Severe myocardial bridge presenting as paroxysmal atrioventricular block.

Chest pain complicated with electrocardiographic changes is not an uncommon scenario in emergency departments, which should be examined cautiously. We describe a 51-years-old man with a myocardial bridge of coronary artery presenting with simultaneous Mobitz type I atrioventricular block on electrocardiography. Echocardiography excluded valvular abnormality and systolic/diastolic dysfunction. Coronary angiography confirmed the diagnosis of a myocardial bridge at the middle segment of the left anterior descending artery, involving the most dominant septal perforator branch with marked systolic compression. The patient underwent coronary artery bypass grafting surgery and was followed up uneventfully at the outpatient department with medical treatment of diltiazem and clopidogrel. The present case is being reported to highlight that clinicians should be alert to such a congenital abnormality as a potential cause of repeated myocardial infarction and conduction abnormality.

Brain death in children: a retrospective review of patients at a paediatric intensive care unit.

PURPOSE: Among patients in paediatric intensive care units (PICUs), death is sometimes inevitable despite advances in treatment. Some PICU patients may have irreversible cessation of all brain function, which is considered as brain death (BD). This study investigated demographic and clinical differences between PICU patients with BD and those with cardiopulmonary death. METHODS: All children who died in the PICU at a university-affiliated trauma centre between October 2002 and October 2018 were included in this retrospective study. Demographics and clinical characteristics were compared between patients with BD and patients with cardiopulmonary death. RESULTS: Of the 2784 patients admitted to the PICU during the study period, 127 died (4.6%). Of these 127 deaths, 22 (17.3%) were BD and 105 were cardiopulmonary death. Length of PICU stay was shorter for patients with cardiopulmonary death than for patients with BD (2 vs 8.5 days, P=0.0042). The most common mechanisms of injury in patients with BD were hypoxic-ischaemic injury (40.9%), central nervous system infection (18.2%), and traumatic brain injury (13.6%). The combined proportion of accident and trauma-related injury was greater in patients with BD than in patients with cardiopulmonary death (27.3% vs 3.8%, P<0.001). Organ donation was approved by the families of four of the 22 patients with BD (18.2%) and was performed successfully in three of these four patients. CONCLUSIONS: These findings emphasise the importance of injury prevention in childhood, as well as the need for education of the public regarding acceptance of BD and support for organ donation.

Creating virtual 3-dimensional models for teaching pre-clinical tooth preparation: Students' usages and perceptions.

PURPOSE: This research aimed to evaluate the students' usage and perceptions of using smartphones in their general dental education and learning tooth preparation with the individually designed virtual 3D instructional models in the pre-clinical removable partial denture course. MATERIALS AND METHODS: Second-year dental students were asked to voluntarily participate in a survey to investigate their demographic information, general usages of smartphones, perception of smartphones usage in dental education (construct 1) and perception of individually designed virtual 3D instructional models (construct 2). Students' responses of general usages of the smartphones were compared with their demographic and educational backgrounds using nonparametric Kruskal-Wallis test (for age) and Fisher's exact test (for sex, race and educational background). The sums of scores of the construct 1 and construct 2 were tested for associations with student's demographic and educational backgrounds using the Pearson product-moment correlation (for age), t test (for sex and educational background) or one-way ANOVA F test (for race) (α = .05). RESULTS: A 75% response rate (N = 90) was achieved in this study, and all 90 participants owned smartphones. Students' responses to general usages of the smartphones were not significantly influenced by their demographic background. For the construct 1, more than 73% of participants responded either agree or strongly agree to the usage of smartphones in general dental education and pre-clinical setting; however, only 49% of participants responded the same way in the clinical setting. For the construct 2, 48 of 90 participants viewed the 3D models, and more than 73% of these 48 participants responded either agree or strongly agree to the usage of the 3D models in the pre-clinical course. Student's demographic background did not have significant influence on the sums of scores of the construct 1 and construct 2. CONCLUSIONS: Within the limitations of this study, high usages and ownerships of smartphones were found amongst the students surveyed. The individually designed virtual 3D instructional models as supplemental teaching materials in the pre-clinical course were perceived positively by the students.

Quantification of fat infiltration in the sacroiliac joints with ankylosing spondylitis using IDEAL sequence.

