Determination of Physicochemical Characteristics, Phytochemical Profile and Antioxidant Activity of Various Clover Honeys.

This paper reports on some physicochemical and phytochemical characteristics (i. e. pH, electrical conductivity, colour, moisture content, total phenolic content, sugar profile) and in vitro antioxidant activity of honeys harvested from five legume species, red clover (Trifolium pratense), balansa clover (T. michelianum), Persian clover (T. resupinatum), purple clover (T. purpureum) and sanfoin, also known as holy clover (Onobrychis viciifolia), that were grown in enclosed shade houses to ensure that the honeys' characteristics are reflective of a truly monofloral honey. Glucose and fructose, determined via High-Performance Thin-Layer Chromatography (HPTLC) analysis, were found as the main sugars in all investigated honeys with the ratio of fructose to glucose ranging from 1 : 1.2 to 1 : 1.6. The honeys' pH values ranged from 3.9 to 4.6 which met Codes Alimentarius (CA) requirements. The moisture content was found to be between 17.6 and 22.2 % which in some cases was slightly higher than CA requirements (≤20 %). The honeys' colour values, prior and after filtration, were between 825.5-1149.5 mAU and 532.4-824.8 mAU respectively, illustrating golden yellow to deep yellow hues. The total phenolic content (TPC) of the honeys was determined using a modified Folin-Ciocalteu assay. Their antioxidant activity was captured by the Ferric Reducing-Antioxidant Power (FRAP) assay as well as HPTLC analysis coupled with 2,2-diphenyl-1-picrylhydrazyl (DPPH) derivatisation. The highest total phenolic content was found in red clover honey (45.4 mg GAE/100 g) whereas purple clover honey showed the highest level of activity in the FRAP assay (7.3 mmol Fe2+/kg). HPTLC-DPPH analysis of the honeys' organic extracts demonstrated the presence of various bioactive compounds that contribute to their overall antioxidant activity. This study developed a methodology for producing monofloral clover honeys in a space limited, enclosed production system, which allowed to collate important baseline data for these honeys that can serve as the foundation for their potential future development into commercial honeys, including honeys that can be used for medicinal purposes.

Clinical efficacy of crushed prednisolone and hydrocolloid powder in the primary treatment of peristomal pyoderma gangrenosum and correlation to in vitro drug release data.

We evaluated the primary application of crushed prednisolone combined with hydrocolloid powder for clinically diagnosed peristomal pyoderma gangrenosum (PPG). We present our data on this cohort and follow-up of our previous patients. Of the 23 patients who were commenced on this regime, 18 healed (78%). Twenty-two patients commenced on this regime as the primary treatment for their PPG, and for one, it was a rescue remedy after failed conventional therapy. Four patients with significant medical comorbidities failed to heal and one had their stomal reversal surgery before being fully healed. The proposed treatment regime for PPG is demonstrated to be effective, inexpensive and able to be managed in the patient's usual home environment. In vitro drug release analysis was undertaken, and data are presented to provide further insights into the efficacy of this regime.

In Vitro Assessment of Wound-Healing Efficacy of Stabilized Basic Fibroblast Growth Factor (FGF-2) Solutions.

Chronic tympanic membrane perforations (TMP) pose a significant clinical challenge, but basic fibroblast growth factor (FGF-2) shows promise for their treatment, despite its instability in aqueous solutions which hampers the sustained delivery crucial for the healing process. Addressing this, our research focused on the development of stabilized FGF-2 formulations, F5 and F6, incorporating dual, generally regarded as safe (GRAS) excipients to enhance stability and therapeutic efficacy. F5 combined FGF-2 (1600 ng/mL) with 0.05% w/v methylcellulose (MC) and 20 mM alanine, while F6 used FGF-2 with 0.05% w/v MC and 1 mg/mL human serum albumin (HSA). Our findings demonstrate that these novel formulations not only significantly improve the cytoproliferation of human dermal fibroblasts but also exhibit the most potent chemoattractant effects, leading to the highest fibroblast monolayer closure rates (92.5% for F5 and 94.1% for F6 within 24 h) compared to other FGF-2 solutions tested. The comparable performance of F5 and F6 underscores their potential as innovative, less invasive, and cost-effective options for developing otic medicinal products aimed at the effective treatment of chronic TMP.

