75 cm2) that produce 232.6 µW output power under indoor illumination, powering a radio-frequency identification-based localization tag.

Study of hsa_circRNA_000121 and hsa_circRNA_004183 in papillary thyroid microcarcinoma.

We detected the expressions of hsa_circRNA_000121 and hsa_circRNA_ 004183 in papillary thyroid microcarcinoma (PTMC) and explored their relationship with the invasiveness of PTMC. PTMC patients with (n = 30; metastasis group) and without lymph node metastasis (n = 30; nonmetastasis group) were included. The levels of hsa_circRNA_000121, hsa_circRNA_004183, hsa-miR-4763, hsa-miR-6775, sarcoma gene (SRC), and MMP-14 were detected with real-time polymerase chain reaction. Receiver-operating characteristic (ROC) analyzed the diagnostic value of hsa_circRNA_000121 and hsa_circRNA_004183. Binary logistic regression analysis evaluated the relationship of gene expression with PTMC invasiveness. In PTMC tissue samples, compared with the metastasis group, the expression of hsa_circRNA_000121, hsa_circRNA_004183, SRC, and MMP-14 in the nonmetastasis group decreased, while the expression of hsa-miR-4763 and hsa-miR-6775 increased. In peripheral blood, compared with the metastasis group, the expression of hsa_circ_000121 and hsa_circRNA_004183 in the nonmetastasis group decreased. Both hsa_circRNA_000121 and hsa_circRNA_004183 had good sensitivity and specificity for diagnosing PTMC lymph node metastasis, with a cut-off value of 0.796 and 0.938, respectively. However, the gene expressions were not significantly associated with PTMC lymph node metastasis. Hsa_circRNA_000121 may upregulate SRC expression through hsa-miR-4763, while hsa_circRNA 000121 may upregulate MMP-14 expression through hsa-miR-6775, thereby promoting the aggressiveness of PTMC and ultimately leading to cervical lymph node metastasis. hsa_circRNA_000121 and hsa_circRNA_004183 may become potential biomarkers of PTMC aggressiveness.

Dorzagliatin in drug-naïve patients with type 2 diabetes: a randomized, double-blind, placebo-controlled phase 3 trial.

Improving glucose sensitivity remains an unmet medical need in treating type 2 diabetes (T2D). Dorzagliatin is a dual-acting, orally bioavailable glucokinase activator that enhances glucokinase activity in a glucose-dependent manner, improves glucose-stimulated insulin secretion and demonstrates effects on glycemic control in patients with T2D. We report the findings of a randomized, double-blind, placebo-controlled phase 3 clinical trial to evaluate the efficacy and safety of dorzagliatin in patients with T2D. Eligible drug-naïve patients with T2D (n = 463) were randomly assigned to the dorzagliatin or placebo group at a ratio of 2:1 for 24 weeks of double-blind treatment, followed by 28 weeks of open-label treatment with dorzagliatin for all patients. The primary efficacy endpoint was the change in glycated hemoglobin from baseline to week 24. Safety was assessed throughout the trial. At week 24, the least-squares mean change in glycated hemoglobin from baseline (95% confidence interval) was -1.07% (-1.19%, -0.95%) in the dorzagliatin group and -0.50% (-0.68%, -0.32%) in the placebo group (estimated treatment difference, -0.57%; 95% confidence interval: -0.79%, -0.36%; P < 0.001). The incidence of adverse events was similar between the two groups. There were no severe hypoglycemia events or drug-related serious adverse events in the dorzagliatin group. In summary, dorzagliatin improved glycemic control in drug-naïve patients with T2D and showed a good tolerability and safety profile.

Microfiber-directed reversible assembly of Au nanoparticles for SERS detection of pollutants.

Surface-enhanced Raman scattering (SERS) spectroscopy has attracted tremendous interest as a highly sensitive label-free tool to detect pollutants in aqueous environments. However, the high cost and poor reusability of conventional SERS substrates restrict their further applications in rapid and reproducible pollutant detection. Here, we report a reliable optical manipulation method to achieve rapid photothermal self-assembly of Au nanoparticles (AuNPs) in water within 30 s by a tapered optical fiber, which is utilized for highly sensitive SERS substrate preparation. The results show that the SERS substrate achieves low detection limits of 10-9 mol/L with an enhancement factor (EF) of 106 for chemical pollutants solutions, including thiram, pyrene, and rhodamine 6G. The SERS enhancement effect based on assembled AuNPs was more than 20 times that based on a gold colloid solution. As a result, the smart reversible assembly of AuNPs exhibits switchable plasmonic coupling for tuning SERS activity, which is promising for the application of SERS-based sensors and environmental pollutant detection.

PVA-SM microstructure enhanced ratiometric fluorescence probe for formaldehyde detection in solution and gas.

