Associations between solar and geomagnetic activity and cognitive function in the Normative Aging study.

BACKGROUND: Studies show that changes in solar and geomagnetic activity (SGA) influence melatonin secretion and the autonomic nervous system. We evaluated associations between solar and geomagnetic activity and cognitive function in the Normative Aging Study from 1992 to 2013. METHODS: We used logistic and linear generalized estimating equations and regressions to evaluate the associations between moving averages of sunspot number (SSN) and Kp index (a measure of geomagnetic activity) and a binary measure for Mini-Mental State Examination (MMSE) scores (≤25 or > 25) and six other cognitive tests as continuous measures, combined into one global composite score and considered separately. RESULTS: A one-IQR increase in same-day SSN and Kp index were associated with 17% (95% CI: 3%, 34%) and 19% (95% CI: 4%, 36%) increases in the odds of low MMSE score. We observed small increases in the global cognitive score with increasing SSN, although we observed decreases specifically in relation to the backwards digit span test. CONCLUSIONS: Periods of high SGA were associated with cognitive function. SGA may not equally impact all aspects of cognitive function, as evidenced by differences in associations observed for the MMSE, global cognitive score, and individual cognitive tests. Given that much of the pathology of cognitive decline in the elderly remains unexplained, studies specifically targeting decline and with longer follow-up periods are warranted.

Sociodemographic Factors Are Associated with the Abundance of PFAS Sources and Detection in U.S. Community Water Systems.

Drinking water contaminated by per- and polyfluoroalkyl substances (PFAS) is a widespread public health concern, and exposure-response relationships are known to vary across sociodemographic groups. However, research on disparities in drinking water PFAS exposures and the siting of PFAS sources in marginalized communities is limited. Here, we use monitoring data from 7873 U.S. community water systems (CWS) in 18 states to show that PFAS detection is positively associated with the number of PFAS sources and proportions of people of color who are served by these water systems. Each additional industrial facility, military fire training area, and airport in a CWS watershed was associated with a 10-108% increase in perfluorooctanoic acid and a 20-34% increase in perfluorooctane sulfonic acid in drinking water. Waste sector sources were also significantly associated with drinking water PFAS concentrations. CWS watersheds with PFAS sources served higher proportions of Hispanic/Latino and non-Hispanic Black residents compared to those without PFAS sources. CWS serving higher proportions of Hispanic/Latino and non-Hispanic Black residents had significantly increased odds of detecting several PFAS. This likely reflects disparities in the siting of PFAS contamination sources. Results of this work suggest that addressing environmental justice concerns should be a component of risk mitigation planning for areas affected by drinking water PFAS contamination.

Effects of portable air cleaners and A/C unit fans on classroom concentrations of particulate matter in a non-urban elementary school.

Given the increased use of air cleaners as a prevention measure in classrooms during the COVID-19 pandemic, this study aimed to investigate the effects of portable air cleaners with HEPA filters and window A/C fans on real-time (1 minute) concentrations of PM less than 2.5 microns (PM2.5) or less than 1 microns (PM1.0) in two classrooms in a non-urban elementary school in Rhode Island. For half of each school day, settings were randomized to "high" or "low" for the air cleaner and "on" or "off" for the fan. Descriptive statistics and linear mixed models were used to evaluate the impacts of each set of conditions on PM2.5 and PM1.0 concentrations. The mean half-day concentrations ranged from 3.4-4.1 µg/m3 for PM2.5 and 3.4-3.9 µg/m3 for PM1.0. On average, use of the fan when the air cleaner was on the low setting decreased PM2.5 by 0.53 µg/m3 [95% CI: -0.64, -0.42] and use of the filter on high (compared to low) when the fan was off decreased PM2.5 by 0.10 µg/m3 [95% CI: -0.20, 0.005]. For PM1.0, use of the fan when the air cleaner was on low decreased concentrations by 0.18 µg/m3 [95% CI: -0.36, -0.01] and use of the filter on high (compared to low) when the fan was off decreased concentrations by 0.38 µg/m3 [95% CI: -0.55, -0.21]. In general, simultaneous use of the fan and filter on high did not result in additional decreases in PM concentrations compared to the simple addition of each appliance's individual effect estimates. Our study suggests that concurrent or separate use of an A/C fan and air cleaner in non-urban classrooms with low background PM may reduce classroom PM concentrations.