AIM: To quantitatively assess fat infiltration in the sacroiliac joints (SIJs) of patients with ankylosing spondylitis (AS) by measuring the fat/water signal ratios of periarticular bone marrow with iterative decomposition of water and fat with echo asymmetry and least square estimation (IDEAL). MATERIALS AND METHODS: Routine SIJ magnetic resonance imaging (MRI) and IDEAL were performed on 40 patients with AS and 30 healthy subjects. The fat infiltration regions (FIRs) and normal-appearing regions (NARs) of patients were measured based on the fat/water signal intensity on IDEAL. RESULTS: AS patients had higher fat/water signal ratios on FIRs and NARs (65.4-85.4%, p<0.05, and 44.1-70.7%, p<0.05, respectively) compared to healthy controls (38.3-43.3%). After treatment, the fat/water signal ratios of FIRs and NARs decreased (42.1-53.7% and 41.5-50.3%, respectively), but they remained higher than in the healthy controls (p<0.05). The fat infiltration was detected more effectively with a fat fraction map of the IDEAL sequence (95%) than other sequences, including the T1-weighted sequence (65%), and the fat/water signal ratios of the sacrum and ilium between the left and right sides of SIJs were approximately the same. CONCLUSION: The findings of this study suggest that IDEAL may be useful as a quantitative and objective method for evaluating the fat infiltration in the periarticular bone marrow of SIJs with AS; additionally, the sensitivity of IDEAL is better than that of routine sequences in detecting micro-fat infiltration of SIJs, and IDEAL can be used to quantitatively measure the adipose content and monitor patient follow-up after AS treatment.

Comparison of digital scanning and polyvinyl siloxane impression techniques by dental students: instructional efficiency and attitudes towards technology.

INTRODUCTION: With increasing use of digital scanning with restorative procedures in the dental office, it becomes necessary that educational institutions adopt instructional methodology for introducing this technology together with conventional impression techniques. OBJECTIVE: To compare the time differences between instructing dental students on digital scanning (DS) (LAVA C.O.S. digital impression system) and a conventional impression technique (CI) (polyvinyl siloxane), and to compare students' attitudes and beliefs towards both techniques. MATERIALS AND METHODS: Volunteer sophomore dental students (n = 25) with no prior experience in clinical impressions were recruited and IRB consent obtained. Participants responded to a pre-and post-exposure questionnaire. Participants were instructed on the use of both DS and CI for a single tooth full coverage crown restoration using a consecutive sequence of video lecture, investigator-led demonstration and independent impression exercise. The time necessary for each step (minutes) was recorded. Statistical significance was calculated using dependent t-tests (time measurements) and 2-sample Mann-Whitney (questionnaire responses). RESULTS: The time spent teaching students was greater for DS than CI for video lecture (15.95 and 10.07 min, P = 0.0000), demonstration time (9.06 and 4.70 min, P = 0.0000) and impression time (18.17 and 8.59 min, P = 0.0000). Prior to the instruction and practice, students considered themselves more familiar with CI (3.96) than DS (1.96) (P = 0.0000). After the instruction and practice, participants reported CI technique proved significantly easier than expected (pre-instruction: 3.52 and post-instruction: 4.08, P = 0.002). However, overall participants' perception of ease of use for DS was not influenced by this instruction and practice experience (pre-instruction: 3.84 and post-instruction: 3.56, P = 0.106). Despite the results, 96% of participants expressed an expectation that DS will become their predominant impression technique during their careers. CONCLUSIONS: Dental students with no clinical experience have high expectations for digital scanning, and despite their initial difficulty, expect it to become their primary impression technique during their professional futures. The instructional time necessary for introducing DS into the curriculum is significantly greater than CI in both classroom (lecture) and clinical simulation settings (investigator-led demonstration).

Microleakage of Lithium Disilicate Crown Margins Finished on Direct Restorative Materials.

