Unveiling antibiotic contamination in surface water: A study of the Huaihe River Basin's Huaibei Plain, a significant Chinese herbal medicine planting region.

The abuse of antibiotics has caused the accumulation of antibiotic residues in environmental media, threatening the ecosystem and human health. Many studies on the distribution of aqueous antibiotics have been reported. However, the pollution status of antibiotics in the environment in Chinese herbal medicine planting areas is rarely comprehensively clarified, resulting in the lack of updated pollution data and conducive suggestions for ecological cultivation and sustainable development of Chinese herbal medicine. Thus, we comprehensively investigated the distribution, profiles, sources, and risks of the antibiotics in the surface water of an important tributary of the Huaihe River Basin, located in Bozhou City, a significant Chinese herbal medicine planting region. Solid-phase extraction coupled with an ultra-performance liquid chromatography-tandem mass spectrometer (SPE-UPLC-MS) was utilized to detect the antibiotics in the water. 27 kinds of antibiotics were identified with total concentrations ranging from 75.01 to 1737.99 ng·L-1, with doxycycline (DC) and doxycycline hydrochloride (DCH) possessed the highest concentration. And DC, DCH, oxilinic acid (OA), sulfamethoxazole (SMZ), clarithromycin (CLA), and roxithromycinum (ROX) were the main antibiotics detected in this basin. Correlation analysis and principal component analysis (PCA) indicated that animal husbandry was the primary source of antibiotics. Furthermore, the ecological risk assessment revealed that certain antibiotics could seriously threaten the survival of aquatic organisms, implying that local Chinese herbal medicines might be at similar growth risk. The drinking risk assessment showed that antibiotics in the water posed low risks for human, and children faced a greater drinking risk than adults. The study can help to facilitate the management of aqueous antibiotic pollution for the ecological cultivation and safe production of Chinese herbal medicine.

Assessing the impacts and contamination potentials of landfill leachate on adjacent groundwater systems.

Landfilling is a globally prevalent method for managing municipal solid waste disposal. Nonetheless, the potential for serious contamination and the significant regional disparities in the leachate produced pose varying degrees of risks to groundwater quality. Previous studies have focused on a single landfill or the same geo-climatic conditions, with a limited number of samples having resulted in a narrow distribution of landfill age and scale, which prevents the description of the pattern of change in landfill age and scale. As well as the effect of this change on the contaminants in the landfill leachate and surrounding groundwater is still unclear. Therefore, we sampled and analyzed leachate and surrounding groundwater from 62 landfills with different landfill ages, scales, and operating conditions in a region with dense and varied topography and climate. Aim to explore the effects of different landfill ages, scales, and operating conditions on contaminants in leachate and surrounding groundwater. Findings indicate that pollutant profiles in different media are influenced by the age, scale, and operational status of the landfill, and the impact of leachate on pollutant types and concentrations in groundwater is limited. A significant correlation exists between the concentration of contaminants in the groundwater affected by leaching from the impermeable layer and the age and scale of the landfill when compared to the leachate. The contamination potentials posed by different pollutants vary across environmental media. Total dissolved solids and NH4+-N in leachate presented high contamination potentials, whereas elemental metalloids (Mn, Al, Ba, and Fe) in the surrounding groundwater posed high environmental concerns. These insights furnish new avenues for monitoring, identification, and safeguarding against pollutants in landfills and proximate groundwater, which is imperative for the sustainable management of municipal waste.

Speciation Characterization and Environmental Stability of Arsenic in Arsenic-Containing Copper Slag Tailing.

The increasing presence of arsenic-containing impurities within Cu ores can adversely affect the smelting process and aggravate the environmental impact of slag tailing. This study investigates the geochemical, mineralogical, and chemical speciation characteristics to better understand the association and environmental stability of metal(loid)s in copper slag tailing. The results indicate that the predominant chemical compositions of the selected slag tailing are Fe2O3 (54.8%) and SiO2 (28.1%). These tailings exhibit potential for multi-elemental contamination due to elevated concentrations of environmentally sensitive elements. Mineral phases identified within the slag tailings include silicate (fayalite), oxides (magnetite and hematite), and sulfides (galena, sphalerite, arsenopyrite, and chalcopyrite). The consistent presence of silicate, iron, arsenic, and oxygen in the elemental distribution suggests the existence of arsenic within silicate minerals in the form of Si-Fe-As-O phases. Additionally, arsenic shows association with sulfide minerals and oxides. The percentages of arsenite (As(III)) and arsenate (As(V)) within the selected slag tailings are 59.4% and 40.6%, respectively. While the slag tailings are deemed non-hazardous due to the minimal amounts of toxic elements in leachates, proper disposal measures should be taken due to the elevated carbonate-bound levels of As and Cu present in these tailings.

