RESUMEN
Owing to their capability to produce reactive oxygen species (ROS) under solar irradiation, covalent organic frameworks (COFs) with pre-designable structure and unique architectures show great potentials for water purification. However, the sluggish charge separation, inefficient oxygen activation and poor structure stability in COFs restrict their practical applications to decontaminate water. Herein, via a facile one-pot synthetic strategy, we show the direct conversion of reversible imine linkage into rigid thiazole linkage can adjust the π-conjugation and local charge polarization of skeleton to boost the exciton dissociation on COFs. The rigid linkage can also improve the robustness of skeleton and the stability of COFs during the consecutive utilization process. More importantly, the thiazole linkage in COFs with optimal C 2p states (COF-S) effectively increases the activities of neighboring benzene unit to directly modulate the O2-adsorption energy barrier and improve the ROS production efficiency, resulting in the excellent photocatalytic degradation efficiency of seven toxic emerging contaminants (e.g. degrading ~99% of 5 mg L-1 paracetamol in only 7 min) and effective bacterial/algal inactivation performance. Besides, COF-S can be immobilized in continuous-flow reactor and in enlarged reactor to efficiently eliminate pollutants under natural sunlight irradiation, demonstrating the feasibility for practical application.
RESUMEN
Dynamic crystals with directional deformations in response to external stimuli through molecular reconfiguration, are observed predominantly in certain organic crystals and metal complexes. Low-dimensional hybrid halides, resemble these materials due to the presence of strong hydrogen bonds between bulky organic moieties and inorganic units, whereas their dynamic behavior remains largely unexplored. Here we show that a one-dimensional hybrid halide (MV)BiBr5 (MV = methylviologen) undergoes an isosymmetric phase transition at hydrostatic pressure of 0.20 GPa, accompanied by a remarkable length expansion of 20-30% and red to dark yellow color change. Unexpectedly, the backward transition can be fully reversed by mechanical stimulation rather than decompression. In the high-pressure phase, the coexistence of strong Bi3+ lone pair stereochemical activity and large reorientations of the planar MV2+ cations, together with the newly formed CH···Br hydrogen interactions, are the structural features that facilitate microscopic changes and stabilize the metastable high-pressure phase at ambient conditions.
RESUMEN
The propagation of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) induced by the release of antibiotics poses great threats to ecological safety and human health. In this study, periodate (PI)/FeS2/simulated sunlight (SSL) system was employed to remove representative ARB, ARGs and antibiotics in water. 1 × 107 CFU mL-1 of gentamycin-resistant Escherichia coli was effectively disinfected below limit of detection in PI/FeS2/SSL system under different water matrix and in real water samples. Sulfadiazine-resistant Pseudomonas and Gram-positive Bacillus subtilis could also be efficiently sterilized. Theoretical calculation showed that (110) facet was the most reactive facet on FeS2 to activate PI for the generation of reactive species (·OH, ·O2-, h+ and Fe(IV)=O) to damage cell membrane and intracellular enzyme defense system. Both intracellular and extracellular ARGs could be degraded and the expression levels of multidrug resistance-related genes were downregulated during the disinfection process. Thus, horizontal gene transfer (HGT) of ARB was inhibited. Moreover, PI/FeS2/SSL system could disinfect ARB in a continuous flow reactor and in an enlarged reactor under natural sunlight irradiation. PI/FeS2/SSL system could also effectively degrade the HGT-promoting antibiotic (ciprofloxacin) via hydroxylation and ring cleavage process. Overall, PI/FeS2/SSL exhibited great promise for the elimination of antibiotic resistance from water.