OBJECTIVE: For some esthetic clinical situations, it is necessary to finish crown margins on direct restorative materials to preserve tissue integrity, bonding integrity, and biological width. The purpose of this research was to investigate microleakage at the interface between bonded lithium disilicate crowns and various direct restorative materials in a class III and class V position. METHODS AND MATERIALS: Class III or class V restorations were prepared on one side of extracted incisors with either Tetric EvoCeram, Tetric Evoceram Bulk, Fuji II LC, or Tetric Evoflow. The teeth were prepared for and received a lithium disilicate crown. After load fatiguing, the specimens were thermo-cycled with a fuchsin dye and sectioned. The depth and area of dye penetration were measured with a dimensional grid in micrometers using stereomicroscopy and reported as mean dye depth and area (µm) ± SD. The comparison of multiple categorical independent variables with ratio scale dependent variables was evaluated with an analysis of variance and Tukey's post hoc analysis. RESULTS: A statistically significant higher dye penetration was noted for all treatment groups compared with the positive control (side opposite the restoration after sagittal sectioning was used as positive control) regardless of material or placement area (p<0.05). In comparing treatment groups, the Tetric EvoFlow experienced a statistically higher dye penetration than did the other treatment groups regardless of material or placement area (p<0.05). There was no statistically significant difference between the Tetric EvoCeram, Tetric Evoceram Bulk, and Fuji II LC materials regardless of placement area (p>0.05). CONCLUSIONS: Within the limitations of this study, it can be concluded that flowable composite materials as finish lines that interact with resin cements could lead to exacerbated interfacial degradation. Finishing lithium disilicate all-ceramic crowns on flowable resin composite materials in the esthetic zone should be used with caution. If necessary, finishing lithium disilicate all-ceramic crowns on nanofilled resin composite or resin-modified glass ionomer materials seems to provide the least dye penetration depth and area.

High temperature oxidation of iron-iron oxide core-shell nanowires composed of iron nanoparticles.

This work describes an oxidation process of iron-iron oxide core-shell nanowires at temperatures between 100 °C and 800 °C. The studied nanomaterial was synthesized through a simple chemical reduction of iron trichloride in an external magnetic field under a constant flow of argon. The electron microscopy investigations allowed determining that the as-prepared nanowires were composed of self-assembled iron nanoparticles which were covered by a 3 nm thick oxide shell and separated from each other by a thin interface layer. Both these layers exhibited an amorphous or highly-disordered character which was traced by means of transmission electron microscopy and Mössbauer spectroscopy. The thermal oxidation was carried out under a constant flow of argon which contained the traces of oxygen. The first stage of process was related to slow transformations of amorphous Fe and amorphous iron oxides into crystalline phases and disappearance of interfaces between iron nanoparticles forming the studied nanomaterial (range: 25-300 °C). After that, the crystalline iron core and iron oxide shell became oxidized and signals for different compositions of iron oxide sheath were observed (range: 300-800 °C) using X-ray diffraction, Raman spectroscopy and Mössbauer spectroscopy. According to the thermal gravimetric analysis, the nanowires heated up to 800 °C under argon atmosphere gained 37% of mass with respect to their initial weight. The structure of the studied nanomaterial oxidized at 800 °C was mainly composed of α-Fe2O3 (∼ 93%). Moreover, iron nanowires treated above 600 °C lost their wire-like shape due to their shrinkage and collapse caused by the void coalescence.

Establishment of a prediction model for the miRNA-based heading date characteristics of rice in the booting stage.

Rice (Oryza sativa L.) is one of the most important food crops in the world. In Taiwan, due to the warm climate, there are two harvests annually. However, the yield and quality of rice can vary between each crop season in any given year. Previous reports have shown that microRNAs (miRNAs) play a crucial role in many developmental and physiological processes in plants. In this study, the heading date characteristics of 167 rice cultivars from the second crop season were recorded, and 27 rice cultivars were selected for preliminary microarray analysis. A total of 14 miRNAs from different heading date characteristics in 21 cultivars were selected based on significant differences in their expression profiles. Using a correlation analysis between the heading date and selected miRNA expression obtained from real-time polymerase chain reaction (PCR) assays, we developed a heading date prediction model. The model includes nine miRNA genes with corresponding R2 values of 0.8. To confirm the model, a real-time PCR analysis was performed on an additional 27 rice cultivars and we found the model predicted the heading date with accuracy. Therefore, the developed prediction may be useful in further studies aimed at confirming the reliability of the use of miRNA in molecular breeding and to increase the selection efficiency of rice cultivars and breeding.

Digital workflow for virtually designing and milling ceramic lithium disilicate veneers: a clinical report.

