Drain vs no drain placement after retromuscular ventral hernia repair with mesh: an ACHQC analysis.

INTRODUCTION: Ventral hernia repair (VHR) is one of the most common procedures in the United States, and drains are used in over 50% of mesh repairs. The aim of this study is to investigate the impact of drains on surgical site occurrences (SSO) and infection (SSI) after open and minimally invasive retromuscular VHR with mesh. METHODS: A retrospective review of prospectively collected data from the ACHQC was performed to include adult patients who underwent elective VHR with retromuscular mesh placement. Univariate analysis was performed comparing drain and no-drain groups. A logistic regression was performed to identify factors independently associated with increased SSO, SSI, readmission, and length of stay (LOS). RESULTS: 6945 patients underwent elective VHR with sublay mesh. Most patients had M2 and M3 hernias in both groups (with Drain and no-drain). The median LOS was 4.7 (SD 8.3) in the drain group and 1.6 (SD 8.4) in the no-drain group (p < 0.001). 30-day SSI was higher in the drain group (176; 3.8% vs 25; 1.1%; p < 0.001). Despite lower SSO overall in the drain group (470; 10.0% vs 286; 12.7%; p < 0.001), SSO or SSI requiring intervention (SSOPI) was higher in the drain group (240; 5.1% vs 44; 1.9%; p < 0.001). Logistic regression identified diabetes (OR 1.3, CI 1.1-1.6; p < 0.001) and BMI (OR 1.04, CI 1.03-1.05; p < 0.001) as predictors of SSO, while the use of a drain was protective (OR 0.61; CI 0.5-0.8; p < 0.001). For SSI, logistic regression showed diabetes (OR 1.6, CI 1.2-2.3; p = 0.004) and open approach (OR 3.5, CI 2.1-5.9; p < 0.001) as predictors. CONCLUSIONS: Drain placement during retromuscular VHR with mesh was predictive of decreased postoperative SSO occurrence but associated with increased LOS. Diabetes and open approach, but not drain use, were predictors of SSI.

Implementation of the Versius Surgical System in Complex Abdominal Wall Repair: First Reported Case of an Robotic ETEP/TAR Procedure.

BACKGROUND: Robotic ventral hernia repair has been increasing globally, with comparable outcomes to laparoscopic repair and lower rates of conversion to open surgery. Robotic surgery is increasing in popularity, and there is a number of new robotic systems entering the marketing. We report the first case of a Roboic eTEP using the Versius robotic system in a patient with an incisional hernia. METHODS: Surgery was performed using the Versius system from CMR surgical which consists of bedside units for each instrument and a console. The patient presented with an incisional hernia measuring 9.5×5 cm in the left flank. RESULTS: The patient was discharged on postoperative day (POD) 2 with a drain. There was no need for opioids. The drain was removed at POD 7. The patient presented at POD 10 with erythema and cellulitis in the area that previously had tape on it, and it was resolved with a short course of oral antibiotics. CONCLUSION: The eTEP technique for hernia surgery was safe and feasible using the Versius robotic system. Implementation is possible in experienced hands with minimal changes to the surgical techniques.

Cobalt Oxide on Boron-Doped Graphitic Carbon Nitride as Bifunctional Photocatalysts for CO2 Reduction and Hydrogen Evolution.

In this work, the prepared cobalt oxide decorated boron-doped g-C3N4 (CoOx/g-C3N4) heterojunction exhibits remarkable activity in CO2 reduction (CO2RR), resulting in high yields of CH3COOH (∼383 µmol·gcatalyst-1) and CH3OH (∼371 µmol·gcatalyst-1) with 58% selectivity to C2+ under visible light. However, the same system leads to high H2 evolution (HER) by increasing the cobalt oxide content, suggesting that the selectivity and preference for the CO2RR or HER depend on oxide decoration. By comparing HER and CO2RR evolution in the same system, this work provides critical insights into the catalytic mechanism, indicating that the CoOx/g-C3N4 heterojunction formation is necessary to foster high visible light photoactivity.

Main drivers of dragonflies and damselflies (Insecta; Odonata) metacommunities in streams inside protected areas in the Brazilian Amazon.