Asunto(s)
Antibacterianos , Ciprofloxacina , Farmacorresistencia Bacteriana , Compuestos Ferrosos , Ciprofloxacina/farmacología , Antibacterianos/farmacología , Antibacterianos/química , Compuestos Ferrosos/química , Compuestos Ferrosos/farmacología , Farmacorresistencia Bacteriana/genética , Luz Solar , Desinfección/métodos , Purificación del Agua/métodos , Escherichia coli/efectos de los fármacos , Escherichia coli/genética , Contaminantes Químicos del Agua , Microbiología del Agua , Bacterias/efectos de los fármacos , Bacterias/genética , Bacterias/metabolismo , Bacterias/efectos de la radiación , Transferencia de Gen HorizontalRESUMEN
Harmful algal blooms pose tremendous threats to ecological safety and human health. In this study, simulated solar light (SSL) irradiation was used to activate periodate (PI) for the inactivation of Microcystis aeruginosa and degradation of microcystin-LR (MC-LR). We found that PI-SSL system could effectively inactivate 5 × 106 cells·mL-1 algal cells below the limit of detection within 180 min. ·OH and iodine (IO3· and IO4·) radicals generated in PI-SSL system could rupture cell membranes, releasing intracellular substances including MC-LR into the reaction system. However, the released MC-LR could be degraded into non-toxic small molecules via hydroxylation and ring cleavage processes in PI-SSL system, reducing their environmental risks. High algae inactivation performance of PI-SSL system in solution with a wide pH range (3-9), with the coexisting anions (Cl-, NO3- and SO42-) and the copresence of natural organic matters (humic acid and fulvic acid), real water (lake water and river water), as well as in continuous-flow reactor (14 h) were also achieved. In addition, under natural sunlight irradiation, effective algae inactivation could also be achieved in an enlarged reactor (1 L). Overall, our study showed that PI-SSL system could avoid the inference by the background substances and could be employed as a feasible technique to treat algal bloom water.
Asunto(s)
Microcistinas , Microcystis , Luz Solar , Microcystis/metabolismo , Microcistinas/metabolismo , Toxinas Marinas , Floraciones de Algas NocivasRESUMEN
Very recently, a new superconductor with Tc = 80 K has been reported in nickelate (La3Ni2O7) at around 15-40 GPa conditions (Nature, 621, 493, 2023), which is the second type of unconventional superconductor, besides cuprates, with Tc above liquid nitrogen temperature. However, the phase diagram plotted in this report was mostly based on the transport measurement under low-temperature and high-pressure conditions, and the assumed corresponding X-ray diffraction (XRD) results were carried out at room temperature. This encouraged us to carry out in situ high-pressure and low-temperature synchrotron XRD experiments to determine which phase is responsible for the high Tc state. In addition to the phase transition from the orthorhombic Amam structure to the orthorhombic Fmmm structure, a tetragonal phase with the space group of I4/mmm was discovered when the sample was compressed to around 19 GPa at 40 K where the superconductivity takes place in La3Ni2O7. The calculations based on this tetragonal structure reveal that the electronic states that approached the Fermi energy were mainly dominated by the eg orbitals (3dz2 and 3dx2-y2) of Ni atoms, which are located in the oxygen octahedral crystal field. The correlation between Tc and this structural evolution, especially Ni-O octahedra regularity and the in-plane Ni-O-Ni bonding angles, is analyzed. This work sheds new light to identify what is the most likely phase responsible for superconductivity in double-layered nickelate.
RESUMEN
The framework material Eu[Ag(CN)2]3·3H2O exhibits a negative linear compressibility (NLC) of -4.2(1) TPa-1 over the largest pressure range yet observed (0-8.2 GPa). High-pressure single-crystal X-ray diffraction data show that the rapid contraction of the Kagome silver layers under compression causes the wine-rack lattice to expand along the c-axis. The hydrogen bonds between the water molecules and the main frameworks constrain the structural deformation under pressure and eventually a weak NLC effect generated. Furthermore, we found that the pressure-induced emission intensity increases almost 800-fold at 4.0 GPa, followed by a gradual decrease and disappearance at 8.1 GPa. Under compression, high pressure significantly tunes the triplet level positions near the Eu3+ ions, and horizontal displacement between a quenching excited state and the excited levels of Eu3+ facilitates the energy transfer process to the 5D0 excited state and limits the nonradiative corssover at elevated pressures, thus increasing the emission intensity. In addition, we observe a gradual band gap reduction with increasing pressure, and the sample could not be returned to the initial state after the pressure was completely released. By controlling the structural flexibility, we observe a coupled NLC and pressure-induced strong enhancement of the emission properties of Eu[Ag(CN)2]3·3H2O, which provides a new route for the design of new optical devices with intriguing luminescence properties under extreme environments.
