Functionalized Gold Nanoparticles for Facile Pattern-Controlled Surface Coatings.

Gold nanoparticles (AuNPs) have been widely investigated as surface modifiers; nevertheless, most methods still require the pretreatment of surfaces and several steps to control coating efficiency and patterns for improved functionality. We developed functionalized AuNPs through borate-protected dopamine (B-AuNPs). The simple activation of B-AuNPs with a strong acid to remove the protected borate groups produces adhesive dopamine AuNPs (D-AuNPs). D-AuNP-coated surfaces with varied but controlled features and properties such as coating density and surface pattern were achieved using D-AuNPs with a precisely controlled dopamine density and coating conditions. Such adhesive and easily manipulated AuNPs provide a facile and time-saving technology to achieve sophisticated surface coatings using AuNPs.

Microalgal-bacterial consortia for the treatment of livestock wastewater: Removal of pollutants, interaction mechanisms, influencing factors, and prospects for application.

The livestock sector is responsible for a significant amount of wastewater globally. The microalgal-bacterial consortium (MBC) treatment has gained increasing attention as it is able to eliminate pollutants to yield value-added microalgal products. This review offers a critical discussion of the source of pollutants from livestock wastewater and the environmental impact of these pollutants. It also discusses the interactions between microalgae and bacteria in treatment systems and natural habitats in detail. The effects on MBC on the removal of various pollutants (conventional and emerging) are highlighted, focusing specifically on analysis of the removal mechanisms. Notably, the various influencing factors are classified into internal, external, and operating factors, and the mutual feedback relationships between them and the target (removal efficiency and biomass) have been thoroughly analysed. Finally, a wastewater recycling treatment model based on MBC is proposed for the construction of a green livestock farm, and the application value of various microalgal products has been analysed. The overall aim was to indicate that the use of MBC can provide cost-effective and eco-friendly approaches for the treatment of livestock wastewater, thereby advancing the path toward a promising microalgal-bacterial-based technology.

Chromosome-Level Assembly and Comparative Genomic Analysis of Suillus bovinus Provides Insights into the Mechanism of Mycorrhizal Symbiosis.

Suillus bovinus is a wild edible ectomycorrhizal fungus with important economic and ecological value, which often forms an ectomycorrhiza with pine trees. We know little about the mechanisms associated with the metabolism and symbiosis of S. bovinus and its effects on the nutritional value. In this study, the whole-genome sequencing of S. bovinus was performed using Illumina, HiFi, and Hi-C technologies, and the sequencing data were subjected to genome assembly, gene prediction, and functional annotation to obtain a high-quality chromosome-level genome of S. bovinus. The final assembly of the S. bovinus genome includes 12 chromosomes, with a total length of 43.03 Mb, a GC content of 46.58%, and a contig N50 size of 3.78 Mb. A total of 11,199 coding protein sequences were predicted from genome annotation. The S. bovinus genome contains a large number of small secreted proteins (SSPs) and genes that encode enzymes related to carbohydrates, as well as genes related to terpenoids, auxin, and lipochitooligosaccharides. These genes may contribute to symbiotic processes. The whole-genome sequencing and genetic information provide a theoretical basis for a deeper understanding of the mechanism of the mycorrhizal symbiosis of S. bovinus and can serve as a reference for comparative genomics of ectomycorrhizal fungi.

First Report of Pseudoidium santalacearum Causing Foliar Powdery Mildew on Santalum album in Guangdong Province, China.