Taste-Masked Flucloxacillin Powder Part 1: Optimisation of Fabrication Process Using a Mixture Design Approach.

It is extremely challenging to formulate age-appropriate flucloxacillin medicines for young children, because flucloxacillin sodium (FS) has a lingering, highly bitter taste, dissolves quickly in saliva, and requires multiple daily dosing at relatively large doses for treating skin infections. In this paper, we describe a promising taste-masked flucloxacillin ternary microparticle (FTM) formulation comprising FS, Eudragit EPO (EE), and palmitic acid (PA). To preserve the stability of the thermolabile and readily hydrolysed flucloxacillin, the fabrication process employed a non-aqueous solvent evaporation method at ambient temperature. Optimisation of the fabrication method using a mixture design approach resulted in a robust technique that generated stable and reproducible FTM products. The optimised method utilised only a single solvent evaporation step and minimal amounts of ICH class III solvents. It involved mixing two solution phases-FS dissolved in ethanol:acetone (1:4 v/v), and a combination of EE and PA dissolved in 100% ethanol-to give a ternary FS:EE:PA system in ethanol: acetone (3:1 v/v). Solvent evaporation yielded the FTMs containing an equimolar ratio of FS:EE:PA (1:0.8:0.6 w/w). The fabrication process, after optimisation, demonstrated robustness, reproducibility, and potential scalability.

Taste-Masked Flucloxacillin Powder Part 2: Formulation Optimisation Using the Mixture Design Approach and Storage Stability.

Flucloxacillin is prescribed to treat skin infections but its highly bitter taste is poorly tolerated in children. This work describes the application of the D-optimal mixture experimental design to identify the optimal component ratio of flucloxacillin, Eudragit EPO and palmitic acid to prepare flucloxacillin taste-masked microparticles that would be stable to storage and would inhibit flucloxacillin release in the oral cavity while facilitating the total release of the flucloxacillin load in the lower gastrointestinal tract (GIT). The model predicted ratio was found to be very close to the stoichiometric equimolar component ratio, which supported our hypothesis that the ionic interactions among flucloxacillin, Eudragit EPO and palmitic acid underscore the polyelectrolyte complex formation in the flucloxacillin taste-masked microparticles. The excipient-drug interactions showed protective effects on the microparticle storage stability and minimised flucloxacillin release at 2 min in dissolution medium. These interactions had less influence on flucloxacillin release in the dissolution medium at 60 min. Storage temperature and relative humidity significantly affected the chemical stability of the microparticles. At the preferred storage conditions of ambient temperature under reduced RH of 23%, over 90% of the baseline drug load was retained in the microparticles at 12 months of storage.

Paediatric Medicinal Formulation Development: Utilising Human Taste Panels and Incorporating Their Data into Machine Learning Training.

This review paper explores the role of human taste panels and artificial neural networks (ANNs) in taste-masking paediatric drug formulations. Given the ethical, practical, and regulatory challenges of employing children, young adults (18-40) can serve as suitable substitutes due to the similarity in their taste sensitivity. Taste panellists need not be experts in sensory evaluation so long as a reference product is used during evaluation; however, they should be screened for bitterness taste detection thresholds. For a more robust evaluation during the developmental phase, considerations of a scoring system and the calculation of an acceptance value may be beneficial in determining the likelihood of recommending a formulation for further development. On the technological front, artificial neural networks (ANNs) can be exploited in taste-masking optimisation of medicinal formulations as they can model complex relationships between variables and enable predictions not possible previously to optimise product profiles. Machine learning classifiers may therefore tackle the challenge of predicting the bitterness intensity of paediatric formulations. While advancements have been made, further work is needed to identify effective taste-masking techniques for specific drug molecules. Continuous refinement of machine learning algorithms, using human panellist acceptability scores, can aid in enhancing paediatric formulation development and overcoming taste-masking challenges.

