Direct Imaging of Carrier Funneling in a Dielectric Engineered 2D Semiconductor.

In atomically thin transition-metal dichalcogenides (TMDCs), the environmental sensitivity of the strong Coulomb interaction offers promising approaches to create spatially varying potential landscapes in the same continuous material by tuning its dielectric environment. Thus, allowing for control of transport. However, a scalable and CMOS-compatible method for achieving this is required to harness these effects in practical applications. In addition, because of their ultrashort lifetime, observing the spatiotemporal dynamics of carriers in monolayer TMDCs, on the relevant time scale, is challenging. Here, we pattern and deposit a thin film of hafnium oxide (HfO2) via atomic layer deposition (ALD) on top of a monolayer of WSe2. This allows for the engineering of the dielectric environment of the monolayer and design of heterostructures with nanoscale spatial resolution via a highly scalable postsynthesis methodology. We then directly image the transport of photoexcitations in the monolayer with 50 fs time resolution and few-nanometer spatial precision, using a pump probe microscopy technique. We observe the unidirectional funneling of charge carriers, from the unpatterned to the patterned areas, over more than 50 nm in the first 20 ps with velocities of over 2 × 103 m/s at room temperature. These results demonstrate the possibilities offered by dielectric engineering via ALD patterning, allowing for arbitrary spatial patterns that define the potential landscape and allow for control of the transport of excitations in atomically thin materials. This work also shows the power of the transient absorption methodology to image the motion of photoexcited states in complex potential landscapes on ultrafast time scales.

Production of Magnetic Arsenic-Phosphorus Alloy Nanoribbons with Small Band Gaps and High Hole Conductivities.

Quasi-1D nanoribbons provide a unique route to diversifying the properties of their parent 2D nanomaterial, introducing lateral quantum confinement and an abundance of edge sites. Here, a new family of nanomaterials is opened with the creation of arsenic-phosphorus alloy nanoribbons (AsPNRs). By ionically etching the layered crystal black arsenic-phosphorus using lithium electride followed by dissolution in amidic solvents, solutions of AsPNRs are formed. The ribbons are typically few-layered, several micrometers long with widths tens of nanometers across, and both highly flexible and crystalline. The AsPNRs are highly electrically conducting above 130 K due to their small band gap (ca. 0.035 eV), paramagnetic in nature, and have high hole mobilities, as measured with the first generation of AsP devices, directly highlighting their properties and utility in electronic devices such as near-infrared detectors, quantum computing, and charge carrier layers in solar cells.

Room-Temperature Photoluminescence Mediated by Sulfur Vacancies in 2D Molybdenum Disulfide.

Atomic defects in monolayer transition metal dichalcogenides (TMDs) such as chalcogen vacancies significantly affect their properties. In this work, we provide a reproducible and facile strategy to rationally induce chalcogen vacancies in monolayer MoS2 by annealing at 600 °C in an argon/hydrogen (95%/5%) atmosphere. Synchrotron X-ray photoelectron spectroscopy shows that a Mo 3d5/2 core peak at 230.1 eV emerges in the annealed MoS2 associated with nonstoichiometric MoSx (0 < x < 2), and Raman spectroscopy shows an enhancement of the ∼380 cm-1 peak that is attributed to sulfur vacancies. At sulfur vacancy densities of ∼1.8 × 1014 cm-2, we observe a defect peak at ∼1.72 eV (referred to as LXD) at room temperature in the photoluminescence (PL) spectrum. The LXD peak is attributed to excitons trapped at defect-induced in-gap states and is typically observed only at low temperatures (≤77 K). Time-resolved PL measurements reveal that the lifetime of defect-mediated LXD emission is longer than that of band edge excitons, both at room and low temperatures (∼2.44 ns at 8 K). The LXD peak can be suppressed by annealing the defective MoS2 in sulfur vapor, which indicates that it is possible to passivate the vacancies. Our results provide insights into how excitonic and defect-mediated PL emissions in MoS2 are influenced by sulfur vacancies at room and low temperatures.

Rehydration before Application Improves Functional Properties of Lyophilized Lactiplantibacillus plantarum HAC03.