RESUMEN
Adsorption-oxidation is a promising technique to decontaminate As(III) polluted water. In present study, ZrO2-modified covalent organic framework (ZrO2-COF) was fabricated and used to remove arsenic from water under visible light irradiation. The results showed that ZrO2-COF (0.2 g/L) could efficiently capture As(III) (5 mg/L) from water and then oxidize the adsorbed As(III) into less toxic As(V) under visible light irradiation (60 min), achieving the complete decontamination of As(III) polluted water. Based on characterization results and theoretical calculations, we found that in ZrO2-COF composite, ZrO2 served as sites for adsorption of As(III)/the latter transformed As(V), while COF worked as photocatalytic center for As(III) oxidation. Effective As(III) removal could also be achieved by ZrO2-COF under visible light irradiation in complex water chemistry conditions including wide solution pH range (3-11), broad solution ion strength range (1-100 mM), the copresence of natural organic matter (0.1-1 mg/L humic acid) and various coexisting ions in solutions, as well as in real water samples. In addition, we found that ZrO2-COF had excellent reuse performance in 4 consecutive cycles. Our results showed that under visible light irradiation, ZrO2-COF composites could be a promising technique for efficient As(III) removal from water.
RESUMEN
The insufficient exciton (e- -h+ pair) separation/transfer and sluggish two-electron water oxidation are two main factors limiting the H2 O2 photosynthetic efficiency of covalent organic frameworks (COFs) photocatalysts. Herein, we present an alternative strategy to simultaneously facilitate exciton separation/transfer and reduce the energy barrier of two-electron water oxidation in COFs via a dicyano functionalization. The in situ characterization and theoretical calculations reveal that the dicyano functionalization improves the amount of charge transfer channels between donor and acceptor units from two in COF-0CN without cyano functionalization to three in COF-1CN with mono-cyano functionalization and four in COF-2CN with dicyano functionalization, leading to the highest separation/transfer efficiency in COF-2CN. More importantly, the dicyano group activates the neighbouring C atom to produce the key *OH intermediate for effectively reducing the energy barrier of rate-determining two-electron water oxidation in H2 O2 photosynthesis. The simultaneously enhanced exciton separation/transfer and two-electron water oxidation in COF-2CN result in high H2 O2 yield (1601â µmol g-1 h-1 ) from water and oxygen without using sacrificial reagent under visible-light irradiation. COF-2CN can effectively yield H2 O2 in water with wide pH range, in different real water samples, in scaled-up reactor under natural sunlight irradiation, and in continuous-flow reactor for consecutively producing H2 O2 solution for water decontamination.
RESUMEN
Antibiotics present in the natural environment would induce the generation of antibiotic-resistant bacteria (ARB), causing great environmental risks. The effects of antibiotic resistance genes (ARGs) and antibiotics on bacterial transport/deposition in porous media yet are unclear. By using E. coli without ARGs as antibiotic-susceptible bacteria (ASB) and their corresponding isogenic mutants with ARGs in plasmids as ARB, the effects of ARGs and antibiotics on bacterial transport in porous media were examined under different conditions (1-4 m/d flow rates and 5-100 mM NaCl solutions). The transport behaviors of ARB were comparable with those of ASB under antibiotic-free conditions, indicating that ARGs present within cells had negligible influence on bacterial transport in antibiotic-free solutions. Interestingly, antibiotics (5-1000 µg/L gentamicin) present in solutions increased the transport of both ARB and ASB with more significant enhancement for ASB. This changed bacterial transport induced by antibiotics held true in solution with humic acid, in river water and groundwater samples. Antibiotics enhanced the transport of ARB and ASB in porous media via different mechanisms (ARB: competition of deposition sites; ASB: enhanced motility and chemotaxis effects). Clearly, since ASB are likely to escape sites containing antibiotics, these locations are more likely to accumulate ARB and their environmental risks would increase.
