Star-shaped hole transporting materials with a triazine unit for efficient perovskite solar cells.

Novel star-shaped hole transporting materials with a triazine unit have been synthesized. When the new Triazine-Th-OMeTPA was used as a hole transporting material in perovskite solar cells, the power conversion efficiency reached 12.51% under AM 1.5 G (100 mW cm(-2)) illumination, showing competitive photovoltaic performance with the widely used spiro-OMeTAD based solar cell (13.45%).

Graphene nanoplatelets doped with N at its edges as metal-free cathodes for organic dye-sensitized solar cells.

Challenging precious Pt-based electrocatalysts for dye-sensitized solar cells (DSSCs), graphene nanoplatelets that are N-doped at the edges (NGnPs) are prepared via simply ball-milling graphite in the presence of nitrogen gas. DSSCs based on specific nanoplatelets designated "NGnP5" display superior photovoltaic performance (power conversion efficiency, 10.27%) compared to that of conventional Pt-based devices (9.96%). More importantly, the NGnP counter electrode exhibits outstanding electrochemical stability and electrocatalytic activity with a cobalt-complex redox couple.

Direct nitrogen fixation at the edges of graphene nanoplatelets as efficient electrocatalysts for energy conversion.

Nitrogen fixation is essential for the synthesis of many important chemicals (e.g., fertilizers, explosives) and basic building blocks for all forms of life (e.g., nucleotides for DNA and RNA, amino acids for proteins). However, direct nitrogen fixation is challenging as nitrogen (N2) does not easily react with other chemicals. By dry ball-milling graphite with N2, we have discovered a simple, but versatile, scalable and eco-friendly, approach to direct fixation of N2 at the edges of graphene nanoplatelets (GnPs). The mechanochemical cracking of graphitic C--C bonds generated active carbon species that react directly with N2 to form five- and six-membered aromatic rings at the broken edges, leading to solution-processable edge-nitrogenated graphene nanoplatelets (NGnPs) with superb catalytic performance in both dye-sensitized solar cells and fuel cells to replace conventional Pt-based catalysts for energy conversion.

Organic sensitizers featuring a planar indeno[1,2-b]-thiophene for efficient dye-sensitized solar cells.

An efficient organic sensitizer (JK-306) featuring a planar indeno[1,2-b]thiophene as the π-linker of a bridging unit for dye-sensitized solar cells (DSSCs) was synthesized. The sensitizer had a strong molar absorption coefficient and a red-shifted absorption band compared with JK-305, which resulted in a significant increase in the short-circuit photocurrent density. We incorporated a highly congested bulky amino group into the 2',4'-dihexyloxybiphenyl-4-yl moiety, an electron donor, to diminish the charge recombination and to prevent aggregation of the sensitizer. Under standard AM 1.5G solar conditions, JK-306-sensitized cells in the presence of co-adsorbents chenodeoxycholic acid (CDCA) and 4-[bis(9,9-dimethyl-9H-fluoren-2-yl)amino]benzoic acid (HC-A), which afforded an overall conversion efficiency of 8.37% and 8.52%, respectively. Upon changing the I(-) /I3 (-) electrolyte to the Co(II) /Co(III) redox couple, the cell gave rise to a significantly improved conversion efficiency of 10.02% with the multifunctional HC-A, which is one of the highest values reported for DSSCs with a cobalt-based electrolyte. Furthermore, the JK-306-based solar cell with a polymer gel electrolyte revealed a high conversion efficiency of 7.61%, which is one of the highest values for cells based on organic sensitizers.

N-Doped graphene nanoplatelets as superior metal-free counter electrodes for organic dye-sensitized solar cells.