Preservation of probiotics by lyophilization is considered a method of choice for developing stable products. However, both direct consumption and reconstitution of dehydrated probiotic preparations before application "compromise" the survival and functional characteristics of the microorganisms under the stress of the upper gastro-intestinal tract. We evaluated the impact of different food additives on the viability, mucin adhesion, and zeta potential of a freeze-dried putative probiotic, Lactiplantibacillus (Lp.) plantarum HAC03. HAC03-compatible ingredients for the formulation of ten rehydration mixtures could be selected. Elevated efficacy was achieved by the B-active formulation, a mixture of non-protein nitrogen compounds, sugars, and salts. The survival of Lp. plantarum HAC03 increased by 36.36% compared rehydration with distilled water (4.92%) after passing simulated gastro-intestinal stress conditions. Cell viability determined by plate counting was confirmed by flow cytometry. B-active formulation also influenced Lp. plantarum HAC03 functionality by increasing its adherence to a Caco-2 cell-line and by changing the bacterial surface charge, measured as zeta potential.Hydrophobicity, mucin adhesion and immunomodulatory properties of Lp. plantarum HAC03 were not affected by the B-active formulation. The rehydration medium also effectively protected Lp. plantarum ATCC14917, Lp. plantarum 299v, Latilactobacillus sakei (Lt.) HAC11, Lacticaseibacillus (Lc.) paracasei 532, Enterococcus faecium 200, and Lc. rhamnosus BFE5263.

Safety Evaluation and Whole-Genome Annotation of Lactobacillus plantarum Strains from Different Sources with Special Focus on Isolates from Green Tea.

Lactobacillus plantarum shows high intraspecies diversity species, and has one of the largest genome sizes among the lactobacilli. It is adapted to diverse environments and provides a promising potential for various applications. The aim of the study was to investigate the safety and probiotic properties of 18 L. plantarum strains isolated from fermented food products, green tea, and insects. For preliminary safety evaluation the L. plantarum strains were tested for their ability to produce hemolysin and biogenic amines and for their antibiotic resistance. Based on preliminary safety screening, four strains isolated from green tea showed antibiotic resistance below the cut-off MIC values suggested by EFSA, and were selected out of the 18 strains for more detailed studies. Initial selection of strains with putative probiotic potential was determined by their capacity to survive in the human GIT using an in vitro simulation model, and for their adhesion to human Caco-2/TC-7 cell line. Under simulated GIT conditions, all four L. plantarum strains isolated from green tea showed higher survival rates than the control (L. plantarum subsp. plantarum ATCC 14917). All studied strains were genetically identified by 16S rRNA gene sequencing and confirmed to be L. plantarum. In addition, whole-genome sequence analysis of L. plantarum strains APsulloc 331261 and APsulloc 331263 from green tea was performed, and the outcome was compared with the genome of L. plantarum strain WCFS1. The genome was also annotated, and genes related to virulence factors were searched for. The results suggest that L. plantarum strains APsulloc 331261 and APsulloc 331263 can be considered as potential beneficial strains for human and animal applications.

Determination of the molecular assembly of actin and actin-binding proteins using photoluminescence.

Actin, the most abundant protein in cells, polymerizes into filaments that play key roles in many cellular dynamics. To understand cell dynamics and functions, it is essential to examine the cytoskeleton structure organized by actin and actin-binding proteins. Here, we pave the way for determining the molecular assembly of the actin cytoskeleton using direct photonic in situ analysis, providing the photoluminescence characteristics of actin as a function of filament length and bundling, without labeling. In experiments for monomeric and filamentous actin reconstituted in vitro, structural forms of actin are identified from the peak positions and intensities of photoluminescence. Actin monomers exhibited small intensity emission peaks at 334 nm, whereas filamentous and bundled actin showed a shifted peak at 323 nm with higher intensity. The peak shift was found to be proportional to the length of the actin filament. With probing structural change of actin in various cells in vivo, our study provides an efficient and precise analytical in situ tool to examine the cytoskeleton structure. It will be beneficial for elucidating the mechanism of various cellular functions such as cell migration, differentiation, cytokinesis and adhesion. Furthermore, our technique can be applied to detect the alterations in the cell cytoskeleton that can occur during many pathological processes.