Asunto(s)
Antibacterianos , Genes Bacterianos , Antibacterianos/farmacología , Porosidad , Escherichia coli/genética , Antagonistas de Receptores de Angiotensina/farmacología , Inhibidores de la Enzima Convertidora de Angiotensina/farmacología , Bacterias/genética , Farmacorresistencia Microbiana/genéticaRESUMEN
Solar-driven photosynthesis is a sustainable process for the production of hydrogen peroxide, the efficiency of which is plagued by side reactions. Metal-free covalent organic frameworks (COFs) that can form suitable intermediates and inhibit side reactions show great promise to photo-synthesize H2O2. However, the insufficient formation and separation/transfer of photogenerated charges in such materials restricts the efficiency of H2O2 production. Herein, we provide a strategy for the design of donor-acceptor COFs to greatly boost H2O2 photosynthesis. We demonstrate that the optimal intramolecular polarity of COFs, achieved by using suitable amounts of phenyl groups as electron donors, can maximize the free charge generation, which leads to high H2O2 yield rates (605 µmol g-1 h-1) from water, oxygen and visible light without sacrificial agents. Combining in-situ characterization with computational calculations, we describe how the triazine N-sites with optimal N 2p states play a crucial role in H2O activation and selective oxidation into H2O2. We further experimentally demonstrate that H2O2 can be efficiently produced in tap, river or sea water with natural sunlight and air for water decontamination.
RESUMEN
As novel photocatalysts, covalent organic frameworks (COFs) have potential for water purification. Insufficient exciton dissociation and low charge mobility in COFs yet restricted their photocatalytic activity. Excitonic dissociation and charge transfer in COFs could be optimized via regulating the donor-acceptor (D-A) interactions through adjusting the number of donor units within COFs, yet relevant research is lacking. By integrating the 1,2,4-triazole or bis-1,2,4-triazole unit with quinone, we fabricated COF-DT (with a single donor unit) and COF-DBT (with double donor units) via a facile sonochemical method and used to decontaminate emerging contaminants. Due to the stronger D-A interactions than COF-DT, the exciton binding energy was lower for COF-DBT, facilitating the intermolecular charge transfer process. The degradation kinetics of tetracycline (model contaminant) by COF-DBT (k = (12.21 ± 1.29) × 10-2 min-1) was higher than that by COF-DT (k = (5.11 ± 0.59) × 10-2 min-1) under visible-light irradiation. COF-DBT could efficiently photodegrade tetracycline under complex water chemistry conditions and four real water samples. Moreover, six other emerging contaminants, both Gram-negative and Gram-positive strains, could also be effectively eliminated by COF-DBT. High tetracycline degradation performance achieved in a continuous-flow system and in five reused cycles in both laboratory and outdoor experiments with sunlight irradiation showed the stability and the potential for the practical application of COF-DBT.