Insights into the biogeochemical transformation, environmental impacts and biochar-based soil decontamination of antimony.

Every year, a significant amount of antimony (Sb) enters the environment from natural and anthropogenic sources like mining, smelting, industrial operations, ore processing, vehicle emissions, shooting activities, and coal power plants. Humans, plants, animals, and aquatic life are heavily exposed to hazardous Sb or antimonide by either direct consumption or indirect exposure to Sb in the environment. This review summarizes the current knowledge about Sb global occurrence, its fate, distribution, speciation, associated health hazards, and advanced biochar composites studies used for the remediation of soil contaminated with Sb to lessen Sb bioavailability and toxicity in soil. Anionic metal(loid) like Sb in the soil is significantly immobilized by pristine biochar and its composites, reducing their bioavailability. However, a comprehensive review of the impacts of biochar-based composites on soil Sb remediation is needed. Therefore, the current review focuses on (1) the fundamental aspects of Sb global occurrence, global soil Sb contamination, its transformation in soil, and associated health hazards, (2) the role of different biochar-based composites in the immobilization of Sb from soil to increase biochar applicability toward Sb decontamination. The review aids in developing advanced, efficient, and effective engineered biochar composites for Sb remediation by evaluating novel materials and techniques and through sustainable management of Sb-contaminated soil, ultimately reducing its environmental and health risks.

Study on the solidification performance and mechanism of heavy metals by sludge/biomass ash ceramsites, biochar and biomass ash.

Industrial by-products are stored in large quantities in the open, leading to wasted resources and environmental pollution, and the natural environment is similarly faced with phosphate depletion and serious water and soil pollution. This study uses these by-products to produce a new sludge/biomass ash ceramsite that will be used to adsorb nitrogen and phosphorus from wastewater, and solidify heavy metals in the soil while releasing Olsen P. The sludge/biomass ash ceramsites are made using sewage sludge and biomass ash in a certain ratio calcined at high temperatures and modified for the adsorption of nitrogen and phosphorus from wastewater. Sludge/biomass ash ceramsites before and after phosphorus adsorption, biochar and biomass ash were compared to analyze their heavy metal adsorption capacity and potential as phosphate fertilizer. After phosphorus adsorption, the sludge/biomass ash ceramsites released effective phosphorus steadily and rapidly in the soil, with a greater initial release than biochar and biomass ash, and the ceramsites were in a granular form that could be easily recycled. Biochar and biomass residue, due to their surface functional groups, are better at solidifying heavy metals than sludge/biomass ash ceramsites. Biochar, biomass ash and sludge/biomass ash ceramsites significantly reduced the concentrations of Cd, Cu, Pb and Zn in the soil. Correlation analysis demonstrated that there was a synergistic relationship between the increase in soil Olsen P content and the change in pH, with the increase in soil Olsen P content and the increase in pH contributing to heavy metal solidification.

Hydrochemistry, quality, and integrated health risk assessments of groundwater in the Huaibei Plain, China.

Groundwater is an essential freshwater resource utilized in industry, agriculture, and daily life. In the Huaibei Plain (HBP), where groundwater significantly influences socio-economic development, information about its quality, hydrochemistry, and related health risks remains limited. We conducted a comprehensive groundwater sampling in the HBP and examined its rock characteristics, water quality index (WQI), and potential health risks. The results revealed that the primary factors shaping groundwater hydrochemistry were rock dissolution and weathering, cation exchange, and anthropogenic activities. WQI assessment indicated that only 73% of the groundwaters is potable, as Fe2+, Mn2+, NO3-, and F- contents in the water could pose non-carcinogenic hazards to humans. Children were more susceptible to these health risks through oral ingestion than adults. Uncertainty analysis indicated that the probabilities of non-carcinogenic risk were approximately 57% and 31% for children and adults, respectively. Sensitivity analysis further identified fluoride as the primary factor influencing non-carcinogenic risks, indicating that reducing fluoride contamination should be prioritized in future groundwater management in the HBP.