Santalum album Linn is an evergreen and facultative root hemiparasitic tree. It is attached to host roots through haustorium to withdraw water and nutrients. Its aromatic heartwood, honored as "Green Gold", is widely used in perfumes, incense, medicine, and skin cancer prevention (Sandeep and Manohara 2019, Polaiah et al. 2020). From February to June 2022, powdery mildew was observed on over 80% of S. album in the nursery with a mean temperature and relative humidity of 30/22°C (day/night) and 55/82% (day/night) at the Research Institute of Tropical Forestry, Chinese Academy of Forestry, Guangdong, China (23°11'N, 113°23'E). Initial symptoms were circular to irregular white colonies on the leaf surface (Fig. 1). As the disease progressed, white mycelia covered the entire leaf surface and premature defoliation of the infected leaf was observed. Then a bare stem remained and subsequently desiccated (Sundararaj et al. 2022). Infected leaves with mycelia were collected and observed under a Zeiss AX10 microscope. Foot cells of conidiophores (n = 30) were straight to slightly curved cylindrical, and the length and width of foot cells were up to 24.8 to 44.6 × 8.2 to 11.7 µm. Conidiophores (n = 30) were straight, 83.5 to 127.3 µm long × 6.6 to 7.6 µm wide and produced three immature conidia in chains. Conidia (n = 30) were elliptical to cylindrical, measured 31.3 to 41.2 µm × 11.3 to 13.7 µm. The sexual stage was not found. The morphological characterization of our samples was consistent with powdery mildew of S. album in India, termed Pseudoidium santalacearum (Patel et al. 2015). However, the molecular identification was not performed. In this study, we carefully collected the mildew and extracted the genomic DNA. The internal transcribed spacer (ITS) region of rDNA was amplified using universal primers ITS1 and ITS4 (White et al. 1990). The ITS sequences of the three samples (GenBank Accession No. OQ746371, OQ746372, and OQ746373) were all more than 99% identical with the sequence of Erysiphe palczewskii on Caragana arborescens (GenBank Accession No. LC010048) (Takamatsu et al. 2015). It is known that Erysiphe containing chasmothecia belongs to teleomorph, whereas Pseudoidium is an asexual morph of Erysiphe, belonging to anamorph (Hsiao et al. 2022, Meeboon and Takamatsu 2016). In our samples, there was no chasmothecia, and the morphological characterization was consistent with P. santalacearum (Patel et al. 2015). Therefore, we classified it as P. santalacearum. Phylogenetic analysis showed that P. santalacearum had a closer relationship with the E. palczewskii (Fig. 2). Pathogenicity tests were conducted by gently pressing the infected leaves onto five healthy S. album plants. Five non-inoculated plants were used as controls. The plants were placed in a growth chamber (Light/Dark: 16 h/8 h, temperature: 25 ± 2°C). Inoculated leaves developed powdery mildew symptoms after 7-12 days, whereas the control plants remained symptomless (Fig. 1). Morphological and molecular characters of the fungus on the inoculated plants were identical to those on naturally infected S. album, fulfilling Koch's postulates. To our knowledge, this is the first report of P. santalacearum on S. album in Guangdong, China. Powdery mildew can generally result in a high mortality of S. album seedlings. Therefore, identification of the pathogen provides a scientific basis for effective diagnosis and prevention of the disease and contribute to an appropriate nursery management of S. album seedlings.

Nitrogen rather than carbon released by litter decomposition mediates nutrient relationships in a multispecies forest plantation with hemiparasite.

Hemiparasitic plants influence community composition by altering nutrient cycling. Although hemiparasites can deplete a host's nutrients via parasitism, their potentially positive effects on nutrient return to multispecies communities remain unclear. We used 13C/15N-enriched leaf litter of the hemiparasite sandalwood (Santalum album, Sa) and two N2-fixing hosts of acacia (Acacia confusa, Ac) and rosewood (Dalbergia odorifera, Do), either as a single-species or mixed-species litter, to elucidate nutrient return by litter decomposition in an acacia-rosewood-sandalwood mixed plantation. We determined litter decomposition rates, litter C and N release, and the resorption of C and N from seven litter types (Ac, Do, Sa, AcDo, AcSa, DoSa, and AcDoSa) at 90, 180, 270, and 360 days. We found that non-additive mixing effects were common during the decomposition of mixed litter and depended on litter type and decomposition timing. After rapidly increasing for around 180 days, both the decomposition rate and release of C and N from litter decomposition declined, but the resorption of litter-released N by the target tree species increased. There was a 90-day lag time between the release and resorption of litter N. Sandalwood litter consistently stimulated the litter mass loss of its mixed litter. Rosewood had the highest release rate of litter 13C or 15N from litter decomposition, but resorbed more litter 15N into its leaves than other tree species. In contrast, acacia had a lower decomposition rate and a higher 15N resorption in its roots. Initial litter quality was closely correlated with the release of litter 15N. Neither the release nor resorption of litter 13C significantly differed among sandalwood, rosewood, and acacia. Our study demonstrates that the fate of litter N, rather than litter C, mediates nutrient relationships in mixed sandalwood plantations and thus provides important silvicultural implications for planting sandalwood with other host species.

Finite Element Modeling of Residual Hearing after Cochlear Implant Surgery in Chinchillas.

