Influence of PEGylation on nanoparticle mobility in different models of the extracellular matrix.

Nanoparticle transport inside the extracellular matrix (ECM) is a crucial factor affecting the therapeutic success. In this work, two in vitro ECM models - a neutrally charged collagen I network with an effective pore size of 0.47µm and Matrigel, a basement membrane matrix with strong negative charge and effective pore size of 0.14µm - were assessed for barrier function in the context of diffusing nanoparticles. Nanoparticles with a size of 120nm were coated with poly(ethylene glycol) (PEG) of different molecular weights - 2, 5 and 20kDa - over a range of gradually increasing coating densities - precisely 0.2, 2, 8 and 20PEG/nm2. The PEG corona was imaged in its native state without any drying process by atomic force microscopy, revealing that the experimentally determined arrangement of PEG at the surface did not match with what was theoretically expected. In a systematic investigation of nanoparticle mobility via fluorescence recovery after photobleaching, increasing both PEG MW and PEGylation density gradually improved diffusion properties predominately in collagen. Due to its smaller pore size and electrostatic obstruction, diffusion coefficients were about ten times lower in Matrigel than in the collagen network and an extension of the PEG MW and density did not necessarily lead to better diffusing particles. Consequently, collagen gels were revealed to be a poor model for nanoparticle mobility assessment, as neither their pore size nor their electrostatic properties reflect the expected in vivo conditions. In Matrigel, diffusion proceeded according to a sigmoidal increase with gradually increasing PEG densities showing threshold zeta potentials of 11.6mV (PEG2kDa) and 13.8mV (PEG5kDa), below which particles were regarded as mobile. Irrespective of the molecular weight particles with a PEGylation density lower than 2PEG/nm2 were defined as immobile and those with a PEG coverage of more than 8PEG/nm2 as mobile.

Oligolayer-coated nanoparticles: impact of surface topography at the nanobio interface.

Layer-by-layer coating of nanoparticles with a layer number in the single-digit range has gained increasing attention in the field of nanomedicinal research. However, the impact of using various polyelectrolytes on oligolayer formation and, more importantly, their influence on the interaction with the biological system has not often been considered in the past. Hence, we investigated the polyelectrolyte deposition profiles and resulting surface topographies of up to three polyelectrolyte layers on a flat gold sensor surface using three different polycations, namely, poly(ethylene imine) (PEI), poly(allylamine hydrochloride) (PAH), and poly(diallylammonium chloride) (PD), each in combination with poly(styrenesulfonate) (PSS). Surface plasmon resonance spectroscopy and atomic force microscopy revealed that the PEI/PSS pair in particular showed a so-called overshoot phenomenon, which is associated with partial polyelectrolyte desorption from the surface. This is also reflected by a significant increase in the surface roughness. Then, after having transferred the oligolayer assembly onto nanoparticles of ∼32 nm, we realized that quite similar surface topographies must have emerged on a curved gold surface. A major finding was that the extent of surface roughness contributes significantly to the fashion by which the oligolayer-coated nanoparticles interact with serum proteins and associate with cells. For example, for the PEI/PSS system, both the surface roughness and protein adsorption increased by a factor of ∼12 from the second to third coating layer and, at the same time, the cell association massively decreased to only one-third. Our study shows that surface roughness, along with other particle properties such as size, shape, zeta potential, and hydrophobicity, is another decisive factor for nanoparticles in a biological context, which has indeed been discussed previously but has not to date been investigated for oligolayers.

RNA "traffic lights": an analytical tool to monitor siRNA integrity.

The combination of thiazole orange and thiazole red as an internal energy transfer-based fluorophore pair in oligonucleotides provides an outstanding analytical tool to follow DNA/RNA hybridization through a distinct fluorescence color change from red to green. Herein, we demonstrate that this concept can be applied to small interfering RNA (siRNA) to monitor RNA integrity in living cells in real time with a remarkable dynamic range and excellent contrast ratios in cellular media. Furthermore, we show that our siRNA-sensors still possess their gene silencing function toward the knockdown of enhanced green fluorescent protein in CHO-K1 cells.

