Biomechanical Comparisons of Different Reconstructive Techniques for Scapholunate Dissociation: A Cadaveric Study.

There are many techniques for the treatment of chronic scapholunate dissociation. The three-ligament tenodesis (3LT) is used most widely, but reconstruction of the dorsal ligament alone may not provide sufficient stability. The Mark-Henry technique (MHT) compensates for the insufficient stability of 3LT by additional reconstruction of the volar ligament, but the procedure is complex. The SwiveLock technique (SWT), a recently introduced method, provides stability by using autologous tendons with synthetic tapes, but lacks long-term clinical results. To perform biomechanical comparisons of different reconstructive techniques for scapholunate dissociation using a controlled laboratory cadaveric model. Eleven fresh-frozen upper-extremity cadaveric specimens were prepared. The scapholunate distance, scaphoid rotation, and lunate rotation of the specimens were measured during continuous flexion-extension and ulnar-radial deviation movements. The data were collected using a wrist simulator with a linear guide rail system (tendon load/motion-controlled system) and a motion capture system. Results were compared in five conditions: (1) intact, (2) scapholunate dissociation, (3) SWT, (4) 3LT, and (5) MHT. Paired t-test was employed to compare the biomechanical characteristics of intact wrists to those of scapholunate dissociated wrists, and to those of wrists after each of the three reconstruction methods. SWT and MHT were effective solutions for reducing the widening in scapholunate distance. According to the radioscaphoid angle, all three reconstruction techniques were effective in addressing the flexion deformity of the scaphoid. According to the radiolunate angle, only SWT was effective in addressing the extension deformity of the lunate. In terms of scapholunate angle, only the results after SWT did not differ from those of the intact wrist. The SWT technique most effectively improved distraction intensity and rotational strength for the treatment of scapholunate dissociation. Taking into account the technical complexity of 3LT and MHT, SWT may be a more efficient technique to reduce operating time and minimize complications due to multiple incisions, transosseous tunnels, and complicated shuttling.

Coexisting Kienböck's and Preiser's Disease of the Wrist: Experience with Proximal Row Carpectomy with Dorsal Capsular Interposition Technique.

BACKGROUND: Idiopathic avascular necrosis of the lunate is known as Kienböck's disease and that of the scaphoid is known as Preiser's disease. Because the prevalence of coexisting Kienböck's and Preiser's diseases is very low, standardized stages of disease and treatments are not established. CASE PRESENTATION: We report coexisting avascular necrosis of the scaphoid and lunate in a 68-year-old woman with no history of steroids or other risk factors. We treated her with proximal row carpectomy with capsular interposition technique. A distal-based dorsal capsular flap was prepared and repaired the palmar capsule. At the last follow-up, she had no pain and had gained improved range of wrist motion. There was no arthritic change at the newly formed radiocapitate joint. CONCLUSIONS: In the case of collapsed lunate and scaphoid with avascular necrosis, the proximal row carpectomy procedure has an advantage. Proximal row carpectomy with dorsal capsular interposition can be performed when the lunate or scaphoid cannot be saved. Arthritic changes of the capitate head and distal radius lunate facet can be covered with the dorsal capsule.

Efficacy of closed cell self expandable metallic stent for peripheral arterial disease in the porcine iliac artery.

This study aimed to investigate the efficacy of a closed-cell self-expandable metallic stent (SEMS) with or without expanded-polytetrafluoroethylene (e-PTFE)-covering membrane in a porcine iliac artery model. Twelve Yorkshire domestic pigs were divided into a bare closed-cell SEMS (B-SEMS) group (n = 6) and covered closed-cell SEMS (C-SEMS) group (n = 6). Both closed-cell SEMSs were placed in the right or left iliac artery. Thrombogenicity score in the C-SEMS group was significantly higher than that in the B-SEMS group (p = 0.004) after 4 weeks. Angiographic findings of mean luminal diameters at 4 weeks follow-up did not differ significantly between B-SEMS and C-SEMS groups. Neointimal hyperplasia thickness as well as degree of inflammatory cell infiltration and collagen deposition in the C-SEMS group was significantly greater than that in the B-SEMS group (p < 0.001). Closed-cell SEMSs successfully maintained patency for 4 weeks without stent-related complications in the porcine iliac artery. Although mild thrombus with neointimal hyperplasia was observed in the C-SEMS group, subsequent occlusion, and in-stent stenosis did not occur in any of the pigs until the end of the study. Closed-cell SEMS with or without the e-PTFE covering membrane is effective and safe for the porcine iliac artery.