Cochlear implant (CI) surgery is one of the most utilized treatments for severe hearing loss. However, the effects of a successful scala tympani insertion on the mechanics of hearing are not yet fully understood. This paper presents a finite element (FE) model of the chinchilla inner ear for studying the interrelationship between the mechanical function and the insertion angle of a CI electrode. This FE model includes a three-chambered cochlea and full vestibular system, accomplished using µ-MRI and µ-CT scanning technologies. This model's first application found minimal loss of residual hearing due to insertion angle after CI surgery, and this indicates that it is a reliable and helpful tool for future applications in CI design, surgical planning, and stimuli setup.

Changes in choroidal thickness in myopic children with 0.01% atropine: Evidence from a 12-month follow-up.

PURPOSE: To investigate the changes of low-dose atropine (0.01%) on the choroidal thickness (ChT) of young children with low myopia. METHODS: A total of 25 eyes of 25 low myopic children were included. All subjects were prescribed 0.01% atropine eye drops to be applied once per night before bedtime in involving eyes. The ChT and ocular biometry parameters were measured before and after 1 month, 3 months, 6 months and 12 months. The children were followed up for 12 months. RESULTS: At 3 months, the ChT under the fovea significantly increased (309.96±70.82 µm) in comparison with the baseline (297.92±66.31 µm, P<0.0001) and was continuous thickening till 12 months after treatments with 0.01% atropine. Similarly, the changes of ChT under the fovea significantly increased from baseline to 3 months in comparison with the baseline to 1 month after treatments (P<0.0001). There was a significant relationship between changes in subfoveal ChT and central cornea thickness (CCT, beta=-1.76, 95% confidence intervals: -3.49 to -0.04, P = 0.045). CONCLUSIONS: Using low dose atropine eye drops significantly increased subfoveal ChT after 3 months in eyes of myopic children. In addition, the changes in subfoveal ChT may be associated with the changes of CCT.

Fabrication of Temperature Sensors with High-Performance Uniformity through Thermal Annealing.

It is considered to be of great significance to monitor human health and track the effect of drugs by measuring human temperature mapping through flexible temperature sensors. In this work, we found that the thermal annealing of flexible temperature sensors based on graphite-acrylate copolymer composites can not only improve the temperature coefficient of resistance (TCR) values of the devices, but also greatly improve the uniformity of the performance of the devices prepared in parallel. The best results were obtained when the devices were annealed at 100 °C, which is believed to be due to the rearrangement of graphite particles to generate more uniform and numerous conductive channels within the conductive composite. We believe this finding might promote the practical development of flexible temperature sensors in body temperature sensing for health maintenance and medical applications.

Advanced 1D Metal-Organic Coordination Polymer for Lithium-Ion Batteries: Designing, Synthesis, and Working Mechanism.

Anthraquinone (AQ) and its derivatives have been attracting more attention as promising electrode materials for lithium storage because of their high specific capacity, structural diversity, and environmental friendliness. The dissolution and poor electrical conductivity of AQ, however, limit its practical application. Here, a novel metal-organic coordination polymer with a one-dimensional (1D) chain ([C14H6O4Cu]n denoted as Cu-DHAQ; DHAQ, 1,5-dihydroxyl anthraquinone) and its composite with graphene (Cu-DHAQ/G; G, graphene) are developed by the introduction of graphene and copper ion into DHAQ. The fabricated polymer with a 1D chain not only well inhibits the dissolution of DHAQ in organic electrolytes but also facilitates lithium-ion insertion/extraction on carbonyl groups and shortens the migration path of lithium ions. Furthermore, the addition of the conductive network of graphene provides fast transfer rates of electrons. As a result, Cu-DHAQ/G delivers a high discharge capacity, long cycle life, and excellent rate capability. The lithium storage mechanism shows lithium ion insertion/extraction on two carbonyl groups of Cu-DHAQ in the range of 1.6-2.0 V and the redox reaction of Cu+/Cu2+ between 2.8 and 3.0 V, and Cu2+ and Cu+ coexist in the Cu-DHAQ/G electrode during the charge/discharge process. This study provides meaningful guidance to develop metal-organic coordination polymer electrodes for high-performance Li-ion batteries.

Host root exudates initiate a foraging preference by the root parasite Santalum album.

