RESUMEN
Touch screens are widely used in smartphones and tablets. These screens exhibit a pattern of directional, regular lines on their surface. The intricate texture of this background, which quickly causes interference, poses a significant challenge in detecting surface defects. Surface defects can be mainly classified into two types: linear and planar. Existing methods cannot effectively detect both types of defects. This study proposes a curvelet transform-based multi-angle filtering method. It can effectively attenuate regular patterns from panel images with textural backgrounds and preserve fine linear and planar defects in the reconstructed image. Curvelet transform is a multi-scale directional transformation that can capture the curved edges of objects well. The filtered curvelet coefficients are then reconstructed into the spatial domain and binarized using a threshold based on the interval estimation skill. The results of the trial show that the suggested approach can precisely locate and identify defects in touch panels. The rate of defect detection (1-ß) stands at 93.33 %. The rate of defect misjudgment (α) is at a low of 1.26 %. The correct classification rate (CR) is impressively high at 98.69 %, indicating that the proposed method provides fine-grained segmentation results over existing methods for detecting surface defects on touch panels.
RESUMEN
The integrity of product assembly in the precision assembly industry significantly influences the quality of the final products. During the assembly process, products may acquire assembly defects due to personnel oversight. A severe assembly defect could impair the product's normal function and potentially cause loss of life or property for the user. For workpiece defect inspection, there is limited discussion on the simultaneous detection of the primary kinds of assembly anomaly (missing parts, misplaced parts, foreign objects, and extra parts). However, these assembly anomalies account for most customer complaints in the traditional hand tool industry. This is because no equipment can comprehensively inspect major assembly defects, and inspections rely solely on professionals using simple tools and their own experience. Thus, this study proposes an automated visual inspection system to achieve defect inspection in hand tool assembly. This study samples the work-in-process from three assembly stations in the ratchet wrench assembly process; an investigation of 28 common assembly defect types is presented, covering the 4 kinds of assembly anomaly in the assembly operation; also, this study captures sample images of various assembly defects for the experiments. First, the captured images are filtered to eliminate surface reflection noise from the workpiece; then, a circular mask is given at the assembly position to extract the ROI area; next, the filtered ROI images are used to create a defect-type label set using manual annotation; after this, the R-CNN series network models are applied to object feature extraction and classification; finally, they are compared with other object detection models to identify which inspection model has the better performance. The experimental results show that, if each station uses the best model for defect inspection, it can effectively detect and classify defects. The average defect detection rate (1-ß) of each station is 92.64%, the average misjudgment rate (α) is 6.68%, and the average correct classification rate (CR) is 88.03%.
RESUMEN
Multifocal glasses are a new type of lens that can fit both nearsighted and farsighted vision on the same lens. This property allows the glass to have various curvatures in distinct regions within the glass during the grinding process. However, when the curvature varies irregularly, the glass is prone to optical deformation during imaging. Most of the previous studies on imaging deformation focus on the deformation correction of optical lenses. Consequently, this research uses an automatic deformation defect detection system for multifocal glasses to replace professional assessors. To quantify the grade of deformation of curved multifocal glasses, we first digitally imaged a pattern of concentric circles through a test glass to generate an imaged image of the glass. Second, we preprocess the image to enhance the clarity of the concentric circles' appearance. A centroid-radius model is used to represent the form variation properties of every circle in the processed image. Third, the deviation of the centroid radius for detecting deformation defects is found by a slight deviation control scheme, and we gain a difference image indicating the detected deformed regions after comparing it with the norm pattern. Fourth, based on the deformation measure and occurrence location of multifocal glasses, we build fuzzy membership functions and inference regulations to quantify the deformation's severity. Finally, a mixed model incorporating a network-based fuzzy inference and a genetic algorithm is applied to determine a quality grade for the deformation severity of detected defects. Testing outcomes show that the proposed methods attain a 94% accuracy rate of the quality levels for deformation severity, an 81% recall rate of deformation defects, and an 11% false positive rate for multifocal glass detection. This research contributes solutions to the problems of imaging deformation inspection and provides computer-aided systems for determining quality levels that meet the demands of inspection and quality control.
RESUMEN
Capacitive touch panels (CTPs) have the merits of being waterproof, antifouling, scratch resistant, and capable of rapid response, making them more popular in various touch electronic products. However, the CTP has a multilayer structure, and the background is a directional texture. The inspection work is more difficult when the defect area is small and occurs in the textured background. This study focused mainly on the automated defect inspection of CTPs with structural texture on the surface, using the spectral attributes of the discrete cosine transform (DCT) with the proposed three-way double-band Gaussian filtering (3W-DBGF) method. With consideration to the bandwidth and angle of the high-energy region combined with the characteristics of band filtering, threshold filtering, and Gaussian distribution filtering, the frequency values with higher energy are removed, and after reversal to the spatial space, the textured background can be weakened and the defects enhanced. Finally, we use simple statistics to set binarization threshold limits that can accurately separate defects from the background. The detection outcomes showed that the flaw detection rate of the DCT-based 3W-DBGF approach was 94.21%, the false-positive rate of the normal area was 1.97%, and the correct classification rate was 98.04%.
RESUMEN
In real supply chain environments, the discontinuous multidelivery policy is often used when finished products need to be transported to retailers or customers outside the production units. To address this real-life production-shipment situation, this study extends recent work using an economic production quantity- (EPQ-) based inventory model with a continuous inventory issuing policy, defective items, and machine breakdown by incorporating a multiple delivery policy into the model to replace the continuous policy and investigates the effect on the optimal run time decision for this specific EPQ model. Next, we further expand the scope of the problem to combine the retailer's stock holding cost into our study. This enhanced EPQ-based model can be used to reflect the situation found in contemporary manufacturing firms in which finished products are delivered to the producer's own retail stores and stocked there for sale. A second model is developed and studied. With the help of mathematical modeling and optimization techniques, the optimal run times that minimize the expected total system costs comprising costs incurred in production units, transportation, and retail stores are derived, for both models. Numerical examples are provided to demonstrate the applicability of our research results.