The evaluation of environmental and spatial influence in freshwater systems is crucial for the conservation of aquatic diversity. So, we evaluated communities of Odonata in streams inside and outside sustainable use areas in the Brazilian western Amazon. We predicted that these streams would differ regarding habitat integrity and species α and ß diversity. We also predict that environmental and spatial variables will be important for both suborders, but with more substantial effects on Zygoptera species, considering their nature of forest-specialist. The study was conducted in 35 streams, 19 inside and 16 outside sustainable use areas. The streams outside presented high species richness, abundance, and number of exclusive forest-specialist species from Zygoptera and higher scores of habitat integrity. In contrast, one sustainable use area presented the lowest values of these metrics. Besides, we found that environmental and spatial variables were significantly associated to Zygoptera species composition, but not with Anisoptera, which can be explained by their cosmopolitan nature. Our results indicated that an interplay between environmental and spatial processes determines the structure of the metacommunities of Zygoptera. The less effective dispersal rates and narrow ecological tolerance of Zygoptera species make them more influenced by local conditions and dispersal limitation, and more sensible to habitat modifications. We highlight the importance of improving the local management of the sustainable use areas by environmental agencies, mainly on areas that are losing their capacity to maintain the aquatic fauna, and implementation of social policies toward traditional people.

How Appropriate Are Recommendations of Online Chat-Based Artificial Intelligence (ChatGPT) to Common Questions on Ventral Hernia Repair?

ChatGPT is a conversational AI model developed by OpenAI to generate human-like text based on the input it receives. ChatGPT has become increasingly popular, and the general public may use this tool to ask questions about different medical conditions. There is a lack of data to demonstrate ChatGPT is able to provide reliable information on medical conditions. The aim of our study is to assess the accuracy and appropriateness of ChatGPT answers to questions on ventral hernia management.

Current trends and outcomes for unilateral groin hernia repairs in the United States using the Abdominal Core Health Quality Collaborative database: A multicenter propensity score matching analysis of 30-day and 1-year outcomes.

BACKGROUND: Different unilateral groin hernia repair approaches have been developed in the last 2 decades. The most commonly done approaches are open inguinal hernia repair by the Lichenstein technique, laparoscopic approach by either total extraperitoneal or transabdominal preperitoneal, and robotic transabdominal preperitoneal approach. Hence, this study aimed to compare early and late postoperative outcomes in patients who underwent unilateral robotic transabdominal preperitoneal, laparoscopic transabdominal preperitoneal, and laparoscopic total extraperitoneal, and open groin hernia repair using a United States national hernia database, the Abdominal Core Health Quality Collaborative Database. METHODS: Prospectively collected data from the Abdominal Core Health Quality Collaborative database was retrospectively reviewed, including all adult patients who underwent elective unilateral groin hernia repair from 2015 to 2022, with a 1:1 propensity score match analysis conducted for balanced groups. The univariate analysis compared the groups across the preoperative, intraoperative, and postoperative timeframes. RESULTS: The Abdominal Core Health Quality Collaborative database identified 14,320 patients who underwent elective unilateral groin hernia repair and had documented 30 days of follow-up. Propensity score matching stratified 1,598 patients to each group (total of 6,392). The median age was 64 years (interquartile range 53-74) for open groin hernia repair, whereas 60 (interquartile range 47-69) for laparoscopic transabdominal preperitoneal, 62 (interquartile range 48-70) for laparoscopic total extraperitoneal, and 60 (interquartile range 47-70) for robotic transabdominal preperitoneal were noted. Open groin hernia repair had more American Society of Anesthesiologists score 4 (52, 3%) patients (P < .001). A painful bulge was the most common indication (>85%). Operating room time >2 hours was more significant in the robotic transabdominal preperitoneal group (123, 8%; P < .001). Seroma rate was higher in the laparoscopic transabdominal preperitoneal (134, 8%; P < .001). A 1-year analysis had 1,103 patients. Hematoma, surgical site infection, readmission, reoperation, and hernia recurrence at 30 days or 1 year did not differ, with an overall recurrence rate of 6% (n = 67) at 1 year (P = .33). In patients with body mass index ≥30 kg/m2, the robotic approach had lower rates of surgical site occurrence (n = 12, 4%; P = .002) and seroma (n = 5, 2%; P < .001) compared with the other groups. When evaluating recurrence 1 year after surgery, the robotic transabdominal preperitoneal group had 10% versus 18% open groin hernia repair, 11% laparoscopic transabdominal preperitoneal, and 18% laparoscopic total extraperitoneal, but it was not statistically significant (P = .53). CONCLUSION: There was no difference in readmission, reoperation, and surgical site infection among the surgical techniques at 30 days. However, laparoscopic transabdominal preperitoneal was associated with more seromas. Hernia recurrence at 1 year was similar across groups; the robotic approach had the lowest recurrence rate among all 3 repairs but did not reach statistical significance. The robotic approach performed better in patients with a body mass index of 30 kg/m2 for surgical site occurrence and seroma than in other surgical techniques.