Haustoria of root-parasitic plants draw nutrients from the roots of host species. While recent studies have assessed host preferences of parasitic plants, how root-exuded chemicals can mediate host tropism and selection by root-parasitic plants is poorly understood. Under greenhouse conditions, we performed two pot experiments to determine whether the root parasite Santalum album selectively forages for superior hosts (N2-fixing Acacia confusa Merr. or Dalbergia odorifera T. Chen) rather than for inferior hosts (non-N2-fixing Bischofia polycarpa (levl.) Airy Shaw or Dracontomelon duperreranum Pierre), and whether S. album uses host root exudates and/or specific chemicals in these root exudates to locate and trigger haustorium formation. Lateral roots and haustoria of S. album seedlings exhibited greater growth in the direction of D. odorifera roots than toward roots from the other three hosts. Comparative metabolic analysis revealed that D. odorifera root exudates were enriched in isoflavonoid, flavonoid and flavone/flavonol biosynthesis pathways, and that the relative contents of flavonoids were significantly greater in the root exudates of D. odorifera than in those of the other three hosts. Root exudates from D. odorifera significantly promoted S. album root growth, haustorium formation and reactive oxygen species accumulation in haustoria. Our results demonstrate that the key step in plant parasitism by S. album is based on root exudation by a host plant; the exudates function as a metabolite signal that activate lateral root growth and haustorium formation. Our results also indicate that flavonoids in the root exudates could play an important role in S. album foraging activity. Information on the responses of root parasites to host root exudates and/or haustorium-inducing chemicals may be useful for selecting superior host species to plant with valuable species of root parasites.

Facile Synthesis of a LiC15H7O4/Graphene Nanocomposite as a High-Property Organic Cathode for Lithium-Ion Batteries.

Organic electrode materials face two outstanding issues in the practical applications in lithium-ion batteries (LIBs), dissolution and poor electronic conductivity. Herein, we fabricate a nanocomposite of an anthraquinone carboxylate lithium salt (LiAQC) and graphene to address the two issues. LiAQC is synthesized via a green and facile one-pot reaction and then ball-milled with graphene to obtain a nanocomposite (nr-LiAQC/G). For comparison, single LiAQC is also ball-milled to form a nanorod (nr-LiAQC). Together with pristine LiAQC, the three samples are used as cathodes for LIBs. Results show that good cycling performance can be obtained by introducing the -CO2Li hydrophilic group on anthraquinone. Furthermore, the nr-LiAQC/G demonstrates not only a high initial discharge capacity of 187 mAh g-1 at 0.1 C but also good cycling stability (reversible capacity: ∼165 mAh g-1 at 0.1 C after 200 cycles) and good rate capability (the average discharge capacity of 149 mAh g-1 at 2 C). The superior electrochemical properties of the nr-LiAQC/G profit from graphene with high electronic conductivity, the nanorod structure of LiAQC shortening the transport distance for lithium ions and electrons, and the introduction of the -CO2Li hydrophilic group decreasing the dissolution of LiAQC in the electrolyte. Meanwhile, density functional theory calculations support the roles of graphene and -CO2Li groups. The fabrication is general and facile, ready to be extended to other organic electrode materials.

The mitochondrial genome of a wild edible mushroom, Russula rosea.

Russula rosea is a common wild edible ectomycorrhizal fungus, which is widely distributed all over the world. We assembled the complete mitochondrial genome of R. rosea with the total length was 54177 bp and the GC content of 22.34%. It contains a total of 57 genes, including 14 standard protein-coding genes, one conserved ribosomal protein S3 gene (rps3), two rRNA genes, 24 tRNA genes, 15 free-standing open reading frames (ORFs) and one DNA polymerase gene (dpo). Mitochondrial genome found a close evolutionary relationship between Russula rosea and Russula lepida, which was helpful to study the genetic evolutionary relationship of edible fungi.

Tunable Properties of Polydopamine Nanoparticles and Coated Surfaces.

Polydopamine (PDA) nanoparticles and PDA-coated surfaces have wide applications due to PDA's unique reactivity and efficient coating ability on nearly any surface. However, challenges in manipulating and controlling dopamine polymerization and thus the PDA nanoparticle formations and surface coatings still exist. Here, dopamine with a tetraborate (borax)-protected catechol group was utilized to tune the properties of PDA nanoparticles and PDA coatings. This method allows us to (1) synthesize PDA nanoparticles with a narrow size distribution and low aggregation and (2) create surface coating with the desired PDA layer thickness and varying water contact angles. PDA nanoparticles and PDA-coated surfaces of varying but tunable chemical and physical properties will find wide applications. For example, such PDA-coated surfaces were successfully used to construct Ag nanoparticle patterned surfaces with varying Ag particle sizes and densities.

