Enhancing bread preservation through non-contact application of starch-based composite film infused with clove essential oil nanoemulsion.

In this study, we have successfully produced a corn starch-based composite film through the casting method, formulated with clove essential oil nanoemulsion (NCEO) and corn starch. The physical and chemical changes of the composite films were investigated at various concentrations (10 %, 20 % and 40 %) of NCEO. Furthermore, the non-contact preservation effects of the composite films on bread during 15-day storage were also examined in this study. As the concentration of NCEO increased, the composite films presented a gradual thinning, roughening, and yellowing in appearance. Following this, the water content, water vapor permeability rate, and elongation at break of the films decreased, while their hydrophobicity, tensile strength, antioxidant and antimicrobial activity increased accordingly. Through FT-IR, X-ray diffraction and thermal gravimetric analysis, it was demonstrated that NCEO has strong compatibility with corn starch. Additionally, the indices' analysis indicated that utilizing the composite film incorporating 40 % NCEO can significantly boost the shelf life and quality of bread. Moreover, it was revealed that application of the non-contact treatment with composite film could potentially contribute certain preservation effects towards bread. In light of these findings, the composite film with non-contact treatment exhibits potential as an effective, safe, and sustainable preservation technique for grain products.

Heat-moisture treated waxy highland barley starch: Roles of starch granule-associated surface lipids, temperature and moisture.

Roles of temperature, moisture and starch granule-associated surface lipids (SGASL) during heat-moisture treatment (HMT) of waxy highland barley starch were elucidated. Starch without SGASL showed a higher increase in ratio (1016/993 cm-1) (0.095-0.121), lamellar peak area (88), radius of gyration (Rg1, 0.9-1.8 nm) and power-law exponents (0.19-0.42) than native starch (0.038-0.047, 46, 0.1-0.6 nm, 0.04-0.14), upon the same increase in moisture or temperature. Thus, removing SGASL promoted HMT. However, after HMT (30 % moisture, 120 °C), native starch showed lower relative crystallinity (RC, 11.67 %) and lamellar peak area (165.0), longer lamellar long period (L, 14.99 nm), and higher increase in peak gelatinization temperature (9.2-13.3 °C) than starch without SGASL (12.04 %, 399.2, 14.52 nm, 4.7-6.1 °C). This suggested that the resulting SGASL-amylopectin interaction further destroyed starch structure. Starch with and without SGASL showed similar trends in RC, lamellar peak area, L and Rg1 with increasing temperature, but different trends with increasing moisture, suggesting that removing SGASL led to more responsiveness to the effects of increasing moisture. Removing SGASL resulted in similar trends (RC and lamellar peak area) with increasing moisture and temperature, suggesting that the presence of SGASL induced different effects on moisture and temperature.

High-pressure pasting performance and multilevel structures of short-term microwave-treated high-amylose maize starch.

Microwave treatment is an environmentally friendly method for modification of high-amylose maize starch (HAMS). Here, the effects of short-time (≤120 s) microwave treatment on the structure and pasting of two types of HAMSs, Gelose 50 (HAMSI) and Gelose 80 (HAMSII), with apparent amylose content (AAC) of 45 % and 58 %, respectively, was studied using a multiscale approach including X-ray scattering, surface structures, particle size distribution, molecular size distributions and high temperature/pressure Rapid Visco Analysis (RVA)-4800 pasting. As compared to starch with no amylose (waxy maize starch, WMS) and 25 % amylose content (normal maize starch, NMS), HAMSI underwent similar structural and pasting changes as WMS and NMS upon microwave treatment, and it might primarily be attributed to the amylopectin fraction that was affected by cleavage of the connector chains between double helices and backbone chains, which decreased the crystallinity and thickness of the crystalline lamellae. However, the multi-scale structure of HAMSII was almost unaffected by this treatment. The pasting properties of fully gelatinized HAMSI starch showed a decrease in RVA-4800 peak and final viscosities after microwave treatment. In contrast, for HAMSII starch, the microwave treatment led to an increase in these viscosities. The combined results highlight the influence of varying AAC on the effects of microwave-mediated modification, leading to diverse alterations in the structure and functionality of starches.

Strategies for starch customization: Agricultural modification.