Effect of inoculum composition on the microbial community involved in the anaerobic digestion of sugarcane bagasse.

In anaerobic digestion (AD), the choice of inoculum type seems to be relevant for methane production for complex substrates, such as lignocellulosic material. Previous work demonstrated that the addition of fresh manure and ruminal fluid to anaerobic sludge improved methane productivity and kinetics of AD of crude sugarcane bagasse (CSB). Considering that the improvement of methane production could be a result of a more adapted microbial community, the present study performed the Next Generation Sequencing analysis to identify changes in the microbiome of anaerobic sludge inoculum, resulting from fresh manure and ruminal fluid addition. In comparison with AD performed only with anaerobic sludge inoculum (50:50, U), accumulated methane production was 15% higher with anaerobic sludge plus ruminal fluid inoculum (50:50, UR) and even higher (68%) with anaerobic sludge with fresh bovine manure inoculum (50:50, UFM), reaching the value of 143 NmLCH4.gVS-1. Clostridium species were highly abundant in all inocula, playing an important role during the hydrolysis and fermentation of CSB, and detoxifying potential inhibitors. Microbial composition also revealed the occurrence of Pseudomonas and Anaerobaculum at UFM inoculum that seem to have contributed to the higher methane production rate, mainly due to their hydrolytic and fermentative ability on lignocellulosic substrates. On the other hand, the presence of Alcaligenes might have had a negative effect on methane production due to their ability to perform methane oxidation.

Feasibility of Image Inversion for Ventral Hernia Repair Using the Versius System.

Background: The aim of our technical report is to demonstrate the image inversion technique in the new Versius Robotic System. Methods: We report a step-by-step surgical maneuver for robotic surgeons when performing robotic ventral hernia repair (VHR) with the Versius Robotic System. Technical Report: The image inversion artifice consists in rotating 180° with the scope using the surgeon's master control in a specific rotation command in the right-hand joystick. The assisting surgeon can do a manual inversion of the camera without the console being aware that the scope is inverted. In this scenario, the 30° Up configuration should be used while informing the console that the scope is looking down. The surgeon can reassign instruments to each joystick. This results in the right joystick controlling the left instrument and left control controlling the right instrument. Since the image is inverted, the movements will look natural on the surgeon console. Conclusions: The use of the image inversion technique with the Versius Robotic System is effective in aiding surgeons to perform the hernia defect closure during robotic VHRs.

Appropriateness of Online Chat-Based Artificial Intelligence (ChatGPT) Answers to Common Questions on Inguinal Hernia Repair.

ChatGPT is a conversational AI model developed by OpenAI designed to generate human-like text based on the input it receives. ChatGPT has become increasingly popular, and the general public may use this tool to ask questions about different medical conditions. There is a lack of data showing if ChatGPT is able to provide reliable information on medical conditions to the general public. The aim of our study is to assess the accuracy and appropriateness of ChatGPT answers to questions on inguinal hernia management.

Medial Meniscotibial Ligament of the Knee: A Step by-Step Dissection.