Morphological Characters and Molecular Phylogeny Reveal Three New Species of Subgenus Russula from China.

Three new species are described and illustrated here based on morphological evidence and phylogenetic analysis from China. Russula leucomarginata is recognized by a yellowish red to reddish brown pileus center, a yellowish white to reddish white and sometimes cracked margin, and a reddish white to pastel pink stipe. Russula roseola is characterized by its reddish white to ruby red pileus center, pink to rose margin, adnate to slightly decurrent lamellae with unequal-length lamellulae, reddish white to pink stipe, and occasionally three-celled pileocystidia. Russula subsanguinaria is morphologically characterized by a reddish brown to dark brown pileus center, a reddish orange to brownish red margin with striation, a reddish white to pink stipe with an expanded base, basidiospores with moderately distant to dense amyloid warts, and hymenial cystidia turning to reddish black in SV. In this study, we performed phylogenetic analysis based on ITS sequence and 28S-RPB1-RPB2-mtSSU datasets. Detailed morphological features and phylogenetic analysis indicate that these three new species belong to Russula subg. Russula.

A comprehensive finite element model for studying Cochlear-Vestibular interaction.

We present a 3-D finite element (FE) model of the chinchilla's inner ear consisting of the entire cochlea structure and the vestibular system. The reaction of the basilar membrane to the head rotation and the reaction of ampulla to the stapes movement were investigated. These results demonstrate the existence of hearing-vestibular system interaction. They provide an explanation to the clinical finding on the coexistence between hearing loss and equilibration dysfunction. It is a preliminary, yet critical step toward the development of a comprehensive FE model of an entire ear for mechano-acoustic analysis.

Morphological Characteristics and Molecular Evidence Reveal four New Species of Russula subg. Brevipedum from China.

In this study, four new species of Russula subg. Brevipedum collected from China are described based on morphological characteristics and molecular evidence. Russula brevispora has a white body whose whole parts often stain brownish-orange or grayish-orange, extremely crowded lamellae with the presence of lamellulae, basidiospores with low warts and an inamyloid suprahilar spot, and clavate or lageniform hymenial cystidia often with a papillary or submoniliform appendage. Russula flavescens is characterized by a white pileus often turning yellowish brown when touched, white lamellae turning brown or light orange, basidiospores with an inamyloid suprahilar spot, and fusiform hymenial cystidia often with an appendage. Russula longicollis is morphologically characterized by a white pileus, turning grayish orange when bruised, white lamellae turning pale yellow when bruised, basidiospores with isolated warts and an amyloid suprahilar spot, and fusiform hymenial cystidia usually with a long appendage. Russula pseudojaponica has a yellowish-brown pileus center, yellowish lamellae unchanging when bruised, basidiospores with low warts and an inamyloid suprahilar spot, clavate hymenial cystidia often with a papillary appendage, and clavate pileocystidia with granulose contents. Phylogenetic analyses showed that R. flavescens, R. brevispora, and R. pseudojaponica are members of the subsect. Pallidosporinae, whereas R. longicollis belongs to subsect. Lactarioideae, and is somewhat related to R. leucocarpa.

A novel 3D video oculography system for measuring cross-axis vestibulo-ocular reflex.

We present a video oculography (VOG) system with 6-degree-of-freedom (6-DOF) mobility for real-time measurements of the binocular 3D eye position of a small animal. A hybrid hexapod that allowed for multi-axis complex motions with the resolution of the microscopic level was used to control the motion of the animal. The instantaneous eyeball movement of the animal was determined based on two approaches: (1) tracking of marker arrays affixed to the cornea; and (2) tracking the pupil outline. The tracking of the eyeball movement and the motion control of the hexapod were implemented with the LabVIEW virtual instruments. Compared with our previous measurements using a servo-motor-based single-axis VOG system, positional error reduced from more than 4% to less than 0.7%. Validation showed that the tracking errors in three rotational axes are less than 2% for the magnitude and less than 5° for the direction angle. The present VOG system is an effective tool for cross-axis 3D vestibulo-ocular reflex study on small animals.

Morphological and phylogenetic evidence for two new species of Russula subg. Heterophyllidia from Guangdong Province of China.