Application of a Customised Franz-Type Cell Coupled with HPTLC to Monitor the Timed Release of Bioactive Components in Complex Honey Matrices.

The aim of this study was to assess the release profile of components in five different honeys (a New Zealand Manuka and two Western Australian honeys, a Jarrah honey and a Coastal Peppermint honey) and their corresponding honey-loaded gel formulations using a custom-designed Franz-type diffusion cell in combination with High-Performance Thin-Layer Chromatography (HPTLC). To validate the suitability of the customised setup, release data using this new approach were compared with data obtained using a commercial Franz cell apparatus, which is an established analytical tool to monitor the release of active ingredients from topical semisolid products. The release profiles of active compounds from pure honey and honey-loaded formulations were found to be comparable in both types of Franz cells. For example, when released either from pure honey or its corresponding pre-gel formulation, the percentage release of two Jarrah honey constituents, represented by distinct bands at RF 0.21 and 0.53 and as analysed by HPTLC, was not significantly different (p = 0.9986) at 12 h with over 99% of these honey constituents being released in both apparatus. Compared to the commercial Franz diffusion cell, the customised Franz cell offers several advantages, including easy and convenient sample application, the requirement of only small sample quantities, a large diffusion surface area, an ability to analyse 20 samples in a single experiment, and lower cost compared to purchasing a commercial Franz cell. Thus, the newly developed approach coupled with HPTLC is conducive to monitor the release profile of minor honey constituents from pure honeys and honey-loaded semisolid formulations and might also be applicable to other complex natural-product-based products.

Design, Preparation, and Physicochemical Characterisation of Alginate-Based Honey-Loaded Topical Formulations.

Honey has widespread use as a nutritional supplement and flavouring agent. Its diverse bioactivities, including antioxidant, antimicrobial, antidiabetic, anti-inflammatory, and anticancer properties, have also made it an aspirant natural product for therapeutic applications. Honey is highly viscous and very sticky, and its acceptance as a medicinal product will require formulation into products that are not only effective but also convenient for consumers to use. This study presents the design, preparation, and physicochemical characterisation of three types of alginate-based topical formulations incorporating a honey. The honeys applied were from Western Australia, comprising a Jarrah honey, two types of Manuka honeys, and a Coastal Peppermint honey. A New Zealand Manuka honey served as comparator honey. The three formulations were a pre-gel solution consisting of 2-3% (w/v) sodium alginate solution with 70% (w/v) honey, as well as a wet sheet and a dry sheet. The latter two formulations were obtained by further processing the respective pre-gel solutions. Physical properties of the different honey-loaded pre-gel solutions (i.e., pH, colour profile, moisture content, spreadability, and viscosity), wet sheets (i.e., dimension, morphology, and tensile strength) and dry sheets (i.e., dimension, morphology, tensile strength, and swelling index) were determined. High-Performance Thin-Layer Chromatography was applied to analyse selected non-sugar honey constituents to assess the impacts of formulation on the honey chemical composition. This study demonstrates that, irrespective of the honey type utilised, the developed manufacturing techniques yielded topical formulations with high honey content while preserving the integrity of the honey constituents. A storage stability study was conducted on formulations containing the WA Jarrah or Manuka 2 honey. The samples, appropriately packaged and stored over 6 months at 5, 30, and 40 °C, were shown to retain all physical characteristics with no loss of integrity of the monitored honey constituents.

Monitoring the Release of Methylglyoxal (MGO) from Honey and Honey-Based Formulations.

