RESUMEN
Plant-derived nanovesicles such as bilberries nanovesicles (BNVs) show immense promise as next-generation biotherapeutics and functional food ingredients; however, their isolation, purification, and storage on a large scale remain a challenge. In this study, biocompatible and nanostructured composite all-cellulose membranes are introduced as a scalable and straightforward approach to the isolation of BNV. The membranes consisting of a cellulose acetate matrix infused with anionic or cationic nanocelluloses promoted selective capture of BNVs through electrostatic and size-exclusion-mediated depth filtration. Furthermore, the surface of the composite membrane acted as a storage matrix for BNVs, ensuring their prolonged stability at 4 °C. The BNVs stored in the membrane could be promptly released through elution assisted by low-pressure vacuum filtration or diffusion in liquid media. The morphology, bioactivity, and stability of the extracted BNVs were preserved, and the release rate of BNVs in different cell cultures could be regulated, facilitating their use for local therapy. Consequently, this approach paves the way for the scalable production, purification, and storage of nanovesicles and advances their use in biotherapeutics and functional foods.
RESUMEN
Biogenic, sustainable two-dimensional architectures, such as films and nanopapers, have garnered considerable interest because of their low carbon footprint, biodegradability, advanced optical/mechanical characteristics, and diverse potential applications. Here, bio-based nanopapers with tailored characteristics were engineered by the electrostatic complexation of oppositely charged colloidal phosphorylated cellulose nanofibers (P-CNFs) and deacetylated chitin nanocrystals (ChNCs). The electrostatic interaction between anionic P-CNFs and cationic ChNCs enhanced the stretchability and water stability of the nanopapers. Correspondingly, they exhibited a wet tensile strength of 17.7 MPa after 24 h of water immersion. Furthermore, the nanopapers exhibited good thermal stability and excellent self-extinguishing behavior, triggered by both phosphorous and nitrogen. These features make the nanopapers sustainable and promising structures for application in advanced fields, such as optoelectronics.
RESUMEN
Here, biogenic and multifunctional active food coatings and packaging with UV shielding and antimicrobial properties were structured from the aqueous dispersion of an industrial byproduct, suberin, which was stabilized with amphiphilic cellulose nanofibers (CNF). The dual-functioning CNF, synthesized in a deep eutectic solvent, functioned as an efficient suberin dispersant and reinforcing agent in the packaging design. The nanofibrillar percolation network of CNF provided a steric hindrance against the coalescence of the suberin particles. The low CNF dosage of 0.5 wt% resulted in dispersion with optimal viscosity (208.70 Pa.s), enhanced stability (instability index of <0.001), and reduced particle size (9.37 ± 2.43 µm). The dispersion of suberin and CNF was further converted into self-standing films with superior UV-blocking capability, good thermal stability, improved hydrophobicity (increase in water contact angle from 61° ± 0.15 to 83° ± 5.11), and antimicrobial properties against gram-negative bacteria. Finally, the synergistic bicomponent dispersions were demonstrated as fruit coatings for bananas and packaging for strawberries to promote their self-life. The coatings and packaging considerably mitigated fruit deterioration and improved their freshness by preventing moisture loss and microbial attack. This sustainable approach is expected to pave the way toward advanced, biogenic, and active food packaging based on widely available bioresources.
Asunto(s)
Celulosa , Embalaje de Alimentos , Lípidos , Nanofibras , Madera , Nanofibras/química , Celulosa/química , Embalaje de Alimentos/métodos , Madera/química , Lípidos/química , Interacciones Hidrofóbicas e Hidrofílicas , Antibacterianos/química , Antibacterianos/farmacología , Viscosidad , Musa/química , Agua/química , Bacterias Gramnegativas/efectos de los fármacos , Frutas/químicaRESUMEN
The extraction of various minerals is commonly conducted through froth flotation, which is a versatile separation method in mineral processing. In froth flotation, depressants are employed to improve the flotation selectivity by modifying the wettability of the minerals and reducing their natural or induced floatability. However, the environmental impact of many current flotation chemicals poses a challenge to the sustainability and selectivity of the ore beneficiation processes. To mitigate this issue, cellulose, particularly nanocelluloses, has been explored as a potential alternative to promote sustainable mineral processing. This study focused on silylated cellulose nanocrystals (CNCs) as biodepressants for sulfide minerals in froth flotation. CNCs containing thiol silane groups or bifunctional CNCs containing both thiol and propyl silanes were synthesized using an aqueous silylation reaction, and their performance in the flotation of chalcopyrite and pyrite was investigated in the presence of a sodium isobutyl xanthate collector. The results showed that the modified CNCs exhibited preferential interaction between chalcopyrite, and the flotation recovery of chalcopyrite decreased from â¼76% to â¼24% in the presence of thiol-grafted CNCs at pH 6, while the pyrite recovery decreased only from â¼82% to â¼75%, indicating the efficient selectivity of thiol-silylated CNCs toward chalcopyrite depression.
