A Metatitanic Acid Particulate Xerogel: Green Synthesis, Structure Determination, and Detailed Characterization.

The manuscript focuses on an original method of preparation of metatitanic acid when only environmentally safe base substances are used in the synthesis process. The synthesis is based on the reaction of solid titanyl sulfate in an aqueous solution of sodium hydroxide. This method allows for (i) a full preservation of the morphology of the starting titanyl sulfate and (ii) a preparation of metatitanic acid substances with specific parameters. This can be achieved via a precise control of the alkali metal/titanyl sulfate ratio resulting in substances with varying contents of alkali metals or even sulfate anions. The prepared metatitanic acid then also contains very small weakly crystalline particles (2-3 nm) and forms pseudomorphic aggregates whose shape and dimensions correspond to those of the starting titanyl sulfate. These aggregates exhibit regular nanoporosity with a high surface area of up to 500 m2·g-1, have no tendency to form colloids, and are mechanically highly resistant even by high-energy ultrasound. The characterization of the resulting products is done via their chemical composition and methods of structural analysis, as well as by electron microscopy and local analysis. The mechanism of product formation is discussed based on the structure of the precursor, including the so far unknown structure of metatitanic acid.

Highly efficient eco-friendly sodium titanate sorbents of Cs(i), Sr(ii), Co(ii) and Eu(iii): synthesis, characterization and detailed adsorption study.

Development of useful all-around materials which can quickly and efficiently adsorb radionuclides in response to environmental radioactive contamination is an urgent research objective. In response to this need, our team developed a simple preparation method for stable sodium titanates which can serve as efficient agents for removal of radionuclides from water. With an emphasis on an environmentally friendly synthesis, the resulting materials were defined by a range of means and methods measuring e.g. pH, ionic strength, contact time or metal ion concentration in order to assess their potential for use and applications as sorbents. The data obtained from measurements revealed rapid removal kinetics (up to 10 minutes), wide range of pH use and high equilibrium capacity. The maximum amount of adsorbed ions as calculated from the Langmuir isotherm was equal to 206.3 mg g-1 for Cs(i), 60.0 mg g-1 for Sr(ii), 50.2 mg g-1 for Co(ii) and 103.4 mg g-1 for Eu(iii), significantly exceeding published data obtained with related materials. The removal mechanism is most likely ion exchange followed by complexation reactions, as indicated by TEM/EDS analyses. Given their extraordinary sorption capacity and facile synthesis under mild conditions, these materials are promising candidates for the efficient removal of radionuclides from aqueous solutions during the clean-up of radioactive pollution in the environment.

Optimization of Chemical Bonding through Defect Formation and Ordering─The Case of Mg7Pt4Ge4.

The new phase Mg7Pt4Ge4 (≡Mg8□1Pt4Ge4; □ = vacancy) was prepared by reacting a mixture of the corresponding elements at high temperatures. According to single crystal X-ray diffraction data, it adopts a defect variant of the lighter analogue Mg2PtSi (≡Mg8Pt4Si4), reported in the Li2CuAs structure. An ordering of the Mg vacancies results in a stoichiometric phase, Mg7Pt4Ge4. However, the high content of Mg vacancies results in a violation of the 18-valence electron rule, which appears to hold for Mg2PtSi. First principle density functional theory calculations on a hypothetical, vacancy-free "Mg2PtGe" reveal potential electronic instabilities at EF in the band structure and significant occupancy of states with an antibonding character resulting from unfavorable Pt-Ge interactions. These antibonding interactions can be eliminated through introduction of Mg defects, which reduce the valence electron count, leaving the antibonding states empty. Mg itself does not participate in these interactions. Instead, the Mg contribution to the overall bonding comes from electron back-donation from the (Pt, Ge) anionic network to Mg cations. These findings may help to understand how the interplay of structural and electronic factors leads to the "hydrogen pump effect" observed in the closely related Mg3Pt, for which the electronic band structure shows a significant amount of unoccupied bonding states, indicating an electron deficient system.