A Novel Surgical Technique for Neglected Volar Dislocation of the Lunate: Cases Report and Literature Review.

BACKGROUND: Treatments for chronic perilunate or lunate dislocations are very difficult and associated with poor prognoses. There is no established treatment method and are still many controversies. CASE PRESENTATION: We reported three cases of chronic neglected lunate volar dislocation treated with a novel surgical technique. All three cases were males with wrist pain and tingling sensation. Radiographs confirmed chronic volar dislocation of the lunate. Open reduction was performed by combined volar and dorsal approaches. After anatomical reduction, scapholunate and lunotriquetral interosseous ligament reconstructions were performed with the palmaris longus tendon and synthetic tape. The patients had an uneventful postoperative period with satisfactory functional outcomes at the last follow-up. CONCLUSIONS: We believe that open reduction and interosseous ligament reconstruction using the autogenous tendon and synthetic tape may be a valuable option for treating chronic volar dislocation of the lunate.

Guided-Motion Bicruciate-Stabilized Total Knee Arthroplasty Reproduces Native Medial Collateral Ligament Strain.

Background and Objectives: Guided-motion bicruciate-stabilized (BCS) total knee arthroplasty (TKA) includes a dual cam-post mechanism with an asymmetric bearing geometry that promotes normal knee kinematics and enhances anterior-posterior stability. However, it is unclear whether the improved biomechanics after guided-motion BCS TKA reproduce soft tissue strain similar to the strain generated by native knees. The purpose of this cadaveric study was to compare medial collateral ligament (MCL) strain between native and guided-motion BCS TKA knees using a video extensometer. Materials and Methods: Eight cadaver knees were mounted onto a customized knee squatting simulator to measure MCL strain during flexion in both native and guided-motion BCS TKA knees (Journey II-BCS; Smith & Nephew, Memphis, TN, USA). MCL strain was measured using a video extensometer (Mercury® RT RealTime tracking system, Sobriety s.r.o, Kurim, Czech Republic). MCL strain level and strain distribution during knee flexion were compared between the native and guided-motion BCS TKA conditions. Results: The mean and peak MCL strain were similar between native and guided-motion BCS TKA knees at all flexion angles (p > 0.1). MCL strain distribution was similar between native and BCS TKA knees at 8 of 9 regions of interest (ROIs), while higher MCL strain was observed after BCS TKA than in the native knee at 1 ROI in the mid portion of the MCL at early flexion angles (p < 0.05 at ≤30° of flexion). Conclusions: Guided-motion BCS TKA restored the amount and distribution of MCL strain to the values observed on native knees.

Efficacy of thermoplastic polyurethane and gelatin blended nanofibers covered stent graft in the porcine iliac artery.

Stent-grafts composed of expanded polytetrafluoroethylene (e-PTFE), polyethylene terephthalate (PET) and polyurethane (PU) are characterized by poor endothelialization, high modulus, and low compliance, leading to thrombosis and intimal hyperplasia. A composite synthetic/natural matrix is considered a promising alternative to conventional synthetic stent-grafts. This study aimed to investigate the efficacy of thermoplastic polyurethane (TPU) and gelatin (GL) blended nanofibers (NFs) covered stent-graft in the porcine iliac artery. Twelve pigs were randomly sacrificed 7 days (n = 6) and 28 days (n = 6) after stent-graft placement. The thrombogenicity score at 28 days was significantly increased compared at 7 days (p < 0.001). The thickness of neointimal hyperplasia, degree of inflammatory cell infiltration, and degree of collagen deposition were significantly higher at 28 days than at 7 days (all p < 0.001). The TPU and GL blended NFs-covered stent-grafts successfully maintained the patency for 28 days in the porcine iliac artery. Although thrombosis with neointimal tissue were observed, no subsequent occlusion of the stent-graft was noted until the end of the study. Composite synthetic/natural matrix-covered stent-grafts may be promising for prolonging stent-graft patency.