Objective Considerable attention has been paid to meniscotibial ligaments (MTLs), also known as coronary ligaments, especially after the "Save the Meniscus" initiative gained importance among knee surgeons. Technically challenging, the diagnosis and treatment of ramp lesion show the importance of MTLs. These ligaments were discovered long ago, but their contribution to knee stability has only recently been studied and still lacks information. Thus, the aim of the present study was to describe step-by-step an dissection technique of the medial MTL, efficient, reproducible and that may lead to further research. Method Twenty fresh cadaver knees were used, with no preference for sex or age. The knees were dissected using the same technique standardized by our team. Each dissection step was recorded digitally. Results The medial MTL was found in all 20 knees studied using the aforementioned technique. In our sample, the medial MTL exhibited an average length of 70.0 ± 13.4 mm and width of 32.25 ± 3.09 mm, thickness of 35.3 ± 2.7 mm and weight of 0.672 ± 0.134 g. In all the cases, the medial MTL originated proximally and deeply to the deep MTL in the tibia. Conclusion We describe a simple effective and reproducible medial MTL dissection technique that makes it possible to identify the ligament over the entire medial extension of the knee.

A review of experimental task design in psychophysical eye tracking research.

While eye tracking is a technique commonly used in the experimental study of higher-level perceptual processes such as visual search, working memory, reading, and scene exploration, its use for the quantification of basic visual functions (visual acuity, contrast sensitivity, color vision, motion detection) is less explored. The use of eye movement features as dependent variables in a psychophysical investigation can serve multiple roles. They can be central in studies with neurological patients or infants that cannot comply with verbal instructions, understand task demands, and/or emit manual responses. The technique may also serve a complementary role, determining the conditions under which a manual or verbal response is given, such as stimulus position in the visual field, or it can afford the analysis of new dependent variables, such as the time interval between oculomotor and manual responses. Our objective is to review the literature that applied the eye tracking technique to psychophysical problems. The two questions our review raises are: can eye movements (reflex or voluntary) be an objective index of stimulus detection in psychophysical tasks? If so, under what conditions, and how does it compare with traditional paradigms requiring manual responses? Our (non-systematic) methodological review selected studies that used video-oculography as the technique of choice and had a basic visual function as their primary object of investigation. Studies satisfying those criteria were then categorized into four broad classes reflecting their main research interest: (1) stimulus detection and threshold estimation, (2) the effects of stimulus properties on fixational eye movements, (3) the effects of eye movements on perception, and (4) visual field assessment. The reviewed studies support the idea that eye tracking is a valuable technique for the study of basic perceptual processes. We discuss methodological characteristics within each of the proposed classification area, with the objective of informing future task design.

Analysis of the Mechanical Behavior of Porcine Graft Fixation in a Polyurethane Block Using a 3D-printed PLA Interference Screw.

Objective The interest in using 3D printing in the healthcare field has grown over the years, given its advantages and potential in the rapid manufacturing of personalized devices and implants with complex geometries. Thus, the aim of the present study was to compare the mechanical fixation behavior of a 3D-printed interference screw, produced by fused deposition modeling of polylactic acid (PLA) filament, with that of a titanium interference screw. Methods Eight deep flexor porcine tendons, approximately 8 mm wide and 9 cm long, were used as graft and fixed to a 40 pounds-per-cubic-foot (PCF) polyurethane block at each of its extremities. One group was fixed only with titanium interference screws (group 1) and the other only with 3D-printed PLA screws (BR 20 2021 018283-6 U2) (group 2). The tests were conducted using an EMIC DL 10000 electromechanical universal testing machine in axial traction mode. Results Group 1 (titanium) obtained peak force of 200 ± 7 N, with mean graft deformation of 8 ± 2 mm, and group 2 (PLA) obtained peak force of 300 ± 30 N, and mean graft deformation of 7 ± 3 mm. Both the titanium and PLA screws provided good graft fixation in the polyurethane block, with no slippage or apparent deformation. In all the samples, the test culminated in graft rupture, with around 20 mm of deformation in relation to the initial length. Conclusion The 3D-printed PLA screw provided good fixation, similar to that of its titanium counterpart, producing satisfactory and promising results.