Asunto(s)
Estructuras Metalorgánicas , Tetraciclina , Antibacterianos , Triazoles , AguaRESUMEN
Antibiotic resistance genes (ARGs) have become as emerging contaminant with great concerns worldwide due to their threats to human health. It is thus urgent to develop techniques to degrade ARGs in water. In this study, MoS2@Fe3O4 (MF) particles were fabricated and used to activate peroxymonosulfate (PMS) for the degradation of four types of free DNA bases (T, A, C, and G, major components of ARGs) and ARGs. We found that MF/PMS system could effectively degrade all four DNA bases (T within 10 min, A within 30 min, C within 5 min, and G within 5 min) in very short time. During the reaction process, MF could activate PMS to form the reactive radicals such as ·OH, SO4·-, O2·-, and 1O2, contributing to the degradation of DNA bases. Due to the low adsorption energy, high charge transfer, and great capability for PMS cleavage, MF exhibited excellent PMS adsorption and activation performances. MoS2 in MF could enhance the cycle of Fe(III)/Fe(II), improving the catalytic performance. Excellent catalytic performances of MF/PMS system were achieved in complex water matrix (including different solution pH, coexisting of anions and natural organic matter) as well as in real water samples (including tap water, river water, sea water, and sewage) especially under high salinity conditions due to the generation of Cl· radicals and HClO species. MF/PMS system could also efficiently degrade ARGs (chromosomal kanR and plasmid gmrA) and DNA extracted from antibiotic resistant bacteria (ARB) in super-short time. Moreover, complete disinfection of two types of model ARB (E. coli K-12 MG 1655 and E. coli S17-1) could also be achieved in MF/PMS system. The high degradation performances of MF/PMS system achieved in the reused experiments and the 14-day continuous flow reactor experiments indicated the stability of MF particles. Due to the magnetic property, it would be convenient to separate MF particles from water after use via using magnet, facilitating their reuse of MF and avoiding potential water contamination by catalysts. Overall, this study not only provided a deep insight on Fe/Mo-triggered PMS activation process, but also provided an effective and reliable approach for the treatment of DNA bases, ARGs, DNA, and ARB in water.
Asunto(s)
Compuestos Férricos , Molibdeno , Humanos , Antagonistas de Receptores de Angiotensina , Escherichia coli , Inhibidores de la Enzima Convertidora de Angiotensina , Peróxidos/química , ADN , Farmacorresistencia Microbiana/genética , Fenómenos Magnéticos , AguaRESUMEN
Crystals with significant length reduction at an accessible low pressure are highly desirable for piezo-responsive devices. Here, we show a molecular crystal [Ni(en)3](ox) (en = ethylenediamine and ox = oxalate anion) that exhibits an abrupt shape change with a contraction rate of â¼4.7% along its c axis near the phase transition pressure of â¼0.2 GPa. High-pressure single-crystal X-ray diffraction and Raman spectroscopy measurements reveal that this material undergoes a first-order ferroelastic transition from high-symmetry trigonal P3Ì 1c to low-symmetry monoclinic P21/n at â¼0.2 GPa. The oxalate anions serve as unique components, and their disorder-order transformation and rotation of 90° through cooperative intermolecular hydrogen bonding triggered unconventional anisotropic microsize contraction under compression, which can be appreciated visually. Such a prominent directional deformation at a low pressure driven by molecular motors of oxalate anions provides insights for the design of novel molecular crystal-based piezo-responsive switches and actuators in deep-sea environments.
RESUMEN
The amorphous selenium (a-Se) was studied via x-ray diffraction (XRD) under pressures ranging from ambient pressure up to 30 GPa at room temperature to study its high-pressure behavior. Two compressional experiments on a-Se samples, with and without heat treatment, respectively, were conducted. Contrary to the previous reports that a-Se crystallized abruptly at around 12 GPa, in this work we report an early partially crystallized state at 4.9 GPa before completing the crystallization at around 9.5 GPa based onin-situhigh pressure XRD measurements on the a-Se with 70 °C heat treatment. In comparison, crystallization pressure on another a-Se sample without thermal treatment history was observed to be 12.7 GPa, consistent with the previously reported crystallization pressure. Thus, it is proposed in this work that prior heat treatment of a-Se can result in an earlier crystallization under high pressure, which helps to understand the possible mechanism caused by the previous controversial reports on pressure induced crystallization behavior in a-Se.