A di­iron(III) µ-oxido complex as catalyst precursor in the oxidation of alkanes and alkenes.

The oxido-bridged diiron(III) complex [Fe2(µ-O)(µ-OAc)(DPEAMP)2](OCH3) (1), based on a new unsymmetrical ligand with an N4O donor set, viz. [2-((bis(pyridin-2-ylmethyl)amino)methyl)-6-((ethylamino)methyl)-4-methylphenol (HDPEAMP)], has been prepared and characterized by spectroscopic methods and X-ray crystallography. The crystal structure of the complex reveals that each Fe(III) ion is coordinated by three nitrogen and three oxygen donors, two of which are the bridging oxido and acetate ligands. Employing H2O2 as a terminal oxidant, 1 is capable of oxidizing a number of alkanes and alkenes with high activity. The catalytic oxidation of 1,2-dimethylcyclohexane results in excellent retention of configuration. Monitoring of the reaction of 1 with H2O2 and acetic acid in the absence of substrate, using low-temperature UV-Vis spectroscopy, suggests the in situ formation of a transient Fe(III)2-peroxido species. While the selectivity and nature of oxidation products implicate a high-valent iron-oxido complex as a key intermediate, the low alcohol/ketone ratios suggest a simultaneous radical-based process.

Structure and stability of γ1-AuZn2.1: a γ-brass-related complex phase in the Au-Zn System.

γ1-AuZn2.1 in the Au-Zn binary system has been synthesized and its structure analyzed by single-crystal X-ray diffraction. It crystallizes in the trigonal space group P31m (No. 157) with ∼227 atoms per unit cell and represents a \surd3a × \surd3a × c superstructure of rhombohedrally distorted γ-Au5-xZn8+y. The structure is largely tetrahedrally closed packed. The formation of γ1-AuZn2.1 can be understood within the framework of a Hume-Rothery stabilization mechanism with a valence electron concentration of 1.68 e/a (valence electrons per atom).

New Nonlinear Optical Crystal of Rhodamine 590 Acid Phthalate.

The synthesis and crystal structure of rhodamine 590 acid phthalate (RhAP) have been reported. This novel solid-state rhodamine derivative not only has a longer fluorescence lifetime compared to rhodamine solid-state matrixes where emission is quenched but also possesses strong nonlinear optical characteristics. The static and dynamic first- and second-order hyperpolarizabilities were calculated using the time-dependent density functional theory at the B3LYP/6-31+G* level. The computed static values of ß and γ of RhAP by the X-ray diffraction (XRD) structure were 31.9 × 10-30 and 199.0 × 10-36 esu, respectively. These values were about 62 times larger than the corresponding values in urea, an already well-known nonlinear optical material. The second-order hyperpolarizability of the compound was determined experimentally by measuring the two-photon absorption cross section using intensity-modulated light fields. The reported compound, excitable at near-infrared, exhibited frequency upconversion with the two-photon absorption coefficient enhanced by two orders of magnitude compared to that of the dye solution. Hosting the dye in the solid, at high concentrations, exploits the nonlinearity of the dye itself as well as results in significant excitonic effects including formation of broad exciton band and superradiance.

Entropy-Driven Incommensurability: Chemical Pressure-Guided Polymorphism in PdBi and the Origins of Lock-In Phenomena in Modulated Systems.