Raw starch is commonly modified to enhance its functionality for industrial applications. There is increasing demand for 'green' modified starches from both end-consumers and producers. It is well known that environmental conditions are key factors that determine plant growth and yield. An increasing number of studies suggest growth conditions can expand affect starch structure and functionality. In this review, we summarized how water, heat, high nitrogen, salinity, shading, CO2 stress affect starch biosynthesis and physicochemical properties. We define these treatments as a fifth type of starch modification method - agricultural modification - in addition to chemical, physical, enzymatic and genetic methods. In general, water stress decreases peak viscosity and gelatinization enthalpy of starch, and high temperature stress increases starch gelatinization enthalpy and temperature. High nitrogen increases total starch content and regulates starch viscosity. Salinity stress mainly regulates starch and amylose content, both of which are genotype-dependent. Shading stress and CO2 stress can both increase starch granule size, but these have different effects on amylose content and amylopectin structure. Compared with other modification methods, agricultural modification has the advantage of operating at a large scale and a low cost and can help meet the ever-rising market of clean-label foods and ingredients.

High-quality complete genome sequence of Xanthomonas oryzae pv. oryzicola (Xoc) strain HB8.

Here, we report a high-quality genome of Xanthomonas oryzae pv. oryzicola (Xoc) strain HB8, which causes bacterial leaf streaks in rice. The genome size of HB8 is 4,800,100 bp, with a GC content of 64.03%, which serves as an important resource for the study of the Xanthomonas-rice pathosystem.

Developments in small-angle X-ray scattering (SAXS) for characterizing the structure of surfactant-macromolecule interactions and their complex.

The surfactant-macromolecule interactions (SMI) are one of the most critical topics for scientific research and industrial application. Small-angle X-ray scattering (SAXS) is a powerful tool for comprehensively studying the structural and conformational features of macromolecules at a size ranging from Angstroms to hundreds of nanometers with a time-resolve in milliseconds scale. The SAXS integrative techniques have emerged for comprehensively analyzing the SMI and the structure of their complex in solution. Here, the various types of emerging interactions of surfactant with macromolecules, such as protein, lipid, nuclear acid, polysaccharide and virus, etc. have been systematically reviewed. Additionally, the principle of SAXS and theoretical models of SAXS for describing the structure of SMI as well as their complex has been summarized. Moreover, the recent developments in the applications of SAXS for charactering the structure of SMI have been also highlighted. Prospectively, the capacity to complement artificial intelligence (AI) in the structure prediction of biological macromolecules and the high-throughput bioinformatics sequencing data make SAXS integrative structural techniques expected to be the primary methodology for illuminating the self-assembling dynamics and nanoscale structure of SMI. As advances in the field continue, we look forward to proliferating uses of SAXS based upon its abilities to robustly produce mechanistic insights for biology and medicine.

Fabrication, characterization and potential application of biodegradable polydopamine-modified scaffolds based on natural macromolecules.

Sodium alginate (SA)-based implantable scaffolds with slow-release drugs have become increasingly important in the fields of biomedical and tissue engineering. However, high-molecular-weight SA is difficult to remove from the body due to the lack of SA-degrading enzymes. The very slow degradation properties of SA-based scaffolds limit their applications. Herein, we designed a series of biodegradable oxidized SA (OSA)-based scaffolds through amide bonds, imine bonds and hydrogen bridges between OSA and silk fibroin (SF). SF/OSA-0.4 with a blend ratio of 4/1 was chosen for further polydopamine (PDA) surface modification studies through the optimization of those parameters such as different OSA oxidation degrees, and blend ratios. PDA modified SF/OSA-0.4 (Dopa/SF/OSA-0.4) showed the excellent stability, better stretchable properties, a uniform interconnective porous structure, high thermal stability, a low hemolysis ratio and cytotoxicity. In vitro degradation experiments showed that the degradation rate of SF/OSA was significantly higher than that of SF/SA, but the degradation slowed again after PDA modification. Interestingly, the degradation of Dopa/SF/OSA-0.4 in vivo was significantly faster than that in vitro. Dopa/SF/OSA-0.4 was also more conducive to new tissue growth and collagen bundle formation. Moreover, Dopa/SF/OSA-0.4 improved the absorbability of RhB (model drug) and reduced the sudden release of RhB during the sustained release.

Periodic changes in chain lengths distribution parameters of wheat starch during endosperm development.

This study analyzed the molecular structure of developing wheat endosperm starch at different stages after anthesis (DAA) using chain length distribution analysis by size exclusion chromatography (SEC) and fluorophore-assisted carbohydrate electrophoresis. Our results revealed periodic changes in the content of both amylose and amylopectin fractions. Specifically, the content of amylose chains with a degree of polymerization (DP) > 100 significantly decreased from 5 to 10 DAA (28% to 21%) and from 15 to 20 DAA (29% to 26%), but increased between 10 and 15 DAA (21% to 29%) and 20 to 25 DAA (30.0% to 33%). Conversely, the content of short amylopectin chains with DP ≤ 32 showed the opposite trend. Interestingly, mRNA expression levels of key starch biosynthesis genes did not exhibit periodic changes. These findings contribute to our understanding of starch biosynthesis and provide important insights for the development of starch-based products.