The Influence of Pulmonary Veins' Anatomic Features and Catheter Coaxiality on Cryoballoon Ablation Results for Paroxysmal Atrial Fibrillation.

A total of 172 consecutive patients with sympathetic paroxysmal atrial fibrillation who received cryoballoon (CB) ablation from 2020 to 2021 were retrospectively analyzed in this study. Catheter coaxiality and anatomic features of pulmonary veins (PVs) on computed tomography images were explored by several parameters and their influence on the cryoablation results was then analyzed. The rate of incomplete CB occlusion was significantly higher for inferior than superior PVs. A multivariate analysis revealed that a short distance (<6.3 mm) from PV ostium to first branch (D-PVB) and a small angle (<32.5°) of first branch were independent predict factors for an incomplete CB occlusion in right inferior PVs (RIPVs). A combination of D-PVB and angle of first branch could elevate the predictor value for an incomplete balloon occlusion with a sensitivity of 0.85 and specificity of 1.0 for RIPVs. For PVs with a perfect balloon occlusion, the best catheter coaxiality was observed in right superior PV while the worst catheter coaxiality was observed in RIPV. A more aggressive catheter manipulation with a "7" or "reverse-U" shape of long sheath could obtain a better catheter coaxiality compared with conventional manipulation strategy for RIPVs. In Conclusion, a short D-PVB and a small angle of first branch were independent predict factors for an incomplete CB occlusion in RIPVs. A more aggressive catheter manipulation strategy was recommended to achieve a complete balloon occlusion and a better catheter coaxiality for RIPVs.

Influence of biochar produced from negative pressure-induced carbonization on transformation of potentially toxic metal(loid)s concerning plant physiological characteristics in industrially contaminated soil.

Soil contamination and its subsequent impact on the food chain is a pressing challenge in the present day. The application of biochar has demonstrated a significant and positive effect on soil health, thereby enhancing plant growth and development. However, the application of biochar (BC) produced from negative pressure-induced carbonization to mitigate metal(loid) contamination is a new strategy that has been studied in current research. Results depicted that the application of biochar derived from the negative pressure carbonization (vacuum-assisted biochar (VBC) has a significant (p ≤ 0.05) positive impact on plant growth and physiological characteristics by influencing immobilization and speciation of metal(loid) in the soil system. Moreover, the interactive effect of VBC on physiological characteristics (photosynthesis, gas exchange, and chlorophyll contents) and antioxidant activities of maize (Zea mays L.) was significantly (p ≤ 0.05) positive by confining the translocation and movement of metal(loid)s to the aerial part of the maize plant. X-ray diffraction (XRD) provided information on the structural and chemical changes induced by the VBC-500 °C explaining metal(loid) adsorption onto mineral surfaces and complexation that can affect their mobility, availability, and toxicity in the contaminated soil. Fourier transform infrared spectroscopy (FTIR) further provided a more detailed understanding of the metal(loid)s and biochar complexation mechanisms influenced by VBC-based functional groups -OH, C-Hn, -COOH, CO, C-O-C, CC, C-O, C-H, OH, and C-C in the binding process. These results suggest that the application of biochar prepared at 500 °C under negative pressure-induced carbonization conditions to the soil is the most efficient way to reduce the uptake and transfer of metal(loid)s by influencing their mobility and availability in the soil-plant system.

Spectroscopic fingerprinting, pollution characterization, and health risk assessment of potentially toxic metals from urban particulate matter.

