First tarsometatarsal arthrodesis for severe hallux valgus using the tension band principle - Technical tip and case series.

BACKGROUND: Hallux valgus (HV) is a common foot pathology. Severe HV in the presence of Tarsometatarsal joint (TMTJ) instability is often managed with arthrodesis of the 1st TMTJ. There are concerns regarding non-union and malunion (particularly the early loss of inter-metatarsal angle correction before complete arthrodesis). We report our medium-term results of a small series of patients that underwent an evolved surgical technique utilising orthogonal staples and a transverse suture button fixation to address biomechanical concerns with traditional Lapidus arthrodesis. METHODS: A retrospective study of a consecutive series of patients who underwent this surgical technique between February 2017 and May 2022. Clinical outcomes were validated through Patient-reported outcomes measures (PROMS); EuroQol-5 Dimension (EQ-5D) and Manchester-Oxford Foot Questionnaires (MOXFQ). Radiographic parameters (hallux valgus (HVA), intermetatarsal (IMA), distal metatarsal articular angle (DMAA)) were assessed. Union of the arthrodesis and complications were recorded. RESULTS: During the study period, 9 feet underwent the procedure. Radiographic data was available for all nine and PROMS data for seven (77.8%). Significant improvement occurred in all radiographic deformity parameters at mean 6-month follow-up. Mean ± standard deviation correction calculated preoperatively as HVA 40.2°, IMA 19.3° and DMAA 15.8°, corrected to HVA 15.4°, IMA 5.8° and DMAA 5.9° postoperatively. (HVA; P < 0.001, IMA; P < 0.001, DMAA; P < 0.001) Clinical PROMs at mean follow-up of 2 years were MOXFQ 34.4 ± 25.2, EQ-5D-5 L 0.819 ± 0.150 and VAS pain 13.6 ± 13.6. There were no cases of non-union, Tibialis anterior tendon irritation or hallux varus. Complications included first MTPJ stiffness in one case and CRPS and dorsiflexion malunion of the first ray in another patient. CONCLUSION: This preliminary study of the procedure used in this series confirm this is a safe surgical technique to address severe HV with a low rate of non-union and significant radiographic improvements. A larger patient dataset is needed to evaluate this procedure robustly.

First Metatarsophalangeal Joint Replacement in a Patient With Monostotic Fibrous Dysplasia and Associated Metatarsophalangeal Arthritis.

Fibrous dysplasia (FD) is a benign disorder characterized by the replacement of normal bone tissue with fibrous connective tissue, making the bone more susceptible to fractures and increasing the risk of developing degenerative arthritis in multiple joints. We present an unusual case of monostotic FD affecting the first metatarsal, accompanied by metatarsophalangeal (MTP) arthritis, which caused difficulties in walking, pain, and reduced quality of life. The patient underwent the first MTP joint replacement using the mobile bearing ROTOglide™ first MTP joint replacement system; the use of this specific implant for this indication appears to be a novel aspect in the existing literature. Following the operation, the patient returned to normal activities, experiencing improvements in pain, walking, and quality of life, thus demonstrating excellent outcomes.

Anterior Talo-Fibular Ligament Reconstruction With InternalBrace™ for Chronic Lateral Ankle Instability in Pediatric Patients.

INTRODUCTION: Ankle injuries and instability in a pediatric age group are common problems and often underreported. The injuries can range from a relatively benign ankle sprain to pain-limiting ankle instability that can inhibit the child from participating in sporting activities. However, conservative management and physiotherapy are the mainstay of treatment; a small group of patients present with persistent instability and benefit from surgical intervention in lateral ligament reconstruction. Our study looked at pediatric patients who had instability following failed conservative management. METHODS: Retrospective analysis of 14 patients with Chronic lateral Ankle instability (CLAI) who underwent Modified Brostrom-Gould repair( MBG) with or without Internal brace augmentation between January 2015 and October 2020. Patients were evaluated for the visual analogue scale (VAS), Manchester-oxford foot questionnaire (MOxFQ), subjective satisfaction, and return to preinjury activity level. RESULTS: Pain score improved from 8 (average 5-9) to 1 (average 0-3) following surgery. Functional assessment was made by assessing the Manchester Oxford questionnaire pre-and postoperatively. MOxFQ scores improved from 64 (8 SD) to 7 (15 SD). Thirteen of fourteen patients returned to normal sporting activities at the final follow-up. CONCLUSION: Modified Brostrom-Gould with InternalBrace™ augmentation is an excellent procedure for chronic lateral ligament injuries in the Paediatric population. It can be safely performed if we respect the anatomy and the physeal growth plate. It allows faster rehabilitation and return to preinjury activity level.

Increasing the uptake in a general practice prostate cancer screening programme.