Layer-by-layer coated gold nanoparticles: size-dependent delivery of DNA into cells.

Because nanoparticles are finding uses in myriad biomedical applications, including the delivery of nucleic acids, a detailed knowledge of their interaction with the biological system is of utmost importance. Here the size-dependent uptake of gold nanoparticles (AuNPs) (20, 30, 50 and 80 nm), coated with a layer-by-layer approach with nucleic acid and poly(ethylene imine) (PEI), into a variety of mammalian cell lines is studied. In contrast to other studies, the optimal particle diameter for cellular uptake is determined but also the number of therapeutic cargo molecules per cell. It is found that 20 nm AuNPs, with diameters of about 32 nm after the coating process and about 88 nm including the protein corona after incubation in cell culture medium, yield the highest number of nanoparticles and therapeutic DNA molecules per cell. Interestingly, PEI, which is known for its toxicity, can be applied at significantly higher concentrations than its IC(50) value, most likely because it is tightly bound to the AuNP surface and/or covered by a protein corona. These results are important for the future design of nanomaterials for the delivery of nucleic acids in two ways. They demonstrate that changes in the nanoparticle size can lead to significant differences in the number of therapeutic molecules delivered per cell, and they reveal that the toxicity of polyelectrolytes can be modulated by an appropriate binding to the nanoparticle surface.

A library of strictly linear poly(ethylene glycol)-poly(ethylene imine) diblock copolymers to perform structure-function relationship of non-viral gene carriers.

A library of 39 strictly linear poly(ethylene glycol)-poly(ethylene imine) (PEG-PEI) diblock copolymers was synthesized for the delivery of plasmid DNA using PEG of 2, 5, or 10 kDa in combination with linear PEI with a molecular weight (MW) ranging from 1.5 to 10.8 kDa. In contrast to other approaches, the copolymers demonstrated a clear separation between the hydrophilic PEG and the nucleic acid condensing PEI moieties. Hence, the hypothesis was that PEG may not sterically counteract the interaction between the nucleic acid and PEI and that consequently, the copolymers are perfectly suited to build small and stable polyplexes. Analysis of the polyplexes revealed structure-function relationships and the general guideline was that the PEG domain had a greater influence on the physicochemical properties of the polyplexes than PEI. A PEG content higher than 50% led to small (<150 nm), nearly neutral polyplexes with favorable stability. The transfection efficacy of these polyplexes was significantly reduced compared to the PEI homopolymer, but was restored by the application of the corresponding degradable copolymer, which involved a redox triggerable PEG domain. In conclusion, valuable design criteria for the optimization of gene delivery carriers, which is only possible through the screening of such a large library, were gained.

Layer-by-layer assembled gold nanoparticles for siRNA delivery.

Although uptake into cells is highly complex and regulated, heterogeneous particle collectives are usually employed to deliver small interfering RNA (siRNA) to cells. Within these collectives, it is difficult to accurately identify the active species, and a decrease in efficacy is inherent to such preparations. Here, we demonstrate the manufacture of uniform nanoparticles with the deposition of siRNA on gold in a layer-by-layer approach, and we further report on the cellular delivery and siRNA activity as functions of surface properties.

Breaking up the correlation between efficacy and toxicity for nonviral gene delivery.

Nonviral nucleic acid delivery to cells and tissues is considered a standard tool in life science research. However, although an ideal delivery system should have high efficacy and minimal toxicity, existing materials fall short, most of them being either too toxic or little effective. We hypothesized that disulfide cross-linked low-molecular-weight (MW) linear poly(ethylene imine) (MW<4.6 kDa) would overcome this limitation. Investigations with these materials revealed that the extracellular high MW provided outstandingly high transfection efficacies (up to 69.62+/-4.18% in HEK cells). We confirmed that the intracellular reductive degradation produced mainly nontoxic fragments (cell survival 98.69+/-4.79%). When we compared the polymers in >1,400 individual experiments to seven commercial transfection reagents in seven different cell lines, we found highly superior transfection efficacies and substantially lower toxicities. This renders reductive degradation a highly promising tool for the design of new transfection materials.