Transplant Ureter Inguinal Herniation Treated by Robotic Inguinal Hernia Repair.

Introduction: We report the case of a transplanted ureter obstructed by an inguinal herniation treated by a robotic-assisted approach. Case Report: This is a case of a 63-year-old male who had a kidney transplant with a graft on the left pelvis in September 2014, and presented to the clinic for evaluation of bilateral inguinal hernia. On physical examination he had bilateral palpable inguinal hernias, with the right one larger and only partially reducible. Computed tomography scan showed portion of urinary bladder and transplant ureter in the left inguinal hernia and mild hydroureteronephrosis in the transplanted kidney. Patient underwent catheterization of the transplant ureter where indocyanine green was injected for proper transplant ureter identification with the Firefly filter and robotic assisted hernia repair. Surgery was uneventful and patient was discharged home the same day with no further complications. Conclusion: The robotic approach using the Firefly filter was shown to be safe during the dissection to avoid injury to the transplant ureter.

Primary abandon of hernia sac for inguinoscrotal hernias: a safe way to cut corners.

INTRODUCTION: Inguinoscrotal hernias (ISH) pose a challenge to surgeons with consistently higher rates of postoperative complications and recurrence rates. The aim of this study is to report our initial experience and early results with a new technique for inguinoscrotal hernia repair. METHODS: A review of a prospectively maintained multi-center database was conducted in patients who underwent minimally invasive repair using the "primary abandon-of-the-sac" (PAS) technique for inguinoscrotal hernias from March 2021 to July 2022. Demographics and outcomes were analyzed. Univariate analysis and multivariate logistic regression were performed. RESULTS: A total of 76 minimally invasive inguinal hernia repairs were performed. In 70 patients (92%) C-PAS was used as the technique to abandon the sac while in the remaining 6 patients, "pirate-eye-patch" technique was used. Median hernia ring was 3 (IQR 2.5-3.5) cm and median hernia sac was 9.5 (8-10.8) cm. Median operative time was 70 min (IQR 56-96). Seroma was present in 22 (28.9%) patients 7 days after surgery. Most had seroma only in the inguinal area (n = 19; 25%). Thirty days after surgery, 12 (15.8%) patients still had seroma in the inguinal area and 6 (7.9%) in the inguinoscrotal area. Ninety days after surgery, four (5.3%) patients had inguinal seroma, 2 (2.6%) scrotal seromas and 3 (3.9%) inguinoscrotal seromas. The size of the hernia sac was not associated with seroma formation 7 days after surgery (OR 1.06; 95% CI 0.89-1.2; P = 0.461) in the multivariate logistic regression. BMI was also not associated with seroma formation (OR 0.8; 95% CI 0.74-1.06; P = 0.2). CONCLUSIONS: Planned abandon of the hernia sac is an interesting alternative and is associated with a low rate of complications and acceptable seroma formation rates.

Twitter and surgery: how social media can impact surgical education.

INTRODUCTION: Social media is now a ubiquitous form of communication. It has allowed individuals to connect and share ideas across the country and across the globe. Twitter allows user to share thoughts in 280-character "tweets," while also connecting these messages to community posts with hashtags. While the surgical community utilizes many social media platforms; the use of Twitter has been particularly unique. The aim of this review was to focus on several areas of Twitter utilization in surgery including: surgical education, residency training, and utilization by surgical societies. EVIDENCE ACQUISITION: The following databases were searched for studies meeting our inclusion criteria: MEDLINE, Embase, Cochraine library, ScieLO, LILACS. EVIDENCE SYNTHESIS: Selected papers discussed the use of Twitter for surgical education, social media use by residency programs, and social media use by surgical societies. CONCLUSIONS: Twitter has allowed for growth of the surgical community both locally and nationally. It allows for promotion and connectivity for surgical departments and individual surgeons. Furthermore, it is an important communication tool for surgical societies to reach members and disseminate guidelines and recommendations.

Hiatal hernia repair with biosynthetic mesh reinforcement: a qualitative systematic review.