BACKGROUND: Prostate cancer (PC) is the second most common cause of cancer deaths among males worldwide. Prostate-specific antigen (PSA) is a predictive indicator of prostate pathology. Men with elevated PSA levels are at increased risk of developing PC. There is currently no UK national PC screening programme, therefore patients often present to general practices (GPs) at later stages of pathology, worsening patient prognosis and outcomes. LOCAL PROBLEM: The location of the GP surgery had a large patient population at increased risk of PC, namely Afro-Caribbean/Asian males. METHODS: We conducted baseline measurements to identify male patients over the age of 65 and/or male patients who were at high risk of developing PC. These included previous referred patients or patients with a PSA over 10.0. We then implemented three plan-do-study-act (PDSA) cycles and measured their effect after 2 weeks of starting the respective intervention. INTERVENTIONS: PDSA1: Generating a list of target patients who have not had repeat/follow-up/referral and directly contacting by telephone to invite them for a blood test.PDSA2: Creating patient-specific electronic pop-up reminders on the electronic-patient-record system for PSA follow-up/referral/repeat test.Planned PDSA3: Patient education of prostate health and general self-checking, as well as benefits/risks of undergoing PSA screening in the form of patient focus groups and informative leaflets. RESULTS: We identified 220 male patients over 65 registered at a large South London GP surgery. 77.7% of eligible patients had a PSA measurement since 1 April 2019. Our results showed an overall increase in screening of 13.5% from baseline. CONCLUSIONS: Our project identified patients that may potentially have undiagnosed prostate pathology. However, a key factor for not reaching our goal was blood test refusal. This was further exacerbated by the COVID-19 pandemic, impacting the capacity to disseminate appropriate information to the local population on the importance of PSA screening.

Assessing biocompatibility & mechanical testing of 3D-printed PEEK versus milled PEEK.

Objectives: To compare mechanical properties of 3D-printed and milled poly-ether-ether-ketone (PEEK) materials. To define post-production treatments to enhance biocompatibility of 3D-printed PEEK. Methods: Standardised PEEK samples were produced via milling and fused-deposition-modelling 3D-printing. To evaluate mechanical properties, tensile strength, maximum flexural strength, fracture toughness, and micro-hardness were measured.3D printed samples were sandblasted with 50 or 125 µm aluminium oxide beads to increase biocompatibility.Scanning electron microscopy (SEM) evaluated microstructure of 3D-printed and sandblasted samples, estimating surface roughness at scales from 1mm-1µm.Cell adhesion on 3D printed and sandblasted materials was evaluated by culturing primary human endothelial cells and osteoblasts (HUVEC, HOBS) and evaluating cell growth over 48 h. Results: 3D printed materials had lower tensile strength, flexural strength, and fracture toughness, but higher micro-hardness.SEM analysis of 3D-printed surfaces showed sandblasting with 125 and 50 µm silica particles removed printing defects and created roughened surfaces for increased HUVEC and HOBs uniform cell adhesion and distribution. No cytotoxicity was observed over a 48h period, and all cells demonstrated >95% viability. Clinical significance: 3D-printing of PEEK is an emerging technology with clear advantages over milling in maxillofacial implant production. Nonetheless, this manufacturing modality may produce 3D printed PEEK devices with lower mechanical resistance parameters compared to milled PEEK but with values compatible with natural bone. PEEK has poor osteoconductivity and ability to osseointegrate. Sandblasting is an inexpensive modality to remove irregular surface defects and create uniform micro-rough surfaces supporting cell attachment and potentially enhancing integration of PEEK implants with host tissue.

Pilot study: undergraduate sports & exercise medicine conferences: what role do they play?

OBJECTIVES: Sports & exercise medicine (SEM) is a specialty encompassing the management of medical problems and injuries related to physical activity through means such as exercise advice and prescription. The field of SEM has been recognised in the UK since 2005 yet there is inadequate exposure of SEM in medical curricula. Conferences may be a way to increase exposure where students meet SEM professionals, gaining greater understanding of SEM career pathways. We therefore carried out a pilot study to assess this. METHODS: The King's College London Sports & Exercise Medicine Society organised a student-led conference consisting of six lectures. Seventy-five delegates were given questionnaires on their views on SEM before and after the conference, assessed using the 5-point Likert scale. Results were analysed using a Wilcoxon-Signed Rank statistical test. RESULTS: Questionnaire feedback showed 67.4% of delegates (n=46) had received SEM related teaching in their current degree. Results of our statistical analysis showed an increase in SEM career interest (p=0.0359), an increase in understanding of what a career in SEM involves (p=0.0009) and an increase in delegate's understanding of what is required to pursue a career in SEM (p=0.0004) after our conference. CONCLUSION: The study showed issues regarding poor exposure to SEM in medical curricula and highlighted the value of student conferences. Students felt they learnt more about the roles within the SEM specialty, aiding future career progression. Thus, we suggest that student-led conferences are a good platform to bridge this gap while medical schools introduce more SEM into their curricula.