RESUMEN
Herein, a dual-functioning deep eutectic solvent system based on triethylmethylammonium chloride and imidazole was harnessed as a swelling agent and a reaction medium for the esterification of cellulose with n-octyl succinic anhydride (OSA). The modified or amphiphilic cellulose nanofibers (ACNFs), synthesized using three different OSA-to-anhydroglucose unit molar ratios (0.5:1, ACNF-1; 1:1, ACNF-2; and 1.5:1, ACNF-3), were further converted into nanofibers with degree of substitution (DS) values of 0.24-0.66. The ACNFs possessed a lateral dimension of 4.24-9.22 nm and displayed surface activity due to the balance of hydrophobic and hydrophilic characteristics. The ACNFs made stable aqueous dispersions; however, the instability index of ACNF-3 (0.51) was higher than those of ACNF-1 (0.29) and ACNF-2 (0.33), which was attributed to the high DS-induced hydrophobicity, causing the instability in water. The amphiphilic nature of ACNFs promoted their performance as stabilizers in oil-in-water Pickering emulsions with average droplet sizes of 4.85 µm (ACNF-1) and 5.48 µm (ACNF-2). Self-standing films of ACNFs showed high contact angles for all the tested DS variants (97.48-114.12°), while their tensile strength was inversely related to DS values (ACNF-1: 115 MPa and ACNF-3: 49.5 MPa). Aqueous dispersions of ACNFs were also tested for coating fruits to increase their shelf life. Coatings improved their shelf life by decreasing oxygen contact and moisture loss.
Asunto(s)
Celulosa , Nanofibras , Nanofibras/química , Nanofibras/ultraestructura , Emulsiones/química , Solventes/química , Celulosa/química , Celulosa/ultraestructura , Betula/química , EsterificaciónRESUMEN
The sea area around the Orkney archipelago, Scotland is subjected to substantial maritime shipping activities. By contract, the Svalbard archipelago, Norway currently has a rather low marine traffic profile. Future projections, however, indicate that the Trans-Arctic route might change the whole transportation picture and Svalbard may be at the centre of maritime activities. Both archipelagos have sensitive environmental resources at sea and inland, including bird communities. There are, for instance, 13 Red Listed species present in Orkney and 2 in Svalbard. In this regard, it is important to address oil spill risks along existing and projected shipping routes. Hypothetical spills were simulated in twelve scenarios for both the Orkney and Svalbard archipelagos with the OpenDrift open-source software. The results indicate risks to seabird communities. For Orkney, the spills resulted in the most extensive contamination of the sea and land environments in autumn. For Svalbard, autumn spills on the contrary presented the lowest risk to seabirds. Based on the simulations, we recommend increased caution for shipping activities in the problematic seasons, improved local readiness for ship accidents and sufficient pre-incident planning.