Restoration of the Joint Line Configuration Reproduces Native Mid-Flexion Biomechanics after Total Knee Arthroplasty: A Matched-Pair Cadaveric Study.

Background: Recent evidence supports that restoration of the pre-arthritic condition via total knee arthroplasty (TKA) is associated with improved post-TKA performance and patient satisfaction. However, whether the restored pre-arthritic joint line simulates the native mid-flexion biomechanics remains unclear. Objective: We performed a matched-pair cadaveric study to explore whether restoration of the joint line via kinematically aligned (KA) TKA reproduced native knee biomechanics more accurately than the altered joint line associated with mechanically aligned (MA) TKA. Methods: Sixteen fresh-frozen cadaveric knees (eight pairs) were affixed onto a customized knee-squatting simulator for measurement of femoral rollback and medial collateral ligament (MCL) strain during mid-flexion. One knee from each cadaver was randomly designated to the KA TKA group (with the joint line restored to the pre-arthritic condition) and the other to the MA TKA group (with the joint line perpendicular to the mechanical axis). Optical markers were attached to all knees and rollback was analyzed using motion capture cameras. A video extensometer measured real-time variations in MCL strain. The kinematics and MCL strain prior to and following TKA were measured for all specimens. Results: KA TKA was better for restoring the knee kinematics to the native condition than MA TKA. The mid-flexion femoral rollback and axial rotation after KA TKA were consistently comparable to those of the native knee. Meanwhile, those of MA TKA were similar only at ≤40° of flexion. Furthermore, KA TKA better restored the mid-flexion MCL strain to that of the native knee than MA TKA. Over the entire mid-flexion range, the MCL strain of KA TKA and native knees were similar, while the strains of MA TKA knees were more than twice those of native knees at >20° of flexion. Conclusions: The restored joint line after KA TKA effectively reproduced the native mid-flexion rollback and MCL strain, whereas the altered joint line after MA TKA did not. Our findings may explain why patients who undergo KA TKA experience superior outcomes and more natural knee sensations during daily activities than those treated via MA TKA.

Pancarpal dissociation, a very rare type of injury: A case report.

RATIONALE: Pan-carpal dissociation is very rare injury and there is little information as to diagnosis, treatment, and prognosis of this injury. PATIENT CONCERNS: A 35-year-man presented to our hospital with severe pain and swelling of the left wrist and forearm after slipping and falling while riding a motorcycle. DIAGNOSIS: The wrist simple radiographs demonstrated unrecognizable severe fracture-dislocation of the carpal bones concomitant with fractures of the radioulnar shaft. Three-dimensional computed tomography revealed a capitate fracture-dislocation, as well as hamate dislocation, lunotriquetral (LT), and scapholunate (SL) dissociation. These findings suggested pan-carpal dissociation. INTERVENTIONS: To prevent compartment syndrome, fasciotomy, carpal tunnel release, and open reduction and plate fixation for both bone fracture were performed first. Then, for pan-carpal dissociation, the capitate, carpometacarpal joint (CMCJ), and hamate were reduced and fixed first. Then, the SL, LT, and other intercarpal ligaments were repaired. Finally, additional trans-carpal pins to reinforce the ligament repair and 2.0 mm plate to buttress the third CMCJ were fixed. The patient was instructed to begin gentle range of motion exercises of the wrist with pins from four weeks after surgery and all pins were removed at six weeks postoperatively. OUTCOMES: 12 months after the operation, the patient exhibited almost full range of motion with mild pain with VAS (Visual analogue scale) 1-2 at rest and VAS 3-4 with effort. Quick DASH (the disabilities of the arm, shoulder and hand) score was 25 and modified Mayo score was 70. The radiographs demonstrated union of the radioulnar shaft, and the carpal bone alignment was successfully maintained. LESSONS: Pan-carpal dissociation can be diagnosed in patients with capitate fracture-dislocation, hamate dislocation, LT, and SL dissociation. This pattern of injury is very rare and the authors recommend reduction and fixation of the distal carpal row, followed by the proximal row to facilitate an easy approach to the distal carpal row. Although it is very severe injury, rigid anatomical fixation and an early rehabilitation can lead to favorable functional outcomes.

Occupant safety effectiveness of proactive safety seat in autonomous emergency braking.