Antimitotic activities of 2-phenylindole-3-carbaldehydes in human breast cancer cells.

Small molecules such as indoles are attractive as inhibitors of tubulin polymerization. Thus a number of 2-phenylindole-3-carbaldehydes with lipophilic substituents in both aromatic rings was synthesized and evaluated for antitumor activity in MDA-MB 231 and MCF-7 breast cancer cells. Some 5-alkylindole derivatives with a 4-methoxy group in the 2-phenyl ring strongly inhibit the growth of breast cancer cells with IC(50) values of 5-20nM. Their action can be rationalized by the cell cycle arrest in G(2)/M phase due to the inhibition of tubulin polymerization.

Mechanistic insights into linear polyethylenimine-mediated gene transfer.

We recently debuted a variety of linear polyethylenimines (LPEIs) with low molecular weight as carriers for gene delivery. The highest transfection efficiency (approximately 44%) was obtained with LPEI 6.6 kDa, while the cytotoxicity remained low (approximately 90% of CHO-K1 cells survived the transfection procedure). Here, we investigated various steps during the transfection process using LPEI 8.1, 5.0 and 1.8 kDa, in order to gain a more complete insight into LPEI-mediated gene transfer and to explore conceptual aspects for further optimization. The cellular uptake characterized by flow cytometry was similar for LPEI 8.1 and 5.0 kDa, while it was significantly lower for LPEI 1.8 kDa. The transfection efficacy in contrast was at NP 24 20.07% for LPEI 8.1 kDa and 39.71% for LPEI 5.0 kDa. This suggests that the endocytosis seems not to be a decisive parameter that determines the efficacy of a polymer in the transfection process. Real-time PCR investigations revealed that LPEI 1.8 kDa likewise or even better protected plasmid from degradation compared to LPEI 5.0 or 8.1 kDa. Furthermore, we found that 1/6 to 1/3 intact plasmid DNA reached the intracellular compartments after complexation with LPEI 1.8 kDa. Therefore, the amount of plasmid DNA available in the cytoplasm seems not to be a limiting factor in the transfection process. That LPEI 8.1-polyplexes built at NP 12 in glucose and transfected in serum-free culture conditions were superior to those built in sodium chloride or transfected in serum-containing conditions points at the structure as a decisive parameter deserving more attention in future studies.

Fluorescence resonance energy transfer: evaluation of the intracellular stability of polyplexes.

The investigation of intracellular mechanisms of non-viral nucleic acid delivery systems has provided great impetus for the improvement of their efficacy. Especially the intracellular release of the nucleic acid from the non-viral carrier system may be a relevant criterion for the high transfection efficiency of certain polymers. Therefore, we evaluated fluorescence resonance energy transfer (FRET) in combination with confocal laser scanning microscopy or flow cytometry as tool to determine the intracellular disintegration of polyplexes built with plasmid DNA and linear polyethylenimine. In microscopy, which allowed for an observation of polyplexes within single cells, sensitized emission measurement and acceptor photobleaching have been tested towards quantitative FRET analysis. In contrast, the whole cell population was analyzed by the flow cytometry-based method. We suggest that FRET is a useful tool to evaluate the intracellular disintegration of polyplexes built with various polymers.

2,5-Diphenylfuran-based pure antiestrogens with selectivity for the estrogen receptor alpha.