Asunto(s)
Contaminación por Petróleo , Animales , Svalbard , Noruega , Accidentes , AvesRESUMEN
Wound dressings are important for wound repair. The morphology of the biomaterials used in these dressings, and in particular, the pore structure affects tissue regeneration by facilitating attachment and proliferation of cells due to the hierarchical multiscale, water absorbance, and nutrient transport. In the present study, silk fibroin (SF) sponges with walls containing nanopores (SFNS) were prepared from SF nanoparticles generated during the autoclaving of SF solutions, followed by leaching the SF nanoparticles from the freeze-dried sponges of SF. The nano/microporous structure, biofluid absorbance, and porosity of the SF sponges with and without nanopores were characterized. In vitro cell proliferation, in vivo biocompatibility, and wound healing were evaluated with the sponges. The results demonstrated that SFNS had significantly increased porosity and water permeability, as well as cell attachment and proliferation when compared with SF sponges without the nanopores (SFS). Wound dressings were assessed in a rat skin wound model, and SFNS was superior to SFS in accelerating wound healing, supported by vascularization, deposition of collagen, and increased epidermal thickness over 21 days. Hence, such a dressing material with a hierarchical multiscale pore structure could promote cell migration, vascularization, and tissue regeneration independently without adding any growth factor, which would offer a new strategy to design and engineer better-performed wound dressing.
Asunto(s)
Fibroínas , Nanoporos , Ratas , Animales , Fibroínas/química , Cicatrización de Heridas , Colágeno/metabolismo , Agua , SedaRESUMEN
Eutectic mixtures and deep eutectic solvents (DESs) are promising green media for the pre-treatment of lignocellulose materials. They can be harnessed for the swelling of cellulose and further facilitate cellulose hydrolysis, derivatization, and production of cellulose-based (nano) materials. Several studies indicated that water can take part in the formation of the nanostructure of DES; however, it is still unclear how additional water influences many important properties and functioning of DES, especially when the molar ratio of compounds differs from the eutectic point composition. Here, viscosity, pH, conductivity, solvatochromic and solvatomagnetic solvent parameters, and fiber swelling capacity of choline chloride and urea mixtures demonstrating different molar ratios were investigated in the presence and absence of added water. The participation of water in the formation of molecular clusters with choline chloride and urea was indicated by viscosity, pH, and conductivity measurements. Hydrogen bond acceptor values of aqueous mixtures increased as a function of water content, and the results obtained using both methods were in line, indicating their suitability for the determination of hydrogen bond acidity of aqueous choline chloride-urea mixtures. However, hydrogen bond basicity determined by solvatochromic and magnetic methods exhibited almost opposite trends. The close investigation of the chemical shift of solvatomagnetic probes indicated that the chemical environment of the choline chloride-urea (1 : 2) mixture remained constant until the water content of 30 wt% was in line with previous molecular simulations. When cellulose fibers were treated with mixtures under mixing, the non-ideality of the choline chloride-urea mixture and the absence of water were found to be advantageous; however, aqueous mixtures efficiently increased the diameters of cellulose fibers in the absence of mixing, and water-containing mixtures appeared to be appealing systems for cellulose pretreatments.
Asunto(s)
Celulosa , Urea , Agua , Colina , Enlace de HidrógenoRESUMEN
The isolation of extracellular vesicles (EVs) from milk, a complex mixture of colloidal structures having a comparable size to EVs, is challenging. Although ultracentrifugation (UC) has been widely used for EV isolation, this has significant limitations, including a long processing time at high g-force conditions and large sample volume requirements. We introduced a new approach based on nature nanoentities cellulose nanofibers (CNFs) and short time and low g-force centrifugation to isolate EVs from various milk fractions. The flexible and entangled network of CNFs forms nanoporous, which entraps the EVs. Further, positively charged CNFs interact with anionic EVs through an electrostatic attraction, promoting their isolation with efficiency comparable with UC. The functionality and toxicity of isolated milk EVs were tested in Caco2 cells. Overall, the newly developed approach provides straightforward isolation and biocompatibility and preserves the natural properties of the isolated EVs, enabling further applications.
Asunto(s)
Vesículas Extracelulares , Nanofibras , Animales , Células CACO-2 , Celulosa/farmacología , Mezclas Complejas , Humanos , LecheRESUMEN
A combined pretreatment based on alkaline deep eutectic solvent (DES) of K2CO3 and glycerol and sequential acid fractionation was developed to extract reactive lignin from wheat straw biomass. This process exhibited excellent purification performance in lignin isolation, and the lignin fractionated at low pH displayed high reactivity, having hydroxyl and carboxyl groups up to 9.60 and 2.52 mmol/g, respectively. Silica was selectively separated and removed during the precipitation stage, avoiding the "silica interference". Moreover, DES-lignin nanospheres created by self-assembly using lignin fractions obtained by acid precipitation possessed a high zeta potential, large particle size and high content of hydrophilic groups. Overall, the findings related to the dissociation mechanism and fractionation of reactive lignin during alkaline DES pretreatment and the acid sequence precipitation are crucial for facilitating lignin valorization in high-added value products.