The proactive safety seat (PSS) is a recently developed active safety system for securing occupant safety in out-of-seat position (OOSP), which was applied in the Hyundai Genesis G80 in 2020. However, there has not been sufficient quantifiable verification supporting the effectiveness of the PSS. The present study was performed to determine the effectiveness of the PSS for occupant safety in OOSP and to identify areas for additional improvement. Six test conditions were considered to determine the effectiveness of the PSS for augmentation of occupant safety in OOSP. Ten healthy men participated in the tests. Compared with the no PSS condition, maximum head excursion and neck rotation were significantly decreased in the PSS condition by 0.6-0.8-fold and 0.6-0.7-fold, respectively (P < 0.05). The PSS condition in which the seat pan was moved forward to the mid position showed a greater effect in reducing the characteristic motions related to submarining, compared with the condition in which the seat pan was moved rearward to the mid position (P < 0.05). These results suggested that PSS augments occupant safety in OOSP. This study provides valuable insights in ameliorating risks to the occupant in unintended seat positions before braking and/or collision.

Kinematically aligned total knee arthroplasty restores more native medial collateral ligament strain than mechanically aligned total knee arthroplasty.

PURPOSE: Kinematically aligned total knee arthroplasty (KA TKA) targets restoration of patient-specific alignment and soft tissue laxity. However, whether KA TKA reproduces native soft tissue strain remains unclear. This cadaveric study tested the hypothesis that KA TKA would better restore the quantitative strain and strain distribution of medial collateral ligament (MCL) to the native healthy knee compared to mechanically aligned (MA) TKA. METHODS: Twenty-four fresh-frozen cadaver knees (12 pairs) were mounted on a customized knee squatting simulator to measure MCL strain during flexion. For each pair, one knee was assigned to KA TKA and the other to MA TKA. During KA TKA, the amount of femur and tibia resected was equivalent to implant thickness without MCL release using the calipered measuring technique. MA TKA was performed using conventional measured resection techniques. MCL strain was measured using a video extensometer (Mercury® RT RealTime tracking system, Sobriety s.r.o, Czech Republic). MCL strain and strain distribution during knee flexion were measured, and the measurements compared between native and post-TKA conditions. RESULTS: Mean and peak MCL strain were similar between KA TKA and native knees at all flexion angles (p > 0.1 at all flexion angles) while mean strain at all flexion angles and peak strain at ≥ 60º of MA TKA were approximately twice those of the native knees (p < 0.05 at ≥ 60º of flexion). In addition, greater MCL strain was observed in 4 of 12 regions of interest (ROI) after MA TKA (M1, M2, P1 and P2) compared to the native knee, whereas after KA TKA, MCL strain measurements were similar at all but 1 ROI (P2). CONCLUSIONS: KA TKA restored a more native amount and distribution of MCL strain compared to MA TKA. These findings provide clues for understanding why patients may experience better performance and more normal knee sensations after KA TKA compared to MA TKA. LEVEL OF EVIDENCE: Therapeutic study, Level I.

Advances and Innovations of 3D Bioprinting Skin.

Three-dimensional (3D) bioprinted skin equivalents are highlighted as the new gold standard for alternative models to animal testing, as well as full-thickness wound healing. In this review, we focus on the advances and innovations of 3D bioprinting skin for skin regeneration, within the last five years. After a brief introduction to skin anatomy, 3D bioprinting methods and the remarkable features of recent studies are classified as advances in materials, structures, and functions. We will discuss several ways to improve the clinical potential of 3D bioprinted skin, with state-of-the-art printing technology and novel biomaterials. After the breakthrough in the bottleneck of the current studies, highly developed skin can be fabricated, comprising stratified epidermis, dermis, and hypodermis with blood vessels, nerves, muscles, and skin appendages. We hope that this review will be priming water for future research and clinical applications, that will guide us to break new ground for the next generation of skin regeneration.

Enhanced osseointegration through direct energy deposition porous coating for cementless orthopedic implant fixation.