Incommensurate order, in which two or more mismatched periodic patterns combine to make a long-range ordered yet aperiodic structure, is emerging as a general phenomenon impacting the crystal structures of compounds ranging from alloys and nominally simple salts to organic molecules and proteins. The origins of incommensurability in these systems are often unclear, but it is commonly associated with relatively weak interactions that become apparent only at low temperatures. In this article, we elucidate an incommensurate modulation in the intermetallic compound PdBi that arises from a different mechanism: the controlled increase of entropy at higher temperatures. Following the synthesis of PdBi, we structurally characterize two low-temperature polymorphs of the TlI-type structure with single crystal synchrotron X-ray diffraction. At room temperature, we find a simple commensurate superstructure of the TlI-type structure (comm-PdBi), in which the Pd sublattice distorts to form a 2D pattern of short and long Pd-Pd contacts. Upon heating, the structure converts to an incommensurate variant (incomm-PdBi) corresponding to the insertion of thin slabs of the original TlI type into the superstructure. Theoretical bonding analysis suggests that comm-PdBi is driven by the formation of isolobal Pd-Pd bonds along shortened contacts in the distorted Pd network, which is qualitatively in accord with the 18-n rule but partially frustrated by the population of competing Bi-Bi bonding states. The emergence of incomm-PdBi upon heating is rationalized with the DFT-Cemical Pressure (CP) method: the insertion of TlI-type slabs result in regions of higher vibrational freedom that are entropically favored at higher temperatures. High-temperature incommensurability may be encountered in other materials when bond formation is weakened by competing electronic states, and there is a path for accommodating defects in the CP scheme.

Highly-efficient removal of Pb(ii), Cu(ii) and Cd(ii) from water by novel lithium, sodium and potassium titanate reusable microrods.

In this work, we report on the efficient removal of heavy metal ions with nanostructured lithium, sodium and potassium titanates from simulated wastewater. The titanates were obtained via a fast, easy and cost effective process based on extraction of sulfate ions from the crystals of titanyl sulfate and their replacement with hydroxyl groups of NaOH, LiOH and KOH solutions leaving the Ti-O framework intact. The as-prepared titanates were carefully examined by scanning and transmission electron microscopy. Furthermore, the effect of contact time, pH, annealing temperature, together with adsorption in real conditions including competitive adsorption and reusability were studied. It was found that the maximum adsorption capacity, as calculated from the Langmuir adsorption model, is up to 3.8 mmol Pb(ii) per g, 3.6 mmol Cu(ii) per g and 2.3 mmol Cd(ii) per g. Based on the characterization results, a possible mechanism for heavy metal removal was proposed. This work provides a very efficient, fast and convenient approach for exploring promising materials for water treatment.

ß-Li2Zn5: A Low Symmetric Polar Intermetallic Compound.

The crystal structure of the high-temperature modification of the compound Li2Zn5 was determined using single-crystal X-ray diffraction data. It is the first representative of a new binary structure type with triclinic space group P1̅, where the parameters of the unit cell are a = 8.0073(3)Å, b = 11.5956(6)Å, c = 15.2956(5)Å, α = 96.39°, ß = 101.92°, and γ = 108.13°, the formula sum is Li11.748Zn31.113, Z = 2, and CCDC deposit number is 1861780. The title compound has a pseudohexagonal motif, made of 7- and 17-atom Li-zigzag chains and continuous Zn-chains, with the the relative placement of these large aggregates violating hexagonal symmetry. The structure may be decomposed into fragments, related to the AlB2 structure type, and could be obtained from multiplication of the unit cell, multiple substitution of Li atoms by triangles of Zn, insertion of Zn atoms, and deformation. Most structures of Li-Zn compounds, except LiZn, are highly symmetric but disordered. The possible causes of lower symmetry of ß-Li2Zn5 were analyzed using the results of DFT calculations. ß-Li2Zn5 shows high polarity of bonds, and Li atoms donate part of the electron density to Zn atoms.

A New Material with a Composite Crystal Structure Causing Ultralow Thermal Conductivity and Outstanding Thermoelectric Properties: Tl2Ag12Te7+δ.