Methylglyoxal (MGO) is considered to be one of the vital components responsible for the anti-bacterial activity of Leptospermum spp. (Manuka) honey. While many studies have demonstrated a dose-dependent antibacterial activity for MGO in vitro, from a therapeutic viewpoint, it is also important to confirm its release from Manuka honey and also from Manuka honey-based formulations. This study is the first to report on the release profile of MGO from five commercial products containing Manuka honey using a Franz diffusion cell and High-Performance Liquid Chromatography (HPLC) analysis. The release of MGO expressed as percentage release of MGO content at baseline was monitored over a 12 h period and found to be 99.49 and 98.05% from an artificial honey matrix and NZ Manuka honey, respectively. For the investigated formulations, a time-dependent % MGO release between 85% and 97.18% was noted over the 12 h study period.

Antioxidant Activity and Phenolic Compound Identification and Quantification in Western Australian Honeys.

This study reports on the total phenolic content and antioxidant activity as well as the phenolic compounds that are present in Calothamnus spp. (Red Bell), Agonis flexuosa (Coastal Peppermint), Corymbia calophylla (Marri) and Eucalyptus marginata (Jarrah) honeys from Western Australia. The honey's total phenolic content (TPC) was determined using a modified Folin-Ciocalteu assay, while their total antioxidant activity was determined using FRAP and DPPH assays. Phenolic constituents were identified using a High Performance Thin-Layer Chromatography (HTPLC)-derived phenolic database, and the identified phenolic compounds were quantified using HPTLC. Finally, constituents that contribute to the honeys' antioxidant activity were identified using a DPPH-HPTLC bioautography assay. Based on the results, Calothamnus spp. honey (n = 8) was found to contain the highest (59.4 ± 7.91 mg GAE/100 g) TPC, followed by Eucalyptus marginata honey (50.58 ± 3.76 mg GAE/100 g), Agonis flexuosa honey (36.08 ± 4.2 mg GAE/100 g) and Corymbia calophylla honey (29.15 ± 5.46 mg GAE/100 g). In the FRAP assay, Calothamnus spp. honey also had the highest activity (9.24 ± 1.68 mmol Fe2+/kg), followed by Eucalyptus marginata honey (mmol Fe2+/kg), whereas Agonis flexuosa (5.45 ± 1.64 mmol Fe2+/kg) and Corymbia calophylla honeys (4.48 ± 0.82 mmol Fe2+/kg) had comparable FRAP activity. In the DPPH assay, when the mean values were compared, it was found that Calothamnus spp. honey again had the highest activity (3.88 ± 0.96 mmol TE/kg) while the mean DPPH antioxidant activity of Eucalyptus marginata, Agonis flexuosa, and Corymbia calophylla honeys were comparable. Kojic acid and epigallocatechin gallate were found in all honeys, whilst other constituents (e.g., m-coumaric acid, lumichrome, gallic acid, taxifolin, luteolin, epicatechin, hesperitin, eudesmic acid, syringic acid, protocatechuic acid, t-cinnamic acid, o-anisic acid) were only identified in some of the honeys. DPPH-HPTLC bioautography demonstrated that most of the identified compounds possess antioxidant activity, except for t-cinnamic acid, eudesmic acid, o-anisic acid, and lumichrome.

A Comprehensive HPTLC-Based Analysis of the Impacts of Temperature on the Chemical Properties and Antioxidant Activity of Honey.

Honeys are commonly subjected to a series of post-harvest processing steps, such as filtration and/or radiation treatment and heating to various temperatures, which might affect their physicochemical properties and bioactivity levels. Therefore, there is a need for robust quality control assessments after honey processing and storage to ensure that the exposure to higher temperatures, for example, does not compromise the honey's chemical composition and/or antioxidant activity. This paper describes a comprehensive short-term (48 h) and long-term (5 months) study of the effects of temperature (40 °C, 60 °C and 80 °C) on three commercial honeys (Manuka, Marri and Coastal Peppermint) and an artificial honey, using high-performance thin-layer chromatography (HPTLC) analysis. Samples were collected at baseline, at 6 h, 12 h, 24 h and 48 h, and then monthly for five months. Then, they were analysed for potential changes in their organic extract HPTLC fingerprints, in their HPTLC-DPPH total band activities, in their major sugar composition and in their hydroxymethylfurfural (HMF) content. It was found that, while all the assessed parameters changed over the monitoring period, changes were moderate at 40 °C but increased significantly with increasing temperature, especially the honeys' HPTLC-DPPH total band activity and HMF content.