Direct energy deposition (DED) is a newly developed 3D metal printing technique that can be utilized on a porous surface coating of joint implants, however there is still a lack of studies on what advantages DED has over conventional techniques. We conducted a systematic mechanical and biological comparative study of porous coatings prepared using the DED method and other commercially available technologies including titanium plasma spray (TPS), and powder bed fusion (PBF). DED showed higher porosity surface (48.54%) than TPS (21.4%) and PBF (35.91%) with comparable fatigue cycle. At initial cell adhesion, cells on DED and PBF surface appeared to spread well with distinct actin stress fibers through immunofluorescence study. It means that the osteoblasts bind more strongly to the DED and PBF surface. Also, DED surface showed higher cell proliferation (1.27 times higher than TPS and PBF) and osteoblast cell activity (1.28 times higher than PBF) for 2 weeks culture in vitro test. In addition, DED surface showed better bone to implant contact and new bone formation than TPS in in vivo study. DED surface also showed consistently good osseointegration performance throughout the early and late period of osseointegration. Collectively, these results show that the DED coating method is an innovative technology that can be utilized to make cementless joint implants.

Polyphenols-loaded electrospun nanofibers in bone tissue engineering and regeneration.

Bone is a complex structure with unique cellular and molecular process in its formation. Bone tissue regeneration is a well-organized and routine process at the cellular and molecular level in humans through the activation of biochemical pathways and protein expression. Though many forms of biomaterials have been applied for bone tissue regeneration, electrospun nanofibrous scaffolds have attracted more attention among researchers with their physicochemical properties such as tensile strength, porosity, and biocompatibility. When drugs, antibiotics, or functional nanoparticles are taken as additives to the nanofiber, its efficacy towards the application gets increased. Polyphenol is a versatile green/phytochemical small molecule playing a vital role in several biomedical applications, including bone tissue regeneration. When polyphenols are incorporated as additives to the nanofibrous scaffold, their combined properties enhance cell attachment, proliferation, and differentiation in bone tissue defect. The present review describes bone biology encompassing the composition and function of bone tissue cells and exemplifies the series of biological processes associated with bone tissue regeneration. We have highlighted the molecular mechanism of bioactive polyphenols involved in bone tissue regeneration and specified the advantage of electrospun nanofiber as a wound healing scaffold. As the polyphenols contribute to wound healing with their antioxidant and antimicrobial properties, we have compiled a list of polyphenols studied, thus far, for bone tissue regeneration along with their in vitro and in vivo experimental biological results and salient observations. Finally, we have elaborated on the importance of polyphenol-loaded electrospun nanofiber in bone tissue regeneration and discussed the possible challenges and future directions in this field.

Motion Responses by Occupants in Out-of-Seat Positions During Autonomous Emergency Braking.

The occupant's posture can be changeable to an inadvertent or unintentional out-of-seat position (OOSP) depend on their convenience. Understanding for OOSP has been demanded, but it is not sufficient; especially when AEB is activated. The aim of the current study was to characterize the motion responses of an occupant in various OOSPs when AEB is activated and to identify if there were any additional risks of injury or discomfort to the occupant. The normal seat position (NSP) and three OOSPs were defined to compare the difference of human responses, and six healthy males were participated. Particularly, the maximum rotation angles of the neck in OOSP2 and OOSP3 differed significantly around 1.3 ± 0.3 and 1.4 ± 0.2 times higher respectively than from in the NSP (p < 0.05). Occupants assuming OOSP3 exhibited motion characteristics were not restrained effectively and characterized a hovering and falling upper body and a slipping pelvis. This study has identified, for the first time, a potential risk of injury or discomfort when AEB is activated while an occupant is in an OOSP. This study may serve as fundamental data for the development of safety system that can improve restraint and counteract any deterioration in occupant safety.

Comparison of Three Different Internal Brace Augmentation Techniques for Scapholunate Dissociation: A Cadaveric Biomechanical Study.

Internal bracing (IB) is an augmentation method using high-strength nonabsorbable tape. However, there is no detailed information about the direction, location, or number of IBs required for scapholunate interosseous ligament (SLIL) injury repair. Thus, this study compared the biomechanical characteristics of short-transverse IB, long-oblique IB, and the combination of short-transverse and long-oblique (Combo) IB for SLIL injury in a biomechanical cadaveric model. We prepared nine fresh-frozen full upper extremity cadaveric specimens for this study. The scapholunate distance, scapholunate angle, and radioscaphoid angle were measured using the MicroScribe digitizing system with the SLIL intact, after scapholunate dissociation and the three different reconstructions. Three-dimensional digital records were obtained in six wrist positions in each experimental condition. Short-transverse IB had a similar effect compared with long-oblique IB in addressing the widening of the scapholunate distance. However, both were less effective than Combo IB. For scaphoid flexion deformity, short-transverse IB had minimal effect, while long-oblique IB had a similar effect compared to Combo IB. Combo IB was the most effective for improving distraction intensity and rotational strength. This study provides important information about the biomechanical characteristics of three different IB methods for SLIL injury and may be useful to clinicians in treating scapholunate dissociation.