A new state-of-the-art thermoelectric material, Tl2Ag12Te7+δ, which possesses an extremely low thermal conductivity of about 0.25 W m-1 K-1 and a high figure-of-merit of up to 1.1 at 525 K, was obtained using a conventional solid-state reaction approach. Its subcell is a variant of the Zr2Fe12P7 type, but ultimately its structure was refined as a composite structure of a Tl2Ag12Te6 framework and a linear Te atom chain running along the c axis. The super-space group of the framework was determined to be P63(00γ) s with a = b = 11.438(1) Å, c = 4.6256(5) Å, and that of the Te chain substructure has the same a and b axes, but c = 3.212(1) Å, space group P6(00γ) s. The modulation leads to the formation of Te2 and Te3 fragments in this chain and a refined formula of Tl2Ag11.5Te7.4. The structure consists of a complex network of three-dimensionally connected AgTe4 tetrahedra forming channels filled with the Tl atoms. The electronic structures of four different models comprising different Te chains, Tl2Ag12Te7, Tl2Ag12Te7.33, and 2× Tl2Ag12Te7.5, were computed using the WIEN2k package. Depending on the Te content within the chain, the models are either semiconducting or metallic. Physical property measurements revealed semiconducting properties, with an ultralow thermal conductivity, and excellent thermoelectric properties at elevated temperatures.

The Mystery of the AuIn 1:1 Phase and Its Incommensurate Structural Variations.

In this communication, the AuIn 1:1 phase ( Naturwissenschaften , 1953 , 40 , 437 , DOI: 10.1007/BF00590353 ), and its ordering behavior at various temperatures is investigated. To enable the growth of a X-ray suitable specimen, a tempering routine was established by the interpretation of a differential scanning calorimetry (DSC) study. In this way, good quality single crystals were grown and measured at the Crystal beamline at Synchrotron SOLEIL. From the acquired data, three variations of this structure could be found at temperatures of 400 °C and 300 °C and room temperature, with differing degrees of incommensurate modulation. Diffuse scattering found at 400 °C was interpreted with the help of a three-dimensional difference pair distribution function (3D-ΔPDF) study.

In Situ Synthesis and Single Crystal Synchrotron X-ray Diffraction Study of ht-Sn3Sb2: An Example of How Complex Modulated Structures Are Becoming Generally Accessible.

Recent developments in X-ray sources and detectors and the parallel development of software for nonstandard crystallography has made analysis of very complex structural problems accessible to nonexperts. Here, we report the successful solution of the structure of ht-Sn3Sb2, an analysis that presents several challenges but that is still manageable in a relatively straightforward way. This compound exists only in a narrow temperature regime and undergoes an unquenchable phase transformation on cooling to room temperature; it contains two elements with close to identical scattering factors, and the structure is incommensurately modulated with four symmetry dependent modulation wave vectors. In this study, an attempt was first made to synthesize the title compound by in-house crystal growth in the stability region of ht-Sn3Sb2, followed by cooling to room temperature. This is known to produce mutiply twinned stistaite and elemental tin, and this sample, freshly prepared, was then reheated in situ at the single crystal materials beamline Crystal at the synchrotron Soleil. This method was unsuccessful as reheating the sample led to loss of Sn from stistaite as revealed by a change in the measured modulation wave vector. The compound was instead successfully synthesized in situ at the beamline by the topochemical reaction of single crystalline stistaite and liquid tin. A well-formed crystal of stistaite was enclosed in a quartz capillary together with a large excess of tin and heated above the melting point of tin but below the melting point of ht-Sn3Sb2. The structure was probed by sychrotron X-ray diffraction using a wavelength close to the absorption edge of Sn to maximize elemental contrast. In the diffraction patterns, first order satellites were observed, making the structure of ht-Sn3Sb2 incommensurately modulated. Further analysis exposes four q-vectors running along the body diagonals of the cubic unit cell (q1' = α α α, q2' = -α α -α, q3' = -α -α α, q4' = α -α -α). To facilitate the analysis, the q vectors were instead treated as axial (q1 = α 0 0, q2 = 0 α 0, q3 = 0 0 α) and an F-type extinction condition for satellites was introduced so that only reflections with hklmnp, mnp all odd or all even, were considered. Further, the modulation functions F(qi) were set to zero, and only modulation functions of the type F(qi') were refined. The final model uses the four modulation functions, F(q1'), F(q2'), F(q3'), and F(q4'), to model occupancy Sn/Sb and positional modulation. The model shows a structure that comprises small NaCl type clusters, typically 7 × 7 × 7 atoms in extension, interspersed between single layers of elemental tin. The terminating layers of tin are slightly puckered, emulating an incipient deformation toward the structure of the layers perpendicular to the [001] direction in elemental tin. It is notable that this model is complementary to that of stistaite. In stistaite, two-dimensionally infinite slabs of rock salt are interspersed between layers of antimony along the trigonal [001] direction, so that the terminating Sb layers are the puckered bilayers typical for elemental Sb. Since all modulation functions are simple first-order harmonics, the structural model describes a locally disordered and most probably dynamic ordering.

