Effects of Alternating Magnetic Fields on the OER of Heterogeneous Core-Shell Structured NiFe2O4@(Ni, Fe)S/P.

Composition optimization, structural design, and introduction of external magnetic fields into the catalytic process can remarkably improve the oxygen evolution reaction (OER) performance of a catalyst. NiFe2O4@(Ni, Fe)S/P materials with a heterogeneous core-shell structure were prepared by the sulfide/phosphorus method based on spinel-structured NiFe2O4 nanomicrospheres. After the sulfide/phosphorus treatment, not only the intrinsic activity of the material and the active surface area were increased but also the charge transfer resistance was reduced due to the internal electric field. The overpotential of NiFe2O4@(Ni, Fe)P at 10 mA cm-2 (iR correction), Tafel slope, and charge transfer resistance were 261 mV, 42 mV dec-1, and 3.163 Ω, respectively. With an alternating magnetic field, the overpotential of NiFe2O4@(Ni, Fe)P at 10 mA cm-2 (without iR correction) declined by 45.5% from 323 mV (0 mT) to 176 mV (4.320 mT). Such enhancement of performance is primarily accounted for the enrichment of the reactive ion OH- on the electrode surface induced by the inductive electric potential derived from the Faraday induction effect of the AMF. This condition increased the electrode potential and thus the charge transfer rate on the one hand and weakened the diffusion of the active substance from the electrolyte to the electrode surface on the other hand. The OER process was dominantly controlled by the charge transfer process under low current conditions. A fast charge transfer rate boosted the OER performance of the catalyst. At high currents, diffusion exerted a significant effect on the OER process and low OH- diffusion rates would lead to a decrease in the OER performance of the catalyst.

Fluoro-functionalized ionic covalent organic frameworks (F-iCOFs) for highly selective enrichment and sensitive determination of perfluorinated sulfonates by MALDI-MS.

An easily prepared fluoro-functionalized ionic covalent organic framework (F-iCOF) has been implemented into MALDI-TOF MS, enabling the highly selective enrichment and sensitive determination of perfluorinated sulfonate (PFS) contaminants in a rapid and convenient manner. The good thermal stability and excellent optical absorption properties of F-iCOF makes it a brilliant matrix with no background noise. Moreover, benefitting from the large surface area, appropriate pore size, good water dispersibility, and abundant fluorine atom and cationic characteristic of F-iCOF, it exhibited superior adsorption capacity and enrichment selectivity towards PFSs. Good signal responses for PFSs were obtained in the presence of various interfering compounds such as BSA, HA, or even more than 100-fold excess of glutamic acid and similar in structure sodium alkyl sulfonates, highlighting the specific selectivity of F-iCOF. Calibration curves for potassium perflurobutane sulfonate (PFBSK) in tap water and whole blood were established with good linear correlation in the range 1-500 pg mL-1. The limits of detection and quantification for PFBSK were as low as 0.04 pg mL-1 and 0.05 pg mL-1, respectively, which are comparable or better than the existing methods for the determination of PFSs.

Enhanced Alkaline Oxygen Evolution Using Spin Polarization and Magnetic Heating Effects under an AC Magnetic Field.

Renewable electricity from splitting water to produce hydrogen is a favorable technology to achieve carbon neutrality, but slow anodic oxygen evolution reaction (OER) kinetics limits its large-scale commercialization. Electron spin polarization and increasing the reaction temperature are considered as potential ways to promote alkaline OER. Here, it is reported that in the alkaline OER process under an AC magnetic field, a ferromagnetic ordered electrocatalyst can simultaneously act as a heater and a spin polarizer to achieve significant OER enhancement at a low current density. Moreover, its effect obviously precedes antiferromagnetic, ferrimagnetic, and diamagnetic electrocatalysts. In particular, the noncorrected overpotential of the ferromagnetic electrocatalyst Co at 10 mA cm-2 is reduced by a maximum of 36.6% to 243 mV at 4.320 mT. It is found that the magnetic heating effect is immediate, and more importantly, it is localized and hardly affects the temperature of the entire electrolytic cell. In addition, the spin pinning effect established on the ferromagnetic/paramagnetic interface generated during the reconstruction of the ferromagnetic electrocatalyst expands the ferromagnetic order of the paramagnetic layer. Also, the introduction of an external magnetic field further increases the orderly arrangement of spins, thereby promoting OER. This work provides a reference for the design of high-performance OER electrocatalysts under a magnetic field.