The estrogen receptor alpha (ERalpha) is understood to play an important role in the progression of breast cancer. Therefore, pure antiestrogens with a preference for this receptor form are of interest as new agents for the treatment of this malignancy. Several chemical structures with selective binding affinity for ERalpha have been identified and might be useful for the synthesis of ERalpha-selective pure antiestrogens. In this study we applied the 2,5-diphenylfuran system which is closely related to the triphenylfurans described by others. Various side chains with amino and/or sulfur functions were linked to C3 to convert the furans to estrogen antagonists without residual estrogenic activity. The degree of alpha-selectivity which ranges from 2.5- to 236-fold is strongly influenced by the alkyl group at C4. Antiestrogenic potency was determined in MCF-7/2a breast cancer cells stably transfected with a luciferase gene under the control of an ERE. The 2,5-bis(4-hydroxyphenyl)furan with an ethyl substituent and a 6-[N-methyl-N-(3-pentylthiopropyl)amino]hexyl side chain exerted the strongest antiestrogenic effect in this series with an IC(50) value of 50 nM in cells stimulated with 1 nM estradiol. The RBA values of this derivative were 18% (ERalpha) and 3.4% (ERbeta) of estradiol, respectively. It inhibited the growth of wild-type MCF-7 cells with an IC(50) value of 22 nM. The data show that the 2,5-diphenylfuran system is appropriate for the development of pure antiestrogens with preference for ERalpha.

Gene delivery with low molecular weight linear polyethylenimines.

BACKGROUND: Linear polyethylenimine (LPEI) with a molecular weight (MW) of 22 kDa has been described as having a superior ability to induce gene transfer compared to its branched form. However, the transfection efficiency of the polymer cannot be enhanced beyond a certain limit due to cytotoxicity. We explored the potential of utilizing LPEIs with MWs ranging from 1.0 to 9.5 kDa to overcome this limitation. METHODS: Polyplexes of plasmid DNA encoding for the enhanced green fluorescent protein (EGFP) and various LPEIs were compared concerning their transfection efficiency and cytotoxicity in CHO-K1 and HeLa cells by flow cytometry. The involvement of endolysosomes in LPEI-mediated gene transfer was investigated by applying the proton pump inhibitor bafilomycin A1 and the lysosomotropic agent sucrose. Confocal laser scanning microscopy was applied to assess the size and shape of polyplexes under cell culture conditions, to detect their endolysosomal localization and to observe their translocation to the nucleus. RESULTS: The transfection efficiency could be altered by varying the MW and the amount of the polymer available for polyplex formation. The highest transfection efficiency (about 44%), i.e. the fraction of EGFP-positive cells, was obtained with LPEI 5.6 kDa, while the cytotoxicity remained low. The colocalization of polyplexes and endolysosomes was observed, and it appeared that the larger polyplexes escaped from the acidic organelles particularly quickly. For LPEI 5.0 and 9.0 kDa, the number of cells and nuclei that had taken up DNA after 6 hours was similar, as determined by flow cytometry. CONCLUSIONS: Our study suggests that LPEIs with low MWs are promising candidates for non-viral gene delivery, because they are more efficient and substantially less toxic than their higher MW counterparts.

Stilbene-based inhibitors of estrone sulfatase with a dual mode of action in human breast cancer cells.

Estrone sulfate (E1S) is an endogenous prodrug that delivers estrone and, subsequently, estradiol to target cells, after hydrolysis by the enzyme estrone sulfatase, which is active in various tissues including hormone-dependent breast cancer. Blockade of this enzyme should reduce the estrogen level in breast cancer cells and prevent hormonal growth stimulation. In this study, a number of sulfamoyloxy-substituted stilbenes with side chains that guarantee antiestrogenic activity were synthesized and evaluated as inhibitors of estrone sulfatase. They inhibited this enzyme in human MDA-MB 231 breast cancer cells, with IC(50) values in the submicromolar range. The effects of both the free hydroxy derivatives and the sulfamates on gene activation were determined in transfected MCF-7/2a breast cancer cells stimulated either with estradiol or with estrone sulfate. The analysis of data revealed a dual mode of action of the majority of compounds. They blocked gene expression by inhibition of estrone sulfatase and by antiestrogenic action. This pharmacological profile was also observed in assays on antiproliferative activity. The most potent derivative 8 g inhibited the growth of wild-type human MCF-7 cells with an IC(50) value of 13 nM.