Recent advances on bioactive compounds, biosynthesis mechanism, and physiological functions of Nelumbo nucifera.

Nelumbo nucifera Gaertn, commonly known as lotus, is a genus comprising perennial and rhizomatous aquatic plants, found throughout Asia and Australia. This review aimed to cover the biosynthesis of flavonoids, alkaloids, and lipids in plants and their types in different parts of lotus. This review also examined the physiological functions of bioactive compounds in lotus and the extracts from different organs of the lotus plant. The structures and identities of flavonoids, alkaloids, and lipids in different parts of lotus as well as their biosynthesis were illustrated and updated. In the traditional medicine systems and previous scientific studies, bioactive compounds and the extracts of lotus have been applied for treating inflammation, cancer, liver disease, Alzheimer's disease, etc. We suggest future studies to be focused on standardization of the extract of lotus, and their pharmacological mechanisms as drugs or functional foods. This review is important for the lotus-based food processing and application.

Removing starch granule-associated surface lipids affects structure of heat-moisture treated hull-less barley starch.

The effects of starch granule-associated surface lipids removal on hull-less barley starch structure formed by heat-moisture treatment were investigated. Removing surface lipids made the peak at 2θ of 13° disappear and resulted in higher lamellar peak intensity after harsh treatment and a lower reduction in mass fractal dimension (from 2.49 to 2.43) and radius of gyration (from 24.3 to 24.0) when temperature increased from 100 to 120 °C at 20 % moisture. Treatment at 25 % moisture and 120 °C decreased relative crystallinity (from 15.73 % to 7.43 %) and Gaussian peak area (from 646.7 to 137.7) of native starch, and decreased relative crystallinity (from 14.24 % to 12.56 %) and Gaussian peak area (from 604.1 to 539.6) for starch without surface lipids. Different trends of change in lamellar thickness, linear crystallinity, peak temperatures, and enthalpy of gelatinization were observed among modified starches with increasing temperature and/or moisture content. These results demonstrate that removing surface lipids changes structure of heat-moisture treated starch.

High-amylose starch: Structure, functionality and applications.

Starch with a high amylose (AM) content (high AM starch, HAS) has attracted increasing research attention due to its industrial application potential, such as functional foods and biodegradable packaging. In the past two decades, HAS structure, functionality, and applications have been the research hotspots. However, a review that comprehensively summarizes these areas is lacking, making it difficult for interested readers to keep track of past and recent advances. In this review, we highlight studies that benefited from rapidly developing techniques, and systematically review the structure, functionality, and applications of HAS. We particularly emphasize the relationships between HAS molecular structure and physicochemical properties.

The effects of fermentation of Qu on the digestibility and structure of waxy maize starch.

The fermentation of Qu (FQ) could efficiently produce enzymatically modified starch at a low cost. However, it is poorly understood that how FQ influences the waxy maize starch (WMS) structure and the digestion behavior. In this study, WMS was fermented by Qu at different time and starches were isolated at each time point, and its physico-chemical properties and structural parameters were determined. Results showed that the resistant starch (RS), amylose content (AC), the average particle size [D(4,3)] the ratio of peaks at 1,022/995 cm-1, and the onset temperature of gelatinization (T o ) were increased significantly after 36 h. Conversely, the crystallinity, the values of peak viscosity (PV), breakdown (BD), gelatinization enthalpy (ΔH), and the phase transition temperature range (ΔT) were declined significantly after 36 h. It is noteworthy that smaller starch granules were appeared at 36 h, with wrinkles on the surface, and the particle size distribution was also changed from one sharp peak to bimodal. We suggested that the formation of smaller rearranged starch granules was the main reason for the pronounced increase of RS during the FQ process.

High pressure/temperature pasting and gelling of starch related to multilevel structure-analyzed with RVA 4800.

This paper evaluated the relationship between multi-scale structure and high-pressure gelation properties of nine types of starches with different amylose (AM) content and crystalline polymorphic structure by RVA 4800. Higher average chain lengths of long amylopectin (AP) chains (DP > 36) and AM content, and lower relative content of short AP chains (DP ≤ 36) contributed to the higher peak temperature and peak time at 95-140 °C, and lower peak viscosity, through viscosity, and final viscosity at 95-110 °C. Rheological and texture parameters including storage modulus, loss modulus, hardness, and gumminess, had no significant correlation with starch structural parameters at 95-120 °C, but were instead controlled by AM molecular structure at 130-140 °C. AM content was mainly responsible for the rheological behaviors of starch gels at 130-140 °C, and short and intermediate AM chains were mainly associated with the texture of starch gels at the temperature ranges.