FeII Hexa N-Heterocyclic Carbene Complex with a 528 ps Metal-to-Ligand Charge-Transfer Excited-State Lifetime.

The iron carbene complex [FeII(btz)3](PF6)2 (where btz = 3,3'-dimethyl-1,1'-bis(p-tolyl)-4,4'-bis(1,2,3-triazol-5-ylidene)) has been synthesized, isolated, and characterized as a low-spin ferrous complex. It exhibits strong metal-to-ligand charge transfer (MLCT) absorption bands throughout the visible spectrum, and excitation of these bands gives rise to a 3MLCT state with a 528 ps excited-state lifetime in CH3CN solution that is more than one order of magnitude longer compared with the MLCT lifetime of any previously reported FeII complex. The low potential of the [Fe(btz)3]3+/[Fe(btz)3]2+ redox couple makes the 3MLCT state of [FeII(btz)3]2+ a potent photoreductant that can be generated by light absorption throughout the visible spectrum. Taken together with our recent results on the [FeIII(btz)3]3+ form of this complex, these results show that the FeII and FeIII oxidation states of the same Fe(btz)3 complex feature long-lived MLCT and LMCT states, respectively, demonstrating the versatility of iron N-heterocyclic carbene complexes as promising light-harvesters for a broad range of oxidizing and reducing conditions.

A low-spin Fe(iii) complex with 100-ps ligand-to-metal charge transfer photoluminescence.

Transition-metal complexes are used as photosensitizers, in light-emitting diodes, for biosensing and in photocatalysis. A key feature in these applications is excitation from the ground state to a charge-transfer state; the long charge-transfer-state lifetimes typical for complexes of ruthenium and other precious metals are often essential to ensure high performance. There is much interest in replacing these scarce elements with Earth-abundant metals, with iron and copper being particularly attractive owing to their low cost and non-toxicity. But despite the exploration of innovative molecular designs, it remains a formidable scientific challenge to access Earth-abundant transition-metal complexes with long-lived charge-transfer excited states. No known iron complexes are considered photoluminescent at room temperature, and their rapid excited-state deactivation precludes their use as photosensitizers. Here we present the iron complex [Fe(btz)3]3+ (where btz is 3,3'-dimethyl-1,1'-bis(p-tolyl)-4,4'-bis(1,2,3-triazol-5-ylidene)), and show that the superior σ-donor and π-acceptor electron properties of the ligand stabilize the excited state sufficiently to realize a long charge-transfer lifetime of 100 picoseconds (ps) and room-temperature photoluminescence. This species is a low-spin Fe(iii) d5 complex, and emission occurs from a long-lived doublet ligand-to-metal charge-transfer (2LMCT) state that is rarely seen for transition-metal complexes. The absence of intersystem crossing, which often gives rise to large excited-state energy losses in transition-metal complexes, enables the observation of spin-allowed emission directly to the ground state and could be exploited as an increased driving force in photochemical reactions on surfaces. These findings suggest that appropriate design strategies can deliver new iron-based materials for use as light emitters and photosensitizers.

Exo-bonded six-membered heterocycle in the crystal structures of RE7Co2Ge4 (RE = La-Nd).