Optimal Position of Attachment for Removable Thermoplastic Aligner on the Lower Canine Using Finite Element Analysis.

Malocclusion is considered as a developmental disorder rather than a disease, and it may be affected by the composition and proportions of masseter muscle fibers. Orthodontics is a specialty of dentistry that deals with diagnosis and care of various irregular bite and/or malocclusion. Recent developments of 3D scanner and 3D printing technology has led to the use of a removable thermoplastic aligner (RTA), which is widely used due to its aesthetic excellence, comfortableness, and time efficiency. However, orthodontics using only an RTA has lower treatment efficacy and accuracy due to the differing movement of teeth from the plan. In order to improve these disadvantages, attachments were used, and biomechanical analyses were performed with and without them. However, there is insufficient research on the movement of teeth and the transfer of load according to the attachment position and shape. Therefore, in our study, we aimed to identify the optimal shape and position of attachments by analyzing various shapes and positions of attachments. Through 3D finite element analysis (FEA), simple tooth shape and mandibular canine shape were extracted in order to construct the orthodontics model which took into account the various shapes and positions of attachments. The optimal shape of a cylinder was derived through the FEA of simple tooth shape and analyzing various positions of attachments on teeth revealed that fixing the attachments at the lingual side of the tooth rather than the buccal side allowed for torque control and an effective movement of the teeth. Therefore, we suggest fixing the attachments at the lingual side rather than the buccal side of the tooth to induce effective movement of teeth in orthodontic treatment with the RTA in case of canine teeth.

Internal Bracing Augmentation for Scapholunate Interosseous Ligament Repair: A Cadaveric Biomechanical Study.

PURPOSE: Internal bracing (IB) is an augmentation method using high-strength nonabsorbable tape. This study compared scapholunate interosseous ligament (SLIL) repair alone, SLIL repair with IB augmentation (RIBA), and native intact SLIL (NIS) in a biomechanical cadaveric model. METHODS: We used 21 specimens of fresh-frozen wrists in this study (7 matched pairs, SLIL repair-only and SLIL RIBA groups; and 7 independent fresh-frozen wrists, NIS group). In the SLIL RIBA group, augmentation using IB was performed after the repair. The specimens were preloaded and cyclically loaded in tension. Maximum extension and hysteresis were measured in all specimens. The specimens were subsequently tested for load to failure. Failure load (yield point load, mean ultimate load, and load at clinical failure) and linear stiffness were calculated. RESULTS: In cyclic tensile testing, RIBA showed lower maximum extension and lower hysteresis than repair alone. In load to failure testing, the yield point load was statistically higher in the RIBA (59.3 N) group than in the repair-only (30.4 N) group but showed no significant difference compared with the NIS (90.7 N) groups. Moreover, the RIBA (98.5 N) group showed higher and lower mean ultimate loads than the repair-only (37.7 N) and NIS (211.8 N) groups, respectively. Load at clinical failure was higher with RIBA than with repair alone (3-mm extension: 70.0 vs 26.4 N; 4-mm extension: 84.1 vs 33.4 N). Repair alone and RIBA had comparable linear stiffness (38.2 vs 44.1 N/mm). CONCLUSIONS: Although SLIL RIBA did not recreate biomechanical properties equivalent to those of NIS, it demonstrated a significantly higher strength than repair alone. CLINICAL RELEVANCE: Repair with IB augmentation could serve as a novel surgical technique that enhances SLIL direct repair through biomechanical support.

Mechanical Assessment of Fatigue Characteristics between Single- and Multi-Directional Cyclic Loading Modes on a Dental Implant System.