Laminate veneers have been routinely used to restore and enhance the appearance of natural dentition. The traditional pathway for fabricating veneers consisted of making conventional polyvinyl siloxane impressions, producing stone casts, and fabricating final porcelain prostheses on stone dies. Pressed ceramics have successfully been used for laminate veneer fabrication for several years. Recently, digital computer-aided design/computer-aided manufacturing scanning has become commercially available to make a digital impression that is sent electronically to a dental laboratory or a chairside milling machine. However, technology has been developed to allow digital data acquisition in conjunction with electronically transmitted data that enables virtual design of restorations and milling at a remote production center. Following the aforementioned workflow will provide the opportunity to fabricate a physical cast-free restoration. This new technique has been reported recently for all-ceramic IPS e.max full-coverage pressed-ceramic restorations. However, laminate veneers are very delicate and technique-sensitive restorations when compared with all-ceramic full-coverage ones made from the same material. Complete digital design and fabrication of multiple consecutive laminate veneers seems to be very challenging. This clinical report presents the digital workflow for the virtual design and fabrication of multiple laminate veneers in a patient for enhancing the esthetics of his maxillary anterior teeth. A step-by-step process is presented with a discussion of the advantages and disadvantages of this novel technique. Additionally, the use of lithium disilicate ceramic as the material of choice and the rationale for such a decision is discussed.

Predictable Restorative Work Flow for Computer-Aided Design/Computer-Aided Manufacture-Fabricated Ceramic Veneers Utilizing a Virtual Smile Design Principle.

The purpose of this case report was to present the use of a contemporary digital photograph-assisted virtual smile design principle, an intraoral digital impression, and computer-aided design/computer-aided manufacture-fabricated lithium disilicate ceramic veneers to treat a patient with esthetic needs in the maxillary anterior region. By using the proposed digital restorative work flow, this case report demonstrated an effective communication pathway between the patient, clinician, and dental laboratory technician. Effective communication can help to achieve a more predictable and satisfactory esthetic outcome.

Dental student perception and assessment of their clinical knowledge in educating patients about preventive dentistry.

In today's dental school curricula, an increasing amount of time is dedicated to technological advances, and preventive dentistry topics may not be adequately addressed. Freshman (D1) students participated in a new Introduction to Preventive Dentistry course, which consisted of didactic lectures, active learning breakout sessions and case-based studies. The goal of this study was to determine if D1 dental students completing the course had a better knowledge and comfort level with basic preventive dentistry concepts and caries risk assessment than the upcoming graduating senior dental students. Following the completion of the course, D1 students were administered a survey that assessed their comfort level describing preventive dentistry topics to patients. This was immediately followed by an unannounced examination over the same topics. Senior (D4) students, who had not taken a formal course, reported statistically significant higher comfort levels than D1 students. However, the D4s scored significantly lower in all of the examination areas than the D1 students. Higher scores in D1s may have been due to recent exposure to the course material. However, the basic nature of the content-specific questions should be easily answered by novice practitioners educating their patients on oral disease prevention. As the current data shows lower content-specific scores of basic preventive dentistry knowledge amongst graduating D4 students, this may indicate a need for more guidance and education of students during the patient care. This study showed that implementation of a formalised course for D1 students can successfully ameliorate deficiencies in knowledge of preventive dentistry topics.

ß-Phase poly(vinylidene fluoride) films encouraged more homogeneous cell distribution and more significant deposition of fibronectin towards the cell-material interface compared to α-phase poly(vinylidene fluoride) films.

The piezoelectric response from ß-phase poly(vinylidene fluoride) (PVDF) can potentially be exploited for biomedical application. We hypothesized that α and ß-phase PVDF exert direct but different influence on cellular behavior. α- and ß-phase PVDF films were synthesized through solution casting and characterized with FT-IR, XRD, AFM and PFM to ensure successful fabrication of α and ß-phase PVDF films. Cellular evaluation with L929 mouse fibroblasts over one-week was conducted with AlamarBlue® metabolic assay and PicoGreen® proliferation assay. Immunostaining of fibronectin investigated the extent and distribution of extracellular matrix deposition. Image saliency analysis quantified differences in cellular distribution on the PVDF films. Our results showed that ß-phase PVDF films with the largest area expressing piezoelectric effect elicited highest cell metabolic activity at day 3 of culture. Increased fibronectin adsorption towards the cell-material interface was shown on ß-phase PVDF films. Image saliency analysis showed that fibroblasts on ß-phase PVDF films were more homogeneously distributed than on α-phase PVDF films. Taken collectively, the different molecular packing of α and ß-phase PVDF resulted in differing physical properties of films, which in turn induced differences in cellular behaviors. Further analysis of how α and ß-phase PVDF may evoke specific cellular behavior to suit particular application will be intriguing.