The unprecedented stride of urbanization and industrialization has given rise to anthropogenic input of tiny particulates into the air. Urban particulate matter (PM) armored with potentially toxic metals (PTMs) could be lethal to the environment and human health. Therefore, the present study was planned to investigate the spectroscopic fingerprinting, pollution status and health risk of PM-associated PTMs collected from ten functional areas of Lahore, Pakistan. The diverged results of studied qualitative and quantitative analyses showed distinct compositional and pollution characteristics of PTMs in urban PM with respect to selected functional areas. The XRD results evident the fractional presence of metal-containing minerals, i.e., pyrite (FeS2), calcite (CaCO3), zinc sulfate (ZnSO4), and chalcostibite (CuSbS2). Several chemical species of Zn, Pb, and As were found in PM of various functional areas. However, morphologies of PM showed anthropogenic influence with slight quantitative support of PTMs presence. The cumulative representation of PTMs pollution of all selected areas depicted that Cd was heavily polluted (Igeo=3.21) while Cr (Igeo=1.82) and Ni (Igeo=2.11) were moderately polluted PTMs. The industrial area having high pollution status of Cd (Igeo=5.54 and EF=18.07), Cu (Igeo=6.4 and EF=32.61), Cr (Igeo=4.03 and EF=6.53), Ni (Igeo=5.7 and EF=20.17), and Zn (Igeo=4.87 and EF=11.27) was prominent among other studied areas. The PTMs were likely to pose a high non-cancerous risk in IndAr (HI = 7.48E+00) and HTV (HI = 1.22E +00) areas predominantly due to Zn with HQ > 1. However, Cr was prominent to cause cancerous risks with values beyond the tolerable range (1.00E-04 to 1.00E-06).

Characteristics and health risk assessment of heavy metals in dust of a waste printed circuit board recycling workshop, China.

Physical separation is the most widely used technology concerning waste printed circuit board (WPCB) recycling in practical terms. The dust generated from the process poses a significant environmental and human health risk. Amounts of heavy metals in dust present in each processing zone of the workshop showed differences. However, to date, few studies have reported this. The mean metal concentrations in workshop dust from different processing zones were investigated in this study and it was found that Zn, Pb, and Sn appeared in higher levels than other metals, followed by Mn > Cr > Ni > V > As > Cd. The enrichment factors (EFs) ranged from 1.15 to 207.4, and decreased in the order of Cu > Sn > Pb > Zn > Cd > Cr > Ni > V > As, which was exactly consistent with the geo-accumulation index values. The comparison of the EF values of workshop dust in and outside showed that the EFs in workshop dust were mostly smaller. Metals in the dust of the crushing zone (CrZ) showed significant and strong enrichment. The non-carcinogenic risk for different processing zones was all less than 1, which is recognized safety for people's health. The total carcinogenic risk from Cr, and Ni in all zones and As in the CrZ exposure was not negligible. The carcinogenic and non-carcinogenic risks in the CrZ were significantly higher than in the other zones. Masks to filter dust, a ventilation system, daily work hours reduction, and automation improvement was proposed for reducing workers' exposure to heavy metal.

Neutrophil extracellular traps contributing to atherosclerosis: From pathophysiology to clinical implications.

Neutrophil extracellular traps (NETs) are network-like structures of chromatin filaments decorated by histones, granules, and cytoplasmic-derived proteins expelled by activated neutrophils under multiple pathogenic conditions. NETs not only capture pathogens in innate immunity but also respond to sterile inflammatory stimuli in atherosclerosis, such as lipoproteins and inflammatory cytokines. Atherosclerosis is a lipid-driven chronic inflammatory disease characterized by the accumulation and transformation of inflammatory cells, and smooth muscle cells in the intimal space. NETs-derived extracellular components possess toxic and proinflammatory properties leading to cellular dysfunction and tissue damage, which may establish a link among lipid metabolism, inflammatory immunity, and atherosclerosis. In this review, we discuss recent advances regarding the role of NETs engaged in the pathogenesis of atherosclerosis, particularly focusing on the interaction with lipids and inflammasomes, crosstalk with smooth muscle cells and inflammatory cells, and the association with aging. We also evaluate the current knowledge on the potential of NETs as biomarkers and therapeutic targets for atherosclerosis and its related diseases in clinical practice.

Impregnation of biochar with montmorillonite and its activation for the removal of azithromycin from aqueous media.