RESUMEN
The propagation of antibiotic-resistant bacteria (ARB) greatly endangers the ecological safety and human health. This study employed pyrite (FeS2, naturally abundant mineral) for periodate (PI) activation to disinfect ARB. FeS2/PI system could disinfect 1 × 107 CFU mL-1 of kanamycin-resistant E.coli below the limit of detection in 20 min. Efficient ARB inactivation performance was achieved in pH from 3 to 9, ionic strength from 0 to 300 mM, with HA (0.1-10 mg L-1) in suspension, and in real water samples including tap water, river water and sewage. FeS2/PI system could also efficiently disinfect gentamycin-resistant E.coli and Gram-positive B. subtilis. The generated reactive species including Fe(IV), ·O2- and ·OH would attack cell membrane and overwhelmed intracellular defense system. The intracellular kanamycin resistance genes in cells would be released and then degraded in FeS2/PI system. PI preferred to be adsorbed on Fe site of FeS2 (with lower adsorption energy, more occupancy of bonding state and stronger bonding strength). The subsequent transfer of electron cloud from Fe site to PI would cleave IO bond to generate reactive species. Moreover, FeS2/PI system could also combine with sand filtration system to efficiently capture and disinfect ARB. Therefore, FeS2/PI system is a promising approach to inactivate ARB in different scenarios.
Asunto(s)
Antagonistas de Receptores de Angiotensina , Desinfección , Humanos , Inhibidores de la Enzima Convertidora de Angiotensina , Antibacterianos/farmacología , Bacterias , AguaRESUMEN
As novel metal-free photocatalysts, covalent organic frameworks (COFs) have great potential to decontaminate pollutants in water. Fast charge recombination in COFs yet inhibits their photocatalytic performance. We found that the intramolecular charge transfer within COFs could be modulated via constructing a donor-acceptor (D-A) structure, leading to the improved photocatalytic performance of COFs toward pollutant degradation. By integrating electron donor units (1,3,4-thiadiazole or 1,2,4-thiadiazole ring) and electron acceptor units (quinone), two COFs (COF-TD1 and COF-TD2) with robust D-A characteristics were fabricated as visible-light-driven photocatalysts to decontaminate paracetamol. With the readily excited electrons in 1,3,4-thiadiazole rings, COF-TD1 exhibited efficient electron-hole separation through a push-pull electronic effect, resulting in superior paracetamol photodegradation performance (>98% degradation in 60 min) than COF-TD2 (â¼60% degradation within 120 min). COF-TD1 could efficiently photodegrade paracetamol in complicated water matrices even in river water, lake water, and sewage wastewater. Diclofenac, bisphenol A, naproxen, and tetracycline hydrochloride were also effectively degraded by COF-TD1. Efficient photodegradation of paracetamol in a scaled-up reactor could be achieved either by COF-TD1 in a powder form or that immobilized onto a glass slide (to further ease recovery and reuse) under natural sunlight irradiation. Overall, this study provided an effective strategy for designing excellent COF-based photocatalysts to degrade emerging contaminants.