INTRODUCTION: Reinforcement of crural closure with synthetic resorbable mesh has been proposed to decrease recurrence rates after hiatal hernia repair, but continues to be controversial. This systematic review aims to evaluate the safety, efficacy, and intermediate-term results of using biosynthetic mesh to augment the hiatus. METHODS: The Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines were followed throughout this systematic review. The Risk of Bias in Non-Randomized Studies of Interventions and Risk of Bias in Randomized Trials tools were used to perform qualitative assessment of all studies included in this review. Recommendations were then summarized for the following pre-defined key items: protocol, research question, search strategy, study eligibility, data extraction, study design, risk of bias, publication bias, and statistical analysis. RESULTS: The systematic literature search found 520 articles, 101 of which were duplicates and 355 articles were determined to be unrelated to our study and excluded. The full text of the remaining 64 articles was thoroughly assessed. A total of 18 articles (1846 patients) were ultimately included for this review, describing hiatal hernia repair using three different biosynthetic meshes-BIO-A, Phasix ST, and polyglactin mesh. Mean operative time varied from 127 to 223 min. Mean follow up varied from 12 to 54 months. There were no mesh erosions or explants. One mesh-related complication of stenosis requiring reoperation was reported with BIO-A. Studies showed significant improvement in symptom and quality-of-life scores, as well as satisfaction with surgery. Recurrence was reported as radiologic or clinical recurrence. Overall, recurrence rate varied from 0.9 to 25%. CONCLUSION: The use of biosynthetic mesh is safe and effective for hiatal hernia repair with low complications rates and high symptom resolution. The reported recurrence rates are highly variable due to significant heterogeneity in defining and evaluating recurrences. Further randomized controlled trials with larger samples and long-term follow-up should be performed to better analyze outcomes and recurrence rates.

Does the Weight Matter? Short-Term Outcomes of Lightweight Versus Heavyweight Three-Dimensional Anatomical Mesh in Minimally Invasive Inguinal Hernia Repair.

Background: The type of mesh used in inguinal hernia repairs remains controversial. There are limited data looking at specific mesh-related complications. The objective of this study is to assess postoperative 90-day outcomes in lightweight (LW) and heavyweight (HW) anatomical mesh in minimally invasive inguinal hernia repairs. Methods: A retrospective single-center database was queried for all adult minimally invasive inguinal hernia repairs with anatomical mesh from July 2016 to March 2021. Demographics and surgical outcomes were analyzed. Univariate analysis and multivariate logistic regression were performed. Results: Six hundred forty-seven minimally invasive inguinal hernia repairs were performed with 423 (65.3%) using HW and 224 (24.7%) using LW mesh. There was no difference in mean body mass index between the groups (26.9 ± 4.2 kg/m2 in the LW group and 27.1 ± 4.2 kg/m2 in the HW group; P = .69). There was no difference in type of mesh fixation used in either group, with tacker being the most common. There was no difference in postoperative emergency department (ED) visit (P = .625), readmission rates (P = .562), or postoperative complications between the two groups. Fifty patients presented with seroma within 90 days. There were five recurrences in each group and only one surgical site infection in the LW within 90 days. Multivariate logistic regression was performed, and predictors of seroma formation included age (odds ratio [OR] 1.02; confidence interval [CI] 1-1.04; P = .02) and hypertension (HTN) (OR 1.8; CI 1.03-3.4; P = .039). HW mesh was not associated with seroma formation (OR 1.04; CI 0.5-1.9; P = .895). Similarly, HW mesh was not associated with surgical site occurrences (SSO) (OR 1.04; CI 0.5-1.8; P = .872). HTN was associated with SSO (OR 1.74; CI 1-3.05; P = .048). Conclusion: Our study did not favor the use of LW or HW mesh when comparing postoperative complications or clinical outcomes. HW mesh was not associated with either seroma formation or SSO.

The Influence of Pregnancy on Weight Loss After Previous Bariatric Surgery.