The Development and Application of a HPTLC-Derived Database for the Identification of Phenolics in Honey.

This study reports on the development and validation of a HPTLC-derived database to identify phenolic compounds in honey. Two database sets are developed to contain the profiles of 107 standard compounds. Rich data in the form of Rf values, colour hues (H°) at 254 nm and 366 nm, at 366 nm after derivatising with natural product PEG reagent, and at 366 nm and white light after derivatising with vanillin-sulfuric acid reagent, λ max and λ min values in their fluorescence and λ max values in their UV-Vis spectra as well as λ max values in their fluorescence and UV-Vis spectra after derivatisation are used as filtering parameters to identify potential matches in a honey sample. A spectral overlay system is also developed to confirm these matches. The adopted filtering approach is used to validate the database application using positive and negative controls and also by comparing matches with those identified via HPLC-DAD. Manuka honey is used as the test honey and leptosperine, mandelic acid, kojic acid, lepteridine, gallic acid, epigallocatechin gallate, 2,3,4-trihydroxybenzoic acid, o-anisic acid and methyl syringate are identified in the honey using the HPTLC-derived database.

Optimisation of an agar overlay assay for the assessment of the antimicrobial activity of topically applied semi-solid antiseptic products including honey-based formulations.

The aim of this study was to optimise the so-called agar overlay assay to investigate the antimicrobial activity of some currently available topical antimicrobial products against a range of Gram positive and Gram negative bacteria. During the optimisation process, various assay parameters including base agar volume, overlay agar volume, overlay agar concentration, placement of products into wells or onto coverslip and inoculum concentration were taken into consideration. The optimised assay was found to be a convenient, suitable and effective platform for the assessment of the antimicrobial activity of commercial semi-solid over-the-counter (OTC) products (i.e. non-prescription medicines for topical application used commonly without supervision by a healthcare professional) containing a range of active pharmaceutical ingredients and to be potentially also applicable to complex natural product-based formulations (e.g. honey-based formulation, melaleuca oil-based formulation). The most auspicious aspect of the optimised method was its capability of determining the antimicrobial activity of intact products without further manipulation, unlike other tests that require products to be dissolved or dilute, thus compromising their integrity.

Upconversion Nanoparticle-Based Cell Membrane-Coated cRGD Peptide Bioorthogonally Labeled Nanoplatform for Glioblastoma Treatment.

Glioblastoma is hard to be eradicated partly because of the obstructive blood-brain barrier (BBB) and the dynamic autophagy activities of glioblastoma. Here, hydroxychloroquine (HDX)-loaded yolk-shell upconversion nanoparticle (UCNP)@Zn0.5Cd0.5S nanoparticle coating with the cyclic Arg-Gly-Asp (cRGD)-grafted glioblastoma cell membrane for near-infrared (NIR)-triggered treatment of glioblastoma is prepared for the first time. UCNPs@Zn0.5Cd0.5S (abbreviated as YSN, yolk-shell nanoparticle) under NIR radiation will generate reactive oxygen species for imposing cytotoxicity. HDX, the only available autophagy inhibitor in clinical studies, can enhance cytotoxicity by preventing damaged organelles from being recycled. The cRGD-decorated cell membrane allowed the HDX-loaded nanoparticles to efficiently bypass the BBB and specifically target glioblastoma cells. Exceptional treatment efficacy of the NIR-triggered chemotherapy and photodynamic therapy was achieved in U87 cells and in the mouse glioblastoma model as well. Our results provided proof-of-concept evidence that HDX@YSN@CCM@cRGD could overcome the delivery barriers and achieve targeted treatment of glioblastoma.

Development of an Add-On Device Using 3D Printing for the Enhancement of Drug Administration Efficiency of Dry Powder Inhalers (Accuhaler).

