RESUMEN
Polyethylene (PE) mulch films are an important source of microplastics (MPs) in agricultural soils, which may further affect the bioavailability of coexisting pollutants. In this study, white (WM), black (BM), and silver-black (SM) PE mulch films were aged on the soil surface and under soil burial to simulate the two exposure patterns of abandoned mulch films in the field. Results indicated that the soil-surface exposure induced more pronounced aging characteristics, and WM seemed the most susceptible. Serious surface deterioration by aging led to a drastic decrease in the tensile properties of the films, suggesting the tendency to fragment. Oxygen-containing functional groups were generated on the film surfaces, with oxygen/carbon ratios increasing by up to 29 times, which contributed to the prominent increase in Pb adsorption on the film-derived MPs. Additionally, the film surface became more hydrophobic when exposed to the soil surface but more hydrophilic in the soil-burial exposure, which was in agreement with the change in triclosan adsorption, i.e., promotion and suppression, respectively. Aging generally decreased the desorption potential of the adsorbed pollutants in simulated gastrointestinal solutions due to increased interactions. By comparison, exposure patterns were revealed to be the critical factor for these changes, regardless of film types.
RESUMEN
The polarizations of electromagnetic (EM) waves are very important for transceivers. We propose a broadband polarization-insensitive polarization rotator (PIPR), which can realize 90° polarization rotation for incident waves with an arbitrary azimuth angle. A unit of the PIPR is composed of two types of substrate integrated waveguide (SIW) units in a checkerboard pattern, which provides more than -0.2 dB transmission from 9.5 to 10.9 GHz. The electric field inside the cavity is analyzed to explain the working mechanism of the proposed rotator. A prototype is fabricated and measured to verify the proposed design, and satisfactory agreement between simulated and measured results is achieved, indicating that the converter has potential applications in imaging and communication systems.
RESUMEN
The sorption behavior of single contaminant on microplastics (MPs) has been extensively studied; however, little is known about that in the more actual scenario containing multiple contaminants. In this study, the interaction between triclosan (TCS) and its primary metabolite, methyl triclosan (MTCS) on polyethylene (PE), polystyrene (PS), and soil was investigated. Results indicate that the more hydrophobic MTCS had much higher sorption capacity and affinity than TCS. Competitive sorption between them occurred in most cases and appeared to be concentration-dependent (in the range of 0.1-5 mg TCS/L and 0.01-≤0.05 mg MTCS/L of primary solutes, respectively): more pronounced at low concentrations of primary solute, while progressively weaker with the increase of concentrations. Among the sorbents, MTCS exhibited strong antagonistic effect on TCS sorption for MPs, especially PS, while significant suppression of MTCS sorption by TCS took place for soil and PS rather than PE. Additionally, it is interesting to observe that the presence of TCS substantially facilitated the sorption of MTCS exclusively at high concentrations on both PS and soil, presumably attributed to the solute-multilayer formation. Furthermore, the magnitude of the two effects varied with solution pH: TCS sorption at alkaline pH was the most suppressed by MTCS because the less hydrophobic dissociated TCS tended to be displaced, and the highest cooperative sorption of MTCS with TCS occurred at acidic pH because neutral TCS preferentially adsorbed on sorbent surface could provide additional sorption sites for MTCS. Both competitive and cooperative effects between multiple contaminants may affect their fate and transport, thereby these findings are helpful for assessing the environmental risk of MPs and TCS in soil.