An inexpensive and environmentally friendly composite synthesized from rice husk, impregnated with montmorillonite and activated by carbon dioxide, was investigated for the removal of azithromycin from an aqueous solution. Various techniques were used to characterize adsorbents in detail. The sorption process was primarily regulated by the solution pH, pollutant concentration, contact duration, adsorbent dose, and solution temperature. The equilibrium data were best analyzed using the nonlinear Langmuir and Sips (R2 > 0.97) isotherms, which revealed that adsorption occurs in a homogenous manner. The adsorption capacity of pristine biochar and carbon dioxide activated biochar-montmorillonite composite was 33.4 mg g-1 and 44.73 mg g-1, respectively. Kinetic studies identified that the experimental data obeyed the pseudo-second-order and Elovich models (R2 > 0.98) indicating the chemisorption nature of adsorbents. The thermodynamic parameters determined the endothermic and spontaneous nature of the reaction. The ion exchange, π-π electron-donor-acceptor (EDA) interactions, hydrogen-bonding, and electrostatic interactions were the plausible mechanisms responsible for the adsorption process. This study revealed that a carbon dioxide activated biochar-montmorillonite composite may be used as an effective, sustainable, and economical adsorbent for the removal of azithromycin from polluted water.

Adsorption of nitrogen and phosphorus from wastewater by modified sludge/biomass ash ceramsite: Preparation, adsorption mechanism, and sustainable analysis.

Excessive ammonium and phosphate in aquatic settings may produce major eutrophication. Adsorbents can be used to reduce the eutrophication of natural water bodies. In this study, a sustainable and efficient ceramic adsorbent (sludge/biomass ash ceramsite [SBC]) was prepared by using sludge and biomass ash with a weight ratio of 1:1; the sintering parameters were 1070°C for 15 min. The NH4 + -N and P adsorption capabilities were improved by utilizing 1 mol L-1 NaOH and 1.6 mol L-1 La(NO3 )3 ·6H2 O for modification. When the pH and duration were 7 and 1440 min, respectively, the maximum bending capacity of ammonia nitrogen and phosphorus was 3.2 and 2.1 mg g-1 at 308 K. The pseudo-second-order kinetic model better describes the adsorption dynamics of NH4 + -N and P, whereas the Langmuir model better describes the adsorption isotherm models of NH4 + -N and P. The adsorption mechanism of SBC-NaOH on NH4 + -N is ion exchange between Na+ and NH4 + , whereas the adsorption mechanism of SBC-La on phosphorus is ion exchange and La3+ adsorption. SBC combines efficient wastewater purification with the reuse of solid waste. The findings gave rise to the possibility of recycling ceramics as a plant fertilizer with a delayed release in the future. PRACTITIONER POINTS: New ceramsite was made from sludge and biomass ash. NH4 + -N (3.2 mg g-1 ) and P (2.1 mg g-1 ) were effectively adsorbed by ceramsite. The mechanism of NH4 + -N and P adsorption by ceramsite was studied. Absorbed ceramsite can be used as slow-release fertilizer in plant cultivation.

Synthesis of ordered mesoporous silica from biomass ash and its application in CO2 adsorption.

It is possible to achieve high-value utilization of solid wastes and lower the cost of mesoporous silica synthesis by synthesizing mesoporous silica from solid wastes. In this study, silica was extracted using the alkali fusion method using biomass ash as the starting material. Biomass ash based mesoporous silica was successfully prepared by hydrothermal method with silicon extract solution as silicon source. The optimum conditions for preparation were determined as follows: addition of cetyltrimethylammonium bromide was 0.45g, hydrothermal temperature was 120 °C, hydrothermal time was 24h. The prepared mesoporous silicon was systematically characterized, and the results showed that high surface area (495 m2/g) and ordered pore structure appeared in the synthesized mesoporous silica materials. The synthesized mesoporous silica showed excellent CO2 adsorption performance (0.749 mmol/g) at 25 °C and 1 bar. According to the calculation of adsorption isotherm and thermodynamics, non-linear Freundlich model can fit the adsorption isotherm better and the adsorption heat of mesoporous silica is less than 20 kJ/mol, which belongs to physical adsorption. After five cycles of CO2 adsorption, the adsorption property was still above 90%, and the CO2/N2 adsorption selectivity reached 396.6, showing good regeneration performance and adsorption selectivity. This research can provide a new possibility for the high-value exploitation of biomass ash and reducing the cost of synthetic mesoporous silica.

Spatial-temporal distribution, source identification, risk assessment and water quality assessment of trace elements in the surface water of typical tributary in Yangtze River delta, China.