Formaldehyde (FA) is one of the most common pollutants, which has tremendous harm to humans and environment. In this work, 4-amino-3-pentene-2-one (Fluoral-p) and SiO2 coated quantum dot (QD@SiO2) were combined to implement a new ratiometric fluorescence probe QD@SiO2-Fluoral-p for FA detection. In addition, by utilization of polyvinyl alcohol (PVA) and SiO2 microsphere (SM), a kind of PVA-SM microstructure was assembled with QD@SiO2-Fluoral-p to composite a signal enhanced sensing film. The QD@SiO2-Fluoral-p exhibited good response to 0-400 mg/L FA solution and an enhancement around 15 folds was realized after introducing PVA-SM. In both situations, the probe showed linear relationship to FA concentration (CFA), with detection limits of 14 and 0.5 mg/L, respectively. Also, the sensing film showed a good linear response to FA gas in the range of 0 to 2 ppm, with a detection limit 0.03 ppm. As a result, the PVA-SM enhanced ratiometric fluorescence probe features high sensitivity, low detection limit, good selectivity, as well as portable, which can serve as a useful tool for investigating FA in solution and gas at room temperature.

Strain in perovskite solar cells: origins, impacts and regulation.

Metal halide perovskite solar cells (PSCs) have seen an extremely rapid rise in power conversion efficiencies in the past few years. However, the commercialization of this class of emerging materials still faces serious challenges, one of which is the instability against external stimuli such as moisture, heat and irradiation. Much focus has deservedly been placed on understanding the different origins of intrinsic instability and thereby enhancing their stability. Among these, tensile strain in perovskite films is an important source of instability that cannot be overcome using conventionally extrinsic stabilization approaches such as encapsulation. Here we review recent progress in the understanding of the origin of strain in perovskites as well as its corresponding characterization methods, and their impacts on the physical properties of perovskites and the performance of PSCs including efficiency and stability. We then summarize the latest advances in strain-regulation strategies that improve the intrinsic stability of perovskites and photovoltaic devices. Finally, we provide a perspective on how to make further progress in stable and high-efficiency PSCs via strain engineering.

Surface-Defect States in Photovoltaic Absorber GeSe.

GeSe is an emerging promising light-harvesting material for photovoltaics due to its excellent optoelectronic properties, nontoxic and earth-abundant constituents, and high stability. In particular, perovskite-like antibonding states at the valence band maximum arising from Ge-4s and Se-4p coupling enable the bulk-defect-tolerant properties in GeSe. However, a fundamental understanding of surface-defect states in GeSe, another important factor for high-performance photovoltaics, is still lacking. Here, we investigate the surface-defect properties of GeSe through first-principle calculations. We find that different from common semiconductors possessing numerous surface dangling bonds, some GeSe surfaces are prone to reconstruction, thus eliminating the dangling bonds. The rearranged armchair edges exhibit unexpected benign defect properties, similar to those of bulk GeSe, arising from the formation of bulk-like [GeSe3] tetrahedrons. We further show that the stable exposed (111) surfaces are hard to reconstruct due to the stiff structure but are effectively passivated by the addition of H.

Investigation of the sublimation mechanism of GeSe and GeS.

GeSe and GeS have emerged as promising light-harvesting materials for photovoltaics due to their attractive optoelectronic properties, non-toxic and earth-abundant constituents, and excellent stability. Here we unveil the diatomic molecule sublimation mechanism of GeSe and GeS that directly guides the optimization of GeSe and GeS solar-cell fabricated via the close-space sublimation method.

Corrigendum: Radiomics Analysis of Multi-Sequence MR Images For Predicting Microsatellite Instability Status Preoperatively in Rectal Cancer.

[This corrects the article DOI: 10.3389/fonc.2021.697497.].

Photothermal microfluidic-assisted self-cleaning effect for a highly reusable SERS sensor.

The synergistic integration of optofluidic and surface enhanced Raman scattering (SERS) sensing is a new analytical technique that provides a number of unique characteristics for enhancing the sensing performance and simplifying the design of microsystems. Here, we propose a reusable optofluidic SERS sensor by integrating Au nanoisland substrate (AuNIS)-coated fiber into a microfluidic chip. Through both systematic experimental and theoretical analysis, the sensor enables efficient self-cleaning based on its optical-to-heat-hydrodynamic energy conversion property. Besides, the sensor exhibits the instrument detection limit down to 10-13mol/L and enhancement factor of 106 for Rhodamine 6G. Our optofluidic SERS sensor with such a photothermal microfluidic-assisted self-cleaning method has the advantages of portability, simple operation, and high cleaning efficiency, which will provide a new, to the best of our knowledge, concept and approach for cost-effective and reusable sensors.