The HLA-B gene and Hashimoto disease in Han Chinese children: a case-control and family-based study.

Hashimoto disease (HD) is an autoimmune thyroid disease resulting from complex interactions between genetic and environmental factors. The human leukocyte antigen (HLA) gene has been established to be involved in the susceptibility to HD. We aim to investigate the associations between HLA-B alleles and Han Chinese children with HD by both case-control and family-based studies. A total of 108 unrelated children with HD, 380 unrelated healthy controls, 58 trios of affected patients and their parents, and 75 trios of unaffected siblings and their parents were recruited. HLA-B genotyping was performed by polymerase chain reaction and detected with a sequence-specific oligonucleotide probes system. We found that B*46:01 allele (OR = 2.31, 95% CI 1.60-3.34, P(c) = 9.99 × 10(-5)) and carrier (OR = 3.28, 95% CI 2.10-5.11, P(c) = 1.35 × 10(-6)) were associated with HD risk. Transmission/disequilibrium test further confirmed an overtransmission of the B*46:01 (OR 2.55, 95% CI 1.36-6.10, P = 6.5 × 10(-3)). The findings were similar in females when stratified by gender. In conclusion, our results clearly identify that HLA-B*46:01 confers susceptibility to HD in Han Chinese children. Further studies with larger children cohort are required to confirm the role of B*46:01 in the development of HD.

High-dose versus low-dose esomeprazole-based triple therapy for Helicobacter pylori infection.

BACKGROUND: This prospective, randomized, controlled study was conducted to compare the efficacies of high-dose and low-dose esomeprazole-based triple therapies for Helicobacter pylori eradication in Taiwan. MATERIALS AND METHODS: From January 2004 to June 2006, 240 H. pylori-infected patients were randomly assigned to undergo high-dose (40 mg b.d.) or low-dose (40 mg o.d.) esomeprazole combined with clarithromycin (500 mg b.d.) and amoxicillin (1 g b.d.) for one week. Follow-up endoscopy was performed at eight weeks after the end of treatment to evaluate the response to therapy. RESULTS: Intention-to-treat analysis demonstrated no differences between eradication rates of high-dose and low-dose groups (92% vs. 90%, respectively, P > 0.05). Per-protocol analysis yielded comparable results (95% vs. 93%). Both groups exhibited similar frequencies of adverse events (13% vs. 11%) and drug compliance (96% vs. 93%). Multivariate analysis indicated that only good compliance (odds ratio: 10.3, 95% CI, 3.0-35.7) was an independent predictor of treatment success. CONCLUSIONS: This work demonstrates that low-dose esomeprazole-based triple therapy yields a similar eradication rate as high-dose esomeprazole-based therapy in Taiwan. Since the cost of the low-dose regime is lower than that of the high-dose regime, low-dose esomeprazole-based triple therapy can reasonably be recommended for the first-line eradication of H. pylori for Taiwanese and probably most Asians.

A simplified model to predict the thermal response of PLG and its influence on BLEVE.

A simplified model has been developed to describe the thermal response of pressure liquefied gas (PLG) tanks subjected to fire. The development of the stratification layer is considered in this model. Comparison of results with available experimental data shows that our proposed model can reasonably predict the thermal response. The effect of stratification on the liquid energy is also summarized. Results show that the pressure in the tank rises faster as a result of thermal stratification, and for the same tank pressure the energy in the liquid is less when the liquid is stratified. Stratification can reduce the severity of hazards of boiling liquid expanding vapor explosion (BLEVE).

A new synnematous species of Penicillium from soil in Taiwan.

A synnematous species of Penicillium, P. calidicanium, is described and illustrated. The fungus was isolated from soil in Taiwan. Penicillium calidicanium can be placed in subgenus Biverticillium because of its symmetrical, biverticillate penicilli, ampulliform to acerose phialides, and ability to produce abundant synnemata in Czapek yeast extract agar, malt extract agar, and Czapek's solution agar. It is close to P. duclauxii and P. vulpinum, but differs in colony morphology, growth rate, morphology of the synnemata, and ornamentation of the conidial wall.

Effects of cavotricuspid isthmus ablation on atrioventricular node electrophysiology in patients with typical atrial flutter.