In this article four new ternary phases of RE7Co2Ge4 (RE = La-Nd) are reported. They were synthesized by a solid-state reaction of the elements at high temperature, and their crystal structures were investigated by single crystal X-ray diffraction data. The isostructural phases crystallize in a new monoclinic structure type, space group P21/c, Z = 4, Pearson code mP52, and Wyckoff sequence e13. They feature planar {Co4Ge6} clusters consisting of a benzene-like six-membered (Co4Ge2) metal heterocycle and four Co-Ge exo-bonds. Band structure calculations were carried out to investigate the electronic structures of La7Co2Ge4, in order to understand the nature of the chemical bonding, and the structure directing factors that determine the atomic ordering and the structure stability. These calculations indicate that the cobalt mid-transition metals are present as (formally) anionic species. They also reveal significant valence electron back-donation from the anionic {Co4Ge6} units to the La-d orbitals through multicenter bonding involving all atoms of the structure, which is key for the structure's stability with respect to incomplete charge transfer. The applicability of the 18 - n rule in rationalizing the Co-Co relative bond strength was also assessed and, the impact of these metal-metal interactions in stabilizing these clusters was described. Similar valence electron back-donation to stabilize further unusual cluster shapes is expected in other rare earth-transition metal-main group phases.

A smectic dodecagonal quasicrystal.

We report a solid smectic phase that exhibits dodecagonal global order. It is composed of axially stacked hexagonally ordered particle layers, and its 12-fold rotational symmetry induced by the 30° rotation of adjacent layers with respect to each other. A quasicrystal was produced in a molecular-dynamics simulation of a single-component system of particles interacting via a spherically-symmetric potential. It was formed as a result of a first-order phase transition from an isotropic liquid state that occurred under constant-density cooling. This finding implies that a similarly structured quasicrystal can possibly be produced by the same class of systems as those forming smectic-B crystals. This quasicrystal can also be expected to arise in a system of spherically-shaped colloidal particles with appropriately tuned potential.

Antimalarial activity of ruthenium(II) and osmium(II) arene complexes with mono- and bidentate chloroquine analogue ligands.

Eight new ruthenium and five new osmium p-cymene half-sandwich complexes have been synthesized, characterized and evaluated for antimalarial activity. All complexes contain ligands that are based on a 4-chloroquinoline framework related to the antimalarial drug chloroquine. Ligands HL(1-8) are salicylaldimine derivatives, where HL(1) = N-(2-((2-hydroxyphenyl)methylimino)ethyl)-7-chloroquinolin-4-amine, and HL(2-8) contain non-hydrogen substituents in the 3-position of the salicylaldimine ring, viz. F, Cl, Br, I, NO2, OMe and (t)Bu for HL(2-8), respectively. Ligand HL(9) is also a salicylaldimine-containing ligand with substitutions in both 3- and 5-positions of the salicylaldimine moiety, i.e. N-(2-((2-hydroxy-3,5-di-tert-butylphenyl)methyl-imino)ethyl)-7-chloroquinolin-4-amine, while HL(10) is N-(2-((1-methyl-1H-imidazol-2-yl)methylamino)ethyl)-7-chloroquinolin-4-amine) The half sandwich metal complexes that have been investigated are [Ru(η(6)-cym)(L(1-8))Cl] (Ru-1-Ru-8, cym = p-cymene), [Os(η(6)-cym)(L(1-3,5,7))Cl] (Os-1-Os-3, Os-5, and Os-7), [M(η(6)-cym)(HL(9))Cl2] (M = Ru, Ru-HL(9); M = Os, Os-HL(9)) and [M(η(6)-cym)(L(10))Cl]Cl (M = Ru, Ru-10; M = Os, Os-10). In complexes Ru-1-Ru-8 and Ru-10, Os-1-Os-3, Os-5 and Os-7 and Os-10, the ligands were found to coordinate as bidentate N,O- and N,N-chelates, while in complexes Ru-HL(9) and Os-HL(9), monodentate coordination of the ligands through the quinoline nitrogen was established. The antimalarial activity of the new ligands and complexes was evaluated against chloroquine sensitive (NF54 and D10) and chloroquine resistant (Dd2) Plasmodium falciparum malaria parasite strains. Coordination of ruthenium and osmium arene moieties to the ligands resulted in lower antiplasmodial activities relative to the free ligands, but the resistance index is better for the ruthenium complexes compared to chloroquine. Overall, osmium complexes appeared to be less active than the corresponding ruthenium complexes.