As China's first cross-province ecological compensation mechanism pilot area in the hinterland of the Yangtze River Delta, Xin'an River has been hotspot in the study of rational utilization of ecological resources, and the functional value of its ecosystem services has been widely concerned. As an important tributary of the upper reaches of Xin'an River, Fengle River may affect the whole basin. The spatial-temporal distributions, occurrence, water quality and risk assessment of trace elements were studied in Fengle River in three seasons. High element concentrations were found in the downstream. Traceability models results showed that the major sources of trace elements were related to different human activities. The water quality was worse downstream in the wet season, and was more suitable for irrigation in the dry season. Risk assessment results showed that Zn, Cu, Mn, Co, and As were able to pose the risk to the ecological environment and human.

Characteristics of trace elements and potential environmental risks of the ash from agricultural straw direct combustion biomass power plant.

The rapid expansion of biomass power generation has resulted in a large amount of ash, which need to be treated urgently. The trace elements in ash also have environmental risks during treatment. Therefore, the essential characteristics and potential environmental risks of biomass ash generated by direct combustion of agricultural straw were studied. The leaching characteristics of elements, including major elements (Mg, K, Ca) and trace elements (V, Cr, Mn, Co, Ni, Cu, Zn, Cd, As, Pb and Ba), in fly ash and slag produced by biomass power plant were analyzed through the static leaching experiments of simulating the possible pH value of natural water in the laboratory. The results show that the trace elements are enriched in fly ash and slag, which may be related to the volatility of elements during combustion. And during the leaching test, the leaching concentration of major and trace elements in fly ash is higher than that in slag. Sequential chemical extraction is used to reveal the occurrence forms of trace elements in biomass ash. Except for residue, Mn, Co, Zn, Cd, and Pb in fly ash mainly exist in carbonate bound, V and As are Fe-Mn oxides bound, and Cr, Ni, Cu, and Ba are mainly organic matter bound. In the slag, Cd is mainly carbonate bound, Cu is mainly organic matter bound, while other elements are mainly Fe-Mn oxides bound. The Risk Assessment Code values calculated based on the existing forms of elements show that As and Cd in slag and Mn, Co, Pb and Cd in fly ash need special attention during utilization. The research results can provide reference for the management and utilization of biomass ash.

Characterization of the Physical Chemistry Properties of Iron-Tailing-Based Ceramsite.

In order to deal with the problems of resource waste and environmental pollution caused by solid waste, iron tailings (mainly SiO2, Al2O3 and Fe2O3) were used as the main raw material to create a type of lightweight and high-strength ceramsite. Iron tailings, dolomite (industrial grade, purity 98%) and a small amount of clay were combined in a N2 atmosphere at 1150 °C. X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and a themogravimetric analysis (TGA) were performed and the specific surface area was analyzed to determine the strength and adsorption of the ceramsite. The results of the XRF showed that SiO2, CaO and Al2O3 were the main components of the ceramsite, with MgO and Fe2O3 also included. The results of the XRD and SEM-EDS showed that the ceramsite contained several kinds of minerals and was mainly composed of akermanite, gehlenite and diopside, and that the morphology of the internal structure of the ceramsite was mainly massive and contained a small number of particles. The ceramsite could be used in engineering practice to improve the mechanical properties of materials and meet the requirements of actual engineering for the strength of materials. The results of the specific surface area analysis showed that the inner structure of the ceramsite was compact and that there were no large voids. The voids were mainly medium and large, with a high stability and strong adsorption ability. The TGA results showed that the quality of the ceramsite samples will continue to increase within a certain range. According to the XRD experimental results and experimental conditions, it was speculated that in the part of the ore phase containing Al, Mg or Ca in the ceramsite, the elements underwent relatively complex chemical reactions with each other, resulting in the formation of an ore phase with a higher molecular weight. This research provides the basis of characterization and analysis for the preparation of high-adsorption ceramsite from iron tailings and promotes the high-value utilization of iron tailings for waste pollution control.

Chenodeoxycholic Acid-Amikacin Combination Enhances Eradication of Staphylococcus aureus.