Synthesis and biological evaluation of stilbene-based pure estrogen antagonists.

Replacement of one of the ethyl substituents in diethylstilbestrol by side chains with functional groups converted this potent estrogen into pure antiestrogens with the potential for the treatment of breast cancer. These agents completely suppressed estrogen receptor-mediated gene activation and inhibited the growth of estrogen-sensitive MCF-7 breast cancer cells in submicromolar concentrations. The most potent derivative displayed similar activity as fulvestrant (ICI 182,780) in vitro and in the mouse uterine weight test. Obviously, the stilbene structure can act as a substitute for estradiol in the development of pure estrogen antagonists.

2-phenylindole sulfamates: inhibitors of steroid sulfatase with antiproliferative activity in MCF-7 breast cancer cells.

A number of 2-phenylindole sulfamates with lipophilic side chains in 1- or 5-position of the indole were synthesized and evaluated as steroid sulfatase (estrone sulfatase) inhibitors. Most of the new sulfamates inhibited the enzymatic hydrolysis of estrone sulfate in MDA-MB 231 breast cancer cells with IC(50) values between 2 nM and 1 microM. A favorable position for a long side chain is the nitrogen of a carbamoyl group at C-5 of the indole when the phenyl ring carries the sulfamate function. These derivatives inhibit gene activation in estrogen receptor (ER)-positive MCF-7 breast cancer cells in submicromolar concentrations and reduce cell proliferation with IC(50) values of ca. 1 microM. All of the potent inhibitors were devoid of estrogenic activity and have the potential for in vivo application as steroid sulfatase inhibitors.

Sulfamoyloxy-substituted 2-phenylindoles: antiestrogen-based inhibitors of the steroid sulfatase in human breast cancer cells.

Estrone sulfate (E1S) is an endogenous prodrug that delivers estrone and, subsequently, estradiol to the target cells following the hydrolysis by the enzyme estrone sulfatase which is active in various tissues including hormone dependent breast cancer cells. Blockade of this enzyme should reduce the estrogen level in breast cancer cells and prevent hormonal growth stimulation. Sulfamates of a variety of phenolic compounds have been shown to be inhibitors of estrone sulfatase. Our rational is based on findings that these inhibitors can undergo hydrolysis and the pharmacological effects of the free hydroxy compounds contribute to the bioactivity of the sulfamates. A desirable action of the metabolites would be an estrogen antagonism to block stimulatory effects of residual amounts of estrogens. Thus, we synthesized a number of sulfamoyloxy-substituted 2-phenylindoles with side chains at the indole nitrogen that guarantee antiestrogenic activity. All of the new sulfamates were studied for their inhibitory effects on the enzyme estrone sulfatase from human breast cancer cells and their (anti)hormonal activities in stably transfected human MCF-7/2a mammary carcinoma cells. The hormonal profile of the sulfamates was partly reflected by the properties of the corresponding hydroxy precursors. Some of the sulfamoylated antiestrogens strongly inhibited estrone sulfatase activity with IC(50) values in the submicromolar range. They were devoid of agonist activity and suppressed estrone sulfate-stimulated gene expression mainly by blocking the enzyme. Examples are the disulfamates of the indoles ZK 119, 010 and ZK 164, 015. Their IC(50)s for sulfatase inhibition were 0.3 and 0.2 microM, respectively, and 50 and 80 nM, respectively, for the inhibition of E1S-stimulated luciferase expression in transfected MCF-7 cells. With some of the new sulfamates an additional direct antiestrogenic effect was noticed which might be due to a partial hydrolysis during incubation and would improve the growth inhibitory effect on estrogen-sensitive breast cancer cells.