Asunto(s)
Estructuras Metalorgánicas , Tiadiazoles , Estructuras Metalorgánicas/química , Acetaminofén , AguaRESUMEN
To improve bacterial capture performance and inactivate bacteria, zero-valent iron (ZVI) were added into sand columns as permeable filtration media. Both Gram-negative Escherichia coli and Gram-positive Bacillus subtilis (1.25 ×107 cells/mL) could be completely retained in 10 wt% ZVI amended sand columns in different ionic strength solutions (1-100 mM NaCl) at both slow (4 m/day) and fast (90 m/day) flow velocities. The strong adsorption property of ZVI contributed to the improved bacterial capture performance of sand columns. Moreover, ZVI could inactivate nearly all captured bacteria. Clearly, ZVI added as permeable layer not only could significantly enhance bacterial capture but also would inactivate the captured bacteria. ZVI could destroy the structure of extracellular polymeric substance and cell membrane. Intracellular oxidative stress was then increased and ATP content was decreased, causing bacterial death. Furthermore, high bacterial capture efficiencies were achieved with the coexisting of humic acid (0.2-5 mg/L), in actual river water samples, and longtime filtration processes. ZVI could be regenerated and reused as permeable layer to efficiently capture bacteria. Furthermore, sand columns with 10 wt% ZVI amendment could completely capture and inactivate 4.0 × 106 cells/mL algae. Clearly, ZVI amended sand filtration systems have potentials to purify water contaminated by pathogenic bacteria and algae.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Bacterias , Matriz Extracelular de Sustancias Poliméricas/química , Hierro/química , Arena , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
Pressure-induced sp2-to-sp3 transitions in graphite have been studied for decades by experiments and simulations. In general, pressures of 15-18 GPa are needed to initiate structural transitions in graphite at room temperature, and the high-pressure phases are usually unquenchable, as evidenced by in situ resistivity and optical transmittance measurements, X-ray diffraction (XRD), and inelastic X-ray scattering (IXS). However, our in situ Raman results show that the onset transition pressure can be as low as 9.7 GPa when using the methanol-ethanol-water (MEW) mixture as the pressure-transmitting medium (PTM), indicated by an additional GD Raman peak caused by the sp3 bonding between adjacent graphite layers. Moreover, using a combination of XRD, Raman, X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM), we show that a small amount of sp3 bonds associated with a unique feature of cross stacking are present in the recovered samples. Our findings will be useful to understand the intricate structural transitions in graphite-like materials under compression.
RESUMEN
A series of in situ synchrotron X-ray diffraction (XRD) measurements were carried out, combined with first-principles calculations, to study structural phase transitions of selenium at high pressures and room temperature. Several phase transitions were observed, among which an isostructural phase transition was found at around 120â GPa for the first time. Evolved from the rhombohedral (space group R 3 m) structure (Se-V), the new phase (Se-V') exhibited an interesting increase of lattice parameter a at pressures from 120 to 148â GPa, known as negative linear compressibility (NLC). The discovery of NLC behavior observed in this work is mainly attributed to the accuracy and fine steps controlled by the membrane system for in situ XRD data collected with an exposure time of 0.5â s. After 140â GPa, a body-centered cubic (b.c.c.) structure Se-VI (space group Im 3 m) was formed, which remains stable up to 210â GPa, the highest pressure achieved in this study. The bulk moduli of phases Se-V, Se-V' and Se-VI were estimated to be 83 ± 2, 321 ± 2 and 266 ± 7â GPa, respectively, according to the P-V curve fit by the third-order Birch-Murnaghan equation of state. The Se-V' phase shows a bulk modulus almost 4 times larger than that of the Se-V phase, which is mainly due to the effect of its NLC. NLC in a higher pressure range is always more significant in terms of fundamental mechanism and new materials discovery, yet it has barely been reported at pressures above 100â GPa. This will hopefully inspire future studies on potential NLC behaviors in other materials at ultra-high pressure.
RESUMEN
Covalent Organic Frameworks (COFs) have attracted extensive attention for the photocatalytic degradation of emerging organic contaminants. The difficulty in separation and recovery after use yet would hinder the practical application of COFs in powder form. In present study, COFs in film form were fabricated via using chitosan as the film-substrate to support COFs (CSCF). We found that CSCF could effectively degrade two types of emerging organic contaminants under visible light irradiation. Particularly, CSCF could effectively degrade 99.8% of paracetamol (PCT) and 94.0% of bisphenol A (BPA) within 180 min under visible light irradiation. â¢O2- and h+ played dominant roles during the photocatalytic degradation process. Hydroxylation and cleavage were the main degradation processes. CSCF exhibited good photocatalytic degradation performance in a broad range of ionic strengths, in the presence of common coexisting ions including Cl-, NO3- and SO42-, in a wide range of pH (5-11), and in real water samples including tap water, river water and lake water. Moreover, CSCF could be easily collected after use and exhibited excellent degradation performance in five successive cycles. CSCF has potential applications to treat water with either PCT or BPA contamination. This study provided a new insight into the practical application of COFs.