Highly efficient counter electrodes (CEs) for dye-sensitized solar cells (DSSCs) were developed using thin films of scalable and high-quality, nitrogen-doped graphene nanoplatelets (NGnP), which was synthesized by a simple two-step reaction sequence. The resultant NGnP was deposited on fluorine-doped SnO2 (FTO)/glass substrates by using electrospray (e-spray) coating, and their electrocatalytic activities were systematically evaluated for Co(bpy)3(3+/2+) redox couple in DSSCs with an organic sensitizer. The e-sprayed NGnP thin films exhibited outstanding performances as CEs for DSSCs. The optimized NGnP electrode showed better electrochemical stability under prolonged cycling potential, and its Rct at the interface of the CE/electrolyte decreased down to 1.73 Ω cm(2), a value much lower than that of the Pt electrode (3.15 Ω cm(2)). The DSSC with the optimized NGnP-CE had a higher fill factor (FF, 74.2%) and a cell efficiency (9.05%), whereas those of the DSSC using Pt-CE were only 70.6% and 8.43%, respectively. To the best of our knowledge, the extraordinarily better current-voltage characteristics of the DSSC-NGnP outperforming the DSSC-Pt for the Co(bpy)3(3+/2+) redox couple (in paticular, FF and short circuit current, Jsc) is highlighted for the first time.

Effects of side-chain interdigitation on stability: an environmentally, electrically, and thermally stable semiconducting polymer.

A polymeric semiconductor, poly(3,6-dihexyl-[2,2']bi[thieno[3,2-b]thiophene]) (PDHTT), was synthesized and tested as an active layer in organic thin film transistors (OTFTs). This semiconductor showed considerable potential for use in commercial electronic devices because of its superior characteristics, particularly its good stability. PDHTT-based OTFTs exhibited high stability in air, retaining their initial performance after exposure to 70% relative humidity for 50 days; they were also stable under repeated electrical stress and even after exposure to temperatures as high as 250 °C. We attribute the remarkable stability of PDHTT OTFTs to the relatively low highest occupied molecular orbital (5.1 eV) level of the polymer and its highly interdigitated structure in the thin film state.

A new class of cyclometalated ruthenium sensitizers of the type CNN for efficient dye-sensitized solar cells.

A new class of cyclometalated ruthenium sensitizers incorporating a CNN ligand and conjugated 2,2'-bipyridine in the ancillary ligand have been designed and synthesized. The photovoltaic performance of JK-206 using an electrolyte containing 0.6 M 1,2-dimethyl-3-propylimidazolium iodide, 0.05 M I(2), 0.1 M LiI, and 0.5 M tert-butylpyridine in CH(3)CN gave a short-circuit photocurrent density of 19.63 mA cm(-2), an open-circuit voltage of 0.74 V, and a fill factor of 0.72, affording an overall conversion efficiency of 10.39%. The efficiency is the highest one reported for dye-sensitized solar cells based on the cyclometalated ruthenium sensitizer of the type CNN. Moreover, the same device using a polymer gel electrolyte exhibited a remarkable stability under 1000 h of light soaking at 60 °C, retaining 91% of the initial efficiency of 7.14%.

New efficient ruthenium sensitizers with unsymmetrical indeno[1,2-b]thiophene or a fused dithiophene ligand for dye-sensitized solar cells.

Two novel ruthenium sensitizers containing unsymmetrical indeno[1,2-b]thiophene or a fused dithiophene unit in the ancillary ligand have been designed and synthesized. The photovoltaic performance of JK-188 using an electrolyte consisting of 0.6 M 1,2-dimethyl-3-propylimidazolium iodide, 0.05 M I(2), 0.1 M LiI, 0.05 M guanidinium thiocyanate, and 0.5 M tert-butylpyridine in acetonitrile revealed a short-circuit photocurrent density of 18.60 mA/cm(2), an open-circuit voltage of 0.72 V, and a fill factor of 0.71, yielding an overall conversion efficiency of 9.54%. The cell exhibits a remarkable stability under 1000 h of light soaking at 60 °C using a quasi-solid-state electrolyte consisting of 5 wt % poly(vinylidenefluoride-co-hexafluoropropylene), 0.6 M 1-propyl-2,3-dimethylimidazolium iodide, 0.5 M N-methylbenzimidazole, and 0.1 M I(2) in 3-methoxypropionitrile, retaining 97% of the initial efficiency (7.38%).