Asunto(s)
Lignina , Nanosferas , Biomasa , Disolventes Eutécticos Profundos , Hidrólisis , Radical Hidroxilo , Lignina/química , Fenoles , Dióxido de Silicio , Solventes/química , TriticumRESUMEN
Transforming potential waste materials into high-value-added sustainable materials with advanced properties is one of the key targets of the emerging green circular economy. Natural mica (muscovite) is abundant in the mining industry, which is commonly regarded as a byproduct and gangue mineral flowing to waste rock and mine tailings. Similarly, chitin is the second-most abundant biomass resource on Earth after cellulose, extracted as a byproduct from the exoskeleton of crustaceans, fungal mycelia, and mushroom wastes. In this study, exfoliated mica nanosheets were individualized using a mechanochemical process and incorporated into regenerated chitin matrix through an alkali dissolution system (KOH/urea) to result in a multifunctional, hybrid hydrogel, and film design. The hydrogels displayed a hierarchical and open nanoporous structure comprising an enhanced, load-bearing double-cross-linked polymeric chitin network strengthened by mica nanosheets possessing high stiffness after high-temperature curing, while the hybrid films (HFs) exhibited favorable UV-shielding properties, optical transparency, and dielectric properties. These hybrid designs derived from industrial residues pave the way toward sustainable applications for many future purposes, such as wearable devices and tissue engineering/drug delivery.
Asunto(s)
Silicatos de Aluminio/química , Materiales Biomiméticos/química , Biopolímeros/química , Hidrogeles/química , Minerales/química , Nanoestructuras/química , Biomasa , Ensayo de Materiales , Tamaño de la PartículaRESUMEN
Dewatering in the preparation of cellulose nanopapers can take up to a few hours, which is a notable bottleneck in the commercialization of nanopapers. As a solution, we report a filtration-free method that is capable of preparing lactic acid-modified cellulose nanopapers within a few minutes. The bleached cellulose nanofibers (CNFs), obtained using a Masuko grinder, were functionalized by sonication-assisted lactic acid modification and centrifuged at 14â¯000 rpm to achieve a doughlike, concentrated mass. The concentrated CNFs were rolled into a wet sheet and dried in a vacuum drier to obtain nanopapers. The nanopaper preparation time was 10 min, which is significantly faster than the earlier time period reported in the literature (up to a few hours of preparation time). The mechanical properties of nanopaper were comparable to the previous values reported for nanopapers. In addition, the method was successfully used to prepare highly conductive functional nanopapers containing carboxylated multiwalled carbon nanotubes.
RESUMEN
This study aims to examine the characteristics of two solid lignin fractions isolated from wheat straw using alkaline and acidic deep eutectic solvents (DESs). The chemical properties and morphological characteristics of the two lignin fractions were evaluated by measuring their purity, elemental composition, molecular weight and particle size distributions, and microstructure. Their chemical structure was evaluated using DRIFT (diffuse reflectance infrared Fourier transform) spectroscopy, GPC (gel permeation chromatography), TGA (thermogravimetric analysis), 13C NMR (nuclear magnetic resonance), 31P NMR, and HSQC NMR. Our findings showed that the lignin isolated using alkaline DESs was less pure and had a smaller particle size, higher molecular weight, and thermal stability compared to the lignin isolated using acidic DESs. Their lignin structure was also determined to be different due to varying selective fractures on the linkages of lignin. These results suggest that the DES treatments could selectively extract lignin from wheat straw with different yields, compositions, morphologies, and structures, which could then provide a theoretical basis for the selection of DESs for specially appointed lignin extraction.