The goal of this study was to develop an add-on device for dry powder inhalers (Accuhaler) via 3D printing to improve drug administration efficiency in patients with limited inspiratory capacity, including young children, the elderly, and those with chronic obstructive pulmonary disease. With salmeterol xinafoate and fluticasone propionate as model active pharmaceutical ingredients (API), the emitted API doses were used to assess the effectiveness of the add-on device. The APIs were quantified by an HPLC assay validated for specificity, range, linearity, accuracy, and precision. The motor power of the add-on device could be regulated to moderate fan speed and the air flow in the assembled device. When 50-100% of the fan motor power of the add-on device was used, the emitted dose from the attached dry powder inhaler (DPI) was increased. A computational fluid dynamics application was used to simulate the air and particle flow in the DPI with the add-on device in order to elucidate the operating mechanism. The use of the add-on device combined with a sufficient inhalation flow rate resulted in a larger pressure drop and airflow velocity at the blister pocket. As these characteristics are associated with powder fluidization, entrainment, and particle re-suspension, this innovative add-on device might be utilized to enhance the DPI emitted drug dose for patients with low inspiratory rates and to facilitate the provision of adequate drug doses to achieve the treatment outcomes.

A Review of Commonly Used Methodologies for Assessing the Antibacterial Activity of Honey and Honey Products.

Honey, a naturally sweet and viscous substance is mainly produced by honeybees (Apis mellifera) from flower nectar. Honey exerts a plethora of biological and pharmacological activities, namely, antioxidant, antimicrobial and anti-inflammatory activity, because of the presence of an extensive variety of bioactive compounds. The antibacterial activity is one of the most reported biological properties, with many studies demonstrating that honey is active against clinically important pathogens. As a result, beside honey's widespread utilization as a common food and flavouring agent, honey is an attractive natural antimicrobial agent. However, the use of neat honey for therapeutic purposes poses some problems, for instance, its stickiness may hamper its appeal to consumers and health care professionals, and the maintenance of an adequate therapeutic concentration over a sufficient timeframe may be challenging due to honey liquidity and leakage. It has motivated researchers to integrate honey into diverse formulations, for example, hydrogels, dressings, ointments, pastes and lozenges. The antibacterial activity of these formulations should be scientifically determined to underscore claims of effectiveness. Some researchers have made efforts to adapt the disc carrier and suspension test to assess the antimicrobial activity of topical products (e.g., silver-based wound dressings). However, there is currently no established and validated method for determining the in vitro antimicrobial potential of natural product-based formulations, including those containing honey as the active principle. Against the backdrop of a brief discussion of the parameters that contribute to its antibacterial activity, this review provides an outline of the methods currently used for investigating the antibacterial activity of neat honey and discusses their limitations for application to honey-based formulations.

A Review of the Phytochemistry and Bioactivity of Clover Honeys (Trifolium spp.).

This review covers a comprehensive overview of the phytoconstituents and bioactivities reported to date for clover honeys produced from various Trifolium spp. against the backdrop of a more general discussion of the chemistry and bioactivity of these important agricultural species. While research into the phytochemical composition of various honeys and their associated bioactivities is growing, this review demonstrates that the literature to date has seen only a limited number of studies on clover honeys. Surprisingly, there appear to be no comparative data on the concentration of flavonoids in general or isoflavonoids specifically in different clover honeys, although the latter have been identified as a main group of bioactive compounds in red clover plants. Based on the findings of this review, the presence of phytoestrogenic isoflavonoids (e.g., formononetin, biochanin A, genistein, daidzein, glycitein) in clover plants and, by extension, in clover honeys should be further investigated, specifically of clover species outside the three popular perennial clovers (red, white and alsike clovers) to exploit new opportunities of potential benefit to both the pharmaceutical and apiculture industries.

Effects of Formulation on the Palatability and Efficacy of In-Feed Praziquantel Medications for Marine Finfish Aquaculture.