BACKGROUND: The atrial musculature in the cavotricuspid isthmus is a part of posterior inputs to the AV node. In patients with typical atrial flutter, effects of radiofrequency ablation of this isthmus on AV node conduction are still unknown. METHODS AND RESULTS: This study included 16 patients with clinically documented typical atrial flutter. Group 1 had 8 patients without and group 2 had 8 patients with dual AV nodal pathway physiology. Electrical pacing from the interatrial septum and low right atrium was performed to evaluate antegrade AV node function before and after ablation of the cavotricuspid isthmus. In group 1, the AV node conduction properties were similar before and after ablation. In group 2, the AV node Wenckebach cycle length and maximal AH interval during low right atrium (356+/-58 versus 399+/-49 ms, P=0.008; 303+/-57 versus 376+/-50 ms, P=0.008) and interatrial septum (365+/-62 versus 393+/-59 ms, P=0.008; 324+/-52 versus 390+/-60 ms, P=0.008) pacing were significantly longer after ablation. Elimination of the slow pathway after ablation was noted in 2 patients, including 1 with AV nodal reentrant echo beats. CONCLUSIONS: Radiofrequency ablation of the cavotricuspid isthmus was effective in eliminating typical atrial flutter without injury of antegrade fast AV node conduction. The atrial musculature in the cavotricuspid isthmus significantly contributed to the slow AV node conduction.

Acquired pulmonary vein stenosis after radiofrequency catheter ablation of paroxysmal atrial fibrillation.

INTRODUCTION: Elimination of the initiating focus within the pulmonary vein (PV) using radiofrequency (RF) catheter ablation is a new treatment modality for treatment of drug-refractory atrial fibrillation. However, information on the long-term safety of RF ablation within the PV is limited. METHODS AND RESULTS: In 102 patients with drug-refractory atrial fibrillation and at least one initiating focus from the PV, series transesophageal echocardiography was performed to monitor the effect of RF ablation on the PV. There were 66 foci in the right upper PV and 65 foci in the left upper PV. Within 3 days of ablation, 26 of the ablated right upper PVs (39%) had increased peak Doppler flow velocity (mean 130+/-28 cm/sec, range 106 to 220), and 15 of the ablated left upper PVs (23%) had increased peak Doppler flow velocity (mean 140+/-39 cm/sec, range 105 to 219). Seven patients had increased peak Doppler flow velocity in both upper PVs. No factor (including age, sex, site of ablation, number of RF pulses, pulse duration, and temperature) could predict PV stenosis after RF ablation. Three patients with stenosis of both upper PVs experienced mild dyspnea on exertion, but only one had mild increase of pulmonary pressure. There was no significant change of peak and mean flow velocity and of PV diameter in sequential follow-up studies up to 16 (209+/-94 days) months. CONCLUSION: Focal PV stenosis is observed frequently after RF catheter ablation applied within the vein, but usually is without clinical significance. However, ablation within multiple PVs might cause pulmonary hypertension and should be considered a limiting factor in this procedure.

Pulmonary vein dilation in patients with atrial fibrillation: detection by magnetic resonance imaging.

INTRODUCTION: The positive relationship between left atrial (LA) size and atrial fibrillation (AF) is well recognized; however, there is little information on the association of pulmonary vein (PV) diameter and AF. The purpose of this study was to investigate by magnetic resonance angiography the change of PV and LA size in patients with no history of AF, patients with paroxysmal AF (PAF), and patients with chronic AF (CAF). METHODS AND RESULTS: The study included 47 patients. Group I included 15 patients with normal sinus rhythm and no history of documented AF. Group II included 24 patients with drug-refractory PAF who underwent electrophysiologic study and radiofrequency ablation of PV foci. Group III included 8 patients with CAF who were converted to sinus rhythm by external electrical cardioversion. Age and concomitant heart diseases were similar among the three groups. We measured the diameter of each PV at its junction with the LA in addition to LA dimensions by gadolinium-enhanced magnetic resonance angiography with three-dimensional reconstruction. Significant dilation of both superior PVs (P < 0.01) and transverse diameter of LA (P < 0.01) was seen in the three groups. There were no significant changes of both inferior PVs, corrected PV (PV/LA) diameter, or longitudinal diameter of LA among the three groups. Only 28% patients showed arrhythmogenic foci from the largest PV. CONCLUSION: Significant dilation of both superior PVs with simultaneous LA enlargement was demonstrated i