The rise of antibiotic resistance and dearth of novel antibiotics have posed a serious health crisis worldwide. In this study, we screened a combination of antibiotics and nonantibiotics providing a viable strategy to solve this issue by broadening the antimicrobial spectrum. We found that chenodeoxycholic acid (CDCA), a cholic acid derivative of the traditional Chinese medicine (TCM) Tanreqing (TRQ), synergizes with amikacin against Staphylococcus aureus in vitro, and this synergistic killing was effective against diverse methicillin-resistant S. aureus (MRSA) variants, including small-colony variants (SCVs), biofilm strains, and persisters. The CDCA-amikacin combination protects a mouse model from S. aureus infections. Mechanistically, CDCA increases the uptake of aminoglycosides in a proton motive force-dependent manner by dissipating the chemical potential and potentiates reactive oxygen species (ROS) generation by inhibiting superoxide dismutase activity. This work highlights the potential use of TCM components in treating S. aureus-associated infections and extend the use of aminoglycosides in eradicating Gram-positive pathogens. IMPORTANCE Multidrug resistance (MDR) is spreading globally with increasing speed. The search for new antibiotics is one of the key strategies in the fight against MDR. Antibiotic resistance breakers that may or may not have direct antibacterial action and can either be coadministered or conjugated with other antibiotics are being studied. To better expand the antibacterial spectrum of certain antibiotics, we identified one component from a traditional Chinese medicine, Tanreqing (TRQ), that increased the activity of aminoglycosides. We found that this so-called agent, chenodeoxycholic acid (CDCA), sensitizes Staphylococcus aureus to aminoglycoside killing and protects a mouse model from S. aureus infections. CDCA increases the uptake of aminoglycosides in a proton motive force-dependent manner by dissipating the chemical potential and potentiates ROS generation by inhibiting superoxide dismutase activity in S. aureus. Our work highlights the potential use of TCM or its effective components, such as CDCA, in treating antibiotic resistance-associated infections.

Spatial distribution characteristics and prediction of fluorine concentration in groundwater based on driving factors analysis.

Excess fluoride (F-) in groundwater can be hazardous to human health. A total of 360 ground water samples was collected from northern Anhui, China, to study the levels, distribution, and source of F-. And on this basis, predicting the spatial distribution of F- in a wider scale space. The range of F- was 0.1-5.8 mg/L, with a mean value of 1.2 mg/L, and 26.4 % of the samples exceeded the acceptable level of 1.5 mg/L. Moreover, the water-rock interaction (fluorite dissolution) and cation alternate adsorption were considered to be two main driving factors of high F- in groundwater. To further illustrate the spatial effects, the BME-RF model was established by combining the main environmental factors. The spatial distribution of F- was quantitatively predicted, and the response to environmental variables was analyzed. The R2 of BME-RF model reached 0.93, the prediction results showed that the region with 1.0-1.5 mg/L of F- accounts for 47.2 % of the total area. The predicted F- content of nearly 70 % of groundwater in this area has exceeded 1.0 mg/L, which was dominated by Na+ and HCO3- type. The spatial variability of F- in the study area was mainly affected by hydrogeological conditions, and the vertical distribution characteristics were related to the spatial variation of slope, distance from runoff, and hydrochemical types. The results of the study provide new insights into the F- concentration prediction in underground environment, especially in the borehole gap area.

Role of biochar-based free radicals in immobilization and speciation of metals in the contaminated soil-plant environment.

The structure of biochar produced at various pyrolysis temperatures influences metal geochemical behavior. Here, the impact of wheat straw-derived biochar (300, 500, and 700 °C) on the immobilization and transformation of metals in the contaminated soil-plant system was assessed. The findings of the sequential extraction revealed that biochar additives had a substantial influence on the speciation of Cr, Ni, Pb, and Zn in the contaminated soil. The lowest F1 (exchangeable and soluble fraction) + F2 (carbonate fraction) accounted for Cr (44%) in WB-300, Ni (43.87%) in WB-500, Pb (43.79%), and Zn (49.78%) in WB-700 with applied amendments of their total amounts. The characterization results indicated that high pyrolysis temperatures (300-700 °C) increased the carbon-containing groups with the potential to adsorb metals from the soil-plant environment. The bioconcentration and translocation factors (BCF and TF) were less than 1, indicating that metal concentration was restricted to maize roots and translocation to shoots. Reactive oxygen species (ROS) intracellularly influence metal interactions with plants. Electron paramagnetic resonance (EPR) was performed to determine hydroxyl radical generation (•OH) in plant segments to assess the dominance of free radicals (FRs). Consequently, the formation of •OH significantly depends on the pyrolysis temperature and the interaction with a contaminated soil-plant environment. Thus, metal transformation can be effectively decreased in the soil-plant environment by applying WB amendments.