Mechanical testing based on ISO 14801 standard is generally used to evaluate the performance of the dental implant system according to material and design changes. However, the test method is difficult to reflect on the clinical environment because the ISO 14801 standard does not take into account the various loads from different directions during chewing motion. In addition, the fracture pattern of the implant system can occur both in the horizontal and the vertical directions. Therefore, the purpose of this study was to compare fatigue characteristics and fracture patterns between single directional loading conditions based on the ISO 14801 standard and multi-directional loading condition. Firstly, the static test was performed on five specimens to derive the fatigue load, and the fatigue load was chosen as 40% of the maximum load measured in the static test. Subsequently, the fatigue test was performed considering the single axial/occlusal (AO), AO with facial/lingual (AOFL) and AO with mesial/distal (AOMD) directions, and five specimens were used for each fatigue loading modes. In order to analyze the fatigue characteristics, the fatigue cycle at the time of specimen fracture and displacement change of the specimen every 500 cycles were measured. Field emission scanning electron microscopy (FE-SEM) was used to analyze the fracture patterns and the fracture surface. Compared to the AO group, the fatigue cycle of the AOFL and AOMD groups showed lower about five times, while the displacement gradually increased with every 500 cycles. From FE-SEM results, there were no different surface morphology characteristics among three groups. However, the AOMD group showed a vertical slip band. Therefore, our results suggest that the multi-directional loading mode under the worst-case environment can reproduce the vertical fracture pattern in the clinical situation and may be essential to reflect on the dental implant design including connection types and surface treatments.

Osteo-Compatibility of 3D Titanium Porous Coating Applied by Direct Energy Deposition (DED) for a Cementless Total Knee Arthroplasty Implant: in Vitro and in Vivo Study.

: Direct energy deposition (DED) technology has gained increasing attention as a new implant surface technology that replicates the porous structure of natural bones facilitating osteoblast colonization and bone ingrowth. However, concerns have arisen over osteolysis or chronic inflammation that could be caused by Cobalt-chrome (CoCr) alloy and Titanium (Ti) nanoparticles produced during the fabrication process. Here, we evaluated whether a DED Ti-coated on CoCr alloy could improve osteoblast colonization and osseointegration in vitro and in vivo without causing any significant side effects. Three types of implant CoCr surfaces (smooth, sand-blasted and DED Ti-coated) were tested and compared. Three cell proliferation markers and six inflammatory cytokine markers were measured using SaOS2 osteoblast cells. Subsequently, X-ray and bone histomorphometric analyses were performed after implantation into rabbit femur. There were no differences between the DED group and positive control in cytokine assays. However, in the 5-bromo-2'-deoxyuridine (BrdU) assay the DED group exhibited even higher values than the positive control. For bone histomorphometry, DED was significantly superior within the 1000 µm bone area. The results suggest that DED Ti-coated metal printing does not affect the osteoblast viability or impair osseointegration in vitro and in vivo. Thus, this technology is biocompatible for coating the surfaces of cementless total knee arthroplasty (TKA) implants.

Titanium Porous Coating Using 3D Direct Energy Deposition (DED) Printing for Cementless TKA Implants: Does It Induce Chronic Inflammation?

Because of the recent technological advances, the cementless total knee arthroplasty (TKA) implant showed satisfactory implant survival rate. Newly developed 3D printing direct energy deposition (DED) has superior resistance to abrasion as compared to traditional methods. However, there is still concern about the mechanical stability and the risk of osteolysis by the titanium (Ti) nanoparticles. Therefore, in this work, we investigated whether DED Ti-coated cobalt-chrome (CoCr) alloys induce chronic inflammation reactions through in vitro and in vivo models. We studied three types of implant surfaces (smooth, sand-blasted, and DED Ti-coated) to compare their inflammatory reaction. We conducted the in vitro effect of specimens using the cell counting kit-8 (CCK-8) assay and an inflammatory cytokine assay. Subsequently, in vivo analysis of the immune profiling, cytokine assay, and histomorphometric evaluation using C57BL/6 mice were performed. There were no significant differences in the CCK-8 assay, the cytokine assay, and the immune profiling assay. Moreover, there were no difference for semi-quantitative histomorphometry analysis at 4 and 8 weeks among the sham, smooth, and DED Ti-coated samples. These results suggest that DED Ti-coated printing technique do not induce chronic inflammation both in vitro and in vivo. It has biocompatibility for being used as a surface coating of TKA implant.