Introduction: Bariatric surgery is routinely performed on obese women of reproductive age, most commonly with the laparoscopic sleeve gastrectomy (SG) and Roux-en-Y gastric bypass procedures (RYGB). This study analyzes the effects of postoperative pregnancy on excess BMI loss percentage (EBMIL%) after SG and RYGB. Methods: A retrospective study was conducted with 191 female patients of reproductive age between 20 and 40 years who underwent SG and RYGB performed at our institution between January 2017 and December 2018. A comparison of the results at 4-year follow-up was performed between patients who became pregnant after bariatric surgery with patients who did not. Results: Among 191 total cases, 32 (16.7%) patients became pregnant within a 4-year follow-up period, and 159 (83.2%) patients did not. The median postoperative body mass index (BMI) in the pregnant group was 33.3 kg/m2 (interquartile range [IQR] 30.1-38.5) and 33.5 kg/m2 (IQR 28.9-38.6) in the nonpregnant group. The mean EBMIL% within a 4-year follow-up in the pregnant group was 50.4% (standard deviation [SD] 23.5) and 55.5% (SD 30.4) in the nonpregnant group. The median weight before surgery in the pregnant group was 112 kg (IQR 107.9-132.2) and 117 kg (IQR 106-132.5) in the nonpregnant group. The median weight after surgery in the pregnant group was 89.5 kg (IQR 79.5-111) and 88.9 kg (IQR 78-103) in the nonpregnant group. There was no significant difference between outcomes. Conclusion: Weight loss maintenance after bariatric surgery is not impacted by postoperative pregnancy within a 4-year follow-up after SG and RYGB.

Tratamento de feridas complexas com prótese de PVC e enxerto parcial de pele autólogo: Protocolo acelerado e de baixo custo de cicatrização por terceira intenção / Treatment of complex wounds with PVC prosthesis and autologous partial skin graft: Accelerated and low-cost third-intention healing protocol

Introdução: Feridas complexas são lesões tegumentares graves, de difícil resolução com curativos convencionais. O objetivo deste estudo foi descrever uma técnica de cicatrização de feridas por terceira intenção, reprodutível e de baixo custo, aplicável a feridas complexas, utilizando uma prótese de policloreto de vinila (PVC) colocada temporariamente na área da lesão para promover proteção e estimular sua "granulação", seguida de enxerto autólogo de pele de espessura parcial. Método: De forma consecutiva, foram selecionados 20 pacientes com feridas complexas, decorrentes de causas externas, divididos em 2 grupos: A - pacientes que foram submetidos à técnica de cobertura com prótese de PVC, seguida de enxerto; e B - pacientes submetidos aos cuidados da equipe de curativo, com trocas diárias até granulação da ferida, padrão da nossa instituição. Os pacientes foram avaliados quanto ao tempo de internação; custos; em relação à dor local; à presença de complicações; ao tempo até a alta médica; e à satisfação do paciente. Resultados: O tempo de internamento e seus custos, assim como o tempo até a alta médica, foram menores no grupo A (p<0,05). Todavia, não houve diferença estatisticamente significativa em relação à dor local entre as técnicas A e B. Conclusão: A técnica utilizando prótese de PVC e enxerto possui boa eficácia para o tratamento de feridas complexas, sendo reprodutível e de baixo custo.

Introduction: Complex wounds are serious tegumentary injuries that are difficult to resolve with conventional dressings. This study aimed to describe a third-intention wound healing technique, reproducible and low cost, applicable to complex wounds, using polyvinyl chloride (PVC) prosthesis temporarily placed in the injured area to promote the protection and stimulate its "granulation," followed by autologous partial-thickness skin grafting. Method: Consecutively, 20 patients with complex wounds resulting from external causes were selected and divided into 2 groups: A - patients who underwent the coverage technique with PVC prosthesis, followed by grafting, and B - patients submitted to the care of the dressing team, with daily changes until wound granulation, standard in our institution. Patients were evaluated regarding length of stay; costs; local pain; complications; the time until medical discharge; and patient satisfaction. Results: The length of hospital stay, its costs, and the time until medical discharge were shorter in group A (p<0.05). However, there was no statistically significant difference in local pain between techniques A and B. Conclusion: The technique using PVC prosthesis and graft has good efficacy for treating complex wounds, being reproducible and inexpensive.