Praziquantel (PZQ) provides an effective treatment against monogenean parasitic infestations in finfish. However, its use as an in-feed treatment is challenging due to palatability issues. In this study, five formulations of PZQ beads (1−4 mm) were developed using marine-based polymers, with allicin added as a flavouring agent. All formulations attained PZQ loading rates ≥74% w/w, and the beads were successfully incorporated into fish feed pellets at an active dietary inclusion level of 10 g/kg. When tested for palatability and digestibility in small yellowtail kingfish, the PZQ-loaded beads produced with alginate-chitosan, alginate-Cremophor® RH40, and agar as carriers resulted in high consumption rates of 99−100% with no digesta or evidence of beads in the gastrointestinal tract (GIT) of fish fed with diets containing either formulation. Two formulations produced using chitosan-based carriers resulted in lower consumption rates of 68−75%, with undigested and partly digested beads found in the fish GIT 3 h post feeding. The PZQ-loaded alginate-chitosan and agar beads also showed good palatability in large (≥2 kg) yellowtail kingfish infected with gill parasites and were efficacious in removing the parasites from the fish, achieving >90% reduction in mean abundance relative to control fish (p < 0.001). The two effective formulations were stable upon storage at ambient temperature for up to 18 months, showing residual drug content >90% compared with baseline levels. Overall, the palatability, efficacy and stability data collected from this study suggest that these two PZQ particulate formulations have potential applications as in-feed anti-parasitic medications for the yellowtail kingfish farming industry.

A Comprehensive Survey of Phenolic Constituents Reported in Monofloral Honeys around the Globe.

The aim of this review is to provide a comprehensive overview of the large variety of phenolic compounds that have to date been identified in a wide range of monofloral honeys found globally. The collated information is structured along several themes, including the botanical family and genus of the monofloral honeys for which phenolic constituents have been reported, the chemical classes the phenolic compounds can be attributed to, and the analytical method employed in compound determination as well as countries with a particular research focus on phenolic honey constituents. This review covers 130 research papers that detail the phenolic constituents of a total of 556 monofloral honeys. Based on the findings of this review, it can be concluded that most of these honeys belong to the Myrtaceae and Fabaceae families and that Robinia (Robinia pseudoacacia, Fabaceae), Manuka (Leptospermum scoparium, Myrtaceae), and Chestnut (Castanea sp., Fagaceae) honeys are to date the most studied honeys for phenolic compound determination. China, Italy, and Turkey are the major honey phenolic research hubs. To date, 161 individual phenolic compounds belonging to five major compound groups have been reported, with caffeic acid, gallic acid, ferulic acid and quercetin being the most widely reported among them. HPLC with photodiode array detection appears to be the most popular method for chemical structure identification.

Australian Honeypot Ant (Camponotus inflatus) Honey-A Comprehensive Analysis of the Physiochemical Characteristics, Bioactivity, and HPTLC Profile of a Traditional Indigenous Australian Food.

Despite its cultural and nutritional importance for local Aboriginal people, the unusual insect honey produced by Western Australian honeypot ant (Camponotus inflatus) has to date been rarely investigated. This study reports on the honey's physicochemical properties, its total phenolic, major sugars and 5-hydroxymethylfurfural contents, and its antioxidant activities. The honey's color value is 467.63 mAU/63.39 mm Pfund, it has a pH of 3.85, and its electric conductivity is 449.71 µSiemens/cm. Its Brix value is 67.00, corresponding to a 33% moisture content. The total phenolics content is 19.62 mg gallic acid equivalent/100 g honey. Its antioxidant activity measured using the DPPH* (2,2-diphenyl-1-picrylhydrazyl) and FRAP (ferric reducing-antioxidant power) assays is 1367.67 µmol Trolox/kg and 3.52 mmol Fe+2/kg honey, respectively. Major sugars in the honey are glucose and fructose, with a fructose-to-glucose ratio of 0.85. Additionally, unidentified sugar was found in minor quantities.