Reduced graphene oxide enwrapped phosphors for long-term thermally stable phosphor converted white light emitting diodes.

The long-term instability of the presently available best commercial phosphor-converted light-emitting diodes (pcLEDs) is the most serious obstacle for the realization of low-cost and energy-saving lighting applications. Emission from pcLEDs starts to degrade after approximately 200 h of operation because of thermal degradation of the phosphors. We propose a new strategy to overcome this thermal degradation problem of phosphors by wrapping the phosphor particles with reduced graphene oxide (rGO). Through the rGO wrapping, we have succeeded in controlling the thermal degradation of phosphors and improving the stability of fabricated pcLEDs. We have fabricated pcLEDs with long-term stability that maintain nearly 98% of their initial luminescence emission intensity even after 800 h of continuous operation at 85 °C and 85% relative humidity. The pcLEDs fabricated using SrBaSi2O2N2:Eu2+ phosphor particles wrapped with reduced graphene oxide are thermally stable because of enhanced heat dissipation that prevents the ionization of Eu2+ to Eu3+. We believe that this technique can be applied to other rare-earth doped phosphors for the realization of highly efficient and stable white LEDs.

Radio frequency based label-free detection of glucose.

We investigated the frequency based mediator-free glucose sensor in the radio-frequency (RF) range. Frequency dependent power signal showed clear dependence on the glucose concentration with free enzymatic condition. Also, the passive electrical components such as the resistance, inductance, shunt conductance, and capacitance were extracted based on the transmission line model for further analysis. These various parameters proposed by the signal processing provided more effective verification for instant multi-components in-situ readings without any added supporters. Additionally the residual signal (RS), impedance (Z), and propagation constant (γ) were also calculated from measured S-parameters for glucose analysis. These parameters basically showed amplitude variation and interestingly, some parameters such as inductance and impedance showed frequency shift of resonance dip. The results support that the frequency based sensing technique including the parameter based analysis can enable effective multi-dimensional detection of glucose. Moreover, this technique showed that glucose sensing is also possible over a diabetic patient's serum.

Controlling the luminescence emission from palladium grafted graphene oxide thin films via reduction.

The role of palladium (Pd) in the reduction of graphene oxide (GO) thin films was investigated using a Pd assisted grafting technique. The structural and optical characteristics of these thin films were obtained from various spectroscopic analyses, which confirmed increased C[double bond, length as m-dash]C-C aromatic ring vibration and oxidation of Pd with Ar annealing. In Pd free GO, annealing of films resulted in restoration of sp(2) clusters; however, Pd grafting with non-annealed film enhanced the possibility of restoration and further annealing dramatically increased the restoration rate with enhanced blue photoluminescence (PL) emission. The blue PL emission originates from sp(2) cluster sites and the yellow-green PL from defect trapped states. As reduction of GO increased, yellow-green emission decreased and blue PL became the prominent emission. These experimental findings open up a new feasible pathway for controlling the luminescence emission from graphene oxide that furthers the technological advancement of graphene based optoelectronic devices.

Dioscin: a synergistic tyrosinase inhibitor from the roots of Smilax china.

In our study, we investigated the inhibition of mushroom tyrosinase in Smilax china. A methanol (MeOH) extract of S. china was partitioned into hexane, ethyl acetate (EtOAc) and water. Of the three fractions, EtOAc extract showed the strongest inhibition of tyrosinase activity with l-tyrosine or l-DOPA as a substrate. Two compounds were isolated from a final active fraction by activity-guided column chromatography. These compounds were identified as dioscin and oxyresveratrol by comparing their mass, (1)H- and (13)C-NMR spectral data with those reported in the literature. Dioscin showed little inhibition activity of tyrosinase, whereas oxyresveratrol, a known tyrosinase inhibitor, showed a strong tyrosinase inhibitory activity. We discovered that a mixture of oxyresveratrol and dioscin (IC(50)=5.1 and 5.7 µg/ml) highly increased the inhibition of tyrosinase activity with l-tyrosine or l-DOPA as the substrate as compared to either oxyresveratrol (IC(50)=7.8 and 10.9 µg/ml) or dioscin (IC(50)>100 and 100 µg/ml) alone.