Asunto(s)
Álcalis/química , Lignina/química , Triticum/química , Ácidos/química , Hidrólisis , Espectroscopía de Resonancia Magnética , Peso Molecular , Tallos de la Planta/química , Solventes/químicaRESUMEN
The continuously increasing demand for faster data traffic of our telecommunication devices requires new and better materials and devices that operate at higher frequencies than today. In this work, a porous composite of silica nanoshells and cellulose nanofibers is demonstrated as a suitable candidate of dielectric substrates to be used in future 6G frequency bands. The hollow nanospheres of amorphous SiO2 with outstanding electromagnetic properties were obtained by a template-assisted Stöber process, in which a thin shell of silica is grown on polystyrene nanospheres first, and then the polymer core is burned off in a subsequent step. To be able to produce substrates with sufficient mechanical integrity, the nanoshells of SiO2 were reinforced with cellulose nanofibers resulting in a porous composite of very low mass density (0.19 ± 0.02 g cm-3), which is easy to press and mold to form films or slabs. The low relative dielectric permittivity (ε r = 1.19 ± 0.01 at 300 GHz and ε r = 1.17 ± 0.01 at 2.0 THz) and corresponding loss tangent (tan δ= 0.011 ± 0.001 at 300 GHz and tan δ = 0.011 ± 0.001 at 2.0 THz) of the composite films are exploited in substrates for radio frequency filter structures designed for 300 GHz operation.
RESUMEN
A deep eutectic solvent (DES) derived from ferric chloride hexahydrate and betaine chloride (molar ratio of 1:1) was used as hydrolytic media for production of chitin nanocrystals (ChNCs) with a high yield (up to 88.5%). The synergistic effect of Lewis acid and released Brønsted acid from betaine hydrochloride enabled the efficient hydrolysis of chitin for production of ChNCs coupled with ultrasonication with low energy consumption. The obtained ChNCs were with an average diameter of 10 nm and length of 268 nm, and a crystallinity of 89.2% with optimal synthesis conditions (at 100 °C for 1 h with chitin-to-DES mass ratio of 1:20). The ChNCs were further investigated as efficient emulsion stabilizers, and they resulted in stable o/w emulsions even at a high oil content of 50% with a low ChNC dosage of 1 mg/g. Therefore, a potential approach based on a DES on the production of chitin-based nanoparticles as emulsifiers is introduced.
RESUMEN
In this work, a surface cationized inorganic-organic hybrid foam was produced from porous geopolymer (GP) and cellulose nanocrystals (CNCs). GPs were synthesized from alkali-activated metakaolin using H2O2 as a blowing agent and hexadecyltrimethylammonium bromide (CTAB) as a surfactant. These highly porous GPs were combined at pH 7.5 with cationic CNCs that had been synthesized from dissolving pulp through periodate oxidation followed by cationization in a deep eutectic solvent. The GP-CNC hybrid foams were employed as reactive filters in the removal of the anionic dye, methyl orange (MO; 5-10 mg/L, pH 7). The effects of a mild acid wash and thermal treatments on the structure, properties, and adsorption capacity of the GPs with CNCs and MO were investigated. The CNCs aligned as films and filaments on the surfaces of the neutralized GPs and the addition of CNCs improved MO removal by up to 84% compared with the reference sample. In addition, CTAB was found to disrupt the attachment of CNCs on the pores and improve adsorption of MO in the GPs with and without CNCs.
RESUMEN
Five different acidic deep eutectic solvents (DESs) composed of choline chloride and organic acids were applied to fabricate chitin nanocrystals (ChNCs). All DESs resulted in high transmittance and stable ChNCs suspensions with very high mass yield ranging from 78 % to 87.5 % under proper reaction conditions. The acidic DESs had a dual role in ChNCs fabrication, i.e. they promoted hydrolysis of chitin and acted as an acylation reagent. Physicochemical characterization of chitin revealed that the removal of amorphous area during DES treatments led to increased crystallinity of ChNCs and a dimension diversity correlated the DES used. The average diameter and length of individual ChNCs ranged from 42 nm to 49 nm and from 257 nm to 670 nm, respectively. The thermal stability of ChNCs was comparable to that of pristine chitin. Thus, acidic DESs showed to be non-toxic and environmentally benign solvents for production of functionalized chitin nanocrystals.
RESUMEN
[This corrects the article DOI: 10.1021/acs.jpcc.9b08339.].