The Respiratory Risks of Ambient/Outdoor Air Pollution.

Globally, exposure to ambient air pollutants is responsible for premature mortality and is implicated in the development and exacerbation of several acute and chronic lung disease across all ages. In this article, we discuss the source apportionment of ambient pollutants and the respiratory health effects in humans. We specifically discuss the evidence supporting ambient pollution in the development of asthma and chronic obstructive pulmonary disease and acute exacerbations of each condition. Practical advice is given to health care providers in how to promote a healthy environment and advise patients with chronic conditions to avoid unsafe air quality.

Tap Water Contributions to Plasma Concentrations of Poly- and Perfluoroalkyl Substances (PFAS) in a Nationwide Prospective Cohort of U.S. Women.

BACKGROUND: Between 2013 and 2015, concentrations of poly- and perfluoroalkyl substances (PFAS) in public drinking water supplies serving at least six million individuals exceeded the level set forth in the health advisory established by the U.S. Environmental Protection Agency. Other than data reported for contaminated sites, no systematic or prospective data exist on the relative source contribution (RSC) of drinking water to human PFAS exposures. OBJECTIVES: This study estimates the RSC of tap water to overall PFAS exposure among members of the general U.S. METHODS: We measured concentrations of 15 PFAS in home tap water samples collected in 1989-1990 from 225 participants in a nationwide prospective cohort of U.S. women: the Nurses' Health Study (NHS). We used a one-compartment toxicokinetic model to estimate plasma concentrations corresponding to tap water intake of PFAS. We compared modeled results with measured plasma PFAS concentrations among a subset of 110 NHS participants. RESULTS: Tap water perfluorooctanoic acid (PFOA) and perfluorononanoic acid (PFNA) were statistically significant predictors of plasma concentrations among individuals who consumed [Formula: see text] cups of tap water per day. Modeled median contributions of tap water to measured plasma concentrations were: PFOA 12% (95% probability interval 11%-14%), PFNA 13% (8.7%-21%), linear perfluorooctanesulfonic acid (nPFOS) 2.2% (2.0%-2.5%), branched perfluorooctanesulfonic acid (brPFOS) 3.0% (2.5%-3.2%), and perfluorohexanesulfonic acid (PFHxS) 34% (29%-39%). In five locations, comparisons of PFASs in community tap water collected in the period 2013-2016 with samples from 1989-1990 indicated increases in quantifiable PFAS and extractable organic fluorine (a proxy for unquantified PFAS). CONCLUSIONS: Our results for 1989-1990 compare well with the default RSC of 20% used in risk assessments for legacy PFAS by many agencies. Future evaluation of drinking water exposures should incorporate emerging PFAS. https://doi.org/10.1289/EHP4093.

Programmatic conversion of crystal structures into 3D printable files using Jmol.

BACKGROUND: Three-dimensional (3D) printed crystal structures are useful for chemistry teaching and research. Current manual methods of converting crystal structures into 3D printable files are time-consuming and tedious. To overcome this limitation, we developed a programmatic method that allows for facile conversion of thousands of crystal structures directly into 3D printable files. RESULTS: A collection of over 30,000 crystal structures in crystallographic information file (CIF) format from the Crystallography Open Database (COD) were programmatically converted into 3D printable files (VRML format) using Jmol scripting. The resulting data file conversion of the 30,000 CIFs proceeded as expected, however some inconsistencies and unintended results were observed with co-crystallized structures, racemic mixtures, and structures with large counterions that led to 3D printable files not containing the desired chemical structure. Potential solutions to these challenges are considered and discussed. Further, a searchable Jmol 3D Print website was created that allows users to both discover the 3D file dataset created in this work and create custom 3D printable files for any structure in the COD. CONCLUSIONS: Over 30,000 crystal structures were programmatically converted into 3D printable files, allowing users to have quick access to a sizable collection of 3D printable crystal structures. Further, any crystal structure (>350,000) in the COD can now be conveniently converted into 3D printable file formats using the Jmol 3D Print website created in this work. The 3D Print website also allows users to convert their own CIFs into 3D printable files. 3D file data, scripts, and the Jmol 3D Print website are provided openly to the community in an effort to promote discovery and use of 3D printable crystal structures. The 3D file dataset and Jmol 3D Print website will find wide use with researchers and educators seeking to 3D print chemical structures, while the scripts will be useful for programmatically converting large database collections of crystal structures into 3D printable files.