RESUMEN
The use of solid-state electrolytes (SSEs) instead of those liquid ones has found promising potential to achieve both high energy density and high safety for their applications in the next-generation energy storage devices. Unfortunately, SSEs also bring forth challenges related to solid-to-solid contact, making the stability of the electrode/electrolyte interface a formidable concern. Herein, using a garnet-type Li6.5La3Zr1.5Ta0.5O12 (LLZT) electrolyte as an example, we demonstrated a facile treatment based on the dip-coating technique, which is highly efficient in modifying the LLZT/Li interface by forming a MgO interlayer. Using polyvinyl pyrrolidone (PVP) as a coordination polymer, uniform and crack-free nanofilms are fabricated on the LLZT pellet with good control of the morphological parameters. We found that the MgO interlayer was highly effective to reduce the interfacial resistance to 6 Ω cm2 as compared to 1652 Ω cm2 of the unmodified interface. The assembled Li symmetrical cell was able to achieve a high critical current density of 1.2 mA cm-2 at room temperature, and it has a long cycling capability for over 4000 h. Using the commercialized materials of LiFePO4 and LiNi0.83Co0.07Mn0.1O2 as the cathode materials, the full cells based on the LLZT@MgO electrolyte showed excellent cyclability and high rate performance at 25 °C. Our study shows the feasibility of precise and controllable surface modification based on a simple liquid phase method and highlights the essential importance of interface control for the future application of high-performance solid-state batteries.
RESUMEN
Polyurethane foams (PUFs) are found everywhere in our daily life, but they suffer from poor fire resistance. In this study, expansible graphite (EG) as flame retardant was incorporated into PUFs to improve material fire resistance. With the presence of EGs in the PU matrix, bubble size in PUF became smaller as confirmed by the scanning electron microscopy. The mass density of PUFs is directly proportional to the content of EG additive. The compression strengths of EG0/PUF and EG30/PUF decrease from 0.51 MPa to 0.29 MPa. The Fourier transform infrared spectroscopy (FTIR) analysis of RPUFs showed that the addition of EGs did not change the functional group structures of RPUFs. Thermo-gravimetric analysis (TGA) testing results showed that the carbon residue weight of EG30/PUF is higher than other PU composite foams. The combination of TGA and FTIR indicated that the EG addition did not change the thermal decomposition products of EG0/PUF, but effectively inhibited its thermal decomposition rate. Cone calorimeter combustion tests indicated that the peak of the heat release rate of EG30/PUF significantly decreased to 100.5 kW m-2compared to 390.6 kW m-2for EG0/PUF. The ignition time of EG/PUF composites also increased from 2 s to 11 s with incorporation of 30 wt% EGs. The limiting oxygen index (LOI) and UL-94 standard tests show that the LOI of EG30/PUF can reach 55 vol%, and go through V-0 level. This study showed that adding EG into PU foams could significantly improve the thermal stability and flame retardancy properties of EG/PUF composites without significantly sacrificing material compression strength. The research results provide useful guidelines on industrial production and applications of PUFs.