Synthesis, crystal structure, and bonding analysis of the hypoelectronic cubic phase Ca5Pd6Ge6.

The title compound, Ca5Pd6Ge6, was obtained during a systematic investigation of the Ca-Pd-Ge ternary phase diagram. The crystal structure was determined and refined from single-crystal X-ray diffraction data. It crystallizes in a new structure variant of the Y4PdGa12-type structure (Im3̅m, a = 8.7764(4) Å) that features an arrangement of vertex-sharing body-centered cubes of calcium, Ca@Ca8, with a hierarchical bcc network, interpenetrating a second (Pd6Ge6) network consisting of Ge2 dumbbells surrounded by Pd in a strongly flattened octahedron with Pd(µ(2)-η(2),η(4)-Ge2)-like motifs. These octahedra are condensed through the Pd to form a 3D open fcc network. Theoretical band structure calculations suggested that the compound is hypoelectronic with predominantly multicenter-type interatomic interactions involving all three elements and essentially a Hume-Rothery-like regime of electronic stabilization. The similar electronegativity between germanium and palladium atoms has a decisive impact on the bonding picture of the system.

A heteroleptic ferrous complex with mesoionic bis(1,2,3-triazol-5-ylidene) ligands: taming the MLCT excited state of iron(II).

Strongly σ-donating N-heterocyclic carbenes (NHCs) have revived research interest in the catalytic chemistry of iron, and are now also starting to bring the photochemistry and photophysics of this abundant element into a new era. In this work, a heteroleptic Fe(II) complex (1) was synthesized based on sequentially furnishing the Fe(II) center with the benchmark 2,2'-bipyridine (bpy) ligand and the more strongly σ-donating mesoionic ligand, 4,4'-bis(1,2,3-triazol-5-ylidene) (btz). Complex 1 was comprehensively characterized by electrochemistry, static and ultrafast spectroscopy, and quantum chemical calculations and compared to [Fe(bpy)3](PF6)2 and (TBA)2[Fe(bpy)(CN)4]. Heteroleptic complex 1 extends the absorption spectrum towards longer wavelengths compared to a previously synthesized homoleptic Fe(II) NHC complex. The combination of the mesoionic nature of btz and the heteroleptic structure effectively destabilizes the metal-centered (MC) states relative to the triplet metal-to-ligand charge transfer ((3)MLCT) state in 1, rendering it a lifetime of 13 ps, the longest to date of a photochemically stable Fe(II) complex. Deactivation of the (3)MLCT state is proposed to proceed via the (3)MC state that strongly couples with the singlet ground state.

AuCd4: a Hume-Rothery Phase with VEC of 1.8 and icosahedral and trigonal-prismatic clusters as building blocks.

The η phase in the Au-Cd binary system has been synthesized, and the structure has been analyzed by single-crystal X-ray diffraction. The compound η-AuCd(4) crystallizes in the hexagonal space group P6(3)/m (No. 176). The unit cell contains ∼273 atoms. The compound AuCd(4) represents a √3a × âˆš3a × c superstructure of the AgMg(4) type. The structure can be well described by icosahedral and trigonal-prismatic clusters. A phase transition to the high-temperature ε phase occurs exothermically at around 578 K. The compound is formed at a sharp valence electron concentration of 1.8 e/a. The compound can be understood within the framework of the Hume-Rothery stabilization mechanism.