Fullerenol as a water-soluble MALDI-MS matrix for rapid analysis of small molecules and efficient quantification of saccharin sodium in foods.

Due to the strong background interferences in the low-mass region and poor reproducibility of conventional organic matrices, it is of great importance to develop a novel matrix for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to qualitatively and quantitatively analyze small molecules. In this work, water-soluble fullerenol C60(OH)24-26 was selected as a MALDI matrix for the analysis of low-molecular-weight compounds in consideration of optical absorption property, water solubility and stability. Compared with the traditional matrices, fullerenol demonstrated lower background interference and stronger peak intensity. In addition, the hydrophilic fullerenol could avoid the heterogeneous crystallization in sample preparation, increase the reproducibility and sensitivity of MALDI-MS, and ameliorate quantitative analysis of small molecules. With saccharin as model analyte, quantitative analysis was carried out using fullerenol as matrix. The results demonstrated satisfying reproducibility and good tolerance to salt. The limit-of-detection of the quantitative analysis was as low as 4 pmol, and the linear range is 1-100 µg mL-1 with R2 greater than 0.99. The analytical results also showed excellent precision and accuracy, low matrix effect and good recovery rate. Fullerenol as a potential matrix was further validated in the quantification of saccharin sodium in different real food samples, such as nuts and drinks. This work not only confirms the potential of fullerenol for the quantitative analysis in food field, but also provides a new technique for rapid analysis of small molecules.

Fabrication of Magnetic Superstructure NiFe2O4@MOF-74 and Its Derivative for Electrocatalytic Hydrogen Evolution with AC Magnetic Field.

As an ideal hydrogen production route, electrolyzed water still faces the challenges of high cost of noble-metal electrocatalysts and low performance of non-noble-metal catalysts in scalable applications. Recently, introduction of external fields (such as magnetic fields, light fields, etc.) to improve the electrocatalytic water splitting performance of non-noble-metal catalysts has attracted great attention due to their simplicity. Here, a simple method for preparing magnetic superstructure (NiFe2O4@MOF-74) is described, and the hydrogen evolution reaction (HER) behavior of its carbonized derivative, a ferromagnetic superstructure, is revealed in a wide range of applied voltage under an AC magnetic field. The overpotential (@10 mA cm-2) required for the HER of the obtained ferromagnetic superstructure in 1 M KOH was reduced by 31 mV (7.7%) when a much small AC magnetic field (only 2.3 mT) is applied. Surprisingly, the promotion effect of the AC magnetic field is not monotonically increasing with the increase of the applied voltage or the strength of AC magnetic field, but increasing first, then weakening. This unusual behavior is believed to be mainly caused by the enhanced induced electromotive force and the additional energy by the applied AC magnetic field. This discovery provides a new idea for adjusting the performance of electrocatalytic reactions.

Fast Eruption Desorption Ionization for Mass Spectrometric Analysis.

Fast eruption desorption ionization (FEDI) technique was developed for simple, rapid, and sensitive analysis of various compounds. The FEDI allows three analytical modes each with the unique characteristic. The results demonstrated that non-assisted eruption was suitable for stable and volatile compounds, energetic material (EM)-assisted for nonvolatile molecules especially metal compounds, and solvent-assisted eruption for fragile molecules. High-quality mass spectra with intact ions of analytes were obtained in positive and negative ion modes. Graphical Abstract ᅟ.

Direct and Convenient Mass Spectrometry Sampling with Ambient Flame Ionization.

Recent innovations in ambient ionization technology for the direct analysis of various samples in their native environment facilitate the development and applications of mass spectrometry in natural science. Presented here is a novel, convenient and flame-based ambient ionization method for mass spectrometric analysis of organic compounds, termed as the ambient flame ionization (AFI) ion source. The key features of AFI ion source were no requirement of (high) voltages, laser beams and spray gases, but just using small size of n-butane flame (height approximately 1 cm, about 500 (o)C) to accomplish the rapid desorption and ionization for direct analysis of gaseous-, liquid- and solid-phase organic compounds, as well as real-world samples. This method has high sensitivity with a limit of detection of 1 picogram for propyphenazone, which allows consuming trace amount of samples. Compared to previous ionization methods, this ion source device is extremely simple, maintain-free, low-cost, user-friendly so that even an ordinary lighter (with n-butane as fuel) can achieve efficient ionization. A new orientation to mass spectrometry ion source exploitation might emerge from such a convenient, easy and inexpensive AFI ion source.