Different genetic strategies to generate high amylose starch mutants by engineering the starch biosynthetic pathways.

This review systematically documents the major different strategies of generating high-amylose (HAS) starch mutants aiming at providing high resistant starch, by engineering the starch biosynthesis metabolic pathways. We identify three main strategies based on a new representation of the starch structure: 'the building block backbone model': i) suppression of starch synthases for reduction of amylopectin (AP) side-chains; ii) suppression of starch branching enzymes (SBEs) for production of AM-like materials; and iii) suppression of debranching enzymes to restrain the transformation from over-branched pre-AP to more ordered AP. From a biosynthetic perspective, AM generated through the second strategy can be classified into two types: i) normal AM synthesized mainly by regular expression of granule-bound starch synthases, and ii) modified linear AP chains (AM-like material) synthesized by starch synthases due to the suppression of starch branching enzymes. The application of new breeding technologies, especially CRISPR, in the breeding of HAS crops is also reviewed.

The relationship between linear chain length distributions of amylopectin and the functional properties of the debranched starch-based films.

The relationship between linear chain length distributions and the functional properties of the starch-based films after pullulanase debranching treatment of corn (CS), rice (RS) and wheat (WS) were investigated. The results indicated that the film thickness was negatively correlated with A chains content (r = -0.939) and apparent amylose content (r = -0.926), and was positively correlated with B3 chains content (r = 0.847). The tensile strength of the debranched starch-based films were positively correlated with apparent amylose content (r = 0.813), and the elongation at break were inversely proportional to B3 chains content (r = -0.817). The hydrophobicity of the starch-based films was positively and negatively correlated with the proportions of linear chains with DP 6-12 (r = 0.892) and DP 25-36 (r = -0.863), respectively. On the contrary, no significant correlation was noticed between chain length distribution of amylopectin and transparency and thermal stability.

Multi-scale structure of A- and B-type granules of normal and waxy hull-less barley starch.

The multi-scale structure of combined (A- and B- type granules), A-type, and B-type granules from normal (NHB) and waxy hull-less barley (WHB) starch was studied, including crystalline structure, molecular branching, nanostructural and fractal characteristics. Particle size distribution was applied to determine the separation purity (>95%), and micrography was used to distinguish between the A-type and B-type granules. Lacking amylose, WHB had higher relative crystallinity, gelatinization temperature, enthalpy, level of scattering intensity and uniformity of orientation of double helices than NHB starch. Generally, B-type granules had higher gelatinization temperature, lower enthalpy, greater relative crystallinity, higher ratio of crystalline to amorphous region, more fa chains in amylopectin, and thicker semi-crystalline lamellae than A-type and combined granules. The results showed that the multi-scale structure of A-type and B-type granules differed greatly, and the characteristics of combined granules were not the same as those of its two constituent granule fractions.

Biosynthesis, structure and functionality of starch granules in maize inbred lines with different kernel dehydration rate.

In this study, we report important relationships between kernel starch and kernel dehydration rate for eight maize inbred lines with different dehydration characteristics. High-throughput RNA sequencing data of starch biosynthesis-related genes showed that kernel moisture content and dehydration rate were both associated with differential expression of most starch biosynthetic genes. Especially, kernel moisture content was positively correlated with the increased expression of SBEI and SBEIIb, thereby potentially inducing biosynthesis of amylose with low molecular weight and amylopectin with low content of amylopectin chains with degree of polymerization (DP) 6-12 in inbred lines with fast kernel dehydration rate. We found a negative correlation between short amylopectin chains (DP 6-12) and the starch retrogradation rate. Hence, a low amount of amylopectin chains with DP 6-12 in the inbred lines with fast kernel dehydration rate was a plausible reason for their high short- and long-term retrogradation.

Rice starch multi-level structure and functional relationships.

Starch from 15 different rice genotypes with amylose content (AC) ranging 1.5%-30.6% were investigated for relationships between structures and properties. For parameters related to the granular level, the most important relationships were found for AC, average chain lengths (ACL) of the amylopectin (AP) fb1 chains having a length of DP 13-24, crystallinity, and the thickness of the crystalline (dc) and the amorphous lamellae (da) of the starch granule. AC and dc were negatively correlated with the peak gelatinization temperature (Tp), thermal enthalpy (ΔH), and peak viscosity (PV), but positively correlated with swelling power. ACLfb1 and da, as compared to AC and dc, had the opposite effects on these parameters, demonstrating important roles of specific molecular and lamellar structures on the starch granular stability. For the gelatinized systems, increasing ACLfb1 decreased retrogradation, while AC increased retrogradation by increasing the resistant starch (RS) content, storage modulus (G'), and setback (SB).