Two new species of Russulasubg.Heterophyllidia from Guangdong Province of China were described and illustrated based on morphological characters, and their identity supported by molecular phylogeny. R.luofuensis is morphologically characterized by a grayish yellow to brownish orange pileus center with a purplish gray to grayish magenta margin, a surface that is cracked and broken into small golden-brown patches, subglobose to broadly ellipsoid basidiospores with warts fused in short or long chains and a suprapellis composed of hyphal extremities with inflated, ellipsoid or globose cells and attenuated terminal cell. R.subbubalina is distinguished by the blanched almond to dark salmon pileus that is cracked with age, subglobose to broadly ellipsoid basidiospores with wart fused in short or long chains and frequently connected by line connections, a suprapellis with hyphal ends composed of inflated or ellipsoid cells and attenuated terminal cell, and pileocystidia that are mainly clavate and sometimes with round or ellipsoid appendage. The phylogenetic analyses based on ITS-nrLSU-mtSSU-TEF1 dataset were performed using maximum likelihood and Bayesian analysis. In terms of morphological features and molecular data, the former species belongs to subsect. Virescentinae, whereas the latter comes under subsect. Heterophyllinae.

Tracking antibiotic resistance genes (ARGs) during earthworm conversion of cow dung in northern China.

Using cow dung to breed earthworms poses a risk of environmental transmission of antibiotic resistance genes (ARGs). The purpose of this study was to address the occurrence, persistence and environmental fate of ARGs during earthworm conversion of cow dung. The results showed that ARGs persisted through the whole process. Notably, earthworm conversion effectively reduced some ARGs in cow dung, but a definite concentration of ARGs still remained in earthworms and vermicompost (up to 10-1 and 10-2 copies/16S copies, respectively). We found that tet-ARGs were the most abundant in 15 earthworm farms (10-6~10-1 copies/16S copies) and some high-risk ARGs (i.e., blaampC, blaOXA-1 and blaTEM-1) were even prevalent in these farms. Interestingly, although ARGs differ widely in cow dung (10-10~10-1 copies/16S copies), the ARGs levels were comparable in vermicompost samples from different farms (10-8~10-2 copies/16S copies). Notably, earthworm conversion effectively reduced some ARGs in cow dung, but significant level of ARGs still remained in earthworms and vermicompost (up to 10-1 and 10-2 copies/16S copies, respectively). Nevertheless, the concentrations of some heavy metals (Cu, Zn and Ni), the abundance of mobile genetic elements (MGEs) and total nitrogen content were confirmed to be correlated to the enrichment of some ARGs. Overall, this study demonstrated the high prevalence of ARGs contamination in earthworm farms, and also highlighted the dissemination risk of ARGs during the earthworm conversion of cow dung.

Prevention of Blast-induced Auditory Injury Using 3D Printed Helmet and Hearing Protection Device - A Preliminary Study on Biomechanical Modeling and Animal.

INTRODUCTION: Repeated blast exposures result in structural damage to the peripheral auditory system (PAS) and the central auditory system (CAS). However, it is difficult to differentiate injuries between two distinct pathways: the mechanical damage in the PAS caused by blast pressure waves transmitted through the ear and the damage in the CAS caused by blast wave impacts on the head or traumatic brain injury. This article reports a preliminary study using a 3D printed chinchilla "helmet" as a head protection device associated with the hearing protection devices (e.g., earplugs) to isolate the CAS damage from the PAS injuries under repeated blast exposures. MATERIALS AND METHODS: A finite element (FE) model of the chinchilla helmet was created based on micro-computed tomography images of a chinchilla skull and inputted into ANSYS for FE analysis on the helmet's protection against blast over pressure. The helmet was then 3D printed and used for animal experiments. Chinchillas were divided into four cases (ears open, with earplug only, with both earplug and helmet, and with helmet only) and exposed to three blasts at blast over pressure of 15 to 20 psi. Hearing function tests (e.g., auditory brainstem response) were performed before and after blast on Day 1 and Days 4 and 7 after blasts. RESULTS: The FE model simulation showed a significant reduction in intracranial stress with the helmet, and the animal results indicated that both earplug and helmet reduced the severity of blast-induced auditory injuries by approximately 20 dB but with different mechanisms. CONCLUSIONS: The biomechanical modeling and animal experiments demonstrated that this four-case study in chinchillas with helmet and hearing protection devices provides a novel methodology to investigate the blast-induced damage in the PAS and CAS.